Hello everyone, I have recently been trying to gain compatibility with Lineage OS 16(Android 9 Pie) along with Open GApps, following all the steps of many tutorials, however it does not work at all. Unfortunately, I am inexperienced with this as this is my first time rooting a phone. I loaded the phone into TWRP, however loading the OS shows the loading screen, but then just goes back into TWRP. I apologize if someone has already made a post on this, however I couldn't find anyone having this problem on this device. I used Kingoroot since I didn't have a data cable on myself at the time, so that could be an issue with the bootloader...? I'm really not sure, and help would be much appreciated.
I didn't do this on the Note 2 forum because it is not hard to say that forum is barely viewed, and it could take weeks for me to get a response.
Before I deleted the original OS, it was on Android Kit Kat
hypixel said:
Before I deleted the original OS, it was on Android Kit Kat
Click to expand...
Click to collapse
I have issue too except i didnt use Kingroot but use odin.
i tried to flash the rom and got the following error msg. I attached screenshot. Does anyone have any solutions to this?
The zip file is lineage-16.0-20200101-unofficial-t0lte.zip
My phone is SGH-T889. It specifically says the zip file is for this model but somehow it doesnt recognise my phone model. Did i wipe something that wipe that along??
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Much thanks
Ok, i resesrch some and got rid of the Error 7 msg by deleting the "assert" lines in the updater.script
But now i get Error 6. Anyone with any ideas?
Android_noop said:
I have issue too except i didnt use Kingroot but use odin.
i tried to flash the rom and got the following error msg. I attached screenshot. Does anyone have any solutions to this?
The zip file is lineage-16.0-20200101-unofficial-t0lte.zip
My phone is SGH-T889. It specifically says the zip file is for this model but somehow it doesnt recognise my phone model. Did i wipe something that wipe that along??
View attachment 5263095
Much thanks
Click to expand...
Click to collapse
Have you tried different roms, or only this one?
hypixel said:
Have you tried different roms, or only this one?
Click to expand...
Click to collapse
Only this one
Android_noop said:
Ok, i resesrch some and got rid of the Error 7 msg by deleting the "assert" lines in the updater.script
But now i get Error 6. Anyone with any ideas?
View attachment 5263799
Click to expand...
Click to collapse
Hey, I found out that the issue (at least for me) was that my phone did not have enough storage/the partitions were creating the issue. I am not sure how to solve this, but you may be having the same issue
hypixel said:
Hey, I found out that the issue (at least for me) was that my phone did not have enough storage/the partitions were creating the issue. I am not sure how to solve this, but you may be having the same issue
Click to expand...
Click to collapse
Did u wipe before install?
If one wipes then installs, there should be enough storage space right?
Android_noop said:
Did u wipe before install?
If one wipes then installs, there should be enough storage space right?
Click to expand...
Click to collapse
Yes, I did wipe, however I think the issue is that the phone is creating partitions. This phone was bought many years ago, so it is also possible that the storage is innsuficient for newer versions of Android.
hypixel said:
Yes, I did wipe, however I think the issue is that the phone is creating partitions. This phone was bought many years ago, so it is also possible that the storage is innsuficient for newer versions of Android.
Click to expand...
Click to collapse
Well how did people install this OS onto their note2 on youtube??
Android_noop said:
Well how did people install this OS onto their note2 on youtube??
Click to expand...
Click to collapse
I think that they bought higher storage models
Related
Today I got my Eken T10A, and I installed Playstore/superuser with a root tool everything is fine until I tried to install some other apps and android is giving the error ''could not install internal storage full''
And then I looked at the Storage info and saw this.
See first attached img
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So I Though oke weird bug lets reset the tablet, and I put it in Recovery mode and saw this...
second attached img
I'm out of options tried everything, ICS is even resetting now at every reboot to the stock settings, wizard and all....
Does anyone know how to Reflash the tablet? or some sort?
After many trial and error's I've seem to have it fixed
I just installed a CWM recovery.img wiped the /system reformat the partition, and flashed a new os .img with livesuit 1.09
That simple I could even think of it....
42dpi said:
Today I got my Eken T10A, and I installed Playstore/superuser with a root tool everything is fine until I tried to install some other apps and android is giving the error ''could not install internal storage full''
And then I looked at the Storage info and saw this.
See first attached img
So I Though oke weird bug lets reset the tablet, and I put it in Recovery mode and saw this...
second attached img
I'm out of options tried everything, ICS is even resetting now at every reboot to the stock settings, wizard and all....
Does anyone know how to Reflash the tablet? or some sort?
After many trial and error's I've seem to have it fixed
I just installed a CWM recovery.img wiped the /system reformat the partition, and flashed a new os .img with livesuit 1.09
That simple I could even think of it....
Click to expand...
Click to collapse
Where did you get CWM for Ekin T10A? Thanks in advance
homen3 said:
Where did you get CWM for Ekin T10A? Thanks in advance
Click to expand...
Click to collapse
I used this script(i can insert links PM me for the link),beware it's not perfect it's a recovery.img from a novel 7 device so buttons won't work, I used a USB keyboard 1=back 2=enter 3=up
If something fails you can always flash it back with livesuit, I just used CWM for partition format en deleting partitions.
42dpi said:
I used this script(i can insert links PM me for the link),beware it's not perfect it's a recovery.img from a novel 7 device so buttons won't work, I used a USB keyboard 1=back 2=enter 3=up
If something fails you can always flash it back with livesuit, I just used CWM for partition format en deleting partitions.
Click to expand...
Click to collapse
hi,
send you a pm for link, thanks
About Eken t10a
danisath said:
hi,
send you a pm for link, thanks
Click to expand...
Click to collapse
Hi guys,
I have eken t10a and it isn't start up. always showing android logo. does anybody knows there i can get firmware and hot to upgrade it? I try downloading from eken website but the download takes 2days.
Thanks
bushass said:
Hi guys,
I have eken t10a and it isn't start up. always showing android logo. does anybody knows there i can get firmware and hot to upgrade it? I try downloading from eken website but the download takes 2days.
Thanks
Click to expand...
Click to collapse
sorry for delay: you can use it: http://www.ekoore.com/web/it/prodotti/tablet/pike/download-3.html
i have followed all the steps using NRT to unlock boot-loader and root the phone.
Installed TWRT manager and flashed the recovery.
Now i am trying to flash CM12 for the first time and stuck with error message "can't install this package on top of incompatible data" during flashing .
downloaded the following flash zip from CM website: cm-12.1-20150901-SNAPSHOT-YOG4PAO237-hammerhead.zip (281.77 MB)
Can any one help me what needs to be done to proceed further.
i didnt wipe the data before. Now its working and closing the thread
I wiped everything on my phone via TWRP. Still getting this error!
This topic is old but in case someone else gets here I got a solution - Change /data partition filesystem to ext4 or other supported by ROM
mesaj said:
This topic is old but in case someone else gets here I got a solution - Change /data partition filesystem to ext4 or other supported by ROM
Click to expand...
Click to collapse
How did you do that?
dsarcinelli said:
How did you do that?
Click to expand...
Click to collapse
http://forum.xda-developers.com/nexus-4/help/guide-detailed-f2fs-manual-format-guide-t3264185
This guide might help, you do it in TWRP by going to Format > Advanced > select partition > Change filesystem > Ext4
Wiping data worked for me
2sumanth said:
i didnt wipe the data before. Now its working and closing the thread
Click to expand...
Click to collapse
In twrp, I had to fumble around to find advance wipe to clear data but worked like charm after that.
Thank you!
xiaomi note 4g dior
Let me tell my story,
My friend gave me an old xiaomi note 4g which was stuck at the MI icon on boot,
Luckily the phone did not lock boot-loader
So I use xiaomi flash rom to flash global room , it worked after i tried sometimes.
Then I booted to the phone, and other problem came, the phone was linked with an Mi Account , and my friend forgot everything about it
not email, no phone number
I did a search and they said the only way to bypass the MiAccount is using a Resurrection ROM or balallala
so I ended up with using
1. fastboot to install twrp
2. open twrp --> open adb sideload mode.
3. Open window command line and install Resurrection ROM though adb sideload
While installing rom though adb slideload , i got the same issue with topic
SO i cleared data and tried again,
IT WORKED , NO MORE ****ING MiAccount
THANK a lot
:fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi
Playing with my wife's Nexus 5, bootloader unlocked, rooted, and latest TWRP installed but when trying to flash from android 6.0.1 to Lineage, I'm getting an error 7 image shown I hope.....
Is this just because I haven't wiped the data first ? (I'm fairly sure but...)
I dont dare try 'cause if it's not that she'll kill me, so would like to be sure before I wipe all her data..
Thanks
Update, it was that I just wiped all except the SD and flashed, all is just great
Hi all! 2 weeks ago I got the S7.
First thing I did was installing root and xposed.
Then I followed this guide to install root and recovery. At the beginning it was all good, despite some errors (described below). When I rebooted the phone SuperSU was working and root was granted.
Today I initiated titanium backup and root failed. When I tried to start SuperSU I got a messsage saying SuperSU is not installed and can't be installed. Quite confusing.
After that I started TWRP. Trying to install SuperSU again gave me the error message in the image below.
Do any of you know where the problem could be? I Googled for a while and found some older Galaxies have a corrupt memory issue that could be similar. Could this be my problem? Any guidance for solving it?
The device is working for now but I don't dare to reinstall any ROM or touching anything. I'm scared it'll die on me and I really like this phone.
Thanks a lot guys!
G930FXXU1APB4
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I saw my phone is encrypted, but there's no option to change it
I skiped 10 step in the twrp guide, colud this be the problem? but... why was root working some days ago and not anymore?
Had the security policy updated, right? That destroys SU. There are plenty threads about that one already.
centroi said:
I saw my phone is encrypted, but there's no option to change it
I skiped 10 step in the twrp guide, colud this be the problem? but... why was root working some days ago and not anymore?
Click to expand...
Click to collapse
To remove Samsung encryption you must format your data in twrp, otherwise root will not work.
TheSproker said:
To remove Samsung encryption you must format your data in twrp, otherwise root will not work.
Click to expand...
Click to collapse
Will it work? in twrp the data partition show 0mb in all parts, cant read data partition. Should I format anyway?
Thank you!
centroi said:
Will it work? in twrp the data partition show 0mb in all parts, cant read data partition. Should I format anyway?
Thank you!
Click to expand...
Click to collapse
Yes, it worked for me. Just follow the 10.th step of this guide: http://forum.xda-developers.com/galaxy-s7/development/recovery-official-twrp-herolte-t3333770
TheSproker said:
Yes, it worked for me. Just follow the 10.th step of this guide: http://forum.xda-developers.com/galaxy-s7/development/recovery-official-twrp-herolte-t3333770
Click to expand...
Click to collapse
IT's solved.
Thank you!!
centroi said:
IT's solved.
Thank you!!
Click to expand...
Click to collapse
You're welcome
TheSproker said:
Yes, it worked for me. Just follow the 10.th step of this guide: http://forum.xda-developers.com/galaxy-s7/development/recovery-official-twrp-herolte-t3333770
Click to expand...
Click to collapse
will this method work on HTC 820G+ am experiencing the same problem.
why my pixel always show some unknown file in twrp like this
i cant find my "download" file and zip file that i already put in the phone
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
pls help
I have had the same issue with TWRP. While I cannot find any cause for it, a reboot (or more than one) into recovery seems to eventually result in the actual files being shown. This is even more of an issue if installing the .img and needing to then install a .zip. It can take a couple times. Strange, this has only happened with my wife's Pixel and not my XL but that may just be luck. Did not have this issue with Apha 2, only RC1.
qe7913468250 said:
why my pixel always show some unknown file in twrp like this
i cant find my "download" file and zip file that i already put in the phone
Click to expand...
Click to collapse
It's because the data on your Pixel is encrypted AND TWRP can't decrypt at that time for some reasons. Keep rebooting it until it can successfully decrypt.
quangtran1 said:
It's because the data on your Pixel is encrypted AND TWRP can't decrypt at that time for some reasons. Keep rebooting it until it can successfully decrypt.
Click to expand...
Click to collapse
i have try to reboot for 10 times and it didnt change
what can i do
my twrp is A2 version
qe7913468250 said:
i have try to reboot for 10 times and it didnt change
what can i do
my twrp is A2 version
Click to expand...
Click to collapse
Don't know what to advise you further since it happens to all of us. I would only provide suggestions on issues that I myself came across. I can only relay my experience (Verizon). I use TWRP RC1. It happens to me whether or not I have my device passworded. It happens to me more often when I change boot slot. In other words, if I go to Reboot, change slot, and reboot, I would get that situation. But if, from inside TWRP, I power off the phone, then I can get a successful decryption pretty much 95% of the time. It seems like a programmatic timing issue to me. From my app development experience, sometimes if task B gets executed before task A because of driver issues or timing issues, I'd get undesired results (not unexpected, just undesired).
Are you doing a full reboot or just rebooting Recovery? I find it often have to do a full reboot for it to pick it up sometimes.
cambunch said:
Are you doing a full reboot or just rebooting Recovery? I find it often have to do a full reboot for it to pick it up sometimes.
Click to expand...
Click to collapse
Agreed.
qe7913468250 said:
i have try to reboot for 10 times and it didnt change
what can i do
my twrp is A2 version
Click to expand...
Click to collapse
Try changing your lock screen method (in the os) to something else. I use a pattern and have had no trouble getting twrp to prompt me for it.
try to reboot recovery and system will work, I have encountered same issue.
had this issue the other day when updating to the January build. while in your current rom delete the twrp folder within your internal storage. next time you restart into TWRP, it will prompt you to enter the decryption password
Or use an external USB drive and bypass the entire decryption problem altogether.
use SD card or use OTG cable with pendrive and put file their and select OTG directory from twrp.
So recently my phone was having minor problems.. like randomly restarting and showing overheating warning when the phone isn't even hot.. so ive decided to update it through RSA but turns out RSA dont have the update my phone needed.. I've tried multiple update but not even the china one works even though the phone was originally from china.. can anyone please help.. I'm so sad right now because i dont want to loose this phone
P.s after installing the update from RSA the phone just stuck in boot up then cuts of after
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You have a Pro not a Duel. You will need this first, extract it and place all the files within it to /ProgramData/RSA/Download/romfiles/L79031(delete whats currently in this folder first, then move all the files you downloaded into this folder). Now run RSA and and flash the correct firmware for your Legion Pro. Upon boot, make sure to run System Update to the latest firmware available (you will have to do this two or three times).
&(*) said:
You have a Pro not a Duel. You will need this first, extract it and place all the files within it to /ProgramData/RSA/Download/romfiles/L79031(delete whats currently in this folder first, then move all the files you downloaded into this folder). Now run RSA and and flash the correct firmware for your Legion Pro. Upon boot, make sure to run System Update to the latest firmware available (you will have to do this two or three times).
Click to expand...
Click to collapse
I think I'm in the same situation- And your link doesn't work. What is 'this'? Can't find any info on it!!!
@xXHotBoxXx420 ,
Pretty sure that link was removed. Here is where you'll find the firmware for your device. Just follow the instructions you quoted by @&(*) after gathering your models firmware.
project_2501 said:
@xXHotBoxXx420 ,
Pretty sure that link was removed. Here is where you'll find the firmware for your device. Just follow the instructions you quoted by @&(*) after gathering your models firmware.
Click to expand...
Click to collapse
Hey thank you, but I actually found a CN ZUI 13.5 ROM that I've never found before and flashed it, and it worked. I have Android 12 now, but my cellular still isn't working, and I want a ROM with Google apps by default- one more like the stock android. I assume that's the global version. Trying to go about unlocking my bootloader and flashing the Legion Duels ROM on my Legion pro, I've heard there is a way. Just need to find a good tutorial.
@xXHotBoxXx420 ,
Here is a guide that will work on this device, make sure you read it carefully and backup what it states. I suggest you read this other guide first so you can recover from any mistakes.
project_2501 said:
@xXHotBoxXx420 ,
Here is a guide that will work on this device, make sure you read it carefully and backup what it states. I suggest you read this other guide first so you can recover from any mistakes.
Click to expand...
Click to collapse
Helpful, but I'm wondering if I can do it the other way around; CN to Global rather than Global to CN. I'm sure it probably works the same way, backup partitions and all that. I just figured you had to unlock the bootloader to be able to flash other ROMs but I have flashed the ROW & EE ROMs and ended up with crashdump/bootloop. Didn't realize flashing partitions could fix that. I think I'll give it a try. Thanks