iPega 9023s Android software overlay issue over screen projection - General Questions and Answers

Hi guys !
Got an iPega 9023 controller which I use on a daily basis in call of duty.
Connecting and setting up the controller through their app (ShootingPlusV3) and mapping the gamepads buttons on a screen overlay is fairly simple & straightforward and I am able to use the controller as intended.
BUT the problems start when I connect my phone (Huawei P30 Pro) either through a HDMI adapter or use the Wireless Projection mode to cast my screen to another device.
As soon as I cast my screen the overlay no longer matches the actual screen and appears to be tilted at 90⁰.
I even tried using another app that could enable me to set the rotation system wide, but the problem persists.
I have attached some screenshots for a better understanding of the issue.
Any suggestions would be greatly appreciated as I am pretty sure I am not the only one encountering this problem and would love to be able to use it while casting on a big screen.

Related

Real HDMI: Finally able to Control your HDMI!!

*Credit to gman!!! for his work enabling more control over the X's HDMI port.
"Real HDMI" is now on the android marketplace for $1.99
NO ROOT REQUIRED, WORKS ON 2.1 AND LEAKED 2.2
Finally get control of your HDMI port on your Droid X. This is rev 1.0.3 of the app and will be continuing development down the road.
What is Does:
When HDMI is enabled it sends the output that would normally going to your phone to the HDMI output port. It unfortunatly doesn't allow mirroing of the display. But does let you watch content on your big screen. Ability of content to display properly depends on the ability of the app you are using to scale to large size of TV screen. If uses absolute coordinates for its layout it might not scale properly.
Am going to be putting together a list of what apps work and don't as I get reports from folks.
Quick Help
- Enabling HDMI Output
Hook up your cable to the phone. When connected the “DETECT” button should change to an “ON” button and “HDMI Detected” status should turn to “Yes”.
If it does not, click on the DETECT button and check your cable and TV Settings.
Once the green button displays “ON” you can click the green button to turn the HDMI output on.
Alternatively you can go to the notification bar, and when it says HDMI = OFF, you can click on the notification icon to turn HDMI ON.
- Disabling HDMI (returning to seeing content on phone)
There are 4 ways to disable HDMI output.
#1 When Real HDMI application has focus, you can change orientation of the device.
#2 You can unplug the HDMI Cable
#3 When Real HDMI application in on the screen on your TV, click appropriate location for red OFF button on the screen.
#4 With HDMI on, go to notification bar and click on the notification
- Using Dock Modes
The Application provides the ability to simulate the doc modes for your phone. Selecting the Car Dock will enable the Car Dock Home screen.
Selecting the Media Dock will enable the Media Dock Home Screen.
Clicking Dock Off will restore phone to non-docked status
- Application Problems
Some applications will have problem displaying video to HDMI as they are build with assumptions about screen sizes. They are using fixed layouts and not proper auto sizing layouts as per Android developers guides. Only way to fix those issues is to have the app developer of the application fix their application.
Enabling or Disabling HDMI out while a video is playing can have strange results as the rendering surface size ends up changing mid video. Stop and Start the application and it should be fine.
EDIT: things to look forward to as this is early in development!
- Independent control of audio out (mute, hdmi audio only with no video, etc)
- better HDMI on/offcontrol. Things like shake for on, shake phone for off. Timed enable of HDMI. HDMI on/off based on proximity sensor(I like this one the best so far)
- "snapshots" - idea being to perodically take a snapshot of HDMI out frame buffer and output to the phones screen. to at least give you some better input interface
- the whole "live dual view" thing
- screen orientation issues (getting home screen to be horizontal)
So does this mean blockbuster app might actually be worth a s#*$. Too bad they are filing bankruptcy...wait on netflix app
Sent from my DROIDX using XDA App
yeah! haha, too bad! goo netflix!
ohh! and emulators work awesome!
I've BEEN PUTTING OFF PURCHASING A CORD FOR THAT REASON. Might get one now....thanks for the work!!!!!!
1 N 5 PEOPLE R MENTALLY UNSTABLE. IF YOUR FOUR CLOSEST FRIENDS SEEM NORMAL....THEN ITS YOU.
AWESOME!! Been waiting for something like this!
Blockbuster app is currently a no go as they did somethings in the app to make sure it won't work with HDMI on. Am still looking into it. My app doesn't support "Dual View" or "Multi-view" or whatever folks choose to call it. This is basically a limitation in the omap3 chip as it only has one LCD controller in it and can either control the HDMI output or the LCD but not both.
App only works on Droid X as its a specific solution to controlling the hardware/gpu on the droid x. And am doing my best to get around the limitations in the hardware such as the inability of the gfx overlay to do surface scaling.
My goal was to get out an app that worked for everyone without having to root their phone. Now that I have done that am working on features specific to users with root.
For time being my semi-official support thread is over on droidxforums.com under the app section. Over the weekend hope to get a website setup where I can better posts faqs, pictures, tutorials etc.
It is a shame that blockbuster is set on self destruction. I remember going there as a kid...
Sent from my DROIDX using XDA App
[Moved reply to another thread]
How come this isn't in the android market? I searched for "HDMI" and "Real HDMI" and nothing comes up.
xoxidine said:
How come this isn't in the android market? I searched for "HDMI" and "Real HDMI" and nothing comes up.
Click to expand...
Click to collapse
The authors web site explains why
http://www.gmanapps.com

Emulator output blurry over HDMI

I have tried a number different emulators on my TF700 and I have found that a number of them (SuperGNES) for instance, will display fine on the tablet but their output is blurry on the TV via HDMI. The screen will even sharpen up for a second when I swap to another app or a menu but when playing it goes blurry. All other pps seem to display fine. Is anyone else experiencing this issue or knows of a solution?
Thanks
UPDATE: Retroarch seems to work fine but I can't seem to get it to work with my 8bitty or my onlive universal controller
beowolfschaefer said:
I have tried a number different emulators on my TF700 and I have found that a number of them (SuperGNES) for instance, will display fine on the tablet but their output is blurry on the TV via HDMI. The screen will even sharpen up for a second when I swap to another app or a menu but when playing it goes blurry. All other pps seem to display fine. Is anyone else experiencing this issue or knows of a solution?
Thanks
UPDATE: Retroarch seems to work fine but I can't seem to get it to work with my 8bitty or my onlive universal controller
Click to expand...
Click to collapse
Prob the emulator itself. Is it stretching the screen for a standard definition out put rather than HD? Time to contact the emulator maker. it may look fine on the tab but that is because the screen is much smaller.

[Q] Android stick + portrait mode

Hey guys,
I'm currently working on a dashboard, developed in HTML and CSS and i want to display this dashboard on a tv screen (screen hanging vertically). The problem is that the TV screen itself does not have a native portrait mode so i googled around and found the android stick which "might" solve this issue.
Is there any android stick you guys know of that can force the display (of say an app like Chrome) into portrait mode? I have a google chromecast but it doesnt seem to do the trick.
Try the app ultimate Rotation control. This fixed my problem the other way round. https://play.google.com/store/apps/details?id=nl.fameit.rotate

[Q] Chromecast screen casting with CM11S

I upgraded to CM11S hoping to take advantage of the Chromecast's ability to cast screens from any 4.4.2+ device. I have the option available in the Chromecast app but when I try to cast my screen it doesn't seem to work. At first it lets me choose the Chromecast to cast to, then I get a dialog box that says it's connected. The Chromecast on my TV goes black for a second then back to the screensaver. On my phone I have a dialog box that says it has been disconnected. Has anyone gotten casting to work on this phone?
Alternatively I went into Settings>>Display & Light on clicked on Cast Screen. I turned it on but it says no devices found.
Is it possible I'm having a router problem?
I have exactly the same question! But in my case it isn't router problem because screen cast works in my tablet. Any further idea?

Easy connect problem with touch screen

I have a samsung note 8 and mi pro 5 and an atoto a6 pro aftermarket car display. I screen mirror from my phone to the display using an USB and the app EasyCon . In easy connect app car display can control touch screen of my phone but when go to navigation app or else where it gives me an error message "Currently does not support the operation of the car display" and I cannot use my display touch screen to control it. It's basically acting like I'm mirroring to a non touchscreen .
Any advice ???
It is a bug with the app and android 10 has been a problem for some time and Noone seems to have found a fix. My truck has the same app and I can't use the screen as intended because of it. I'm considering installing an aftermarket head unit to fix the problem

Categories

Resources