Related
hi, i have a samsung intercept from vm. I used a SuperOneClick to delete some stock apps and somethings wrong my on-screen keyboard is completely gone and i keep getting this message saying something about the android process has unexpectedly ended please try again and some times it wont stop coming up and wont let me do anything. i deleted stock email app, some of the virgin mobile stuff I'm new to this as you can tell. please help and thank you
"the process com.google.process.gapps has stopped unexpectedly. please try again."
Rom and Recovery
I am assuming your phone is rooted so can you please tell me what ROM and recovery you are running?
its not rooted any more i used a temporary root i believe its on the stock rom i tried factory reset but it still the same without the apps and the missing keyboard, thanks for your reply
Adb?
jefe1026 said:
"the process com.google.process.gapps has stopped unexpectedly. please try again."
Click to expand...
Click to collapse
This tells me you basically deleted some system applications that support the Google applications like Gmail, Calendar, etc. Not a good thing lol. Next time when you are deleting "bloatware," don't delete anything that starts with com.google or com.system. These are the packages that help run android and google applications.
Incidently, Do you know what adb is? If so, have you ever used it?
ive seen adb when i ran superoneclick im tryin to learn all this i use to have an iphone and hackin that is pie compared to this cause there is so many android phones
Try Factory Reset
jefe1026 said:
ive seen adb when i ran superoneclick im tryin to learn all this i use to have an iphone and hackin that is pie compared to this cause there is so many android phones
Click to expand...
Click to collapse
Don't worry, the initial rooting process is the hardest part. After that, it only gets easier. Then you can put on whatever custom ROM you want and trust me, its awesome!
Anyway, I don't think you need to use adb juuust yet. Did you try to get to recovery mode yet and try to factory reset the phone?
To get to recovery mode on your Samsung Intercept, you hold, all these buttons at the same time, for a few seconds:
Volume Down, Call, and End buttons.
This will either bring you to recovery mode or have an option for recovery mode. Once there, there will be a setting to factory reset your phone. It will say something along the lines of "Wipe Data/Factory Reset" It won't delete anything on your SD card but wipes out all your apps and restores it to when you first used it.
yea i did that and the stuffs still missing : / im tryng to use the sw update to re install stock 2.1 but i keep getting "cannot open .bin file"
I had that problem too. What i did is connect my phone with samsung kies and that restored evrything back for me.
May that not help, try to flash it back with original firmware using odin
just search on this forum
This is the site that contains evry firmware of evry samsung phone:
samfirmware.com
you only have to register
i dont see my phone in the android section
I'm not having any luck with this... nothing seems to work
Don't Give Up!
jefe1026 said:
I'm not having any luck with this... nothing seems to work
Click to expand...
Click to collapse
Don't fret. You haven't bricked your phone yet.
Ok. I checked to see if any forum or site was hosting the original signed zip of the OS that came with your phone and I couldn't find any.
I have an idea though. Not sure if it might work but theoretically it should. Although your phone WAS rooted (aka. temporary root), its not anymore which means you don't have any custom firmware and are running stock.
IF you updated your phone to 2.2 froyo with the official update, then it should completely replace the OS and not only reverse the damage but upgrade it as well.
So you take the phone, put it into "Recovery Mode," and then use adb to push this zip (link below) on to the ROOT OF THE SDCARD. not anywhere else!
then in the recovery, select the "flash/update zip" option and select the new zip.
In theory, this should work. Cannot be sure so tread with caution!
Here is the link:
http://02ee24b.netsolhost.com/downloads/crowder/update.zip
This is the full article that explains how to root your phone after:
http://www.crawfordium.com/blog/?p=22
Best of Luck!!
Thanks I'll try it out
I got this "E:Error in /sdcard/update.zip (Status 7) Installation aborted. I tried formatting the sdcard and redoing it but i got same message again I also tried going into superoneclick and hitting unroot and it says its unrooted but i still get the (status 7) message :/
and the sw upgrade says cannont open .bin file
This might work!
I was reading through some Samsung Intercept forums for you and this looks promising:
http://forum.sdx-developers.com/int...e-to-froyo-2-2-with-no-baseband-modification/
Go through the first three steps and flash the stock 2.1 on to your phone and it should be restored to basic regular Android 2.1. It IS sprint's stock 2.1 for intercept not Virgin Mobile's but its ok because it doesn't replace Virgin Mobile's Baseband so its fine. Instead of seeing the Virgin Mobile boot up screen, it will show you a sprint boot up screen. No biggie.
Try it and tell me how it goes. remember to follow instructions carefully and to the tee.
OK NOW IM ON SPRINT 2.1 and my number works and now im going to try upgrading to 2.2 show i try doing it over the air or just do it manually?
i just did it manually now im going to try to root it
now how do i get superuser and all that good stuff with the roms i dont like the slapstick 1.4
Hello, I have a Motorola Defy which i have rooted and installed clockworkmod on it. I tried to install Cyanogen mod 7.1 from the website. The phone got to the boot screen where it continued to cycle through it thing and nothing more. I restarted the phone and now it gets stuck at the first screen where its says "google". I tried to enter recovery again (power + volume down) and clockworkmod is completely gone. I want to go back to the stock OS so it atleast works again. Ive tried using the update.zip option in the stock recovery mode but I keep getting an error "failed to verify whole-file signature" when using a signed copy of cyanogen mod. I also tried putting my backup in a zip with the same error. Ive even tried formatting my sd card. What do i do?
I was more or less where you are around June or so. I'm no expert by any means, but perhaps I can help. If memory serves I used a program called RSD Lite to flash it back to the stock unlocked rom I got from the "bl7 finally rooted" thread - if you unlocked a different way, I'd try to find your original rom.
Once you get to where you understand how to get back to stock it makes the whole thing a lot less scary, or it did for me. Once you get back up and running, try flashing Whiterabbit. I didn't have luck getting anything else to run, but that one worked the first time I tried it, and I'm very happy I persevered. Miles better than the stock OS.
Marvelicious75 said:
I was more or less where you are around June or so. I'm no expert by any means, but perhaps I can help. If memory serves I used a program called RSD Lite to flash it back to the stock unlocked rom I got from the "bl7 finally rooted" thread - if you unlocked a dirrerent way, I'd try to find your original rom.
Once you get to where you understand how to get back to stock it makes the whole thing a lot less scary, or it did for me. Once you get back up and running, try flashing Whiterabbit. I didn't have luck getting anything else to run, but that one worked the first time I tried it, and I'm very happy I persevered. Miles better than the stock OS.
Click to expand...
Click to collapse
I cant use the program as my phone doesnt get detected when connected to my pc.
OK, lets start with the basics, if I can remember it right... Have you used RSD Lite successfully before this? Drivers installed? Using bootloader mode? If any of this is unfamiliar go hit the beginner's thread - if you have done all this you may be beyond my help and in need of someone a bit more experienced.
Marvelicious75 said:
OK, lets start with the basics, if I can remember it right... Have you used RSD Lite successfully before this? Drivers installed? Using bootloader mode? If any of this is unfamiliar go hit the beginner's thread - if you have done all this you may be beyond my help and in need of someone a bit more experienced.
Click to expand...
Click to collapse
I fixed it, there were a different set of buttons to hold to get into boot loader. The default recovery was not over written as i thought (happened to all my other phones). Thank you very much for you help. It has been very much appreciated.
Glad to hear it.
Hey guys!
To start, I want to say what an amazing place XDA is and how much information and knowledge you can get from here and how awesome the moderators are. I don't think I could ever find another amazing and/or helpful community such as those found here! Thanks to all who have helped me out with my Android issues!
Now to my issue and I apologize ahead of time if there is another thread (or related thread) found in the forum.
As the title states, I have a 2013 Motorola Moto G XT1031 Boost Mobile device. I had upgraded it to Lollipop 5.0.2 or 5.1 when it came out (I can't remember which one it was) and I had then decided to root it. I can say that I believe I was successful in rooting the device because I was able to install Supersu and use RootChecker to verify the install. Everything was going okay until i decided to research and eventually install a custom recovery and attempt to install a custom ROM. Well, let's just say that the recovery install was a bust...
In doing my research for a custom recovery, I found that TWRP had a custom recovery for my phone and apparently for my firmware via TWRP's app on the Play Store. So, I searched for my device in their in-app search for a custom recovery, downloaded it and installed it from the app. Now, my gut told me that this probably wouldn't work and that I should probably be installing a custom recovery via CLI. Nope. I didn't do this. Instead, like I said, I installed a custom recovery from the app itself. That screwed things up for me. I have no idea if it was the install, but my phone began to act incredibly strange. When in the TWRP recovery, my screen had this line that would continuously scroll from top to bottom. It wasn't a completely solid line, but it was transparent, almost like an empty thermometer glass stick was going down the screen. It was weird and not normal. I figured the phone's software was partially broken. It only did this in the TWRP recovery. Nowhere else did this happen. It was slightly annoying.
Later on I decided to install a custom ROM. Again, I did the necessary research to find out if there were any ROMs available for my phone (using XDA of course and others) and found that there were a few out there. So, I downloaded one (wish I could remember which one) and attempted to install it...keyword there. After attempting the install, my phone would not boot. Like at all. Dead. So back to the drawing board I went to try and reverse the damage. Using XDA (ironically) and a plethora of other sites, I tried to resurrect my phone and bring it back to life. After countless hours of trying and trying and trying and more and more research, I just gave up. The phone is dead. Great. $170 spent on a phone to break it a year later.
It's been roughly 4-5 months since I have attempted to redo the process and after another minor attempt, somehow I was able to remove the root completely, including the custom recovery and ROM. I don't know what the heck I did, but it worked....sort of. The phone is now stuck in a bootloop on the logo and sometimes the "bootloader has been unlocked" screen when try and factory reset the phone from the default recovery. When trying to reinstall the stock firmware, I read everywhere that I need the phone to have USB-debugging set and to have this and that. I have this and that installed on my PC, but obviously cannot enable USB-debugging which is needed for ADB and fastboot to recognize my device.
So, my question for anyone who would like to help me out is this: what are my options? Is the phone recoverable? Is there any way I can get ADB/fastboot to see my device and finally install the stock firmware on the phone? I have the proper drivers installed and ADB/fastboot are on my PC. Any help would be amazing, even if you have to tell me to junk it.
blckdragn22 said:
When trying to reinstall the stock firmware, I read everywhere that I need the phone to have USB-debugging set
Click to expand...
Click to collapse
This is incorrect, where did you read that? To reinstall the stock firmware using fastboot, you must be able to boot to the bootloader menu only.
I heard this from a few websites actually, although I could never find a situational fix for my phone. I am trying to restore back to Lollipop without a custom recovery, because within the past hour I found out TWRP was never fully removed when I tried booting into recovery from the AP Fastboot menu when doing to power+vol down option. The TWRP logo shows for about 10 seconds and then the phone tries booting normally, showing the unlocked bootloader warning.
So, yes I can boot into the bootloader menu all day long with no problems. It's just an selection I make doesn't get me anywhere. My question I guess now is: how do I go about reinstalling stock firmware via the bootloader menu. I have Minimal ADB and Fastboot installed on my PC. If I need the full ADB, I can download that. And of course I'd need the firmware, too.
You can find stock firmware images in this thread, there's also a link to an installation guide there:
http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
_that said:
You can find stock firmware images in this thread, there's also a link to an installation guide there:
http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
Click to expand...
Click to collapse
This thread had the firmware I was looking for thank you. I believe I have the flashing stock firmware process down, I hope. I'l refer to the guide if I need help. Thank you so much!
_that said:
You can find stock firmware images in this thread, there's also a link to an installation guide there:
http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
Click to expand...
Click to collapse
I am trying to follow the steps listed here http://forum.xda-developers.com/showthread.php?t=2542219&page=35 and for some reason I cannot run any of the commands pertaining to the sparsechunks. This is what I get:
Is there anything you could tell me about that?
Edit: I was able to figure what the issue was when trying to write the sparsechunks. I had to insert a "." after 'sparsechunk' because that is how the file is named in the folder. However, now I am getting a new error, but it takes place on the phone screen. Every time I attempt to write a sparsechunk, it will initiate the process of doing so, but on the phone I'll get what appears to be an error saying, "Image is too large" in pink lettering. Why does this happen? Each sparsechunk file is at least 4MB less than the max-sparse-size according to the ADB and my phone, which is set to 256MB. Is there any way to change that?
blckdragn22 said:
However, now I am getting a new error, but it takes place on the phone screen. Every time I attempt to write a sparsechunk, it will initiate the process of doing so, but on the phone I'll get what appears to be an error saying, "Image is too large" in pink lettering. Why does this happen? Each sparsechunk file is at least 4MB less than the max-sparse-size according to the ADB and my phone, which is set to 256MB. Is there any way to change that?
Click to expand...
Click to collapse
Check which sparsechunk files you have and make sure you flash all of them in ascending order. If it still fails, copy/paste the contents of your command prompt window (no screenshots please).
_that said:
Check which sparsechunk files you have and make sure you flash all of them in ascending order. If it still fails, copy/paste the contents of your command prompt window (no screenshots please).
Click to expand...
Click to collapse
I will try that. There was a ...sparsechunks.0 as well apart from sparsechunks.1, sparsechunks.2 and sparsechunks.3. Shall I include that, too?
And adding the screenshot was an amateur mistake. My bad.
@_that this worked like a charm. Phone is 100% working ans usable now. Incredibly helpful. Thank you so much!
Hi everyone, I need some help if possible!
The situation : I have a huawei P40 ANA-NX9. I successfully install gms, makes updates, then have a problem with my google account wich force my to change my password. GMS was not working and see that I have to downgrade firmware to reinstall gms.
I follow this good tutorial : https://www.youtube.com/watch?v=c1M4amoGvtA&t=74s&ab_channel=SystemHacks
I can't find any "approuved" firmware as I have this one : ANA-LGRP4-OVS 10.1.0.182
So I try to install ANA-LGRP4-OVS1B116-log (11.0.0.116) and now my phone don't boot, it show EMUI recovery. :crying:
I try to full reset, wipe cache, nothing work.
I try to re-install via usb-otg firmwares from here : https://androidhost.ru/search.html searching for "ANA-n29" none of the 3 work
I try to recover with hisuite, don't work.
Maybe someone know better how to restore the phone, with or without gms just make it work.
Maybe someone know that the phone is bricked forever so I can stop trying and trying...
thanks a lot !
JB
Hi i ever read somewhere before about this happening to one of the p40 pro user, something when wrong after he downgraded his phone, his imei shows null making the phone hangs at recovery page or keeps on bootlooping every 30sec to 2mins. (there's no other way to fix this ATM, only to try luck by bringing it to service center to fix it, if your phone is still covered by warranty)
jb_82 said:
Hi everyone, I need some help if possible!
The situation : I have a huawei P40 ANA-NX9. I successfully install gms, makes updates, then have a problem with my google account wich force my to change my password. GMS was not working and see that I have to downgrade firmware to reinstall gms.
I follow this good tutorial : https://www.youtube.com/watch?v=c1M4amoGvtA&t=74s&ab_channel=SystemHacks
I can't find any "approuved" firmware as I have this one : ANA-LGRP4-OVS 10.1.0.182
So I try to install ANA-LGRP4-OVS1B116-log (11.0.0.116) and now my phone don't boot, it show EMUI recovery. :crying:
I try to full reset, wipe cache, nothing work.
I try to re-install via usb-otg firmwares from here : https://androidhost.ru/search.html searching for "ANA-n29" none of the 3 work
I try to recover with hisuite, don't work.
Maybe someone know better how to restore the phone, with or without gms just make it work.
Maybe someone know that the phone is bricked forever so I can stop trying and trying...
thanks a lot !
JB
Click to expand...
Click to collapse
Did you find a solution to this? I`m trying to downgrade my ANA-LGRP4 aswell
mrteyssere said:
Did you find a solution to this? I`m trying to downgrade my ANA-LGRP4 aswell
Click to expand...
Click to collapse
Hi,
No, still bricked.
I think the problem is I update with emui 11 and it don't want to downgrade to 10.
My only hope for now, is the release of emui 11 on the huawei P40 so maybe I will be abble to use the hisuite recovery.
https://www.huaweiupdate.com/huawei-emui-11-official-roadmap-released-for-all-countries/
Seems like it will be released on December...
jb_82 said:
Hi,
No, still bricked.
I think the problem is I update with emui 11 and it don't want to downgrade to 10.
My only hope for now, is the release of emui 11 on the huawei P40 so maybe I will be abble to use the hisuite recovery.
https://www.huaweiupdate.com/huawei-emui-11-official-roadmap-released-for-all-countries/
Seems like it will be released on December...
Click to expand...
Click to collapse
how did you even get that firmware to flash? i have literally the same model and my phone tells me that its incompatible .
ooh and to fix your phone is easy, just use the eRecovery option (done by holding up and power until the huawei boot sign comes on, then select update mode, followed be eRecovery.)
Lizzo said:
how did you even get that firmware to flash? i have literally the same model and my phone tells me that its incompatible .
ooh and to fix your phone is easy, just use the eRecovery option (done by holding up and power until the huawei boot sign comes on, then select update mode, followed be eRecovery.)
Click to expand...
Click to collapse
Hi,
I flash it with Hisuite & a proxy. It show an alert like "are you sure?" and I click "yes" ...
Thanks for helping, I already try the erecovery but It does not work.
I try "update & recover system" with wifi, it show : "retrieving package information..." > Get package info failed
And I try Factory reset, it goes from 0 to 100 % , then I click wipe cache, it restart, show huawei logo and show erecovery again, i click restart > show huawei logo > ... > erecovery again ...
I'm stuck on erecovery, it never start..
Do you test the dload method?
i think dload will work , but we need to have god firmware , im the same situation. ;(
Hi guys, anyone found any solution? I f..ed my phone today. I dont know where to download fw from, nothing worked, flash from USB didnt work, nothing works. Unbelievable,even Sony offers a recovery option.
I have the same problem.
Spend already a week and haven't found a solution.
I believe that SigmaKey or Chimera software can help with it but it needs to be checked.
i installed the wrong version (els-lgrp4-ovs) instead of (els-lgrp6-ovs)..FFFuu.. its bricked. keeps on restarting. if anyone knows how to fix it, let me know.
Now it seems i have to call the after sales...
grand_deluxe said:
i installed the wrong version (els-lgrp4-ovs) instead of (els-lgrp6-ovs)..FFFuu.. its bricked. keeps on restarting. if anyone knows how to fix it, let me know.
Now it seems i have to call the after sales...
Click to expand...
Click to collapse
Me too, I'm waiting for Solutions.
jb_82 said:
Hi,
I flash it with Hisuite & a proxy. It show an alert like "are you sure?" and I click "yes" ...
Thanks for helping, I already try the erecovery but It does not work.
I try "update & recover system" with wifi, it show : "retrieving package information..." > Get package info failed
And I try Factory reset, it goes from 0 to 100 % , then I click wipe cache, it restart, show huawei logo and show erecovery again, i click restart > show huawei logo > ... > erecovery again ...
I'm stuck on erecovery, it never start..
Click to expand...
Click to collapse
My Situation. Waiting for Solutions
Try this original rom. I have made my downgrade with this rom.
It's for ANA-NX9 like yours.
Huawei P40 ANA-NX9 ANA-N29 hw eu HLRCF Anna-N29CB 10.1.0.114(C432E6R5P2) Firmware EMUI10.1.0 05016PSQ_By(www.dztechphone.com).zip | by DzTechphone for Generic Device/Other
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Put dload on a pen and try to recovery update with it.
Guys I failed my downgrade and now my phone is dead as in muerto! It cannot even go to Bootloader nor Fastboot. Only Someone with Sigmakey or simillar and a lot of experience can help now, if its possible to help me in general
Did you all find a solution for this? Also, just curious, why would you want to try to downgrade the software?
I have the same problem with a p40 lite JNY-LX1 after I used OTG to downgrade phone went into bricked mode, any useful tips will be much appreciated to help remedy this situation
Phone firmware was on 10.1.0.338 or 335 not sure but that version I'm reading multiple posts about test point mode not working after July patch I'm hoping someone smart out there will have the skills to bring this dead junk back to life at some point in time
Exactly the same problem here. Today my p40 lite JNY-LX1 bricked after I tried to downgrade from 10.1.0.336 to an earliest version.Let's hope a solution will be available any time soon
I took my device back to store and lied to them about having wifi problems when I was updating it so they gave me a new device after a week
so the situation is like , I woke up and saw that my phone's home screen is freeze so, I thought of restarting it , but after I restart my phone, a "hello" screen shows(I hate it) and then I choose language then Country then Wi-Fi, then the screen shows "checking for updates" and after 2-3 minutes It automatically terminates me to the previous page and the process continues in a loop. I tried it restarting a lot of time and also tried the recovery mode but nothing changed.
My device : Realme X7 5G, 3.0UI.
I don't have a backup of my data, so I don't want to loose it, and I didn't unlocked my phone's bootloader, is there any other way, pls help me,
Please someone help me, pls
https://www.getdroidtips.com/realme-x7-rmx2175-stock-rom-file/ Is where you can find the stock firmware. because to fix this you might need to re-flash the stock firmware. and https://spflashtool.com/ is the flashing tool you'll need. follow the instructions in the getdroidtips website to flash it. EDIT: Keep in mind the files are 3 gigabytes so make sure you have enough space.
Creepergames360 said:
https://www.getdroidtips.com/realme-x7-rmx2175-stock-rom-file/ Is where you can find the stock firmware. because to fix this you might need to re-flash the stock firmware. and https://spflashtool.com/ is the flashing tool you'll need. follow the instructions in the getdroidtips website to flash it. EDIT: Keep in mind the files are 3 gigabytes so make sure you have enough space.
Click to expand...
Click to collapse
hey there, thank you for replying, I don't have a backup of my data, so I don't want to loose it, and I didn't unlocked my phone's bootloader, is there any other way, pls help me
sparks877 said:
hey there, thank you for replying, I don't have a backup of my data, so I don't want to loose it, and I didn't unlocked my phone's bootloader, is there any other way, pls help me
Click to expand...
Click to collapse
Unfortunately that's all I could think of to help you. I am very VERY sorry. We will just have to wait for someone else to reply to this thread.