I tried installing the twrp recovery for it, and it did work but it had no access for the sd card nor the external sd card for some reason, but after some time it did work with an otg
So i had the supersu zip file on a flash card and tried installing it
It everything goes fine, until it finish and reboots to the system
Then this happens
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And no matter how many times i click that reset, it happens, it's only gone when reinstalling the stock firmware, but then I'll need to install the recovery again......., sometimes after installing the TWRP recovery, it goes into a restart loop so i need any help please
If you are the getting the following error, "Verification Failed, unable to restart your device. The integrity verification has failed. You need to reset you device to factory default settings. This will erase all your data" on your Android Smartphone don't worry because together we can resolve the issue.
Anna Phillips said:
If you are the getting the following error, "Verification Failed, unable to restart your device. The integrity verification has failed. You need to reset you device to factory default settings. This will erase all your data" on your Android Smartphone don't worry because together we can resolve the issue.
Click to expand...
Click to collapse
I did, in fact, i even reinstalled the stock image of the firmware because clicking "reset" simply doesn't work, also if i just flashed the TWRP without a root zip, it will go bootloop, i just wanna install a custom rom but looks like i need to root the device to do so, so i can pass the verification thing, but hey, thanks for caring.
MazenGomaa said:
I did, in fact, i even reinstalled the stock image of the firmware because clicking "reset" simply doesn't work, also if i just flashed the TWRP without a root zip, it will go bootloop, i just wanna install a custom rom but looks like i need to root the device to do so, so i can pass the verification thing, but hey, thanks for caring.
Click to expand...
Click to collapse
If you can somehow get TWRP use Magisk to root, supersu does not work on new devices.
How to Install Magisk on your Android Phone
Magisk is a powerful tool that can help you customize some aspects of your phone or even grant you root access. Here's how you can install it!
www.xda-developers.com
Related
i have followed all the steps using NRT to unlock boot-loader and root the phone.
Installed TWRT manager and flashed the recovery.
Now i am trying to flash CM12 for the first time and stuck with error message "can't install this package on top of incompatible data" during flashing .
downloaded the following flash zip from CM website: cm-12.1-20150901-SNAPSHOT-YOG4PAO237-hammerhead.zip (281.77 MB)
Can any one help me what needs to be done to proceed further.
i didnt wipe the data before. Now its working and closing the thread
I wiped everything on my phone via TWRP. Still getting this error!
This topic is old but in case someone else gets here I got a solution - Change /data partition filesystem to ext4 or other supported by ROM
mesaj said:
This topic is old but in case someone else gets here I got a solution - Change /data partition filesystem to ext4 or other supported by ROM
Click to expand...
Click to collapse
How did you do that?
dsarcinelli said:
How did you do that?
Click to expand...
Click to collapse
http://forum.xda-developers.com/nexus-4/help/guide-detailed-f2fs-manual-format-guide-t3264185
This guide might help, you do it in TWRP by going to Format > Advanced > select partition > Change filesystem > Ext4
Wiping data worked for me
2sumanth said:
i didnt wipe the data before. Now its working and closing the thread
Click to expand...
Click to collapse
In twrp, I had to fumble around to find advance wipe to clear data but worked like charm after that.
Thank you!
xiaomi note 4g dior
Let me tell my story,
My friend gave me an old xiaomi note 4g which was stuck at the MI icon on boot,
Luckily the phone did not lock boot-loader
So I use xiaomi flash rom to flash global room , it worked after i tried sometimes.
Then I booted to the phone, and other problem came, the phone was linked with an Mi Account , and my friend forgot everything about it
not email, no phone number
I did a search and they said the only way to bypass the MiAccount is using a Resurrection ROM or balallala
so I ended up with using
1. fastboot to install twrp
2. open twrp --> open adb sideload mode.
3. Open window command line and install Resurrection ROM though adb sideload
While installing rom though adb slideload , i got the same issue with topic
SO i cleared data and tried again,
IT WORKED , NO MORE ****ING MiAccount
THANK a lot
:fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi
Playing with my wife's Nexus 5, bootloader unlocked, rooted, and latest TWRP installed but when trying to flash from android 6.0.1 to Lineage, I'm getting an error 7 image shown I hope.....
Is this just because I haven't wiped the data first ? (I'm fairly sure but...)
I dont dare try 'cause if it's not that she'll kill me, so would like to be sure before I wipe all her data..
Thanks
Update, it was that I just wiped all except the SD and flashed, all is just great
Successfully Done
✓ bootloader unlock
✓ TWRP Recovery twrp-merlin-2.8.7-r7.img
All most try all super user
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
but after flash super user zip phone stop work at bootloader warning
same thing happen to me too..plz someone answer.
Prior to flashing supersu.zip, open twrp>advanced>terminal and enter (without quotes) enter the command
Code:
"echo SYSTEMLESS=true>>/data/.supersu"
Now SuperSU would install in systemless mode. The latest betas automatically install in systemless mode (I am using 2.74). Check if now it works.
Broadcasted from Zeta Reticuli
@Gravemind2015 is correct, that is the command needed to make it work... note that since you already tried flashing several SuperSU versions the old way, if it continues to be a problem you may need to reflash the factory images and verify booting prior to trying the mentioned systemless method.
mindjek07 said:
...after flash super user zip phone stop work at bootloader warning
Click to expand...
Click to collapse
I had the exact same issue on my 16 GB xt1540, running stock, fresh 6.0. Trying to root with SuperSU's (over TWRP), several versions up to 2.74, earlier versions down to 2.4 ish... I'd freeze at boot logo every time, after what appeared to successful installs.
After reading somewhere about someone else's luck, I gave 2.65 a go, a version I must not have tried (and one I notice is not on your screen shot), and it worked. I certainly didn't expect it to, and obviously it could be completely coincidental. I'm pretty sure, however, that I did nothing differently on that install to what I had done other times.
HTH
Buena suerte
Love you!!!
You pacified my pain.
Hi!
I picked up a Mate 8 from a local service provider and would love to flash a new ROM to get rid of the ugly stock one, but I am stuck when trying to flash anything from TWRP.
The phone boots fine, I unlocked the bootloader, and has TWRP Mate 8 version...I can't locate any files from the internal storage though. I understand this is due to the system being encrypted. I cant seem to get around that though. I tried the format data option, hit yes, then go back but that obviously has deleted what I had stored (the SU zip). I can't mount the SD either afterwards, to load it in recovery.
I tried using the Italian knife tool, and used the Root option, and option 3, but get an error: error: cannot load '.\rec\boot.img
I am not a pro on this so it might be something farely stupid. I would love if anyone could help me with this...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
--------------------------------
Edit:
I was able to solve myself. It was a rookie mistake. Perhaps the internal storage is encrypted, however I was able to flash SU using TWRP by inserting an external SD, which I had not done before. I was able to view contents from that location and did not need to use the Italian knife tool.
Hi there I am using iBall KitKat mobile is rooted but i am unable delete system apps and can't use link2sd showing error mount structure needs cleaning can anyone help
aceslivelong said:
Hi there I am using iBall KitKat mobile is rooted but i am unable delete system apps and can't use link2sd showing error mount structure needs cleaning can anyone help
Click to expand...
Click to collapse
Are you using SuperSU ??
To delete system apps, download system app uninstaller from play store and grand it superuser permission.
Sorry for bad grammar or lack details
Hello this night I got a notification from magisk to update magisk manager to v22. When I install it, it says magisk unsupported ....... (I forgot what it says) magisk will act as its not downloaded. So I tried to uninstall it and downgrade to 8.0.4 and it required me to reboot. After automatically reboot I'm stuck on fastboot. So I go to TWRP and try to uninstall magisk and I got error 1 and I tried to install and it did the same message. ERROR 1. can someone help me as fast as possible? It's 8:51 PM at the moment and I have school at 6 AM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Cocomug_ said:
Sorry for bad grammar or lack details
Hello this night I got a notification from magisk to update magisk manager to v22. When I install it, it says magisk unsupported ....... (I forgot what it says) magisk will act as its not downloaded. So I tried to uninstall it and downgrade to 8.0.4 and it required me to reboot. After automatically reboot I'm stuck on fastboot. So I go to TWRP and try to uninstall magisk and I got error 1 and I tried to install and it did the same message. ERROR 1. can someone help me as fast as possible? It's 8:51 PM at the moment and I have school at 6 AM
Click to expand...
Click to collapse
As the screenshot you provided implies, your boot partition seems corrupted.
Trying to figure out why can come at a later time, in the meantime try flashing a boot.img extracted from your current ROM (i.e a TWRP backup) or stock firmware (if you're on Stock). Using TWRP or fastboot should solve this issue.
Slim K said:
As the screenshot you provided implies, your boot partition seems corrupted.
Trying to figure out why can come at a later time, in the meantime try flashing a boot.img extracted from your current ROM (i.e a TWRP backup) or stock firmware (if you're on Stock). Using TWRP or fastboot should solve this issue.
Click to expand...
Click to collapse
Since I'm stuck on fastboot there's no way to extract it, so i just flashed the ROM zip file, and it worked. Thank You
Cocomug_ said:
Since I'm stuck on fastboot there's no way to extract it, so i just flashed the ROM zip file, and it worked. Thank You
Click to expand...
Click to collapse
how did you flashed it?
Hey there,
I have a problem with my A52 (SM-A525F/DS): It doesn't boot anymore, as it is stuck in the Download mode, showing the error message: "Reason recovery: Error verifying vbmeta image: invalid vbmeta header (6)"
Steps that lead to this:
LineageOS is installed. After installation of a software update, Magisk lost its root. So I tried to install an alternative recovery (TWRP) with Odin. Odin said "Pass", but now this error message occurs.
What can I do now to make the phone work again? Install the Stock ROM?
Would you please help me with this issue? Thank you so much.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Once again, you need to properly follow all the instructions listed on the thread: https://forum.xda-developers.com/t/recovery-official-twrp-3-7-for-galaxy-a52-4g-and-a72-4g.4405751/
Thank you and please excuse my stupidity.
@Simon1511, it worked, thanks again.
As this was inititally my problem: Is there a way to use LineageOS with Magisk and install Updates without losing the root access?
fheba said:
@Simon1511, it worked, thanks again.
As this was inititally my problem: Is there a way to use LineageOS with Magisk and install Updates without losing the root access?
Click to expand...
Click to collapse
Not automatically. You would have to reflash magisk every time you install an OTA.
deleted
Simon1511 said:
Not automatically. You would have to reflash magisk every time you install an OTA.
Click to expand...
Click to collapse
Thanks for your answer. I'm curious: Why doesn't it work anymore? It works with older phones like the Samsung A5 2017.
fheba said:
Thanks for your answer. I'm curious: Why doesn't it work anymore? It works with older phones like the Samsung A5 2017.
Click to expand...
Click to collapse
The problem is encryption. On the A5 2017 the Magisk re-install script would run after installing an OTA and would install itself again. But since encryption is enabled by default on newer phones (such as the A52) it doesn't work/behave correctly.
I'm fairly sure though it's an issue with Magisk and not with the ROM.