twrp - can't install this package on top of incompatible data - Nexus 5 Q&A, Help & Troubleshooting

i have followed all the steps using NRT to unlock boot-loader and root the phone.
Installed TWRT manager and flashed the recovery.
Now i am trying to flash CM12 for the first time and stuck with error message "can't install this package on top of incompatible data" during flashing .
downloaded the following flash zip from CM website: cm-12.1-20150901-SNAPSHOT-YOG4PAO237-hammerhead.zip (281.77 MB)
Can any one help me what needs to be done to proceed further.

i didnt wipe the data before. Now its working and closing the thread

I wiped everything on my phone via TWRP. Still getting this error!

This topic is old but in case someone else gets here I got a solution - Change /data partition filesystem to ext4 or other supported by ROM

mesaj said:
This topic is old but in case someone else gets here I got a solution - Change /data partition filesystem to ext4 or other supported by ROM
Click to expand...
Click to collapse
How did you do that?

dsarcinelli said:
How did you do that?
Click to expand...
Click to collapse
http://forum.xda-developers.com/nexus-4/help/guide-detailed-f2fs-manual-format-guide-t3264185
This guide might help, you do it in TWRP by going to Format > Advanced > select partition > Change filesystem > Ext4

Wiping data worked for me
2sumanth said:
i didnt wipe the data before. Now its working and closing the thread
Click to expand...
Click to collapse
In twrp, I had to fumble around to find advance wipe to clear data but worked like charm after that.
Thank you!

xiaomi note 4g dior
Let me tell my story,
My friend gave me an old xiaomi note 4g which was stuck at the MI icon on boot,
Luckily the phone did not lock boot-loader
So I use xiaomi flash rom to flash global room , it worked after i tried sometimes.
Then I booted to the phone, and other problem came, the phone was linked with an Mi Account , and my friend forgot everything about it
not email, no phone number
I did a search and they said the only way to bypass the MiAccount is using a Resurrection ROM or balallala
so I ended up with using
1. fastboot to install twrp
2. open twrp --> open adb sideload mode.
3. Open window command line and install Resurrection ROM though adb sideload
While installing rom though adb slideload , i got the same issue with topic
SO i cleared data and tried again,
IT WORKED , NO MORE ****ING MiAccount
THANK a lot
:fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi
Playing with my wife's Nexus 5, bootloader unlocked, rooted, and latest TWRP installed but when trying to flash from android 6.0.1 to Lineage, I'm getting an error 7 image shown I hope.....
Is this just because I haven't wiped the data first ? (I'm fairly sure but...)
I dont dare try 'cause if it's not that she'll kill me, so would like to be sure before I wipe all her data..
Thanks
Update, it was that I just wiped all except the SD and flashed, all is just great

Related

Error AudioFx One plus

Hi I have a problem with my one plus you to buy the one plus wine me with coloros system try to install the cm11s but I get a AudioFX error when I set it up and try to put a modified ROM but when the system comprises restarts many times one plus could help me what would be the problem ??
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Have you wiped in recovery?
tiny4579 said:
Have you wiped in recovery?
Click to expand...
Click to collapse
if friend wipe data and data recovery system when that one plus buy coloros had the ROM
legionpr said:
if friend wipe data and data recovery system when that one plus buy coloros had the ROM
Click to expand...
Click to collapse
Huh? I didn't quite understand what you were saying. Please try to be clearer.
Are you saying it was wiped while still using coloros? If you booted coloros at all after wiping, you should wipe again to clear any coloros user data out.
tiny4579 said:
Huh? I didn't quite understand what you were saying. Please try to be clearer.
Are you saying it was wiped while still using coloros? If you booted coloros at all after wiping, you should wipe again to clear any coloros user data out.
Click to expand...
Click to collapse
Forgiveness is that I am using a translator jejej my problem is that I bought a one plus one plus and that came to me with the rom coloros the who sold me the one plus i said that was not Chinese that one plus i what i want is to put the rom cm11s but when you install this rom audiofx returns error and if I give you a custom rom restarted many times
Try these steps
- boot in recovery
- factory reset your phone
- format system partition
- install cm11 / cm11s
- install gapps
- factory reset your phone
- boot (no configuration)
- reboot
- configure and use
d4fseeker said:
Try these steps
- boot in recovery
- factory reset your phone
- format system partition
- install cm11 / cm11s
- install gapps
- factory reset your phone
- boot (no configuration)
- reboot
- configure and use
Click to expand...
Click to collapse
Hello friend try to do what you said i did through Cwm PhilZ Touch but continue to offer me the same error audiofx do not know what it is that one plus

Having issues with OPO adb

Hello everybody
Well, I have his issue. I tried to flash some new roms into the OPO yesterday and I had some issues with one, so I decided to flash other one, but when I wiped the things I also wiped the internal storage and I didnt know that that would erase my OS, now i'm trying to flash a rom but it wont let me with the bootloader because it says its locked, and if i try to unlock it using OPO toolking via ADB sideload the phone shows it requires ADB 1.0.32 which is the same that i have installed on my computer and if I try it using the bootloader option it just restarts and it keeps being locked. If I try to send a rom with the CMD on my pc it says "error: closed"
I have done some research and found some similar cases but not simiilar enough to have the same fixes
I have windows 10 and TWRP is 2.8.7.0
If anybody helps me that would be pretty useful
Thanks!
minor9719 said:
Hello everybody
Well, I have his issue. I tried to flash some new roms into the OPO yesterday and I had some issues with one, so I decided to flash other one, but when I wiped the things I also wiped the internal storage and I didnt know that that would erase my OS, now i'm trying to flash a rom but it wont let me with the bootloader because it says its locked, and if i try to unlock it using OPO toolking via ADB sideload the phone shows it requires ADB 1.0.32 which is the same that i have installed on my computer and if I try it using the bootloader option it just restarts and it keeps being locked. If I try to send a rom with the CMD on my pc it says "error: closed"
I have done some research and found some similar cases but not simiilar enough to have the same fixes
I have windows 10 and TWRP is 2.8.7.0
If anybody helps me that would be pretty useful
Thanks!
Click to expand...
Click to collapse
SOLUTIONS THAT MIGHT WORK
1) Use Fastboot instead of Sideload
Cmd
Go to Fastboot folder with CD
Boot into Fastboot , then type fastboot devices.
If you see the Oneplus One, then just download a random ROM and FLASH the ZIP
2) [Toolkit] Wug's Bacon Root Toolkit v1.0.3 [Updated 04/16/15] by WugFresh ---> LINK
Screenshots 1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Screenshot 2
3) [GUIDE] How to unbrick or make your phone 100% stock by vigneshvar1
This installing Android CM11s but you can afther that installing a other rom of your choise. --> LINK

[Bricked Nexus 5] can't mount /persisit ,/data; Currupt Partition; Flashing Failed

My rooted Nexus 5 has got bootloop issue because of faulty power button. It keeps restarting on its own. After replacing the power button with new One from LG Service center, now it stuck
at marshmellow boot screen, that boot keep running entire day untill battery died. LG Service center guys told me to replace the mother board. Since i was not convinced, i decided to make sure
if it is really required. My Nexus 5 has CWM recovery ver 6.0.4 with usb debugging on. Fastboot, adb everything is working. But if i tried to flash / wipe or mount i simply get error
can't mount /persist
cant mount /data
I tried following links to fix it-
https://forum.xda-developers.com/go...-unbrick-nexus-5-stucked-qualcomm-hs-t3043301
https://forum.xda-developers.com/go...orial-how-to-flash-factory-images-lg-t2713833
and some other first hand advice like run "Flash-all.bat" from stock rom, use WUG Toolkit to fix soft brick and flash stock rom or try flashing another custom recovery. But no matter what i try
CWM never get replaced and again same error. i was able to flash TWRP ( only untill reboot)and able to see folders under File Manager. But can't select Data, persist if try to wipe or mount from there.
One thing though, While using LG Flash tool my device never got detected in the tool even though i could see LG USB Serial Port under device manager in PC.
Please suggest if there is anything can be done to get it into working mode ,or motherborad replacement is the only way to go ahead.
You could try repartitioning device. try doing this:
https://forum.xda-developers.com/go...guide-repartition-nexus5-to-increase-t3509880
Actually resizing system partition also deletes userdata partition and it should work after recreating it. You have nothing to loose if it is already broken.
Try flashing the oldest stock ROM from the Google site. Make sure to flash userdata.img and perform a factoru wipe before booting the phone for the first time.
aciupapa said:
You could try repartitioning device. try doing this:
https://forum.xda-developers.com/go...guide-repartition-nexus5-to-increase-t3509880
Actually resizing system partition also deletes userdata partition and it should work after recreating it. You have nothing to loose if it is already broken.
Click to expand...
Click to collapse
Okay. Let me just try what you said. Will post the result
Edit1 -
I was not able to unmount /cache, /data .
On umount /cache it restart on its own and for other unmount /data and unmount /system invalid argument.
This is what happend (See image)--
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
audit13 said:
Try flashing the oldest stock ROM from the Google site. Make sure to flash userdata.img and perform a factoru wipe before booting the phone for the first time.
Click to expand...
Click to collapse
I am really sceptical if this will work. Since I have already tried flashing oldest rom of marshmallow (6.0.0).
Anyways, it won't take much time so will try to flash KitKat and let you know.
Edit -
Result was as expected
remote : failed to erase partition
remote : flash write failure
Any other Help ?? How to make sure if its really hard brick and not soft brick?
Sounds like the internal memory chip is damaged. I had one phone where I could not flash anything so I changed the motherboard and everything worked perfectly after the change.
I think I have a similar issue. Someone please help!

[Completed] [OP3] After couple ROM change test my phone is unusable, HELP PLEASE !

Hello everyone,
I currently have a Oneplus 3 which is completly unusable and I'm asking for your help to make it working again.
Until yesterday I used OxygenOs 4.0.2 ROM and it was about a moment I was thinking about changing my OS for the LineageOS ROM on Android 7.1.1 .I already did in the past this kind of changement on my nexus 5 for CM 13.0 .
So, I prepared all the files I needed (TWRP, ROM, Gapps etc...) and compared a lot of similar tutorial for being able to do it perfectly and being sure everything will work fine.
Firstly, I unlocked my bootloader though my PC and installed TWRP whithout any problems.
After that, I started the flash of the ROM and the Gapps zip packs. Everything worked and I launched the OS for checking if everything work.
I also wanted to ROOT my phone so I rebooted it and went to recovery again for flashing the ROOT zip from the LineageOS website and I picked the ARM64 one because I saw on internet it was the one needed.
After that, when I reboot the phone onto the system I have to make a "reconfiguration process" on this kind of way : Choose language --> Restore from zero --> Choose network --> Google account.
But, after filed my google account information I was normally able to receive a text for the double checked of my account but never it never came and the configuration is finally unsuccessfull because IMPOSSIBLE to skip the "network" or "google account" step.
I also tried to connect my phone on an other google account without the double checked option and it doesn't work too with this king of alert : " The process doesn't work due to an unknow error. Try again in 24 hours " .
I concluded that the problem come from the ROOT ZIP file, so I put my phone again in recovery and I do a " wipe / factory reset " for doing the exact same process from the begining (installing ROM) until root with this time the ARM ROOT ZIP.
Finally, I got the exact same result with the Google Account problem.
I choosed to do the complete process a third time with this time the SuperSu v2.79 ZIP file .... Result still the same.
Finally, I stoped trying to root my phone and I did again a "Wipe / factory reset" for just installing LineageOS and the Gapps pack. And I was suprised to see that the same problem continue to happen ! I wipe the phone and did again and again and again.
But, after all of that I choosed to do it on an other way. I saw on internet that " format data" through TWRP could be a solution for cleaning everything and start from zero. I did it and the process failed ....
From this point, I am with a phone which can't do anything and which saying that's impossible for it to "mount data" and other but I prefer to show that part on pictures. I think it'll be better for understanding (Excuse me for the pink because my HTC One M7 spare phone) :
Above there are the information that TWRP give me when I start it :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
On an other hand, the phone is recognize by the computer just as a multimedia device and it's impossible to write on its memory or just having access on it :
I hope I was the most clear as I could and hoping as well for an existing solution for my issue (in better case with LineageOS on it with root working ! But I don't want to ask to much !).
Also, I am french and I apologize for my english if it can be weak sometimes.
Thank you in advance. I'll allways available if you need further information.
PS: Since my bootloader is unlocked I have these both pages when the phone boot (Picture 1 and 2) which normally permit me to boot onto the system, recovery, fastboot etc .... (Picture 3) but in reality there is NOTHING happening and I always have to do it on the classic way if I want to boot on recovery or fastboot (hold power button + ..... etc...) :
Up
Daftnap said:
Up
Click to expand...
Click to collapse
Hi !
Please don`t bump up the threads , we will answer according to our availability , thank you
Here the thread you need to follow
https://forum.xda-developers.com/oneplus-3/how-to/guide-mega-unbrick-guide-hard-bricked-t3405700
Good luck !

Help root Samsung galaxy j7 prime

I tried installing the twrp recovery for it, and it did work but it had no access for the sd card nor the external sd card for some reason, but after some time it did work with an otg
So i had the supersu zip file on a flash card and tried installing it
It everything goes fine, until it finish and reboots to the system
Then this happens
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And no matter how many times i click that reset, it happens, it's only gone when reinstalling the stock firmware, but then I'll need to install the recovery again......., sometimes after installing the TWRP recovery, it goes into a restart loop so i need any help please
If you are the getting the following error, "Verification Failed, unable to restart your device. The integrity verification has failed. You need to reset you device to factory default settings. This will erase all your data" on your Android Smartphone don't worry because together we can resolve the issue.
Anna Phillips said:
If you are the getting the following error, "Verification Failed, unable to restart your device. The integrity verification has failed. You need to reset you device to factory default settings. This will erase all your data" on your Android Smartphone don't worry because together we can resolve the issue.
Click to expand...
Click to collapse
I did, in fact, i even reinstalled the stock image of the firmware because clicking "reset" simply doesn't work, also if i just flashed the TWRP without a root zip, it will go bootloop, i just wanna install a custom rom but looks like i need to root the device to do so, so i can pass the verification thing, but hey, thanks for caring.
MazenGomaa said:
I did, in fact, i even reinstalled the stock image of the firmware because clicking "reset" simply doesn't work, also if i just flashed the TWRP without a root zip, it will go bootloop, i just wanna install a custom rom but looks like i need to root the device to do so, so i can pass the verification thing, but hey, thanks for caring.
Click to expand...
Click to collapse
If you can somehow get TWRP use Magisk to root, supersu does not work on new devices.
How to Install Magisk on your Android Phone
Magisk is a powerful tool that can help you customize some aspects of your phone or even grant you root access. Here's how you can install it!
www.xda-developers.com

Categories

Resources