After I install Magisk 19.3 it keeps crashing my Pixel 2.
I installed it using TWRP. When I try to open Magisk, it will crash and go back to the lock screen. If I open another app, it will crash and go back to the lock screen too.
If Magisk isn't installed, I can still open apps, etc...but I can't use Google Pay, etc. because it doesn't hide the root.
Any advice? I'm on the Android 9.0. Just updated to the June security patch.
I attached a screenshot of my Magisk.
upperbladez said:
After I install Magisk 19.1 it keeps crashing my Pixel 2.
I installed it using TWRP. When I try to open Magisk, it will crash and go back to the lock screen. If I open another app, it will crash and go back to the lock screen too.
If Magisk isn't installed, I can still open apps, etc...but I can't use Google Pay, etc. because it doesn't hide the root.
Any advice? I'm on the Android 9.0. Just updated to the June security patch.
I attached a screenshot of my Magisk.
Click to expand...
Click to collapse
Try using Magisk 19.3. I just installed TWRP and Magisk 19.3 this week and it's fine for me on the June security patch.
SlimSnoopOS said:
Try using Magisk 19.3. I just installed TWRP and Magisk 19.3 this week and it's fine for me on the June security patch.
Click to expand...
Click to collapse
Sorry, my OP has a typo. It was 19.3
upperbladez said:
After I install Magisk 19.3 it keeps crashing my Pixel 2.
I installed it using TWRP. When I try to open Magisk, it will crash and go back to the lock screen. If I open another app, it will crash and go back to the lock screen too.
If Magisk isn't installed, I can still open apps, etc...but I can't use Google Pay, etc. because it doesn't hide the root.
Any advice? I'm on the Android 9.0. Just updated to the June security patch.
I attached a screenshot of my Magisk.
Click to expand...
Click to collapse
Try the magisk uninstaller.zip Then re flash the magisk zip
Had anyone tried Magisk 20.2 and manager 7.5.0?
Is it bootloop free with OS 10?
I updated to the canary release through TWRP and I've been good. I'd expect you won't boot loop, but do a backup first if you can.
I updated thru mm ( after updating mm thru mm) and installed the recommended way in app. No issues.
LG G6 Pie
just updated to M 20.2 my LG G6 H870 Pie thru mm and got into bootloop. no way out and reset phone with LG Bridge (LGup not working for me since 9.0) without data loss. tried again from twrp and bootloop again. now flashing last 20.1 and won't install till next update.
I have latest Magisk Canary & Magisk Manager Canary from today, 02.01.2020. Working fine.
Did the Direct Install and all up to date! ?
I have OP6T with Android 10 AND recently updated to magisk 20.2 and Is working fine for me
Modules don't work in Magisk 20.2. They get installed but they don't take effect. I have to go back to Magisk version 20.1.
bjm51591 said:
Modules don't work in Magisk 20.2. They get installed but they don't take effect. I have to go back to Magisk version 20.1.
Click to expand...
Click to collapse
They work fine for me.
No problems here
fix Magisk 20.3
charliezulu said:
just updated to M 20.2 my LG G6 H870 Pie thru mm and got into bootloop. no way out and reset phone with LG Bridge (LGup not working for me since 9.0) without data loss. tried again from twrp and bootloop again. now flashing last 20.1 and won't install till next update.
Click to expand...
Click to collapse
Hi, just installed 20.3 and all is working; reading the log, problems for 20.2 were known with LG.
All is ok!
20.3 everything work fine!
Hi to everyone I'm on magisk 20.1, can I update directly to magisk 20.3 via magisk manager or before I've to uninstall some modules (maybe oos native call) like rom update?
giacomowrc said:
Hi to everyone I'm on magisk 20.1, can I update directly to magisk 20.3 via magisk manager or before I've to uninstall some modules (maybe oos native call) like rom update?
Click to expand...
Click to collapse
I've never had to uninstall modules to update Magisk (I have Swift Installer and xXx modules). Just update the manager app and do direct install of the update.
Hello,
i'm trying to install Magisk 20.4 on my mobile, but it is pretty impossible.
I installed correctly TWRP, Magisk Manager, no-verify-opt-encrypt-6.0 and RMM_bypass_V3_corsicanu.
The problem is that when I have to install real magisk it always fail, both from direct installation and from TWRP.
Do you have any solution?
According to a more skilled friend, the problem is that my mobile is updated to last week release and I have to wait a couple of week to let Magisk to be update to my version.
What do you think?
Thank you in advance for your help.
Hi all,
my brother-in-law has as Nord. I rooted his phone some time ago with Magisk 20.4. After this he installed several system updates with applying Magisk to the OTA slot on his own, w/o problems.
Yesterday he bricked the phone by applying the same procedure as always. The device was "in an unstable state". Fortunately, after some emails back and forth, he was able to fastboot it from the other slot.
Now he worries to install the system update again.
tl;dr
In the Magisk Manager 21.2 currently is shown.
Is there is any known problem with Magisk 21.2 and the Nord with Android 10?
Thanks
I had rooted my Samsung Galaxy Note 8 using TWRP (latest version) and Magisk version 23.0. Everything worked well until 2 days ago when magisk auto updated to version 24.1.
After this, all the options available on 3home page disappeared except option to install magisk 24.1 and magisk app.
I was expecting gydisk OP to be available as seen in various screenshots from internet about magisk 24.1 but unfortunately, didn't see any option to enable it (Screenshot attached).
Thinking the magisk update may gone haywire, reinstalled the stock firmware for my Galaxy Note 8 phone, flashed TWRP, RMM_Bypass_v3_corsicanu.zip, Disable_Dm-Verity_ForceEncrypt_11.02.2020.zip, Magisk 24.1, successfully.
However when rebooted into system, the magisk app still showed no option for Gydisk or any other option except previously mentioned above I.e Install magisk or magisk app.
Have checked & found OEM unlocking and USB debugging is still open.
Now I am lost and wondering where could I be going wrong.
Appreciate very much if someone can guide me in right direction in getting Gydisk option si that I can pass the safety check and hide magisk.
Your screenshot shows that Magisk is not installed.
You only installed the app. Try install in the upper right corner and choose for direct install without patching.
Prof_Shekhar said:
I had rooted my Samsung Galaxy Note 8 using TWRP (latest version) and Magisk version 23.0. Everything worked well until 2 days ago when magisk auto updated to version 24.1.
After this, all the options available on 3home page disappeared except option to install magisk 24.1 and magisk app.
I was expecting gydisk OP to be available as seen in various screenshots from internet about magisk 24.1 but unfortunately, didn't see any option to enable it (Screenshot attached).
Thinking the magisk update may gone haywire, reinstalled the stock firmware for my Galaxy Note 8 phone, flashed TWRP, RMM_Bypass_v3_corsicanu.zip, Disable_Dm-Verity_ForceEncrypt_11.02.2020.zip, Magisk 24.1, successfully.
However when rebooted into system, the magisk app still showed no option for Gydisk or any other option except previously mentioned above I.e Install magisk or magisk app.
Have checked & found OEM unlocking and USB debugging is still open.
Now I am lost and wondering where could I be going wrong.
Appreciate very much if someone can guide me in right direction in getting Gydisk option si that I can pass the safety check and hide magisk.
Click to expand...
Click to collapse
xabu said:
Your screenshot shows that Magisk is not installed.
You only installed the app. Try install in the upper right corner and choose for direct install without patching.
Click to expand...
Click to collapse
Thank you xabu for your reply.
I had tried to install it numerous times using the direct install method as suggested by you but it gives me a "installation failed" message (Screenshot attached).
Also, presuming that my previously installed magisk v 23.0 may not have been uninstalled during the process of auto update to magisk version 24.1 (only 24.1 app installed but not magisk itself not upgraded due to unknown reasons), I reinstalled the app v 23 and uninstalled magisk completely. Frustrated, I installed the stock firmware again, reinstalled TWRP and flashed magisk 24.1. However, the result appears to be same. No magisk installation.
It appears to me that magisk v 23 is not yet completely uninstalled as if I delete this 24.1 app, reinstall app for 23.1 most of the functionality comes back though not all. I still can't hide magisk but it passes safety check.
Also I have tried to uninstall any previous version of magisk using renamed magisk app as uninstall.zip via TWRP. Also I get following message:
"cannot find vbmeta partition, patch vbmeta in boot image.
Removing magisk files."
Now when I go to Magisk app, I get only option to "select and patch a file."
Appreciate if anyone can suggest me a way forward.
Also, I get the vbmeta partition not found error while trying to install Magisk via TWRP (screenshot attached)
I have selected and installed Magisk patched boot image file using ODIN3. Removed TWRP. Tried to install using Magisk app 24.1 but get installation failed due to unable to check signature (screenshot attached).
Request some guidance.
Start here ....
Magisk - The Age of Zygisk.​Your questions are very interesting but too difficult for me to answer. Magisk 24.1 normally replaces the 23 almost automatically .... By uninstalling the module the situation becomes completely different and you should probably start from scratch. In my link "start here" you'll find the place where real specialists are.
Wishing you all the best !
Appreciate your advice.
However, I have reinstalled the stock firmware 3 times since this morning just as to ensure that I start from a clean slate. Also used Adb commands to uninstall any remanants of the previous Magisk manager if at all left there.
However, still stuck with the puzzling question as to where am I going wrong.
Prof_Shekhar said:
Also I have tried to uninstall any previous version of magisk using renamed magisk app as uninstall.zip via TWRP. Also I get following message:
"cannot find vbmeta partition, patch vbmeta in boot image.
Removing magisk files."
Now when I go to Magisk app, I get only option to "select and patch a file."
Appreciate if anyone can suggest me a way forward.
Click to expand...
Click to collapse
Exact same issue for me!
Also for me....same tests that @Prof_Shekhar have done
Prof_Shekhar said:
I had rooted my Samsung Galaxy Note 8 using TWRP (latest version) and Magisk version 23.0. Everything worked well until 2 days ago when magisk auto updated to version 24.1.
After this, all the options available on 3home page disappeared except option to install magisk 24.1 and magisk app.
I was expecting gydisk OP to be available as seen in various screenshots from internet about magisk 24.1 but unfortunately, didn't see any option to enable it (Screenshot attached).
Thinking the magisk update may gone haywire, reinstalled the stock firmware for my Galaxy Note 8 phone, flashed TWRP, RMM_Bypass_v3_corsicanu.zip, Disable_Dm-Verity_ForceEncrypt_11.02.2020.zip, Magisk 24.1, successfully.
However when rebooted into system, the magisk app still showed no option for Gydisk or any other option except previously mentioned above I.e Install magisk or magisk app.
Have checked & found OEM unlocking and USB debugging is still open.
Now I am lost and wondering where could I be going wrong.
Appreciate very much if someone can guide me in right direction in getting Gydisk option si that I can pass the safety check and hide magisk.
Click to expand...
Click to collapse
The same thing happened to me so i tried and tried and tried for like 4-5 hours after reinstalling multiple times the firmware so i gave up and came to the conclusion that its not supported yet for a few phones like the Note8 (SM-N950F ~ my version of the phone).So the only thing you can do rn is to stick to version 23.0 then go to settings and change the channel to custom channel and paste this link "https://raw.githubusercontent.com/t...304e59f631280cc26ccc6d40a7cf04f7f37/beta.json" in there so the magisk version doesn't update itself or you update it by accident
Beast-chan said:
The same thing happened to me so i tried and tried and tried for like 4-5 hours after reinstalling multiple times the firmware so i gave up and came to the conclusion that its not supported yet for a few phones like the Note8 (SM-N950F ~ my version of the phone).So the only thing you can do rn is to stick to version 23.0 then go to settings and change the channel to custom channel and paste this link "https://raw.githubusercontent.com/t...304e59f631280cc26ccc6d40a7cf04f7f37/beta.json" in there so the magisk version doesn't update itself or you update it by accident
Click to expand...
Click to collapse
@Beast-chan
Hope you were able to install Magisk 24.1 Canary version without any further issues.
Prof_Shekhar said:
@Beast-chan
Hope you were able to install Magisk 24.1 Canary version without any further issues.
Click to expand...
Click to collapse
tbh i didnt try the Canary version...does it work or why do you ask?
Beast-chan said:
tbh i didnt try the Canary version...does it work or why do you ask?
Click to expand...
Click to collapse
@Beast-chan
Definitely. I have installed Magisk 24.1 Canary using patched AP file from stock firmware, and then reinstalled the Magisk 24.1 Canary version. It has been working without any issues since then.
Don't forget to install universal safetyNet Fix.
Let me know if you run into any issues.
Prof_Shekhar said:
@Beast-chan
Definitely. I have installed Magisk 24.1 Canary using patched AP file from stock firmware, and then reinstalled the Magisk 24.1 Canary version. It has been working without any issues since then.
Don't forget to install universal safetyNet Fix.
Let me know if you run into any issues.
Click to expand...
Click to collapse
ok ty i will try it