Hi all,
my brother-in-law has as Nord. I rooted his phone some time ago with Magisk 20.4. After this he installed several system updates with applying Magisk to the OTA slot on his own, w/o problems.
Yesterday he bricked the phone by applying the same procedure as always. The device was "in an unstable state". Fortunately, after some emails back and forth, he was able to fastboot it from the other slot.
Now he worries to install the system update again.
tl;dr
In the Magisk Manager 21.2 currently is shown.
Is there is any known problem with Magisk 21.2 and the Nord with Android 10?
Thanks
Related
I'm pretty sure i couldn't be the only one who recently updated from 16.0 to 17.0 (Stable Channel). I first updated the magisk manager and it prompted me to flash 16.0(1600) instead of a 17.0 version. Well since i flashed the 16.0(1600) version it prompted me to download, i got into a nasty bootloop and thankfully recovered with me having the stock ROM in my storage. I'm wondering if anyone else went through the bootloop i did this morning and if people should just flash the newer zips outside of the manager
HighOnLinux said:
I'm pretty sure i couldn't be the only one who recently updated from 16.0 to 17.0 (Stable Channel). I first updated the magisk manager and it prompted me to flash 16.0(1600) instead of a 17.0 version. Well since i flashed the 16.0(1600) version it prompted me to download, i got into a nasty bootloop and thankfully recovered with me having the stock ROM in my storage. I'm wondering if anyone else went through the bootloop i did this morning and if people should just flash the newer zips outside of the manager
Click to expand...
Click to collapse
I also got a bootloop but I flashed 17.0 through twrp. I had to go through the qualcomm drivers process to unbrick it because it was hard bricked lol
Flashed uninstall magisk and than magisk 17 and all worked well.
dracoboss said:
I also got a bootloop but I flashed 17.0 through twrp. I had to go through the qualcomm drivers process to unbrick it because it was hard bricked lol
Click to expand...
Click to collapse
That's horrible to have a hard bricked device. There's a hotfix that just got released right at this moment (17.1) so i'd recommend you to download that and continue the process to try getting root access back
Got the same problems as described here. Then I downloaded the latest Magisk uninstaller and Magisk 17 from the Magisk thread. The next step was to flash the uninstaller and afterwards Magisk 17 and the device booted well.
Running 17.1 and still getting the same thing with safety net check as before
The response is invalid
HighOnLinux said:
That's horrible to have a hard bricked device. There's a hotfix that just got released right at this moment (17.1) so i'd recommend you to download that and continue the process to try getting root access back
Click to expand...
Click to collapse
Yeah that's what I did and everything is fine... For now lol. Thanks
From Magisk 17.0 to Magisk 17.1, install it automatically. SafetyNet test successful
it's better and more secure deinstall first magisk manager clearing cache and data, install magisk 17.1 from twrp and if magisk manager doesnt be installed, install the apk
Since i got my oneplus 6 i've had magisk and twrp running on it, the last few times the os has updated i get a bootloop wich i've managed to get out of in the past by running magisk remover and reinstalling magisk, although i confess to stumbling my way through that and do not seem to be able to reproduce the effect this time, i'm currently running oxyOS 9.0.7, no magisk and twrp blu spark, any help would be greatly appreciated in getting magisk back on my phone without bootlooping again.
the current version i should be running is 19.3
paul0909 said:
Since i got my oneplus 6 i've had magisk and twrp running on it, the last few times the os has updated i get a bootloop wich i've managed to get out of in the past by running magisk remover and reinstalling magisk, although i confess to stumbling my way through that and do not seem to be able to reproduce the effect this time, i'm currently running oxyOS 9.0.7, no magisk and twrp blu spark, any help would be greatly appreciated in getting magisk back on my phone without bootlooping again.
the current version i should be running is 19.3
Click to expand...
Click to collapse
After updating OOS you need to re-flash TWRP (stock recovery after OOS update), then Magisk.
What Magisk modules are you using? Most likely the issue if you did what I mentioned above (unclear from your post.
Not many modules, vanced youtube, a call recorder, i honestly can't remember the others, when i get this fixed I'll tidy it up.
To be honest I only wanted magisk for YouTube vanced and installed it before I knew there was a non root option.
PS, I did flash TWRP then magisk, it's been working since I got the phone the week they came out, but the last 2 or 3 software updates have not been smooth like they used to and I get a bootloop
Dears,
I have a OnePlus 6 unlocked and rooted with magisk and TRWP.
Currently I'm running stock firmware: oxygenos 10.3.
I got a message from system to update to 10.3.1.
Last time (when I have to update to 10.3) I tried to update in every way but without success and at the end I had to format everything and I lost my data.
So here is my question: which is the correct procedure to update software?
Thanks!
Look in TWRP and Root for OnePlus 6 on Oxygen OS 10 Stable/Beta thread
So you need to download latest Oxygen zip which is 042 buil if I'm not wrong...put it on your phone if you already didn't done that...then reboot to TWRP...and here starts the procedure....I HIGHLY RECCOMEND TO DO A WIPE WITHOUT FORMATTING INTERNAL STORAGE ONLY DATA...FOR AVOIDING ISSUES...but you can go without it...so here we start
Boot into twrp
Flash oxygen os zip(latest)
Flash twrp
Reboot to twrp(if it says no os installed just ignore it and swipe reboot anyway)
Flash magisk
and your done...thats it...nothing could go wrong.... I'm always doing it this way....
ilpratti said:
Dears,
I have a OnePlus 6 unlocked and rooted with magisk and TRWP.
Currently I'm running stock firmware: oxygenos 10.3.
I got a message from system to update to 10.3.1.
Last time (when I have to update to 10.3) I tried to update in every way but without success and at the end I had to format everything and I lost my data.
So here is my question: which is the correct procedure to update software?
Thanks!
Click to expand...
Click to collapse
For me, the phone downloaded the whole package instead of just the little OTA. I let it install it, bit did not let it restart it. Then I went to magisk modules and installed "twrp-keep". Then in magisk manager I had it install magisk on the other slot. Then I restarted the phone. Everything worked great.
tabletalker7 said:
For me, the phone downloaded the whole package instead of just the little OTA. I let it install it, bit did not let it restart it. Then I went to magisk modules and installed "twrp-keep". Then in magisk manager I had it install magisk on the other slot. Then I restarted the phone. Everything worked great.
Click to expand...
Click to collapse
Try this method... im also done my update like this!
my way of doing it
Here's what i did and it didn't took me long at all i'm a newbie
I unroot my phone via magisk
install os 10.3.1 then flash twrp and root my phone again.
Dears,
Thanks for the replay.
I forgot that I was without TWRP.
What I did, and it worked, is:
- uninstall magisk manager by magisk
- install full update
- reboot
- flash by fastboot boot.img patched by magisk.
Thanks again
PLEASE HELP
im rooted using magisk and twrp with oneplus 7 pro global.
today tried to update ota from 10.3.2 to 10.3.3 without losing my root.
someone on facebook told me to do this:
first, download and intstall the OTA normally from the update center on the settings app.
then, before reboot go ahead to magisk and install it on another slot(after ota)
the magisk did its job.. flashed something and the asked me to reboot, so i did.
no im stuck on the oneplus animation logo.
anyone help?
Did you disable all your magisk modules before the whole procedure?
Hi people. I have been rooted since day one on September 2020. I NEVER had a single issue with root and OTAs.
Since the last update, everytime I reboot, I loose root. The Magisk app (beta) stays but the root is gone.
What I have to do, since my bootloader is unlocked since day one is: I extract the boot.img file with payload dumper, patch it with magisk, reboot in fastboot and push it with ADB.
Any permanent solution?
I still have no issues although running 11.1.9.9 as well. I use Magisk 24.1 and whenever I got an OTA installed I flash magisk on the inactive partition and boot to it, I never lose root
Actually the only thing I can imagine is that your phone boots to the opposite partition. you could try to flash magisk to the inactive slot, but no warranty this will fix your issue
TheSSJ said:
I still have no issues although running 11.1.9.9 as well. I use Magisk 24.1 and whenever I got an OTA installed I flash magisk on the inactive partition and boot to it, I never lose root
Actually the only thing I can imagine is that your phone boots to the opposite partition. you could try to flash magisk to the inactive slot, but no warranty this will fix your issue
Click to expand...
Click to collapse
I don't know why but after switching to the beta Magisk channel the problem seems to be fixed. Weird.
exnokiafan said:
Hi people. I have been rooted since day one on September 2020. I NEVER had a single issue with root and OTAs.
Since the last update, everytime I reboot, I loose root. The Magisk app (beta) stays but the root is gone.
What I have to do, since my bootloader is unlocked since day one is: I extract the boot.img file with payload dumper, patch it with magisk, reboot in fastboot and push it with ADB.
Any permanent solution?
Click to expand...
Click to collapse
Can you share boot .img , I also want to root my phone.