Hello,
Has anyone ever managed on surya to make otg work while charging at 1800mA or more and using an appropriate usb hub ? Tks.
Related
Canyou charge the galaxy s3 wirelessly and use otg at the same time? Do you think this would be possible on the nexus 4?
Has anyone tried this?
Aluzeros said:
Can you charge the galaxy s3 wirelessly and use otg at the same time? Has anyone tried this? Do you think this would be possible on the nexus 4?
Click to expand...
Click to collapse
Has anyone tried this?
I would also like to know if this is possible! (on any device)
Galaxy SIII OTG + chariging = NO
I've tried this recently because I needed to know myself.
It is NOT possible to do USB OTG and wireless charging at the same time. Wireless charging simply disables the USB port. And when something is connected to the USB port wireless charging is ignored. Even when only a OTG cable is connected (no mouse or USB stick) wireless charging is not possible.
Sad but true
Edit:
The same applies for the Galaxy Nexus phone with it's pogo-pins for charging. One excludes the other.
The only device that I've found and tested to be capable of USB OTG and charging at the same time is the Nexus 7. (charging trough dock, pogo-pins).
Another way to accomplish USB OTG + charging is to use a edited kernel.. About to try this on de Galaxy Nexus.
Hi,
I want to connect my NotePro to an external hard drive while charging it.
Do anyone knows how to do that?
wireless.tech.expert said:
Hi,
I want to connect my NotePro to an external hard drive while charging it.
Do anyone knows how to do that?
Click to expand...
Click to collapse
This: http://lavalink.com/products/samsun...bs-2/usb-otg-host-charge-adapter-tab4-tabpro/
Sent from my SM-P900 using Tapatalk
Thanks.
OTG + Charging cable
wireless.tech.expert said:
Hi,
I want to connect my NotePro to an external hard drive while charging it.
Do anyone knows how to do that?
Click to expand...
Click to collapse
OTG + Charging USB cable, find it on amazon: DECEC® Harrier Cable Portable USB 2.0 A Male to Micro B Data and OTG Cable USB Charge Cable
Dghan said:
OTG + Charging USB cable, find it on amazon: DECEC® Harrier Cable Portable USB 2.0 A Male to Micro B Data and OTG Cable USB Charge Cable
Click to expand...
Click to collapse
Unfortunately, this product actually does not allow the OP's device to simultaneously charge and act as the USB host device. The DECEC product has a switch for toggling between its two functions:
1. OTG Host Mode:Allows the OP's device to connect to USB peripheral (slave) devices and power them. This mode will also charge peripheral devices.2. Data Cable (Charge) Mode:Allows the OP's device to charge via an external power supply or via another USB host device (i.e., laptop).
Read the Q&A for this device on Amazon (go to Amazon and search for "Micro USB Male To USB Female Host OTG Cable + USB Power Cable Y Splitter"). The Q&A indicates that users have been able to use it for simultaneously charging a Nexus 7 and having the Nexus 7 act as a USB host device. One user mentioned that a custom kernel is needed to unlock this capability of the Nexus 7. They also recommended that a powered USB hub be used to ensure that the USB peripheral devices don't draw more power than the Nexus 7 can supply.
Current Limited to 1A
dodo99x said:
This: http://lavalink.com/products/samsun...bs-2/usb-otg-host-charge-adapter-tab4-tabpro/
Sent from my SM-P900 using Tapatalk
Click to expand...
Click to collapse
This adapter LIMITS THE CURRENT TO 1000mA as opposed to 1800mA using the 2.1A Samsung charger for TAB S 10.5. Presumably this would be the same for the Note 5 which comes with the higher capacity charger as well..
Considering to use a Huawei Mediapad X2 7.0 for my 2DIN car install, since the dimensions of the tablet are nearly identical to 2DIN,
Therefore I would like to know if the device supports USB OTG Host mode and charging the battery of the mediapad simultaneously using a certain Y cable?
Thanks, much appreciated if you can give it a try!
FrankZZ said:
Considering to use a Huawei Mediapad X2 7.0 for my 2DIN car install, since the dimensions of the tablet are nearly identical to 2DIN,
Therefore I would like to know if the device supports USB OTG Host mode and charging the battery of the mediapad simultaneously using a certain Y cable?
Thanks, much appreciated if you can give it a try!
Click to expand...
Click to collapse
Not sure about OTG Host cum charging combination because my understanding if you use OTG Host mode very likely you plug in a USB OTG thumb drive meaning you cannot charge at the same time.
However connecting the X2 micro USB port via standard USB cable to my laptop, I noticed I could use it as an USB device and it charges at the same time albeit not as as fast as a dedicated charging.
kpcheang2 said:
Not sure about OTG Host cum charging combination because my understanding if you use OTG Host mode very likely you plug in a USB OTG thumb drive meaning you cannot charge at the same time.
However connecting the X2 micro USB port via standard USB cable to my laptop, I noticed I could use it as an USB device and it charges at the same time albeit not as as fast as a dedicated charging.
Click to expand...
Click to collapse
Yes, but not OTG.
I can confirm that, on my side, using an OTG hub with a external power plug, no way to have the device charged by external power when in OTG mode.
It is OTG or Normal charge and functions via USB.
Seems Logical because the Phone is supposed to provide the power to its USB accessories in OTG. Just my HUB has a switch that provide power to those accessories instead of the phone Itself. May-I add that switching this power button on the HUB does not function until you had unplugged & replugged the Hub in the phone after switching between the two modes. I'm afraid of the survival of the Micro USB plug of my phone, on the long run, with all those plugin, unplugin actions !!!
It's possible but with anothere Device the Nexus 7 (2012/2013) with Timurs Kernel. What's the difference of this kernel to the normal kernel, so OTG with charging is working for this device,too.
Hello,
does someone know if there's a USB OTG Y Cable compatible to work with the Alldaymall A88T Pro so I can charge the Tablet and plug a PC mouse at the same time without an additional power supply?
The Tablet can be found here: https://www.amazon.com/Alldaymall-A88T-Pro-1920x1200-Lollipop/dp/B01MSMU8J0
Thanks
hi, i would like to use my xzp for octoprint until raspberrys are available again. The OTG function works but I can't charge and use otg at the same time with a Y-cable (aca mode?). I tested the stock and [ROM][13][OFFICIAL] NusantaraProject 5.2 (Toba) [14/11/2022]. Anyone an idea?
Well in theory it should be possible, with a adapter ("double dongle"), that has USB C to USB A to USB A
Like this one (link to amazon) (here's the link in case you can't click it:
https://www.amazon.com/-/de/dp/B07T...ix=usb+c+to+dual+usb+a+adapter,aps,187&sr=8-3 )
You could also search for something like this: usb c to dual usb a adapter
And you should get a few results.
I had one for my samsung (micro usb) and this kind of (double) dongle (adapter) worked.