Related
Hi!
I have a OP6. Running rooted stock with BluSpark TWRP and Magisk. Some months ago I rooted it and I was running 9.0.1 or 9.0.0, not sure which one. I then updated to 9.0.2 OTA a week or so later. I can not remember the exact procedure, but everything worked fine. Today I installed 9.0.3 OTA and then used Magisk (18.0) before reboot to install it to slot A (9.0.2 was on B). Somehow, I ended up with a wiped device and stock recovery. Can anyone help me to find my potential fault in this? I don't want it wiped during the next OTA, it's a real hassle to set up everything again. I remember that I checked a guide that had tips on OTA, but I can't seem to find it.
Best.
yogra1921 said:
Hi!
I have a OP6. Running rooted stock with BluSpark TWRP and Magisk. Some months ago I rooted it and I was running 9.0.1 or 9.0.0, not sure which one. I then updated to 9.0.2 OTA a week or so later. I can not remember the exact procedure, but everything worked fine. Today I installed 9.0.3 OTA and then used Magisk (18.0) before reboot to install it to slot A (9.0.2 was on B). Somehow, I ended up with a wiped device and stock recovery. Can anyone help me to find my potential fault in this? I don't want it wiped during the next OTA, it's a real hassle to set up everything again. I remember that I checked a guide that had tips on OTA, but I can't seem to find it.
Best.
Click to expand...
Click to collapse
I had the same thing happen to me. I missed the part where I flash TWRP right after the OTA. That probably triggered the factory reset
So instead of rebooting, I should do a "fastboot boot IMAGE" and then install the bluspark twrp zip from inside that one? I guess I can boot up to TWRP and install Magisk as well after this while I'm at it?
Are you flashing from twrp?
If so,flash ROM zip
Flash twrp zip
Reboot to twrp
Flash magisk
Done.
If ur doing it from Android
Install ROM,when it asks you to reboot, DON'T
go to magisk app
Go to modules
Search for a/b twrp (you should only find one module)
Install it ,don't reboot
Go to main magisk screen
Press install,install, install to inactive slot (after OTA) after it's done you can REBOOT.
The module keeps your twrp
Flashing magisk to inactive slot will root the update you just installed
I was installing the OTA normally, without TWRP. It worked just fine last time.
You shouldn't install any OTA if you are rooted.
Only full roms.
yogra1921 said:
I was installing the OTA normally, without TWRP. It worked just fine last time.
Click to expand...
Click to collapse
Sent from my ONEPLUS A6003 using Tapatalk
I understand. But it doesn't change the fact that it worked like a charm last time. I just assumed there might be a general way.
RASTAVIPER said:
You shouldn't install any OTA if you are rooted.
Only full roms.
Sent from my ONEPLUS A6003 using Tapatalk
Click to expand...
Click to collapse
On OOS it knows if you are rooted and will download full ROM,so it's fine if you install a/b twrp magisk module after (keeps twrp) and then install magisk to inactive slot .
What happened here is he probably forgot to install twrp and magisk probably got to the wrong slot, hence the wipe
Not only probably. I did not install TWRP after the OTA. And I probably got the Magisk slot right (I installed it to other slot though the manager). Thanks for your help!
So next time:
OTA
Check if all dev USB-settings are enabled (?)
Shut off
Boot to TWRP
Install TWRP
Install Magisk to new slot
Boot up
Seems right?
yogra1921 said:
Not only probably. I did not install TWRP after the OTA. And I probably got the Magisk slot right (I installed it to other slot though the manager). Thanks for your help!
So next time:
OTA
Check if all dev USB-settings are enabled (?)
Shut off
Boot to TWRP
Install TWRP
Install Magisk to new slot
Boot up
Seems right?
Click to expand...
Click to collapse
no.... you do what i wrote like 3 posts up.. DO NOT REBOOT!!
After every single rom flash, TWRP, from android or fastboot or whatever way you install any rom TWRP will be replaced, aswell as boot.img (magisk is there)
OTA
DONT REBOOOOOOTT!!!
go to magisk, search for A/B twrp module, install it
DONT REBOOT
Go to main screen of magisk
install, install, install to inactive slot.
done..
your way will wipe TWRP.
From twrp:
Flash rom zip
flash twrp
reboot to twrp
flash magisk
done
Oh yeah. I completely forgot about that the TWRP retention script exists. Perfect. This is exactly what I did last time. Thanks!
Since i got my oneplus 6 i've had magisk and twrp running on it, the last few times the os has updated i get a bootloop wich i've managed to get out of in the past by running magisk remover and reinstalling magisk, although i confess to stumbling my way through that and do not seem to be able to reproduce the effect this time, i'm currently running oxyOS 9.0.7, no magisk and twrp blu spark, any help would be greatly appreciated in getting magisk back on my phone without bootlooping again.
the current version i should be running is 19.3
paul0909 said:
Since i got my oneplus 6 i've had magisk and twrp running on it, the last few times the os has updated i get a bootloop wich i've managed to get out of in the past by running magisk remover and reinstalling magisk, although i confess to stumbling my way through that and do not seem to be able to reproduce the effect this time, i'm currently running oxyOS 9.0.7, no magisk and twrp blu spark, any help would be greatly appreciated in getting magisk back on my phone without bootlooping again.
the current version i should be running is 19.3
Click to expand...
Click to collapse
After updating OOS you need to re-flash TWRP (stock recovery after OOS update), then Magisk.
What Magisk modules are you using? Most likely the issue if you did what I mentioned above (unclear from your post.
Not many modules, vanced youtube, a call recorder, i honestly can't remember the others, when i get this fixed I'll tidy it up.
To be honest I only wanted magisk for YouTube vanced and installed it before I knew there was a non root option.
PS, I did flash TWRP then magisk, it's been working since I got the phone the week they came out, but the last 2 or 3 software updates have not been smooth like they used to and I get a bootloop
Dears,
I have a OnePlus 6 unlocked and rooted with magisk and TRWP.
Currently I'm running stock firmware: oxygenos 10.3.
I got a message from system to update to 10.3.1.
Last time (when I have to update to 10.3) I tried to update in every way but without success and at the end I had to format everything and I lost my data.
So here is my question: which is the correct procedure to update software?
Thanks!
Look in TWRP and Root for OnePlus 6 on Oxygen OS 10 Stable/Beta thread
So you need to download latest Oxygen zip which is 042 buil if I'm not wrong...put it on your phone if you already didn't done that...then reboot to TWRP...and here starts the procedure....I HIGHLY RECCOMEND TO DO A WIPE WITHOUT FORMATTING INTERNAL STORAGE ONLY DATA...FOR AVOIDING ISSUES...but you can go without it...so here we start
Boot into twrp
Flash oxygen os zip(latest)
Flash twrp
Reboot to twrp(if it says no os installed just ignore it and swipe reboot anyway)
Flash magisk
and your done...thats it...nothing could go wrong.... I'm always doing it this way....
ilpratti said:
Dears,
I have a OnePlus 6 unlocked and rooted with magisk and TRWP.
Currently I'm running stock firmware: oxygenos 10.3.
I got a message from system to update to 10.3.1.
Last time (when I have to update to 10.3) I tried to update in every way but without success and at the end I had to format everything and I lost my data.
So here is my question: which is the correct procedure to update software?
Thanks!
Click to expand...
Click to collapse
For me, the phone downloaded the whole package instead of just the little OTA. I let it install it, bit did not let it restart it. Then I went to magisk modules and installed "twrp-keep". Then in magisk manager I had it install magisk on the other slot. Then I restarted the phone. Everything worked great.
tabletalker7 said:
For me, the phone downloaded the whole package instead of just the little OTA. I let it install it, bit did not let it restart it. Then I went to magisk modules and installed "twrp-keep". Then in magisk manager I had it install magisk on the other slot. Then I restarted the phone. Everything worked great.
Click to expand...
Click to collapse
Try this method... im also done my update like this!
my way of doing it
Here's what i did and it didn't took me long at all i'm a newbie
I unroot my phone via magisk
install os 10.3.1 then flash twrp and root my phone again.
Dears,
Thanks for the replay.
I forgot that I was without TWRP.
What I did, and it worked, is:
- uninstall magisk manager by magisk
- install full update
- reboot
- flash by fastboot boot.img patched by magisk.
Thanks again
So, when I updated from OOS 9 to 10 I forgot to remove magisk and it's modules and completely forgot about it.
When I finished the update I noticed all the emojis where gone and from other posts here I found that it was because of a problem with the reserve partition that could be solved flashing a magisk module. Well, to my surprise, when I tried flashing magisk again on OOS 10 I always got stuck on a bootloop, I tried everything, removing the old modules that where still installed, using different twrp versions, using bluspark kernel, flashing a patched img through adb... But I always got a bootlop after installing magisk.
Since I couldn't get magisk on and was getting frustrated I decided to wait for the next OTA to see if it might fix it, but now that I tried installing it, I get stuck at 89% installation and don't know what to do. It's probably because of the reserve partition where the emoji should be, but since I can't use magisk idk how to fix it.
Is there another way to fix the reserve partition? Maybe a patch through twrp? Will a clean install of some sort help me or will it also get stuck at installation and brick my device?
Any help is welcome!
EDIT: Since noone replied I tried to fix it myself by trying to flash magisk a couple of times again (which gave me bootlops as expected), so I ended up flashing an OOS 5.1 downgrade build (which factory resets your phone so back up your stuff) and updating all the way to 10.3.1 through OTA updates. This fixed both my emoji and stuck update problem, so If you have similar problems and have not had any luck with other solutions I suggest you to downgrade like I did. If you back everything up on the cloud you should be back up and running in under an hour.
How did you flash the downgrade rom since your system updater is stuck?
Go twrp recovery, look for .Ota, flash the downloaded update zip and reboot.(Must be patient for step 2 to complete)
If can't find .Ota, go to File manager app, click storage below, click 3 dot on top right coner, settings, turn Show hidden file switch on
Hello guys, I have this problem since upgrading to the latest OOS 10.3.2. If I flash Magisk 20.3, device boots without detecting a SIM, so no signal at all. And phone app crashing.
I'm using the latest TWRP (twrp-3.3.1-18-enchilada-Q-mauronofrio).
Anyone experience the same? How to get this to work? I need my Google PAY back
-=zipp=- said:
Hello guys, I have this problem since upgrading to the latest OOS 10.3.2. If I flash Magisk 20.3, device boots without detecting a SIM, so no signal at all. And phone app crashing.
I'm using the latest TWRP (twrp-3.3.1-18-enchilada-Q-mauronofrio).
Anyone experience the same? How to get this to work? I need my Google PAY back
Click to expand...
Click to collapse
bro check ur imei number wheather it is showing or not dial *#06#
Same thing happenned to me. I removed magisk and all modules completely then used local upgrade and reflashed 10.3.2 OTA and flashed twrp img with fastboot. When it booted into twrp recovery I flashed the twrp installer, rebooted to back to recovery and flashed magisk from twrp and rebooted system. Everything was right with the world then. The key was re moving magisk first.
Sent from my ONEPLUS A6013 using Tapatalk
cjcool_123: IMEI is showing correctly because I reflashed ROM back to get networking ability
Hondo71: I'll try that, thanks
Hondo71: I tried that, but unfortunately with the same result.
I re-flashed stock rom to get functionality back, uninstalled magisk app, flashed twrp, rebooted. flashed magisk, booted and nothing :-/
IMEI is not showing when in this state
Might want to stay where you're at until more reports come in with the all clear or maybe there's an issue with the TWRP or the rom itself
I'd try one more time. Make sure magisk and all the modules are uninstalled. Download & Reinstall 10.3.2 full OTA through local upgrade. Then install magisk mamager. Boot to fastboot and boot TWRP recovery img. Then in recovery flash the twrp installer zip, reboot to recovery and install Latest magisk zip. Reboot system. Data and cellular should work. I lost it on both my 6 & 6T but got it back doing it this way on both.
-=zipp=- said:
Hondo71: I tried that, but unfortunately with the same result.
I re-flashed stock rom to get functionality back, uninstalled magisk app, flashed twrp, rebooted. flashed magisk, booted and nothing :-/
IMEI is not showing when in this state
Click to expand...
Click to collapse
Uninstall magisk and modules then reflash 10.3.2 from local upgrade download twrp installer and Magisk zip to internal memory, install magisk manager. reboot to bootloader, then fastboot boot TWRP, in recovery flash twrp installer, reboot recovery and flash Magisk. Reboot system. Just verified it working again on my OP6.
Sent from my ONEPLUS A6013 using Tapatalk
Hondo71: you were right, it is working now. I don't think I needed to do all the procedures you suggested, I figured out there was one module that was causing this - Native OOS call recorder :-/ I feel stupid I haven't thought about this before.
Anyway, all working now. Now I only need to find out new way how to record my calls
-=zipp=- said:
Hondo71: you were right, it is working now. I don't think I needed to do all the procedures you suggested, I figured out there was one module that was causing this - Native OOS call recorder :-/ I feel stupid I haven't thought about this before.
Anyway, all working now. Now I only need to find out new way how to record my calls
Click to expand...
Click to collapse
I reinstalled oos call recorder and it works fine.
Sent from my ONEPLUS A6013 using Tapatalk
How do I root stock os 10.3.2? Which version of TWRP and Magisk I have to use? Please advise. Thanks in advance.
I also lost the function for telephone.
Mobile network ist working, i can recieve calls, but im not able to do calls.
i tried everything...flashes a few times the latest beta...flashed Magisk new...delteted it...i dont know what else can be possible?
yess same problem after got new update > flash twrp > install magisk > NO SIGNAL That because of OOS native call recording delete and reinstall it >DONE Working great.