So I've just installed CM 11 (CyanogenMod) on my Samsung Galaxy Tab 2 10.1 (GT-P5113). I was running CM 10.2 and it notified me that there was an update available. And it was CM 11. So I installed it and went to CWM recovery and installed it. But, the installment failed, it said "Status 7". So I just rebooted the tablet, and decided to just not update it. But that's where the problem begins. The "Samsung Galaxy Tab 2 10.1" logo shows up and that's where my heart stopped beating :crying:. It did not show the CyanogenMod logo after that. Instead, it rebooted BACK into CWM. Once again, I rebooted the device. and same thing happened. And don't say "Well, plug your SD card into your computer and install the previous ROM you had on it." Cause I can't. My tablet supports SD Cards, but the SD Card won't stay in. And don't say "Plug in your tablet to your computer, and use Odin to reinstall the other ROM you had" Cause my computer for ,some stupid reason, doesn't recognize it. And if possible, can someone tell me how to turn it off? Cause if I try to turn it off, it just turns back on, and it's overheating.
Deleted...
Reply
bbugger said:
Have you tried by wiping the cache partition and dalvik cache from CWM ?
--> "Status 7" explains that your current CWM version is incompatible. Check your current version and you need at least CWM 6.0.4.4 version to install the CM11(Kitkat)
http://forum.xda-developers.com/showthread.php?t=2548476
Click to expand...
Click to collapse
Yes, I even factory reset it.
I finally fixed it on July 10, 2021. Here is what I did:
Downloaded the official firmware of Samsung Galaxy Tab 2 P5100.
I go to Bootloader (Odin Mode) and installed the firmware through Odin in my Computer.
Go to Recovery Mode (not TWRP cause I installed the official firmware) and cleared data & cache.
Powered the Tablet on and waited for 10 mins for its booting.
After its done, I downloaded KingRoot to root the tablet.
Rooted and I go to Odin mode again to install TWRP Recovery.
Go to Recovery Mode and installed the right Custom ROM for my tablet.
Opened and successfully its working af. Audio, Video, all are working.
PROBLEM: INSTALLED THE WRONG CUSTOM ROM ON MY DEVICE (espressowifi) MUST HAVE INSTALLED (espresso3g).
This problem lasted for 3 days xD. this is the solution
SoIomon said:
I finally fixed it on July 10, 2021. Here is what I did:
Downloaded the official firmware of Samsung Galaxy Tab 2 P5100.
I go to Bootloader (Odin Mode) and installed the firmware through Odin in my Computer.
Go to Recovery Mode (not TWRP cause I installed the official firmware) and cleared data & cache.
Powered the Tablet on and waited for 10 mins for its booting.
After its done, I downloaded KingRoot to root the tablet.
Rooted and I go to Odin mode again to install TWRP Recovery.
Go to Recovery Mode and installed the right Custom ROM for my tablet.
Opened and successfully its working af. Audio, Video, all are working.
PROBLEM: INSTALLED THE WRONG CUSTOM ROM ON MY DEVICE (espressowifi) MUST HAVE INSTALLED (espresso3g).
This problem lasted for 3 days xD. this is the solution
Click to expand...
Click to collapse
Really are you spamming all over the forum with same post...
You don't need to install kingroot!!
Skip this on prehistoric tab, not needed, no protection aka bootloader unlock etc.
Simply install TWRP from odin and your done. Next you can install magisk, really simple.
That's it.
I just posted in this forum...
Related
Okay this is a weird one, Note 10.1 runs out of battery a few nights ago, go to plug it in for charging and it hangs on the "samsung galaxy note 10.1 screen". I had been running Cyanogen 11 for a few months just fine and before that Omni (Both 4.4.2) no dramas with CWM recovery 6.0.3.6. I can still get to Download/ODIN mode and CWM.
Now here is the fun part(s)
1. Firstly I tried reflashing the roms from CWM, after all I flashed both of them from the same recovery and they were still on the external sdcard. Both gave set metadata recursive status 7 error messages.
1.NB Whenever I selected the internal storage to search for a zip CWM would close immediately (crash?) and go back to the galaxy note 10.1 screen and hang there still. Also does this on other options, so I can't reach the backup I made on the internal storage
2. After googling that it seems that 6.0.3.6 can't flash 4.4.2 roms so I flash a later version using ODIN, it says success on the PC side, yet nothing changes in tablet, same when trying with twrp. CWM 6.0.3.6 won't budge
3. Try flashing the official rom (N8010XXUCMK2_N8010XSACNA2_HOME) from sammobile using ODIN, same problems as before, download mode shows the bar filling up so does ODIN, says it passed, still nothing.
4. Try old 10.2 Cyanogen build, no error message but still hangs on samsung galaxy note screen
5. Try repartitioning whilst flashing, various .pit also used, no dice. However I can now mount /data from cwm still can't mount /efs
6. Read about eMMC bug possibly being induced by Cyanogenmod, open up tablet to to check numbers on eMMC module, doesn't match any of the affected numbers.
7. Try above steps multiple times, including flashing each right after each other.
8. Cry
9. Look at new tablet options (Damn no good ones with softkeys)
10. Back to desperate flashing ODINing and scrolling through CWM
So any ideas?
Don't you have any other backup, from a sammy rom, that should restore your efs,
Two days ago happened to me the same thing.
What I've done was
1. Flash the Pit file from the leaked 4.4.2
2. Restore a backup from a 4.1.2 Sammy rom
3. Full wipe in recovery. Efs error was gone
4. Restore the backup again and boot up.
5. Update the recovery
6. Wipe again
7. Flashed the Gnabo Rom V5
Now everything it's working pretty damn good.
Hope you can solve the issue.
jika23 said:
Don't you have any other backup, from a sammy rom, that should restore your efs,
Two days ago happened to me the same thing.
What I've done was
1. Flash the Pit file from the leaked 4.4.2
2. Restore a backup from a 4.1.2 Sammy rom
3. Full wipe in recovery. Efs error was gone
4. Restore the backup again and boot up.
5. Update the recovery
6. Wipe again
7. Flashed the Gnabo Rom V5
Now everything it's working pretty damn good.
Hope you can solve the issue.
Click to expand...
Click to collapse
Where exactly is the PIT file I should be looking for? Been looking for a while now.
I got bored of my now aging Samsung Galaxy tab 2 10.1 and decided to try and flash it to CM 10.1 . in hopes of a speed boost. I had never flashed before But these are the steeps i followed.
First i rooted device through Kingo Root aplication, No problems there.
Then i got Odin Mobile from the app store . I put these 3 files on my device .
E4GT-EL29-directbootCWM-v3.tar.md5
CM 10.1 ROM 4.2.2 JB
CM 10.1 Gapps zip
taken from here **cant post link as i am a new member**
Then in ODIN Mobile in the section that says kernal i loaded the first file and clicked flash firmware. But instead of rebooting into clock work recovery (which is what i think was meant to happen??) the tablet rebooted and then stalled on the Samsung logo, where it remained, even if i reboot . Samsung comes up on screen and it stays there.
i can reboot into what i think is recovery mode where i have some options i tried selecting "wipe data/factory reset" but the problem still persisted .
I have no idea how to proceed from here. Can someone please help me recover my tablet to its original state.
Thanks
ronanbrowne88 said:
I got bored of my now aging Samsung Galaxy tab 2 10.1 and decided to try and flash it to CM 10.1 . in hopes of a speed boost. I had never flashed before But these are the steeps i followed.
First i rooted device through Kingo Root aplication, No problems there.
Then i got Odin Mobile from the app store . I put these 3 files on my device .
E4GT-EL29-directbootCWM-v3.tar.md5
CM 10.1 ROM 4.2.2 JB
CM 10.1 Gapps zip
taken from here **cant post link as i am a new member**
Then in ODIN Mobile in the section that says kernal i loaded the first file and clicked flash firmware. But instead of rebooting into clock work recovery (which is what i think was meant to happen??) the tablet rebooted and then stalled on the Samsung logo, where it remained, even if i reboot . Samsung comes up on screen and it stays there.
i can reboot into what i think is recovery mode where i have some options i tried selecting "wipe data/factory reset" but the problem still persisted .
I have no idea how to proceed from here. Can someone please help me recover my tablet to its original state.
Thanks
Click to expand...
Click to collapse
U just need to boot into recovery and flash cm10 and gapps from there after wiping system, data, dalvic cache and cache. These r the steps for CWM.
E4GT -EL29 CWM doesn't sound like a file that is for this tablet, it has to do with a Samsung phone.
Recheck your info and if possible post where you got this file from.
If you flashed the wrong file your tablet could be toast.
Pp.
Hello everyone, I need help with my Galaxy Tab p5100.
Few days ago, I switched from CM 10.3, to SlimKat. To do so, I had to install the CWM 6.0.4.5. I did this through recovery mode (I had an earlier version and flashed the new version through the older one) and it worked just fine.
I unlocked the root feature, installed some apps, including the Xposed Module, Greenify and BootManager.
Everything was working just fine til yesterday. Before sleeping, I turned off the tab.
Today, and all of a sudden, as soon as I turned the tab on, it keept on rebooting every two minutes for no apparent reason. It just starts, boots into Slimkat, then it reboots.
At first I thought it might be a malfunctioning app, so I booted into safe mode, it stayed a little longer than 2 mins without a reboot, then it rebooted again. Tried that more than once.
I did a factory reset, wiped cache, cleared Dalvik and formatted system from the mount and storage section. Still the problem was there, and surprisingly all my apps and personal data was still there!!
Tried the back up and reset option from the ROM itself, while on safe mode, and still nothing happened.
I tried to flash CM 10.3 back via the CWM, it tells me that it succeeded, then I reboot and SlimKat is still there!
I tried to install the TWRP via Odin, and the Odin said PASS. Then when I rebooted into recovery I found that CWM 6.0.4.5 still there!!
I tried to flash the TWRP via the existing CWM, and again it says operation is successful but when I reboot into recovery I find that CWM is still taking over.
I even tried to flash the official JB 4.2.2 ROM via Odin, and it FAILED. (the P5100XXDMH1.tar file)
I feel pretty helpless and I don't know what to do. Any help would be appreciated.
Thanks in advance!
Update 1: I can delete an app or two before the tab restarts, and when I did and the tab restarted, the apps were restored!
Dear all,
I have read through most (if not all) the other "bricked" device threads, but they don't really fit my problem.
I was on TWRP (sthg) and CM 12.1 (latest) here from the forum.
Everything worked fine for ages.Yesterday I used the device to the latest miliAmpere and only later the connected the complete empty Tab to the Power and restarted it.
Next morning the device showed "Encryption failed" and something that I have to do a factory reset. There was a "reset"-button, but I didn't used it and shutted down the Tab via the power Off function.
Since then the device is not reacting. Currently it is bootlooping into TWRP (!). I cannot switch it off and it actually gets rather hot. The only way to stop this "cycle of death" is to go to download mode...
I already tried to change the recovery to CWM and also to TWRP again via ODIN. ODIN worked fine, but I still cannot start the recovery. TWRP makes a boot loop with its logo and CWM loops without showing anything.
I wonder what will be the next best steps. Odin is working fine, so I don't want to ruin that as well.
What do you think? Is the Bootloader corrupt?
Why does it always boot into recovery (I can't get into a System-Bootloop)?
Any help is really appreciated!
Best,
Jan
After I have reinstalled the original firmware from sammobile, I could boot into recovery. I then factory reseted, flashed TWRP via ODIN and switched back to CM12.1.
I lost all my data, but at least I still have my Tab
Best,
Jan
Hello everyone. I have sm-n920p with latest nougat 7.0 stock. I want install TWRP. In developers options I switch on OEM unlock and USB debugging. Download latest twrp from official site. Starp phone in download mode and connect it to Odin. When Odin says PASS I reboot phone in recovery without starting OS. Phone start, than I see blue screen with white robot and it says "installing update" after that it start stock recovery. I try different version of twrp and odin. What I done wrong?
TWRP must be on the AP slot, and as soon as the screen turns off (like 2 seconds after you click start), get into the recovery.
Hello, I know this thread is old but I'm having a similar problem except my phone was rooted over a year ago. I wanted to flash XPOSED but it only has the stock recovery, I thought that I installed TWRP when I rooted my phone. I have SuperSU installed & Root Check says my phone has root. My question is can I just flash TWRP with Odin without losing root or having to reset phone & losing all my data? I have a Note 5 with Android 7.0 Bootloader #NRD920PVPS3DRH1, SuperSU eu.chainfire.supersu 2.82-SR3