I HAVE LENOVO3 7essential 710f
i first flashed its stock firmware but i forgot to untick preloader and proceed but after flashing when i trid to turn on my device its not showing any sign or symbol.And not even sp flash tool is detecting my device(i have installed all mtk usb drivers).please someone help me
Related
I have got a chinese clone phone with MTK6573V which was bricked by flashing a wrong firmware image via CWM-based custom recovery BUT after flashing the wrong firmware my phone cant even boot not even in recovery mode.Nor i am able to write Recovery via SP Flash Tool v2.1134.00 it always give me error :
BROM ERROR:S_DL_GET_DRAM_SETTING_FAIL(5054)
[EMI]obtain DRAM Failed!
[HINT]lease check your load matches to your target which is to be download.
http://img838.imageshack.us/img838/3817/mtkerror.jpg
My phone is only able to make MTK PRELOADER PORT nothing else, no back light, no recovery mode
And now my phone also dont make MT65x3 USB VCOM Port so i am only able to connect phone with SP TOOLS when DA DOWNLOAD ALL is enabled otherwise it wont connect
mtk6573
hello there
i read your post and you has exacly the same problem im having with my phone.
did you manage to solve the problem?
if you did can you please help me out.
Thx
I have the same problem.
It`s bricked, nothing works and i cannot even upload the preloader or anything
EDIT : Upgraded to latest SP Flash tool and now i get a new error 5007
I have the same problem in MTK6575. Any solution?
B.R.
check the following link may be that will be helpful for you guys
http://www.labandroid.com/china/2013/02/flash-cwm-recovery-to-mtk-phones-without-sp-flash-tool/
Bro I have alcatel 6043d (mtk 6592) and i format my whole flash with sp flash tools and now my phone doesnot booting and not showing anything but carging led in working when coNnecting to charger......now sp flashtools not detecting my phone please tell me how to detect phone with flash tools is ....is I need new drivers or what please help me
Help me restoring my Lenovo A536, i reflashed my Lenovo A536 using SP Flash Tool but I didn't notice that the Firmware that i used was OTA Firmware.
Is there any other way to restore my Phone?
My phone is Dead and cannot access Recovery Mode. But my Laptop can recognized my Phone when i insert USB Cable into it. When i try reusing SP Flash Tools it cannot detect my phone now. but before SP Flash recognized my Phone.
Please Help me. Thanks.
Hello experts,
Pointing to the title, it is very clear that I am trying to install preloader to LG K120E model MT6735 without success. I was using SP flash tool to auto format the whole flash(bootloader included) and now the phone is dead, not even recognized by pc. downloaded prerooted ROM from here https://forum.xda-developers.com/android/general/rom-lg-k4-k120e-prerooted-stock-rom-t3545353 and tried to install the preloader, but it fails with BROM ERROR message 5054. What the f*** is this problem now, Can you experts help me on this?
Hello and first of all i'm not sure if this is the correct place to post my question if not sorry i am new here.
well i have a oukitel wp6 phone that all of a sudden went into factory mode loop tried reeboting, wipe and restore factory settings many times and nothng so decided to flash with sp tool fist tried with tool from original oukitel page with costum rom diidn't work, so tried with sp tool and MTK tool had problems with verification tried 3 diffrent rom including custom rom from original oukitel page, same problem so tried bypassing with libusb and bypass utility master and exploits original MTK USB VCOM drivers all seemed to go well but when tried to flash with sp flash tool i must have done something very wrong now my phone is dead no light no boot the sp flash tool doesn't even reconize the phone when i try to flash the boot loader. anyway my question is is this it or is there still a posibility to recover my phone?
any help will be very apreciated.
thank you,
angel
nobody? any ideas?