Related
Hello Friends,
I have tried to root my OPO running on cos 13 through TWRP. Unfortunately the rooting failed and the phone failed to start, It hangs in "cyanogen mod ready " boot animation screen. some how I have managed to flash the phone to stock OS and again updated it to COS 13.
Now I would like to root the phone , Please someone provide me the right SUPERSU link !
so that I can use it through TWRP.
P.S: The bootloader is already Unlocked.
Thanks in advance :good:
I'm dealing with the same problem, and I've had to flash the system partition back to 5.1.1 and then upgrade to 6.0.1 3 times. Each time I try installing different versions of SuperSU It hangs. Apparently you aren't supposed to install it, and enable root from the developer options, but I don't have any such option.
srink.007 said:
Hello Friends,
I have tried to root my OPO running on cos 13 through TWRP. Unfortunately the rooting failed and the phone failed to start, It hangs in "cyanogen mod ready " boot animation screen. some how I have managed to flash the phone to stock OS and again updated it to COS 13.
Now I would like to root the phone , Please someone provide me the right SUPERSU link !
so that I can use it through TWRP.
P.S: The bootloader is already Unlocked.
Thanks in advance :good:
Click to expand...
Click to collapse
squigley said:
I'm dealing with the same problem, and I've had to flash the system partition back to 5.1.1 and then upgrade to 6.0.1 3 times. Each time I try installing different versions of SuperSU It hangs. Apparently you aren't supposed to install it, and enable root from the developer options, but I don't have any such option.
Click to expand...
Click to collapse
You need to flash the beta sytemless SU, downloads are at the bottom of this post. Latest is BETA-SuperSU-v2.67-20160121175247.zip - http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
Ok, so I found a Beta version of SuperSU 2.7.1, and it seems to have worked. It was a different install process, saying it detected a "systemless root" or something, and it needed to patch the boot image. After that I appear to have root access again..
https://download.chainfire.eu/932/SuperSU/BETA-SuperSU-v2.71-20160331103524.zip
Edit: Whoops, guess I should have refreshed the page before posting.. What you said is correct Ken.
Thank you
kenboyles72 said:
You need to flash the beta sytemless SU, downloads are at the bottom of this post. Latest is BETA-SuperSU-v2.67-20160121175247.zip - http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
Click to expand...
Click to collapse
thanks a lot
DONE
http://imgur.com/hh3qkdxGuys Finally I have done it. Yes the phone is rooted now
1. Flash Stock COS 12
2.Update Stock COS 13 using stock recovery
3. Installed SUPERSU (chainfire) from Play Store
3. Install TWRP
4. Create NANDROID BACKUP (optional , I have created since I doubted the rooting process on cos 13)
5. Installed Latest STABLE SUPERSU ( V 2.65 as of now) {my last attempt with beta 2.71 failed }
6. Done
http://imgur.com/hh3qkdx
Hi All
I am on MIUI 10.3.1 Stock ROM and Recovery. I can download update, but when it is about to update, says something went wrong.
I tried to download the update zip file and tried to update using choose package, the same error.
I must tell you that in order to enable Camera2 API, I had installed TWRP_ZCX recovery temporarily and had flashed HAL3_Enable_MIUI_PIE a month before.
I am sure this error might have something to do with that recovery. Any help?
Will installing a stock recovery sort the error? If yes, where do I get it? But more importantly, will I lose all my data?
Download full recovery package and install
SunilSuni said:
Download full recovery package and install
Click to expand...
Click to collapse
Can you please explain slightly in detail? and Will I lose existing data?
My bootloader is unlocked
Download full recovery package and install
SunilSuni said:
Download full recovery package and install
Click to expand...
Click to collapse
I have got that far, any additional info like where do I get full recovery package etc would be much appreciated..
vu2pmc said:
I have got that far, any additional info like where do I get full recovery package etc would be much appreciated..
Click to expand...
Click to collapse
Mi community website
Download link for 10.3.2
http://bigota.d.miui.com/V10.3.2.0.PEIMIXM/miui_HMNote5Global_V10.3.2.0.PEIMIXM_7d750f3322_9.0.zip
SunilSuni said:
Mi community website
Download link for 10.3.2
http://bigota.d.miui.com/V10.3.2.0.PEIMIXM/miui_HMNote5Global_V10.3.2.0.PEIMIXM_7d750f3322_9.0.zip
Click to expand...
Click to collapse
Hi Sunil,
I tried this zip file in two ways, one is by using the system update and choosing package. It gave me the same error.
So i tried to use this file for Mi Flash tool, but says flash script not found.
Any more advice?
vu2pmc said:
Hi Sunil,
I tried this zip file in two ways, one is by using the system update and choosing package. It gave me the same error.
So i tried to use this file for Mi Flash tool, but says flash script not found.
Any more advice?
Click to expand...
Click to collapse
What's your device model ? Is it whyred or Vince ?? Doest it have dual camera or single camera ??
You need fastboot ROM package to flash in Mi Flash Tool
Link for fastboot ROM : http://bigota.d.miui.com/V10.3.2.0....XM_20190808.0000.00_9.0_global_3e234be300.tgz
ROM link shared here is for Redmi Note 5 Pro/Global
SunilSuni said:
What's your device model ? Is it whyred or Vince ?? Doest it have dual camera or single camera ??
You need fastboot ROM package to flash in Mi Flash Tool
Link for fastboot ROM : http://bigota.d.miui.com/V10.3.2.0....XM_20190808.0000.00_9.0_global_3e234be300.tgz
ROM link shared here is for Redmi Note 5 Pro/Global[/QUOTE
My device is an India version of Note 5 pro.
It's a dual camera version.
Model name mentioned is ME17S.
I'm downloading the fastboot Rom from the link you've mentioned..
I've the MIFLASH tool, now trying to see how I can keep my data intact..I got a few banking apps...
Click to expand...
Click to collapse
Hello,i think this is funny becquse igot the same error. But,I have locked bootloader no root, i was thinking about enabling camera2api ,but not tried it. Only flashed (via updater app) recovery roms (also tried dev. Versions of roms) , and in each rom version is the same error. So my OTA dont work anymore. Last update i must downloaded manually. Somthing ,somewhere is wrong.
Btw: (whyred global version phone,in EU)
Well, 10.3.2 fastboot also didnt flash properly. So I tried 10.3.1 Fastboot files using MI flash tool, after 10.3.1 zip file also failed. And 10.3.1 fastboot file flashed successfully and then it updated normally to 10.3.2. Guess my recovery image was corrupted for some reason.
After recently bricking my Oneplus 6 by trying to flash the latest TWRP on the latest Android 10 OTA from Oxygen Updater, I found a post from official TWRP explaining how root with a10 will take a while to implement due to changes that Google has made to their partitions.
So I guess for anyone trying this out on their own, be warned. You will probably end up bricking your device like I did and will probably end up having a bad time.
Please correct me if i'm wrong though, peace!
Edit: can confirm fastboot flash boot twrp-3.3.1-11-enchilada-Q-mauronofrio.img from the other popular post is working!
If you already have a working TWRP on OOS 9 you should be fine as long as you flash a working TWRP afterwards. Blu_spark TWRP 9.101 is compatible (please not 9.101 no earlier version will work).
Also don't use Magisk 20 only 20.1.
There is already a pre-patched version out there. You can fastboot flash it (as fastboot boot doesn't work). An easier way (without a pre-patched version) is currently being worked one as you pointed out already
just updated to a10
boot into twrp, flash new bluspark twrp
flash FULL ota a10 image
reflash twrp
reboot into twrp
boot into system
boot back to twrp
install magisk 20.1
a10, twrp and root working
Hi,
I am on 9.0.9 stable with root using magisk. Is it possible to update to android 10 without loosing data and root??
nightfury04 said:
Hi,
I am on 9.0.9 stable with root using magisk. Is it possible to update to android 10 without loosing data and root??
Click to expand...
Click to collapse
havent lost data and you can root again
Blu_spark twrp
could you please provide link for blu_spark twrp img, zip files that work with android 10?
akri1337 said:
havent lost data and you can root again
Click to expand...
Click to collapse
Did you uninstall Magisk in stable 9.0.9 before updating to andeoid 10?
nightfury04 said:
Did you uninstall Magisk in stable 9.0.9 before updating to andeoid 10?
Click to expand...
Click to collapse
nope
akri1337 said:
havent lost data and you can root again
Click to expand...
Click to collapse
akri1337 said:
nope
Click to expand...
Click to collapse
It would be of great help if you could provide link to working TWRP with android 10.
https://forum.xda-developers.com/oneplus-6/development/kernel-t3800965/page222
i used this one
akri1337 said:
https://forum.xda-developers.com/oneplus-6/development/kernel-t3800965/page222
i used this one
Click to expand...
Click to collapse
Which build did u use mate? R108 is not working with android 9, I tried flashing it using my older installed twrp.
It says unsupported android version. And in github r108 says only for android 10.
r108 is the kernel not twrp
https://github.com/engstk/android_device_oneplus_enchilada/releases/tag/v9.107
akri1337 said:
r108 is the kernel not twrp
https://github.com/engstk/android_device_oneplus_enchilada/releases/tag/v9.107
Click to expand...
Click to collapse
Thanks again mate.. I will give this one a try.
there is a problem with Magisk 20.1, after all flashes the system is booting ok with Magisk working but after I give first program root access and rebooting its stuck on bootloader and not booting to system.
nightfury04 said:
Thanks again mate.. I will give this one a try.
Click to expand...
Click to collapse
I can confirm that this is working for me. I successfully upgraded from Android 9, Oxygen OS 9.0.9 to Android 10, Oxygen OS 10. Steps that I followed :
1) Flashed new twrp from link in the above post by akri1337 using my previously installed twrp : bluspark 9.85.
2) Flashed Oxygen OS 10 full update and added to queue latest bluspark twrp which I flashed in step one as it would be overwritten by flashing the full OTA update.
3) Rebooted into recovery again to switch to active slot.
4) Flashed Magisk 20.2 to regain root.
This process successfully upgraded my Oneplus 6 without any data loss.
Please note that I disabled all magisk modules just to be safe before starting the upgrade process but didn't uninstall magisk. I was on Magisk 20.2 earlier.
Hope this helps everyone.
nightfury04 said:
I can confirm that this is working for me. I successfully upgraded from Android 9, Oxygen OS 9.0.9 to Android 10, Oxygen OS 10. Steps that I followed :
1) Flashed new twrp from link in the above post by akri1337 using my previously installed twrp : bluspark 9.85.
2) Flashed Oxygen OS 10 full update and added to queue latest bluspark twrp which I flashed in step one as it would be overwritten by flashing the full OTA update.
3) Rebooted into recovery again to switch to active slot.
4) Flashed Magisk 20.2 to regain root.
This process successfully upgraded my Oneplus 6 without any data loss.
Please note that I disabled all magisk modules just to be safe before starting the upgrade process but didn't uninstall magisk. I was on Magisk 20.2 earlier.
Hope this helps everyone.
Click to expand...
Click to collapse
Which magisk? Ver 20.1 ?
Why is it that I get an error when trying to flash the full OTA update using TWRP? Something about error 7 and not have a digest file. Is there a full OTA update file that everyone is using? I tried the signed full zip from here on XDA and the one from Oxygen Updater. I get the same error with both.
GunFishin said:
Why is it that I get an error when trying to flash the full OTA update using TWRP? Something about error 7 and not have a digest file. Is there a full OTA update file that everyone is using? I tried the signed full zip from here on XDA and the one from Oxygen Updater. I get the same error with both.
Click to expand...
Click to collapse
Had this error too and couldn't flash it with twrp, flashed successfully OTA file from oxygen -> Local upgrade
chetbiz said:
Had this error too and couldn't flash it with twrp, flashed successfully OTA file from oxygen -> Local upgrade
Click to expand...
Click to collapse
Still confused as to how everyone else can flash these zip files through TWRP and I cannot.
I'm currently Magisk rooted and have TWRP installed. Will I lose root and TWRP when updating through the local upgrade method?
GunFishin said:
Still confused as to how everyone else can flash these zip files through TWRP and I cannot.
I'm currently Magisk rooted and have TWRP installed. Will I lose root and TWRP when updating through the local upgrade method?
Click to expand...
Click to collapse
Yes, you will need to flash twrp with adb and going through the hole process of installing twrp and magisk, but for me its not worked well, after first boot to Android Q with magisk 20.1 and granting some apps root access when I rebooted the phone its not booting to system and going to bootloader, I think its related to some problem with magisk 20.1.
Hello,
Where I can download the full .zip official 10.3.0 to flash via TWRP Recovery?
Thx in advance.
E.C.
Enviado desde mi ONEPLUS A6000 mediante Tapatalk
Found it on the oneplus site, updated 12/24 it says
https://www.oneplus.com/support/softwareupgrade/details?code=PM1574156173727
This is the full zip to flash in twrp, but be sure to follow a guide to retain twrp. And I understand it's highly recommended to clean flash when moving to A10.
I have downloaded the full file and gone into TWRP to flash but I keep getting an error code 7. Mine is a T-mo converted to international version. I even wiped dalvik, system and data but still the same error. Can't figure this out.
Wrightperspective said:
I have downloaded the full file and gone into TWRP to flash but I keep getting an error code 7. Mine is a T-mo converted to international version. I even wiped dalvik, system and data but still the same error. Can't figure this out.
Click to expand...
Click to collapse
https://forum.xda-developers.com/on...ent/kernel-t3800965/post81251597#post81251597
Check this out. OOS 10.3 has a new partition that makes old TWRP versions incompatible. Developer eng.stk has released v9.108 which I have tried and found working. Prior to that, I was also getting error code 7.
xtartrackR said:
https://forum.xda-developers.com/on...ent/kernel-t3800965/post81251597#post81251597
Check this out. OOS 10.3 has a new partition that makes old TWRP versions incompatible. Developer eng.stk has released v9.108 which I have tried and found working. Prior to that, I was also getting error code 7.
Click to expand...
Click to collapse
I posted to the wrong forum. Anyone know a working TWRP for OnePlus 6T to upgrade to 10.3?
I had no luck, even with the newer TWRP version. OOS 10.3 is different somehow and TWRP doesn't like it. I just downloaded the ZIP file with the Oxygen Updater app, and then did a local upgrade via Settings -> System -> System Updates. Afterwards, you can re-install TWRP, which is still useful for things other than OOS upgrades for now.
Ericular said:
I had no luck, even with the newer TWRP version. OOS 10.3 is different somehow and TWRP doesn't like it. I just downloaded the ZIP file with the Oxygen Updater app, and then did a local upgrade via Settings -> System -> System Updates. Afterwards, you can re-install TWRP, which is still useful for things other than OOS upgrades for now.
Click to expand...
Click to collapse
yes there is a working twrp search online for "twrp mauronofrio"
I had a oneplus 6 and that updated to android 10 a while ago.
Now I recieved a oneplus 7 pro. But the problem is it will not update to android 10.
Tried a system update check, Said up to date.
Contacted oneplus they mentioned the local file upgrade
Downloaded that ZIP and tried again, it tells me system update installation failed.
I am rooted and have TWRP installed as well as magisk.
Considered flashing from TWRP, but since it is an official system update not sure how that would work.
Is this my best option or anyone have an idea on why it fails.?
Tried different suggestions, nothing seemed to work. Did not try to delete cache yet.
Hi
Did u try Tool All-in-one? Marvellous tool!
Envoyé de mon GM1913 en utilisant Tapatalk
eracet said:
I had a oneplus 6 and that updated to android 10 a while ago.
Now I recieved a oneplus 7 pro. But the problem is it will not update to android 10.
Tried a system update check, Said up to date.
Contacted oneplus they mentioned the local file upgrade
Downloaded that ZIP and tried again, it tells me system update installation failed.
I am rooted and have TWRP installed as well as magisk.
Considered flashing from TWRP, but since it is an official system update not sure how that would work.
Is this my best option or anyone have an idea on why it fails.?
Tried different suggestions, nothing seemed to work. Did not try to delete cache yet.
Click to expand...
Click to collapse
Hi,
you cant update to the latest 10 from 9 ... you need to do it incrementally
eracet said:
I had a oneplus 6 and that updated to android 10 a while ago.
Now I recieved a oneplus 7 pro. But the problem is it will not update to android 10.
Tried a system update check, Said up to date.
Contacted oneplus they mentioned the local file upgrade
Downloaded that ZIP and tried again, it tells me system update installation failed.
I am rooted and have TWRP installed as well as magisk.
Considered flashing from TWRP, but since it is an official system update not sure how that would work.
Is this my best option or anyone have an idea on why it fails.?
Tried different suggestions, nothing seemed to work. Did not try to delete cache yet.
Click to expand...
Click to collapse
You have not provided
any information about your phone:
1.) What version of OxygenOS do you currently have on your phone?
2.) What is your Phone Model?
[GUIDE] OnePlus 7 Pro [Region] (MODEL)
P.S.
From Android 9 to Android 10 (Official Stock ROM)
First with local upgrade go on OxygenOS 10.0.3
After this, upgrade to the latest version of OxygenOS
Local Upgrade
1.) Download the file OxygenOS 10.0.3 Global OnePlus 7 Pro 2.0 GB and copy it to the root of the internal memory
2.) Go to Settings> System> System Updates> Click the gear at the top right> Local Upgrade> Click on the appropriate installation package> Update
3.) After the update is completed, click Restart
4.) The update was successful.
Note If you do not see the firmware file, then check the file extension should be .zip (if you have .zip.jar just rename it by deleting .jar)
eracet said:
I am rooted and have TWRP installed as well as magisk.
Click to expand...
Click to collapse
Read this first (Procedure with TWRP and Magisk):
Upgraded to Open Beta 16, TWRP and Magisk working!!
@soka said:
Hi,
you cant update to the latest 10 from 9 ... you need to do it incrementally
Click to expand...
Click to collapse
Do you know the easiest way to that?
laikexpert said:
You have not provided
any information about your phone:
1.) What version of OxygenOS do you currently have on your phone?
2.) What is your Phone Model?
[GUIDE] OnePlus 7 Pro [Region] (MODEL)
P.S.
From Android 9 to Android 10 (Official Stock ROM)
First with local upgrade go on OxygenOS 10.0.3
After this, upgrade to the latest version of OxygenOS
Local Upgrade
1.) Download the file OxygenOS 10.0.3 Global OnePlus 7 Pro 2.0 GB and copy it to the root of the internal memory
2.) Go to Settings> System> System Updates> Click the gear at the top right> Local Upgrade> Click on the appropriate installation package> Update
3.) After the update is completed, click Restart
4.) The update was successful.
NoteIf you do not see the firmware file, then check the file extension should be .zip (if you have .zip.jar just rename it by deleting .jar)
Read this first (Procedure with TWRP and Magisk):
Upgraded to Open Beta 16, TWRP and Magisk working!!
Click to expand...
Click to collapse
Sorry did not see earlier.
Here is other information as requested.sorry if I missed anything.
GM1917 model
Oxygen OS 9.5.8.GM21AA
Region US
eracet said:
Sorry did not see earlier.
Here is other information as requested.sorry if I missed anything.
GM1917 model
Oxygen OS 9.5.8.GM21AA
Region US
Click to expand...
Click to collapse
Use Oxygen updater.
https://play.google.com/store/apps/details?id=com.arjanvlek.oxygenupdater
Or
https://forum.xda-developers.com/oneplus-7-pro/how-to/oneplus-7-pro-global-repo-oxygen-os-t3930585
CosmicInsight said:
Use Oxygen updater.
https://play.google.com/store/apps/details?id=com.arjanvlek.oxygenupdater
Or
https://forum.xda-developers.com/oneplus-7-pro/how-to/oneplus-7-pro-global-repo-oxygen-os-t3930585
Click to expand...
Click to collapse
Updater didnt work, but ended up booting from local updater after the file was downloaded.
Then I ended up doing local update with the update from oneplus latest.
Now I am working on redoing TWRP. It is sticking on fastboot mode after doing a fastboot boot twrp-3.3.1-4-guacamole.img
Just hope I didnt mess something up when I did the TWRP Magisk A/B retention script.
May try a different TWRP boot img
Newest TWRP worked fine.
ReInstalled Magisk.
All Data and apps are good.
Few minor issues but nothing to serious.
Thanks for all your help !!
eracet said:
Newest TWRP worked fine.
ReInstalled Magisk.
All Data and apps are good.
Few minor issues but nothing to serious.
Thanks for all your help !!
Click to expand...
Click to collapse
I'm glad everything ended well.