Hello everyone. I have sm-n920p with latest nougat 7.0 stock. I want install TWRP. In developers options I switch on OEM unlock and USB debugging. Download latest twrp from official site. Starp phone in download mode and connect it to Odin. When Odin says PASS I reboot phone in recovery without starting OS. Phone start, than I see blue screen with white robot and it says "installing update" after that it start stock recovery. I try different version of twrp and odin. What I done wrong?
TWRP must be on the AP slot, and as soon as the screen turns off (like 2 seconds after you click start), get into the recovery.
Hello, I know this thread is old but I'm having a similar problem except my phone was rooted over a year ago. I wanted to flash XPOSED but it only has the stock recovery, I thought that I installed TWRP when I rooted my phone. I have SuperSU installed & Root Check says my phone has root. My question is can I just flash TWRP with Odin without losing root or having to reset phone & losing all my data? I have a Note 5 with Android 7.0 Bootloader #NRD920PVPS3DRH1, SuperSU eu.chainfire.supersu 2.82-SR3
Related
So I've just installed CM 11 (CyanogenMod) on my Samsung Galaxy Tab 2 10.1 (GT-P5113). I was running CM 10.2 and it notified me that there was an update available. And it was CM 11. So I installed it and went to CWM recovery and installed it. But, the installment failed, it said "Status 7". So I just rebooted the tablet, and decided to just not update it. But that's where the problem begins. The "Samsung Galaxy Tab 2 10.1" logo shows up and that's where my heart stopped beating :crying:. It did not show the CyanogenMod logo after that. Instead, it rebooted BACK into CWM. Once again, I rebooted the device. and same thing happened. And don't say "Well, plug your SD card into your computer and install the previous ROM you had on it." Cause I can't. My tablet supports SD Cards, but the SD Card won't stay in. And don't say "Plug in your tablet to your computer, and use Odin to reinstall the other ROM you had" Cause my computer for ,some stupid reason, doesn't recognize it. And if possible, can someone tell me how to turn it off? Cause if I try to turn it off, it just turns back on, and it's overheating.
Deleted...
Reply
bbugger said:
Have you tried by wiping the cache partition and dalvik cache from CWM ?
--> "Status 7" explains that your current CWM version is incompatible. Check your current version and you need at least CWM 6.0.4.4 version to install the CM11(Kitkat)
http://forum.xda-developers.com/showthread.php?t=2548476
Click to expand...
Click to collapse
Yes, I even factory reset it.
I finally fixed it on July 10, 2021. Here is what I did:
Downloaded the official firmware of Samsung Galaxy Tab 2 P5100.
I go to Bootloader (Odin Mode) and installed the firmware through Odin in my Computer.
Go to Recovery Mode (not TWRP cause I installed the official firmware) and cleared data & cache.
Powered the Tablet on and waited for 10 mins for its booting.
After its done, I downloaded KingRoot to root the tablet.
Rooted and I go to Odin mode again to install TWRP Recovery.
Go to Recovery Mode and installed the right Custom ROM for my tablet.
Opened and successfully its working af. Audio, Video, all are working.
PROBLEM: INSTALLED THE WRONG CUSTOM ROM ON MY DEVICE (espressowifi) MUST HAVE INSTALLED (espresso3g).
This problem lasted for 3 days xD. this is the solution
SoIomon said:
I finally fixed it on July 10, 2021. Here is what I did:
Downloaded the official firmware of Samsung Galaxy Tab 2 P5100.
I go to Bootloader (Odin Mode) and installed the firmware through Odin in my Computer.
Go to Recovery Mode (not TWRP cause I installed the official firmware) and cleared data & cache.
Powered the Tablet on and waited for 10 mins for its booting.
After its done, I downloaded KingRoot to root the tablet.
Rooted and I go to Odin mode again to install TWRP Recovery.
Go to Recovery Mode and installed the right Custom ROM for my tablet.
Opened and successfully its working af. Audio, Video, all are working.
PROBLEM: INSTALLED THE WRONG CUSTOM ROM ON MY DEVICE (espressowifi) MUST HAVE INSTALLED (espresso3g).
This problem lasted for 3 days xD. this is the solution
Click to expand...
Click to collapse
Really are you spamming all over the forum with same post...
You don't need to install kingroot!!
Skip this on prehistoric tab, not needed, no protection aka bootloader unlock etc.
Simply install TWRP from odin and your done. Next you can install magisk, really simple.
That's it.
I just posted in this forum...
I am having some serious troubles with upgrading my Galaxy Note 4 SM-910P (Sprint). All was well in rooting, un-rooting, etc... I have the original 4.4.4 and the new 5.0 backed up and now I can't use anything other than the firmware the original firmware package through Odin. The problem started when I installed the [ROM]ViSiON-X N4 SPR 5.0.1 [Android L 5.0][N910PVPU1BOB7-R1][03-11-15]. It installed fine but when ever I was not watching it a problem occurred such as getting locked out of ny ext SD, or just plain un-rooting itself. It finally came down to it just kicked my device into download mode and would not reboot. I did used chains Odin root method and installed TWRP, which I can still do but can not flash or restore from TWRP or CWM recovery. It will take the firmware package fine and download the 5.0 update but always gets stopped from any other upgrade at recovery be it stock or custom. I have even used Kies to try and upgrade a few time. It will upgrade from NK1 to NK2 but still will not upgrade anything else past recovery. Every time I reboot I lose my WIFI password. After every boot it takes a minute for any network to be able to reach the device. It is paused until I re enter my WiFi password then it will say that Android is done upgrading and there is a toast message that says "device is set to factory mode some items won't work on this mode set device to user mode". Can someone please tell me how to set my device to user mode or erase what ever is lockled in my device between download and recovery. The issue I described with the device wanting to stay in download mode and how to handle it is described her http://forum.xda-developers.com/showpost.php?p=59372208&postcount=3 but as I mentioned I can't get passed anything that is not firmware through Odin. If I had to be locked in one version forever I would have preferred it be 5.0
I figured it out
planb234 said:
I am having some serious troubles with upgrading my Galaxy Note 4 SM-910P (Sprint). All was well in rooting, un-rooting, etc... I have the original 4.4.4 and the new 5.0 backed up and now I can't use anything other than the firmware the original firmware package through Odin. The problem started when I installed the [ROM]ViSiON-X N4 SPR 5.0.1 [Android L 5.0][N910PVPU1BOB7-R1][03-11-15]. It installed fine but when ever I was not watching it a problem occurred such as getting locked out of ny ext SD, or just plain un-rooting itself. It finally came down to it just kicked my device into download mode and would not reboot. I did used chains Odin root method and installed TWRP, which I can still do but can not flash or restore from TWRP or CWM recovery. It will take the firmware package fine and download the 5.0 update but always gets stopped from any other upgrade at recovery be it stock or custom. I have even used Kies to try and upgrade a few time. It will upgrade from NK1 to NK2 but still will not upgrade anything else past recovery. Every time I reboot I lose my WIFI password. After every boot it takes a minute for any network to be able to reach the device. It is paused until I re enter my WiFi password then it will say that Android is done upgrading and there is a toast message that says "device is set to factory mode some items won't work on this mode set device to user mode". Can someone please tell me how to set my device to user mode or erase what ever is lockled in my device between download and recovery. The issue I described with the device wanting to stay in download mode and how to handle it is described her http://forum.xda-developers.com/showpost.php?p=59372208&postcount=3 but as I mentioned I can't get passed anything that is not firmware through Odin. If I had to be locked in one version forever I would have preferred it be 5.0
Click to expand...
Click to collapse
I fianlly figured out the deal with TWRP not flashing.
The change between file systems is what TWRP won't flash.
To flash into the new, the old, or back up property check the file type.
Ext 2, Ext 4, F2FS, etc ...
To get recovery to load install from odin with auto boot disabled, remove battery, than vol + - menu and power.
the steps below..
1. Power off (complete) boot to download.
2. Load Odin, uncheck auto reboot, PDA TWRP. after it installs pull battery to exit.
3. Boot to recovery - wipe- advanced wipe -Repairor Change File System - Check System (go thruough each)
4. Repair and change each to the file type you want to flash
5. repair and or change the files for the zip you are going to flash
6. you have done all the rest before ....
Issue resolved, thread closed, thanks.
So I just rooted my S6 for the first time, and I'm not very experienced in rooting. I used ODIN to download, and did as told in the website here at galaxys6root.highonandroid .com/galaxy-s6-root/how-to-root-galaxy-s6s6-edge-on-android-6-0-1-marshmallow/ This meant my phone has a TWRP custom recovery but a custom one made by ManhIT, and I was successful in rooting, just that each time in recovery I do a system reboot, it hangs there so I do a force reboot which leads back to the lock screen just alright.
Then I wanted to download Xposed Framework, so I followed this tutorial to download it on Marshmellow 6.0.1: android.wonderhowto .com/how-to/install-xposed-framework-android-6-0-marshmallow-devices-0166278/
youtube .com/watch?v=B3qbY2CWz5M
I did everything, downloaded Xposed Framework for ARM64 Marshmallow devices but had to find the latest version, v85 for it and this is where the problem started. I went to TWRP recovery mode, and went to flash the xposed framwork zip, and clicked system reboot (of course it hanged, so force reboot), and since then it always has been stuck on the Samsung logo screen. I went back to recovery mode, did a factory reset, wipe all data, format data, and it still gets stuck on the logo screen.
Please please please please help!!!!
UPDATE: A possibility of this problem is due to having "No OS Installed".
what I would do if I were you is:
1. Smart switch emergency initialization to restore phone to factory fw with sn of the phone (upper right corner in SS menu) (connect phone only when you are asked, otherwise it will say your device is not supported)
2. flash CF autoroot for that model https://autoroot.chainfire.eu/
3 flash TWRP downloaded from https://twrp.me/devices/samsunggalaxys6.html for that phone model
and see what would happen (offcourse I would check after each step if the phone can boot)
brenner650 said:
what I would do if I were you is:
1. Smart switch emergency initialization to restore phone to factory fw with sn of the phone (upper right corner in SS menu) (connect phone only when you are asked, otherwise it will say your device is not supported)
2. flash CF autoroot for that model ]
3 flash TWRP downloaded from for that phone model
and see what would happen (offcourse I would check after each step if the phone can boot)
Click to expand...
Click to collapse
I fixed it already! I think what it was in the end was the lack of OS. Should've backed up my data before doing anything funny. Installed my OS again and bam my phone is up and running again :good: (had to delete the URL from this reply as I'm just a junior member)
Hi
This is really frustrating. I own many Samsung devices and never had any issue installing twrp, so I am not a noob when it comes to firing up Odin and flashing the image however I am stuck with this device.
I used couple guides with no success. ;( I cant get rid of the Samsung recovery and replace with TWRP. Odin says success but that is just a lie.
I tried both the lollilop bootloader and the older one then TWP with various versions (3.1x , 2.8.x) No luck.
Can anyone please provide me "working files" with "simple steps" in case I am missing out on some minor details. This is SM-P900 Kitkat 4.4.2 version.
- I flash the bootloader using the BL slot in dl mode
- I reboot to downloader again and and install TWRP
- I type adb revoot recovery
Boom, I am back to frigging Samsung recovery
Hi ,
This is a follow up
The only guide that worked for me is this one. It might be helpful to others.
https://forum.xda-developers.com/ga...guide-install-official-lollipop-p900-t3154362
I had trouble getting TWRP to take at first too. It seems Samsung overwrites the recovery upon rebooting so even though TWRP flashed successfully it just gets overwritten when the system restarts. The simple solution for me was to disable the Reboot option in Odin, install TWRP, manually shut down and then enter Recovery mode. Hope that helps. I came across this suggestion either in the thread linked to above or while googling.
Im installing into properly rooted and I have twrp 2.8.7. I want 3+ TWRP.
I flash with PDA/AP and with "autoreboot" unchecked. I power off and power+home+volUP for recovery.
Tablet enters a "enttering recovery" bootloop which can be only disrupted by going into power+home+volDWN to enter Download, and than I can flash with ODIN 2.8.7.
2.8.7 is the latest I can boot into. WHAT IS WRONG?!!!!!!!!! I lost hope, with flashing 100x
Did you try updating TWRP from inside TWRP?
Sent from my Samsung SM-P900 using XDA Labs
try do a full wipe from stock recovery . after that flash twrp selecting the ap and bl in ODIN twrp3.1....tar booth of them (AP & BL)
no no no i tried everything. but than I found out this post : https://s4.postimg.org/s3pel2ekd/this_guy.png and that solved the day!!
With p900 work perfect, but install hard. With this twrp 3.1 i install lineage 14.1, all works good.
My device has been bricked after attempting to root the device using Odin. (Samsung Galaxy S8+)
The device is stuck in a bootloop with the following accompanying error message in red on the boot screen:
"Only official released binaries are allowed to be flashed"
Here is what happened:
I flashed TWRP using Prince Comsy Odin. (The only Odin that actually works on the s8+)
I then booted into the TWRP recovery.
I followed a set of instructions, clearing the Cash and wiping
I restarted once then booted back into TWRP using Vol-Up + Power + Bixby
I was preparing to install Magisk & "no-verity-opt-encrypt-5.1" according to instructions to complete the root.
After installing "no-verity-opt-encrypt-5.1" with TWRP, the system rebooted and i was stuck in a boot loop.
I then got the error message in the bootloop "Only official released binaries are allowed to be flashed"
Since then i have not been able to successfully re-flash TWRP.
I now cant enter TWRP recovery boot using Vol-Up + Power + Bixby anymore
The bootloop is about 2 seconds long and too short to enter TWRP recovery
I can enter download mode and thats all
I have gotten the EXACT official stock ROM for the galaxy s8+ in South Africa with the carrier, Vodacom. (XFV-G955FXXU4CRL4-20181228165540)
If i flash with any official Odin version, it either fails or doesnt do anything for hours...
If i flash any Official stock Rom using Prince Comsy Odin then i do get the whole process of flashing with stock firmware being successful with the result saying "PASS".
The phone then reboots and i am still stuck in the same loop saying "Only official released binaries are allowed to be flashed"
This is after countless times and hours and hours of reflashing successfully with Official stock rom
I still cant get back into TWRP to do any partitioning or formatting or anything
I really don't mind if i lose all of my data and format the phone but PLEASE can you help me get my phone to work again..."?
Do i need to wait 7 days for the official flash to work?
Is there a way to completely wipe my phone without requiring going into Recovery mode with TWRP? Since i cant get into that state anymore either because of the Error Knox block or because of the Loop being too fast.
Please, please, PLEASE....please help me get my phone to work again...
Sincerely,
I know that Odin 3.13.1 works on the s8+ G955F as I flashed the latest BTU stock yesterday so try that version. I had a similar problem with the G950F and after flashing the files I booted into recovery mode and did a data and cache wipe and the phone rebooted. Flashing a stock rom should have wiped TWRP from the phone.
Reflash your rom or a later one, don't forget to take the tick out of the auto reboot box in Odin, boot to recovery and wipe everything and hopefully you will be good to go. Rebooting on mine took around 35 mins or so when going back to stock.
GalaxyS8+ SM-G955F: BRICK (Only official released binaries are allowed to be flashed
I have the same problem with the model G955F binaries 4 I can not always rooted
le_pentium said:
I have the same problem with the model G955F binaries 4 I can not always rooted
Click to expand...
Click to collapse
same for me !someone asked me to delete the RMM to resolve the problem
le_pentium said:
I have the same problem with the model G955F binaries 4 I can not always rooted
Click to expand...
Click to collapse
My problem is fix