Hi, my Galaxy S2 was working great with kitkat that I flashed and then thought why not try a new LiniageOS. That Rom failed to install and I figured I would try an updated TWRP recovery. I tried the newest version and it failed to install. It warned me I had no rom installed on reboot but I rebooted anyway and went back to recovery. No issues until I tried an earlier version of TWRP that failed during install as well and now is in boot loop with no Rom. Can not enter recovery mode either. Can enter download mode but Odin and my computer do not seem to detect my phone when plugged in via usb. Tried 3 usb cables but only one computer available. Samsung usb drivers installed.
Any ideas what to do next.
Thanks!
I have a Galaxy S2 with a custom rom, after a year the s2 won't boot. Only I see encryption ... I have tried different stock roms and odin versions and got not succes. I have read about Nand rw corruption. Is it possible and how House Cleaning Services Dubai
Welcome to XDA!
Try to post in desired device section so your chances to get help are bigger, also please read forum rules.
Enjoy!
Related
So I've just installed CM 11 (CyanogenMod) on my Samsung Galaxy Tab 2 10.1 (GT-P5113). I was running CM 10.2 and it notified me that there was an update available. And it was CM 11. So I installed it and went to CWM recovery and installed it. But, the installment failed, it said "Status 7". So I just rebooted the tablet, and decided to just not update it. But that's where the problem begins. The "Samsung Galaxy Tab 2 10.1" logo shows up and that's where my heart stopped beating :crying:. It did not show the CyanogenMod logo after that. Instead, it rebooted BACK into CWM. Once again, I rebooted the device. and same thing happened. And don't say "Well, plug your SD card into your computer and install the previous ROM you had on it." Cause I can't. My tablet supports SD Cards, but the SD Card won't stay in. And don't say "Plug in your tablet to your computer, and use Odin to reinstall the other ROM you had" Cause my computer for ,some stupid reason, doesn't recognize it. And if possible, can someone tell me how to turn it off? Cause if I try to turn it off, it just turns back on, and it's overheating.
Deleted...
Reply
bbugger said:
Have you tried by wiping the cache partition and dalvik cache from CWM ?
--> "Status 7" explains that your current CWM version is incompatible. Check your current version and you need at least CWM 6.0.4.4 version to install the CM11(Kitkat)
http://forum.xda-developers.com/showthread.php?t=2548476
Click to expand...
Click to collapse
Yes, I even factory reset it.
I finally fixed it on July 10, 2021. Here is what I did:
Downloaded the official firmware of Samsung Galaxy Tab 2 P5100.
I go to Bootloader (Odin Mode) and installed the firmware through Odin in my Computer.
Go to Recovery Mode (not TWRP cause I installed the official firmware) and cleared data & cache.
Powered the Tablet on and waited for 10 mins for its booting.
After its done, I downloaded KingRoot to root the tablet.
Rooted and I go to Odin mode again to install TWRP Recovery.
Go to Recovery Mode and installed the right Custom ROM for my tablet.
Opened and successfully its working af. Audio, Video, all are working.
PROBLEM: INSTALLED THE WRONG CUSTOM ROM ON MY DEVICE (espressowifi) MUST HAVE INSTALLED (espresso3g).
This problem lasted for 3 days xD. this is the solution
SoIomon said:
I finally fixed it on July 10, 2021. Here is what I did:
Downloaded the official firmware of Samsung Galaxy Tab 2 P5100.
I go to Bootloader (Odin Mode) and installed the firmware through Odin in my Computer.
Go to Recovery Mode (not TWRP cause I installed the official firmware) and cleared data & cache.
Powered the Tablet on and waited for 10 mins for its booting.
After its done, I downloaded KingRoot to root the tablet.
Rooted and I go to Odin mode again to install TWRP Recovery.
Go to Recovery Mode and installed the right Custom ROM for my tablet.
Opened and successfully its working af. Audio, Video, all are working.
PROBLEM: INSTALLED THE WRONG CUSTOM ROM ON MY DEVICE (espressowifi) MUST HAVE INSTALLED (espresso3g).
This problem lasted for 3 days xD. this is the solution
Click to expand...
Click to collapse
Really are you spamming all over the forum with same post...
You don't need to install kingroot!!
Skip this on prehistoric tab, not needed, no protection aka bootloader unlock etc.
Simply install TWRP from odin and your done. Next you can install magisk, really simple.
That's it.
I just posted in this forum...
I got bored of my now aging Samsung Galaxy tab 2 10.1 and decided to try and flash it to CM 10.1 . in hopes of a speed boost. I had never flashed before But these are the steeps i followed.
First i rooted device through Kingo Root aplication, No problems there.
Then i got Odin Mobile from the app store . I put these 3 files on my device .
E4GT-EL29-directbootCWM-v3.tar.md5
CM 10.1 ROM 4.2.2 JB
CM 10.1 Gapps zip
taken from here **cant post link as i am a new member**
Then in ODIN Mobile in the section that says kernal i loaded the first file and clicked flash firmware. But instead of rebooting into clock work recovery (which is what i think was meant to happen??) the tablet rebooted and then stalled on the Samsung logo, where it remained, even if i reboot . Samsung comes up on screen and it stays there.
i can reboot into what i think is recovery mode where i have some options i tried selecting "wipe data/factory reset" but the problem still persisted .
I have no idea how to proceed from here. Can someone please help me recover my tablet to its original state.
Thanks
ronanbrowne88 said:
I got bored of my now aging Samsung Galaxy tab 2 10.1 and decided to try and flash it to CM 10.1 . in hopes of a speed boost. I had never flashed before But these are the steeps i followed.
First i rooted device through Kingo Root aplication, No problems there.
Then i got Odin Mobile from the app store . I put these 3 files on my device .
E4GT-EL29-directbootCWM-v3.tar.md5
CM 10.1 ROM 4.2.2 JB
CM 10.1 Gapps zip
taken from here **cant post link as i am a new member**
Then in ODIN Mobile in the section that says kernal i loaded the first file and clicked flash firmware. But instead of rebooting into clock work recovery (which is what i think was meant to happen??) the tablet rebooted and then stalled on the Samsung logo, where it remained, even if i reboot . Samsung comes up on screen and it stays there.
i can reboot into what i think is recovery mode where i have some options i tried selecting "wipe data/factory reset" but the problem still persisted .
I have no idea how to proceed from here. Can someone please help me recover my tablet to its original state.
Thanks
Click to expand...
Click to collapse
U just need to boot into recovery and flash cm10 and gapps from there after wiping system, data, dalvic cache and cache. These r the steps for CWM.
E4GT -EL29 CWM doesn't sound like a file that is for this tablet, it has to do with a Samsung phone.
Recheck your info and if possible post where you got this file from.
If you flashed the wrong file your tablet could be toast.
Pp.
HAYLP! I've got a rooted my Note 10.1 2014 edition and had loads of different Roms installed with no issues at all. Last night (whilst slightly worse for wear from excessive Vodka it has to be said) I tried to another custom ROM from XDA. http://forum.xda-developers.com/gal...opment/rom-note-s-10-1-2014-rom-beta-t2859040
I'm not sure what happened, it appeared to install fine after a full wipe, device rebooted then was stuck on the Samsung logo for ages (I know ROMS take a long time on 1st boot but I'm talking 3hrs+ looking at the Samsung logo boot screen.)
So I figured I'd power off and just manually flash another ROM but I can't get either USB OTG to work after flashing TWRP via ODIN (tried 2.84 thru 2.87) the option just isn't there to mount USB storage - tried 2 different sticks in FAT32 and ExFAT, nada.
Tried ADB but get a device not found from either download mode or ADB sideload in TWRP.
As the device shows up in ODIN, I figured I'd flash a ROM via that but I can't seem to find any ODIN flashable roms for the SM-P600. It was running Temasek's CM 12.1 5.1.1 rom with the 5.1.1 Bootloader.
I've tried reflashing the Stock Firmware and also as a last ditch effort, using the Stock PIT file to repoartition but it's still just sitting on the Samsung Logo forever.
Is there a separate CSC / Bootloader that I'm missing or something? (Or is it possible to just reflash Temesek or another Rom in Odin somehow?)
Anyone got any ideas please?
mpthreeuk said:
HAYLP! I've got a rooted my Note 10.1 2014 edition and had loads of different Roms installed with no issues at all. Last night (whilst slightly worse for wear from excessive Vodka it has to be said) I tried to another custom ROM from XDA. http://forum.xda-developers.com/gal...opment/rom-note-s-10-1-2014-rom-beta-t2859040
I'm not sure what happened, it appeared to install fine after a full wipe, device rebooted then was stuck on the Samsung logo for ages (I know ROMS take a long time on 1st boot but I'm talking 3hrs+ looking at the Samsung logo boot screen.)
So I figured I'd power off and just manually flash another ROM but I can't get either USB OTG to work after flashing TWRP via ODIN (tried 2.84 thru 2.87) the option just isn't there to mount USB storage - tried 2 different sticks in FAT32 and ExFAT, nada.
Tried ADB but get a device not found from either download mode or ADB sideload in TWRP.
As the device shows up in ODIN, I figured I'd flash a ROM via that but I can't seem to find any ODIN flashable roms for the SM-P600. It was running Temasek's CM 12.1 5.1.1 rom with the 5.1.1 Bootloader.
I've tried reflashing the Stock Firmware and also as a last ditch effort, using the Stock PIT file to repoartition but it's still just sitting on the Samsung Logo forever.
Is there a separate CSC / Bootloader that I'm missing or something? (Or is it possible to just reflash Temesek or another Rom in Odin somehow?)
Anyone got any ideas please?
Click to expand...
Click to collapse
Hi,
Try posting your question here:
http://forum.xda-developers.com/galaxy-note-10-2014/help
The experts there may be able to help.
Good luck!
Ok. I have a Samsung S4 mini. Yesterday I installed CM13. Dumb thing to do.
It was an automatic update from CMUpdater, so not through the Recovery menu.
For my surprise, I noticed that this update also updated the ClockWorkMod Recovery to the latest version available.
The CM13 installation went well actually .The phone booted fine. Then of course I needed the new Gapps installed. I downloaded the correct Gapps. Boot into CWM recovery. Choose the Gapps ZIP file. And... Error! I went back to phone to enable root acess (ADB & Apps), and enabled USB debugging also. And...Error! No way to install Gapps with CWM recovery.
After some search I realize that the new Gapps for CM13 is somehow not compatible with the CWM recovery that was instaled. So I downloaded ROM MANAGER to change the recovery to TWRP, which everybody said would perfectly flash the Gapps smoothly. Nothing happened. No TWPR. Only CWM still on. Then I downloaded Flashify and went back and forth on installing and unistalling TWPR and CWM. On and On.
Conclusion: somewhere along the process not only I couldn´t install TWRP recovery, but also have wrecked the CWM recovery. Now, no matter what I do, I cannot enter recovery mode at all, hence i cannot neither install Gapps or Reinstall another ROM to "start from scratch"....
I can boot the phone normally.
I can boot into donwload mode normally.
I tried installing TWRP .tar with ODIN3 but it keeps saying "cant open USB port", so it fails.
I have also installed KIES. It sucessfully install drivers, but fails to connect with my device.
Is there anyway to install a Recovery or a fresh new ROM without having to boot recovery?!
Some help? Please.
Hello,
Welcome to XDA.
Do you have USB debugging enabled in system settings to allow flashing via Odin? You may not even need to use Odin.
Try posting your question in the forum linked below.
http://forum.xda-developers.com/galaxy-s4-mini/help
The experts there may be able to help.
Register an XDA account to post and reply in the forums. Good luck.
I got S3 mini (i8200) installed deodexed PreRooted Rom without formating as it's the same version (4.2) opened
SuperSu asked for binary update I choosed the normal way at first but it failed so I choosed cwm/twrp method the device booted to recovery successfully but only to recovery so i formated system&data partitions reinstalled the rom but still boot only to recovery next i opened odin to reinstall the stock firmware but odin failed to setup connection with different caples and different laptops but then i noticed it's (i8200n) firmware not (i8200) the one i have
Now prob is the device isn't booting to any thing just a black screen no light no vib no recovery no download mode no thing :crying:
Please help fast thanks ....