Database Info

[Q] Samsung Galaxy Tab 2 10.1 ROM error

So I've just installed CM 11 (CyanogenMod) on my Samsung Galaxy Tab 2 10.1 (GT-P5113). I was running CM 10.2 and it notified me that there was an update available. And it was CM 11. So I installed it and went to CWM recovery and installed it. But, the installment failed, it said "Status 7". So I just rebooted the tablet, and decided to just not update it. But that's where the problem begins. The "Samsung Galaxy Tab 2 10.1" logo shows up and that's where my heart stopped beating :crying:. It did not show the CyanogenMod logo after that. Instead, it rebooted BACK into CWM. Once again, I rebooted the device. and same thing happened. And don't say "Well, plug your SD card into your computer and install the previous ROM you had on it." Cause I can't. My tablet supports SD Cards, but the SD Card won't stay in. And don't say "Plug in your tablet to your computer, and use Odin to reinstall the other ROM you had" Cause my computer for ,some stupid reason, doesn't recognize it. And if possible, can someone tell me how to turn it off? Cause if I try to turn it off, it just turns back on, and it's overheating.

Deleted...

Reply
bbugger said:
Have you tried by wiping the cache partition and dalvik cache from CWM ?
--> "Status 7" explains that your current CWM version is incompatible. Check your current version and you need at least CWM 6.0.4.4 version to install the CM11(Kitkat)
http://forum.xda-developers.com/showthread.php?t=2548476
Click to expand...
Click to collapse
Yes, I even factory reset it.

I finally fixed it on July 10, 2021. Here is what I did:
Downloaded the official firmware of Samsung Galaxy Tab 2 P5100.
I go to Bootloader (Odin Mode) and installed the firmware through Odin in my Computer.
Go to Recovery Mode (not TWRP cause I installed the official firmware) and cleared data & cache.
Powered the Tablet on and waited for 10 mins for its booting.
After its done, I downloaded KingRoot to root the tablet.
Rooted and I go to Odin mode again to install TWRP Recovery.
Go to Recovery Mode and installed the right Custom ROM for my tablet.
Opened and successfully its working af. Audio, Video, all are working.
PROBLEM: INSTALLED THE WRONG CUSTOM ROM ON MY DEVICE (espressowifi) MUST HAVE INSTALLED (espresso3g).
This problem lasted for 3 days xD. this is the solution

SoIomon said:
I finally fixed it on July 10, 2021. Here is what I did:
Downloaded the official firmware of Samsung Galaxy Tab 2 P5100.
I go to Bootloader (Odin Mode) and installed the firmware through Odin in my Computer.
Go to Recovery Mode (not TWRP cause I installed the official firmware) and cleared data & cache.
Powered the Tablet on and waited for 10 mins for its booting.
After its done, I downloaded KingRoot to root the tablet.
Rooted and I go to Odin mode again to install TWRP Recovery.
Go to Recovery Mode and installed the right Custom ROM for my tablet.
Opened and successfully its working af. Audio, Video, all are working.
PROBLEM: INSTALLED THE WRONG CUSTOM ROM ON MY DEVICE (espressowifi) MUST HAVE INSTALLED (espresso3g).
This problem lasted for 3 days xD. this is the solution
Click to expand...
Click to collapse
Really are you spamming all over the forum with same post...
You don't need to install kingroot!!
Skip this on prehistoric tab, not needed, no protection aka bootloader unlock etc.
Simply install TWRP from odin and your done. Next you can install magisk, really simple.
That's it.

I just posted in this forum...

Galaxy S6 Unable to boot into TWRP recovery

..

you asked the same question I was going to ask....hopefully someone replies to you, I'll keep asking around the interwebs for a solution I already asked Max Lee and still no reply. I'm rooted too (cf auto root) but i want twrp just in case.

I'm trying for 2 days for my 920i and I ha e twrp now I flashed 920f and boot fine!
https://www.fshare.vn/file/B38M8WL1ZQDE

merrykid said:
I'm using G920I Australia version.
I can successfully root using CF-Auto-Root.
But I can not get into TWRP recovery after I flashed that (tried both versions of the recovery) using odin. It stops at the first screen (samsung logo). I tried using adb commond reboot recovery and the hardware key (volum up+power+home), both of them do not let me in to the custom recovery.
I had tried enabled knox before flash TWRP, which made it into boot loop. And then recoveried using the official firmware. Now I can only get into the official recovery.
Any suggestions for how to get into the TWRP?
BTW, how to backup the pit file using adb? On previous models it was mmcblk0, but Galaxy S6 seems to have changed the memory map to sda1, sda2, etc.
Click to expand...
Click to collapse
I got the 920i Aus version too. I was told two different things.
Update firmware to AOD1 and flash TWRP and it should work.
-or-
Use the 920t as jah2110 says. I would find the file from somewhere more 'reputable'.
Downloading a AOD1 firmware now from sammobile which is awful slow. First one I tried to flash gave me fail in odin so im trying a different one.

Stuck at the Samsung logo after trying to flash the recovery via twrp app, now it doesn't even boot normally. so if you want to install twrp don't use the app, G920I telstra version

Just flash an AOD1 firmware or more. The new zealand firmware for instance and then twrp is gonna work.
If you are stuck after flashing twrp on the australian firmware just flash root using odin and you will be able to start your device again

massacreur75010 said:
Just flash an AOD1 firmware or more. The new zealand firmware for instance and then twrp is gonna work.
If you are stuck after flashing twrp on the australian firmware just flash root using odin and you will be able to start your device again
Click to expand...
Click to collapse
really? i didn't know that, anyway, if you want to update/reinstall the stock firmware, sammobile is so bloody slow, i deem it unusable, so i found this gem, much faster than sammobile, i downloaded at 1.3MB/s so it takes just over 20 minutes for the whole firmware. http://galaxys6root.highonandroid.com/galaxy-s6-stock-firmware/ give it a try if sammobile just pisses you off.

Yes it took me a few days to figure it out and everyone kept saying that twrp should work ...but thats just a matter of firmware version.

So is there a fix? I can get root but TWRP just sites and the boot screen.

I've been in the same situation using a Aussie Voda 920i, I was able to root using CF auto root but then had deep sleep issue & couldn't install TWRP. Now i've installed the singapore firmware & also got TWRP running but cant root.
If I use ODIN to root its gets stuck on logo screen & If I use TWRP it appears to go OK but just doesn't work. Also although CPU Spy says I am getting deep sleep battery life seems awfull

Twrp gave me the boot screen for infinite as well. I live in Alaska. I had to reflash root file to boot. Never got twrp to work. I tried to flash via app. I don't even want more possible headache flashing it with Odin.

Surely if you've got root you can install twrp from the app store and let it replace the recovery.

Same issue
I had exactly the same issue, flashed TWRP from a reliable source and my phone bricked at start up logo screen, could only get into download mode, once i did that i reflashed with ODIN and autoroot file and phone came back alive. Thank god.
---------- Post added at 10:47 PM ---------- Previous post was at 10:43 PM ----------
Tried to install TWRP from official APP, said it installed recovery successfully would you like to attempt reboot and get into recovery, got stuck again at boot screen LOLLLL awesome...... piece of ****ware.

Same for me G920F. I tried twice both failed.
First time use this thread The phone was successfully rooteded. I installed "TWRP Manager.apk". It cause phone infinitely reboot.
Then I restore the stock ROM (you won't know how painful to download the 1.5G+ ROM).
Second time, I rooted again. And tried use freshily (?) to manually install an img in sdcard. It said success and reboot. But it stayed in boot logo.
I restore the stock ROM again (but the kies3 needs to download ROM again!).
I will not try a third time unless there is an right answer.
__________________
btw, the first one say 'oem unlock' must be checked. But I do not have this option, maybe because my phone is unlocked already (not binded to any one).

GrandMstrBud said:
So is there a fix? I can get root but TWRP just sites and the boot screen.
Click to expand...
Click to collapse
im a Noob but i was told that my TWRP was being overwritten during the reboot and that i Must flash a custom kernal after rooting so that the TWRP wouldn't be overwritten

SillyTAO said:
im a Noob but i was told that my TWRP was being overwritten during the reboot
Click to expand...
Click to collapse
This only happens when you fail to force the reboot into recovery yourself.
If you let the phone reboot automatically after flashing, it will be stuck @ bootloop; so you have to be faster & hold the vol up+home+power buttons *immediately* when Odin finishes the process.
Don't bother removing the cable or waiting for the screen to change, that will be too slow.

Cant boot in twrp after flashing thru odin
knox counter trips

Cannot get rid of CM10 / cannot reset the device (Samsung Galaxy Tab 2, GT-P5110)

Samsung Galaxy Tab 2
GT-P5110
Android version: 4.2.2.
Hi there, I have a rooted device running on CyanogenMod 10.1.3-p5110, with a custom recovery CWM 6.0.2.7
After 3 years (or so) of smooth operation it started to slow down and getting unstable from time to time, so I decided to factory reset.
I did the factory reset from CWM following the regular regular instructions, however after reset completion the devices booted back to the original CM10, with all the original data (nothing was cleaned at all or reset). I tried several times from - cleaning cache, date, system, dalvik cache, factory reset ... still the same result.
I also tried to replace the CWM with TWRP (GT-P5110_TWRP_3.0.0-0.tar.md5) - same result, it shows success but if I restart to recovery, it goes to CWM 6.0.2.7
If I boot into recovery (CWM) and flash any rom, it shows success and then reboots (guess what) into the original CM 10 like nothing happened.
I tried to flash the stock firmware using Odin. I got an original firmware "P5110XXDMI1_P5110OXXDMJ1_HOME.tar.md5" from a reliable source (sammobile)
Model:GT-P5110, Model name:GT-P5110, Country:Czech Republic, Version:Android 4.2.2, Changelist:1709803, Build date:Wed, 18 Sep 2013 06:13:11 +0000, Security Patch Level: N/A, Product code:XEZ, PDA: P5110XXDMI1, CSC5110OXXDMJ1
Every time I flash the original stock rom with Odin, the ID:COM box in Odin goes green and everything looks just fine but after reboot the tablet restarts to the original CM10. I was using Odin3-v1.85, as well as newer versions of the tool - namely Odin3_v3.07, Odin3_v3.11.1, all with the same result.
I even tried form very scratch - repartitioning the device using a .pit file "signed_espresso_20120220_16G.pit", flashing stock using Odin, same result.
I also tried flashing rom Heimdall Suite - same result
I have no problem to connect to the device using ADB shell and communicate with the device ...
However, I am not any Android guru, so I cannot "decode" what I get.
To me it seems like I somehow messed up my partitions or mounts and thats the reason for the strange behaviour.
So now I am stuck in strange state, which I cannot call a bootloop ... seems like I am running some sort of cached system or someting and I am unable to get out of with any standard tool available. As I said ... device is rooted, running CWM and I can boot to any mode I want ... download, recovery, system.
Any help will be more than appreciated.

You could have an faulty emmc firmware or your emmc reached end of life.
You are from europe? I know someone who can fix it for you.
You can also read the faq on my github userpage for more information about your bug.

kozyn said:
Samsung Galaxy Tab 2
GT-P5110
Android version: 4.2.2.
Hi there, I have a rooted device running on CyanogenMod 10.1.3-p5110, with a custom recovery CWM 6.0.2.7
After 3 years (or so) of smooth operation it started to slow down and getting unstable from time to time, so I decided to factory reset.
I did the factory reset from CWM following the regular regular instructions, however after reset completion the devices booted back to the original CM10, with all the original data (nothing was cleaned at all or reset). I tried several times from - cleaning cache, date, system, dalvik cache, factory reset ... still the same result.
I also tried to replace the CWM with TWRP (GT-P5110_TWRP_3.0.0-0.tar.md5) - same result, it shows success but if I restart to recovery, it goes to CWM 6.0.2.7
If I boot into recovery (CWM) and flash any rom, it shows success and then reboots (guess what) into the original CM 10 like nothing happened.
I tried to flash the stock firmware using Odin. I got an original firmware "P5110XXDMI1_P5110OXXDMJ1_HOME.tar.md5" from a reliable source (sammobile)
Model:GT-P5110, Model name:GT-P5110, Country:Czech Republic, Version:Android 4.2.2, Changelist:1709803, Build date:Wed, 18 Sep 2013 06:13:11 +0000, Security Patch Level: N/A, Product code:XEZ, PDA: P5110XXDMI1, CSC5110OXXDMJ1
Every time I flash the original stock rom with Odin, the ID:COM box in Odin goes green and everything looks just fine but after reboot the tablet restarts to the original CM10. I was using Odin3-v1.85, as well as newer versions of the tool - namely Odin3_v3.07, Odin3_v3.11.1, all with the same result.
I even tried form very scratch - repartitioning the device using a .pit file "signed_espresso_20120220_16G.pit", flashing stock using Odin, same result.
I also tried flashing rom Heimdall Suite - same result
I have no problem to connect to the device using ADB shell and communicate with the device ...
However, I am not any Android guru, so I cannot "decode" what I get.
To me it seems like I somehow messed up my partitions or mounts and thats the reason for the strange behaviour.
So now I am stuck in strange state, which I cannot call a bootloop ... seems like I am running some sort of cached system or someting and I am unable to get out of with any standard tool available. As I said ... device is rooted, running CWM and I can boot to any mode I want ... download, recovery, system.
Any help will be more than appreciated.
Click to expand...
Click to collapse
Once I had same problem with Motorola xoom and guess what was realy the problem. It was the external SD memory remove it then flash the stock rom.. If problem persists see with Andi

Thank you for your response. To me it also seems like faulty emmc. I have check the frequently asked questions on your blog and the description there exactly matches with what I'm experiencing on my device. Yes I am from Europe, Czech Republic. I have already tried to get in touch with two people who have the proper tooling to flash the firmware (JTAG). Hope I get some response fast and the solution is going to work. Still if you have someone in the CZ that you can recommend I'm grateful for any advice.

@zidane: All of the above steps where performed without external SD card.

kozyn said:
@zidane: All of the above steps where performed without external SD card.
Click to expand...
Click to collapse
Don't lose hope Try latest recovery 3.0.2.5 and the cm13 22/9 by Andi (made specially for certain cases like yours the files are in his folder the link in his signature ) if nothing happens then I guess dev Andi will be glad to help you fix your Emmc. contact him to provide you with the contacts..
Good luck

zidane01 said:
Don't lose hope Try latest recovery 3.0.2.5 and the cm13 22/9 by Andi (made specially for certain cases like yours the files are in his folder the link in his signature ) if nothing happens then I guess dev Andi will be glad to help you fix your Emmc. contact him to provide you with the contacts..
Good luck
Click to expand...
Click to collapse
@zidane01: thanx for cheerin' up
I have tried to replace my CWM 6.0.2.7 with TWRP 3.0.2.5, 3.0.2.6. from a .zip file using current recovery. Result is the same as described - after I reboot to recovery (using advanced option in CWM) it boots back to the original CWM 6.0.2.7. Flashing latest CM13 (as of 27/9/2016, downloaded from Andi's site) from CWM 6.0.2.7 ends with error. The tablet seems like READ ONLY not matter what I do. Maybe I am doing something wrong. I can describe the procedure step by step in detail, if you wish.

kozyn said:
@zidane01: thanx for cheerin' up
I have tried to replace my CWM 6.0.2.7 with TWRP 3.0.2.5, 3.0.2.6. from a .zip file using current recovery. Result is the same as described - after I reboot to recovery (using advanced option in CWM) it boots back to the original CWM 6.0.2.7. Flashing latest CM13 (as of 27/9/2016, downloaded from Andi's site) from CWM 6.0.2.7 ends with error. The tablet seems like READ ONLY not matter what I do. Maybe I am doing something wrong. I can describe the procedure step by step in detail, if you wish.
Click to expand...
Click to collapse
sounds like that you have a faulty emmc. same what android-andi said.

@kozyn Hi buddy.. have the same thing on a p5110 -- emmc is in read only mode and I can't seem to PM Andi for some contacts.
Can you help me recover this galaxy tab2 pls? Appreciate your time

[Recovery] Stuck in TWRP splash screen Samsung Galaxy S7

Ok so i did the following in this order.
Installed twrp 3.3.1.0 via odin which worked perfectly.
Installed lineage os 17.1.
Installed no verify.
Installed gapps.
Had it all up ad running perfectly fine for a few weeks.
I decided to try a different os called pixel experience which i also got running just fine.
However i didn't like it and decided to go back to lineage os.
I used the exactly the same steps i used previously to wipe the system os inside twrp.
however when i tried to wipe the data it failed and then my phone auto rebooted and now i can't do anything.
It wont charge so needs to be plugged in to even turn on.
Once its plugged in it auto boots to a twrp splash screen and is stuck there and cant get into the twrp menu do install an os.
I can get into the download mode and odin detects the phone so i tried reinstalling twrp which says it was successful but when i reboot it gets stuck in the same splash screen.
i also tried reinstalling the original bl ap cp csc files that i had previously had installed which after many attempts finally go them to install but still loads the twrp splash screen and gets stuck there.
ive tried using adb fastboot loader using cmd but it doesn't detect the device so cant do any that way at all
i fear my phone is completely bricked and unusable please if you can offer any help would be much appreciated as im at the point where im looking to buy another phone as this is my old phone atm.

HI
Can't you come back to the last official firm for our S7 ?
It is an Oreo 8.0.0 firm
Have a look at samfirm ( or updato) and search for GF930FXXS8ETC2_xxx.zip
U flash that with Odin ( 3.13.1 I think) and yr phone is back to life !!!
Hope this helps

No Rom and Corupt Recovery S2 i9100

Hi, my Galaxy S2 was working great with kitkat that I flashed and then thought why not try a new LiniageOS. That Rom failed to install and I figured I would try an updated TWRP recovery. I tried the newest version and it failed to install. It warned me I had no rom installed on reboot but I rebooted anyway and went back to recovery. No issues until I tried an earlier version of TWRP that failed during install as well and now is in boot loop with no Rom. Can not enter recovery mode either. Can enter download mode but Odin and my computer do not seem to detect my phone when plugged in via usb. Tried 3 usb cables but only one computer available. Samsung usb drivers installed.
Any ideas what to do next.
Thanks!

I have a Galaxy S2 with a custom rom, after a year the s2 won't boot. Only I see encryption ... I have tried different stock roms and odin versions and got not succes. I have read about Nand rw corruption. Is it possible and how House Cleaning Services Dubai

Welcome to XDA!
Try to post in desired device section so your chances to get help are bigger, also please read forum rules.
Enjoy!