Ok so I just acquired an S6 (AT&T, OEM/not rooted) and I know that 7.0 is rolling out for it and after some investigating it seems that the only way I'll be able to update it to 7.0 from 6.0.1 is if my baseband is at a certain version, which it is not. There are 3 listed updates for this phone on the At&T site that I don't seem to have (SPL Nov 1, SPL Dec 1 & SPL Jan 1) and I'm wondering how I can apply these updates and at least have my phone up to date. I've tried checking OTA updates and also installing SmartSwitch and it says that my phone is currently updated and doesn't offer any patches. Any help is appreciated!
Here's a screenshot of where I'm at now-
http://imgur.com/a/PcnFQ
you can get better support here https://forum.xda-developers.com/att-galaxy-s6
as this forum is for s6 international 920f/i/k/s
For international models, you usually find a firmware on sammobile and flash through ODIN, following instructions under the firmware on sammobile website.
mrdigit420 said:
you can get better support here https://forum.xda-developers.com/att-galaxy-s6
as this forum is for s6 international 920f/i/k/s
For international models, you usually find a firmware on sammobile and flash through ODIN, following instructions under the firmware on sammobile website.
Click to expand...
Click to collapse
Whoops, sorry about that. I'll direct my inquiry over there. Thanks!
Im using s7 g930t in outside USA (unlocked), there is notification to update software (probably nougat). If i update via ota still unlocked?
achmthidyt said:
Im using s7 g930t in outside USA (unlocked), there is notification to update software (probably nougat). If i update via ota still unlocked?
Click to expand...
Click to collapse
If it was factory unlocked then even if you take the upgrade it will remain unlocked.
Hi.
I have a G955U Galaxy S8+ AT&T Factory Unlocked on Android 7.0
Baseband Version: G955USQU1AQD9
Android Security Patch Level - April 1, 2017
I no longer live in the US, and currently in the Philippines. Phone works great and the signal is too and all, but I cannot get OTA updates.
Can I just download the firmware file in this thread and flash straight through ODIN, or do I need to follow another guide?
Thanks in advance
You can, however there are specific sequences to follow, so you have to update in firmware released order.
I encountered the same problem so I downloaded odin that worked for Nougat and loaded all version to BRB1 I think it is and then went to Oreo. Currently on CRC5.
Another note, when you are about to hit Oreo you will need to download the odin that works for Oreo. It can be found in the CRC5 thread.
Happy Updating
onedonrazor said:
You can, however there are specific sequences to follow, so you have to update in firmware released order.
I encountered the same problem so I downloaded odin that worked for Nougat and loaded all version to BRB1 I think it is and then went to Oreo. Currently on CRC5.
Another note, when you are about to hit Oreo you will need to download the odin that works for Oreo. It can be found in the CRC5 thread.
Happy Updating
Click to expand...
Click to collapse
Is this really necessary?
I want to update to Oreo as well but since I'm AT&T unlocked and not currently using AT&T network I'm stuck in the June software update so I'll have to flash like 7-8 firmware updates and each one being about 2-3 GB to download.
Also, is there any stock Samsung firmware I can download so I can avoid having to manually flash every software update? Or am I just stuck with the AT&T firmware?
Thanks in advance.
I'm also having this problem. Need to flash the updates through ODIN but I can't find every single stock file leading up to BR9 on this site. Do I really have flash them all? Or is there another way?
i got the latest security update via OTA and an now running the G930UUEU9CSA3 firmware, ive tried flashing the eng boot img i originally used to root from here "https://forum.xda-developers.com/verizon-s7-edge/how-to/root-s7-s7edge-oreo-nougat-t3819616" but odin fails every time, i'm pretty sure its because the new security update updated the bootloader also... to version 9. now i guess my question is are there any eng boot files for the v9 bootloader available yet? or any other usable root methods available?
snaksalot said:
i got the latest security update via OTA and an now running the G930UUEU9CSA3 firmware, ive tried flashing the eng boot img i originally used to root from here "https://forum.xda-developers.com/verizon-s7-edge/how-to/root-s7-s7edge-oreo-nougat-t3819616" but odin fails every time, i'm pretty sure its because the new security update updated the bootloader also... to version 9. now i guess my question is are there any eng boot files for the v9 bootloader available yet? or any other usable root methods available?
Click to expand...
Click to collapse
That wasn't very clever was it.
Should never update branded unless it's to fix a major bug. Any loophole which allows root or flash is closed on an update until someone figures out how to root on the new boot loader.
I think the best advice to anyone on US networks is to flash unbranded and go from there.
snaksalot said:
i got the latest security update via OTA and an now running the G930UUEU9CSA3 firmware, ive tried flashing the eng boot img i originally used to root from here "https://forum.xda-developers.com/verizon-s7-edge/how-to/root-s7-s7edge-oreo-nougat-t3819616" but odin fails every time, i'm pretty sure its because the new security update updated the bootloader also... to version 9. now i guess my question is are there any eng boot files for the v9 bootloader available yet? or any other usable root methods available?
Click to expand...
Click to collapse
Get magisk.zip from internet , move to a sdcard insert sdcart to s7, Flash twrp for s7 then format data then click install magisk.zip reboot after finish and done.
kpwnApps said:
Get magisk.zip from internet , move to a sdcard insert sdcart to s7, Flash twrp for s7 then format data then click install magisk.zip reboot after finish and done.
Click to expand...
Click to collapse
I'm fairly certain that the only twrp for the s7 is a temporary one because there is no unlock for the bootloader, and even still the temp twrp is only compatible with the v4 bootloader and I am currently on v9.... that is unless I'm mistaken if I am then please someone correct me and point me in the right direction because I'd love to be running magisk on my s7 : )
cooltt said:
That wasn't very clever was it.
Should never update branded unless it's to fix a major bug. Any loophole which allows root or flash is closed on an update until someone figures out how to root on the new boot loader.
I think the best advice to anyone on US networks is to flash unbranded and go from there.
Click to expand...
Click to collapse
No it most definitely was not very clever at all and unfortunately I'm stuck : / Also is the G930UUEU9CSA3 firmware not unbranded?
snaksalot said:
No it most definitely was not very clever at all and unfortunately I'm stuck : / Also is the G930UUEU9CSA3 firmware not unbranded?
Click to expand...
Click to collapse
Yes it is I didn't read properly. Anyway what odin are you using to flash? The modified one?
We are talking about a qualcomm device yes?
cooltt said:
Yes it is I didn't read properly. Anyway what odin are you using to flash? The modified one?
We are talking about a qualcomm device yes?
Click to expand...
Click to collapse
Yes I'm using the modified Odin and all my previous attempts at flashing the eng boot files via Odin on the v8 bootloader have been successful, it wasn't until after the OTA that I started having issues.
And yes this is Qualcomm : )
snaksalot said:
Yes I'm using the modified Odin and all my previous attempts at flashing the eng boot files via Odin on the v8 bootloader have been successful, it wasn't until after the OTA that I started having issues.
And yes this is Qualcomm : )
Click to expand...
Click to collapse
Hmmm so it may be that loophole is now closed, what you need to think about is if you deffo need root? Or is it just nice to have. I'm sure a dev will get round it soon.
snaksalot said:
I'm fairly certain that the only twrp for the s7 is a temporary one because there is no unlock for the bootloader, and even still the temp twrp is only compatible with the v4 bootloader and I am currently on v9.... that is unless I'm mistaken if I am then please someone correct me and point me in the right direction because I'd love to be running magisk on my s7 : )
Click to expand...
Click to collapse
Twrp will work certainly, i did on my own s7 qualcomm variant with this https://www.google.com/amp/s/forum....de-how-to-root-android-8-0-oreo-t3840271/amp/
kpwnApps said:
Twrp will work certainly, i did on my own s7 qualcomm variant with this https://www.google.com/amp/s/forum....de-how-to-root-android-8-0-oreo-t3840271/amp/
Click to expand...
Click to collapse
Okay I was completely unaware of TWRP being an option or the possibility of Magisk with a locked bootloader, now to clarify I'm running the latest unbranded US Region firmware for the US T-Mobile version of the Qualcomm Galaxy S7 "(TMB) G930UUEU9CSA3" that being said I have a few questions about how to specifically to proceed if you don't mind helping me?
First is the version of Odin available from the post provided above inst the modified version I've been required to use for all my previous flashing "Odin3_v3.13.1_3B_PatcheD" should I use this one or the version provided in the post above "Odin3_v3.13.1"?
My next question is that all the different versions and variants of TWRP available for my device the Galaxy S7 and the S7 Edge are either for Exynos Canada/International or Korea or the Chinese Qualcomm variant of each. Should I download and use the TWRP for the Chinese Qualcomm S7?
The sammobile link in the original post for "Android 8.0 Oreo Stock Rom" provides me with a list of the latest and up to date international versions of firmware for the Galaxy S7 Edge "SM-G935FD" I'm assuming I should just use the stock firmware image for my device "SM-G930U" instead?
The link for the no-verity-opt-encrypt-6.0 is dead but I don't think its needed because of something someone said in the original post about this method failing after latest security update "the one I'm on" https://forum.xda-developers.com/showpost.php?p=78115895&postcount=18 he said he solved it easily with information and another flash able zip from this post https://forum.xda-developers.com/showpost.php?p=77000849&postcount=47 and the zip from here https://forum.xda-developers.com/showpost.php?p=76564735&postcount=37
All that being said I haven't attempted anything yet, I'll try the above method as I understand it later this evening and I'll post my results
snaksalot said:
All that being said I haven't attempted anything yet, I'll try the above method as I understand it later this evening and I'll post my results
Click to expand...
Click to collapse
Hello there, i deleted most of your post because i didn't want my post to be huge. So if i just give you some guidelines hopefully you can have a look around for the files you need.
1. For Qualcomm / snapdragon devices you must always use the patched version of Odin you already have. Now this version of Odin can be dangerous if you don't flash the correct firmware for your device because it ignores device mismatch and other safety measures the normal Odin checks for before flashing. Which brings me to.....
2. Anything for G935 will not work for G930 including TWRP, you must always use firmware, patches twrp which specifically says it for G930 Qualcomm/snapdragon devices.
3. The China/ Korea Qualcomm/snapdragon devices are exactly the same as the US devices, anything working on the China / Korea devices will work on the US device.
Now i know you want to root unbranded on V9 but as you are on the T Mobile network it may be easier to flash and root T Mobile Oreo for the time being until there is a workaround root for V9 unbranded.
All of the threads you linked to were for G935 devices and i've mentioned you can't use those patches BUT the process and step by step instructions you follow are the same for your device. So you can follow those guides as long as you are using the patches for your device.
There is a Snapdragon section on this forum so thats a good place to look.
I've had a quick look for this specific firmware and can't find anything about rooting the U9 version yet.....
I'm just checking this firmware G930UUEU9CSA3 your running did have either XAA or USC code next to it when you downloaded? I've noticed Verizon, AT&T and Sprint are using the same firmware VZN, ATT, XAS.
cooltt said:
Hello there, i deleted most of your post because i didn't want my post to be huge. So if i just give you some guidelines hopefully you can have a look around for the files you need.
1. For Qualcomm / snapdragon devices you must always use the patched version of Odin you already have. Now this version of Odin can be dangerous if you don't flash the correct firmware for your device because it ignores device mismatch and other safety measures the normal Odin checks for before flashing. Which brings me to.....
2. Anything for G935 will not work for G930 including TWRP, you must always use firmware, patches twrp which specifically says it for G930 Qualcomm/snapdragon devices.
3. The China/ Korea Qualcomm/snapdragon devices are exactly the same as the US devices, anything working on the China / Korea devices will work on the US device.
Now i know you want to root unbranded on V9 but as you are on the T Mobile network it may be easier to flash and root T Mobile Oreo for the time being until there is a workaround root for V9 unbranded.
All of the threads you linked to were for G935 devices and i've mentioned you can't use those patches BUT the process and step by step instructions you follow are the same for your device. So you can follow those guides as long as you are using the patches for your device.
There is a Snapdragon section on this forum so thats a good place to look.
I've had a quick look for this specific firmware and can't find anything about rooting the U9 version yet.....
I'm just checking this firmware G930UUEU9CSA3 your running did have either XAA or USC code next to it when you downloaded? I've noticed Verizon, AT&T and Sprint are using the same firmware VZN, ATT, XAS.
Click to expand...
Click to collapse
I'd be interested to know how this turned out if the device with V9 bootloader could be rooted with temp TWRP method.
Can i actually flash magisk on my 930u?
Is there any way to root my g930t ?
I'm on v9 bootloader, and i don't care about knox tripping.
Did developpers really failed to break the security of this little old device ? Or no one worked it ?
cooltt said:
Hello there, i deleted most of your post because i didn't want my post to be huge. So if i just give you some guidelines hopefully you can have a look around for the files you need.
1. For Qualcomm / snapdragon devices you must always use the patched version of Odin you already have. Now this version of Odin can be dangerous if you don't flash the correct firmware for your device because it ignores device mismatch and other safety measures the normal Odin checks for before flashing. Which brings me to.....
2. Anything for G935 will not work for G930 including TWRP, you must always use firmware, patches twrp which specifically says it for G930 Qualcomm/snapdragon devices.
3. The China/ Korea Qualcomm/snapdragon devices are exactly the same as the US devices, anything working on the China / Korea devices will work on the US device.
Now i know you want to root unbranded on V9 but as you are on the T Mobile network it may be easier to flash and root T Mobile Oreo for the time being until there is a workaround root for V9 unbranded.
All of the threads you linked to were for G935 devices and i've mentioned you can't use those patches BUT the process and step by step instructions you follow are the same for your device. So you can follow those guides as long as you are using the patches for your device.
There is a Snapdragon section on this forum so thats a good place to look.
I've had a quick look for this specific firmware and can't find anything about rooting the U9 version yet.....
I'm just checking this firmware G930UUEU9CSA3 your running did have either XAA or USC code next to it when you downloaded? I've noticed Verizon, AT&T and Sprint are using the same firmware VZN, ATT, XAS.
Click to expand...
Click to collapse
Would this info be applicable to edge models as well? Pretty sure our moderator has moved on as he is disgusted with samsungs persistance in blocking root with new bl versions. Im on an unlocked tmo s7 edge with the u firmware as well.
Toolmighty said:
Would this info be applicable to edge models as well? Pretty sure our moderator has moved on as he is disgusted with samsungs persistance in blocking root with new bl versions. Im on an unlocked tmo s7 edge with the u firmware as well.
Click to expand...
Click to collapse
Yes same hardware
cooltt said:
Yes same hardware
Click to expand...
Click to collapse
Can't get twrp to flash. Tried w rom as is, tried factory reset tried reinstall w/o auto reboot. All get same error
what about jruze root?
what about https://forum.xda-developers.com/verizon-s7-edge/how-to/root-s7-s7edge-oreo-nougat-t3819616 then flash from safestrap, format data, decript script?
nm it uses flashfire
Toolmighty said:
what about https://forum.xda-developers.com/verizon-s7-edge/how-to/root-s7-s7edge-oreo-nougat-t3819616 then flash from safestrap, format data, decript script?
Click to expand...
Click to collapse
Yes by using 1st and #1623 post number it can be rooted easily. I already have done that on both G930P and G930U.
Hi, I received a replacement phone from my phone carrier and I'm unable to receive OTA updates and I can't update it using the computer. I'm not sure how to update it using Odin, or what version of firmware I should use. I am sure that the phone has never been updated because it's on the July 2020 update. It is unlocked but was previously on ATT. I am a Tmobile customer, and I'm not sure if I should use Tmobile or ATT? Should I flash all of the updates in order to catch up, or just the latest? Thank you so much for all of your help.
Hi use Samsung Phone info app: https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo.plus&hl=en_US&gl=US
With this app you can see phone region code and more, that way you can see firmware that you will need and go to samsung firmware page and download the latest one available...
Teddy Lo said:
Hi use Samsung Phone info app: https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo.plus&hl=en_US&gl=US
With this app you can see ohone region code and more, that way you can see firmware that you will need and go to samsung firmware page and download the latest one available...
Click to expand...
Click to collapse
Thank you