Download DooMLoRD_v1_Xperia-2011-ICS-ROOT-emu-busybox-su.rar (use search button).
Enable UNKNOWN SOURCES and Connect your a13 tab in USB DEBUGGING mode, then run runme.bat file from the package.
sit back read the on screen instructions
the device will reboot a couple of times
when the script finishes it will say "ALL DONE" Your tablet is rooted.
king001001 said:
Download DooMLoRD_v1_Xperia-2011-ICS-ROOT-emu-busybox-su.rar (use search button).
Enable UNKNOWN SOURCES and Connect your a13 tab in USB DEBUGGING mode, then run runme.bat file from the package.
sit back read the on screen instructions
the device will reboot a couple of times
when the script finishes it will say "ALL DONE" Your tablet is rooted.
Click to expand...
Click to collapse
VERY interesting! Do you have any links for that rar?
Do you know if everything works fine after the root? (wifi, touchscreen, etc etc)?
king001001 said:
Download DooMLoRD_v1_Xperia-2011-ICS-ROOT-emu-busybox-su.rar (use search button).
Enable UNKNOWN SOURCES and Connect your a13 tab in USB DEBUGGING mode, then run runme.bat file from the package.
sit back read the on screen instructions
the device will reboot a couple of times
when the script finishes it will say "ALL DONE" Your tablet is rooted.
Click to expand...
Click to collapse
didn't work... stuck on "WAITING FOR DEVICE" :c
Evverything works perfectly. It just root you device nothing else. Make sure its an a13.
A13 4.0.4 root
Everything works perfectly. Just make sure its an A13 and usb debugging enabled.
sorry, may I ask what an A13 is? as I stuck on "Waiting For Device"
TrungTran10 said:
sorry, may I ask what an A13 is? as I stuck on "Waiting For Device"
Click to expand...
Click to collapse
A13 is an ARM Cortex-A8 processor based SoC, noramally used in low cost android tablets.
TrungTran10 said:
sorry, may I ask what an A13 is? as I stuck on "Waiting For Device"
Click to expand...
Click to collapse
Check your USB DEBUGGING mode if enabled. Or reboot your PC, check your USB DEBUGGING mode on your Tablet then run the BAT file. That should recognize your device.
Thanks ! worked great!
everyone~~ make sure you have ADB drivers installed !!
you can download it from here:
http://forum.xda-developers.com/showthread.php?t=1601038
Danke schoen for the tutorial! Works on my A13 device just fine.
Could this tab support custom roms? Is there a way to get google play to work ?
Sent from my SGH-T989 using xda premium
I have a mid M9000 and when I run this is says daemon started but then just sits there??? How long should I wait for that. The tablet does nothing?
JUNEBUG-1 said:
Could this tab support custom roms? Is there a way to get google play to work ?
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Custom roms not recommented in chinese tabs because they use different input output devices .
pabhouse said:
I have a mid M9000 and when I run this is says daemon started but then just sits there??? How long should I wait for that. The tablet does nothing?
Click to expand...
Click to collapse
Make sure adb drivers are installed.
how to root a13 a10 allwinner
Google Allwinners tool box zip on your computer
Step 2
Enable usb debuging
Step 3
Wait
---------- Post added at 09:16 AM ---------- Previous post was at 09:08 AM ----------
? I have some old android phone is there any way to. Install it to my a13 softwinners tablet
I wunt to do this for use of bluetooth gps more storage est the phone I wunt to use is the sunsung infues att
Or my samsung g 1 tmobile
already root my Android GPS tablet..
brand: U-ROUTE
model: S6
chinese GPS
hi guys, i bought an allwinner a13 7" tablet online that is stuck in a boot loop. im new to this stuff but i have tried to get into the recovery by holding vol up + vol down + power like everywhere says to but all i get is a pic of the android symbol down with an exclamination mark coming from his guts. i am led to believe that this means there is no recovery on it. the specs of the tablet are:
model: yeahpad pillbox7
7.0" Capacitive multiTouch Tablet PC Resolution 800 * 480 pixels, 16:9
All Winners A13 Cortex A8 .
CPU Boxchip A13 1.5GHz .
Memory 512MB DDR2 ROM
HARD DISK 4GB
Camera 1.3 Mega Pixels
Wi-Fi 802.11 b/g/n supported 3G External 3G (USB 3G Modem)
supported Card type Micro SD/TF Card (Maximum 32GB supported)
USB/3.5mm Headphone
how do i put a recovery on it in order to reset it to stock, or at least get past the boot loop?
any help is appreciated, thanks in advance
RE
666vi6696 said:
hi guys, i bought an allwinner a13 7" tablet online that is stuck in a boot loop. im new to this stuff but i have tried to get into the recovery by holding vol up + vol down + power like everywhere says to but all i get is a pic of the android symbol down with an exclamination mark coming from his guts. i am led to believe that this means there is no recovery on it. the specs of the tablet are:
model: yeahpad pillbox7
7.0" Capacitive multiTouch Tablet PC Resolution 800 * 480 pixels, 16:9
All Winners A13 Cortex A8 .
CPU Boxchip A13 1.5GHz .
Memory 512MB DDR2 ROM
HARD DISK 4GB
Camera 1.3 Mega Pixels
Wi-Fi 802.11 b/g/n supported 3G External 3G (USB 3G Modem)
supported Card type Micro SD/TF Card (Maximum 32GB supported)
USB/3.5mm Headphone
how do i put a recovery on it in order to reset it to stock, or at least get past the boot loop?
any help is appreciated, thanks in advance
Click to expand...
Click to collapse
Okay, first question is whether or not you are able to access the battery for your device? If so sometimes its as simple as removing the battery and then rebooting after 30-60 seconds. If not you will need the drivers for your device and will need to access the device via adb (there are several good forums on here to explain how to use adb). But you may be able to install a recovery via adb push.
---------- Post added at 07:07 PM ---------- Previous post was at 06:58 PM ----------
So it is possible to do this however you will need to download the android SDK to access adb and find a custom recovery.IMG for your device. Hope this helps you. If you need anything else feel free to ask.
O
android_geek_0507 said:
Okay, first question is whether or not you are able to access the battery for your device? If so sometimes its as simple as removing the battery and then rebooting after 30-60 seconds. If not you will need the drivers for your device and will need to access the device via adb (there are several good forums on here to explain how to use adb). But you may be able to install a recovery via adb push.
---------- Post added at 07:07 PM ---------- Previous post was at 06:58 PM ----------
So it is possible to do this however you will need to download the android SDK to access adb and find a custom recovery.IMG for your device. Hope this helps you. If you need anything else feel free to ask.
O
Click to expand...
Click to collapse
not with ease, the battery is glued to the screen and i risk damaging the screen getting it out.
if i can put a recovery on the tablet i will be ok, my wildfire s was rooted when i purchased it and i have flashed a few different roms on it using the recovery, so that much i can do but i cant find the right recovery for the tablet to factory reset it,
i have never herd of adb, is that a program for P.C? to be honest, im new to putting a recovery on a device, sorry for being such a noob and thanks, if someone can help me find the right IMG i should be able to do the rest, but i cant find the correct IMG
I'll look for a recovery image for you... ADB is the Android Debug Bridge and comes.included in the Android SDK.... Its a way to perform operations on your device via a PC.... There are several very good tutorials on here regarding how to push files and flash ROMs and recoveries via ADB to your device.... If I can find a recovery for your device I will let you know on here
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
hello, i think this forum is my last hope, i have a tablet and i've been searched the correct rom for it, but is not very commun in the market (DOPO), and i am a very noob in this kind of topics, i tried the recovery mode but now shows me a box that says: Android is upgrading, Optimizing app 1 of 39, but never pass the no1, it stays there for hours without anything happening, i guess, i only have the choice to flash the tablet with a rom, but i will apreciate if you guys help me how to find the right way to reinstall my android OS,or find the right OS for my tablet. please, help me
My Tablet:
DOPO Double Power
Model: GS-918
9" multitouch display
8GB Memory
Android 4.1.1 Jelly Bean operating system
1.5GHz Amlogic Cortex A9 dual-core processor
1GB system memory
800 x 480 resolution
sdesignz said:
hello, i think this forum is my last hope, i have a tablet and i've been searched the correct rom for it, but is not very commun in the market (DOPO), and i am a very noob in this kind of topics, i tried the recovery mode but now shows me a box that says: Android is upgrading, Optimizing app 1 of 39, but never pass the no1, it stays there for hours without anything happening, i guess, i only have the choice to flash the tablet with a rom, but i will apreciate if you guys help me how to find the right way to reinstall my android OS,or find the right OS for my tablet. please, help me
My Tablet:
DOPO Double Power
Model: GS-918
9" multitouch display
8GB Memory
Android 4.1.1 Jelly Bean operating system
1.5GHz Amlogic Cortex A9 dual-core processor
1GB system memory
800 x 480 resolution
Click to expand...
Click to collapse
Download This File
https://docs.google.com/file/d/0B8YnQA1FX-_yUU1ERXh1TjNUbnc/edit?usp=sharing
Click to expand...
Click to collapse
Install Cwm On your tab with mtk droid tools (search for it on the internet)
Boot into recovery mode....
The file you downloaded must be in your sd card....
Select apply update from sd card...
Choose the zip file....
Click yes....
The phone will boot normally....
do everything at your own risk... don't forget to make a backup of your tab with mtkdroid tools..... I am not responsible for any harm caused to your device
Click to expand...
Click to collapse
N'ayam Amarsh'e said:
Download This File
Install Cwm On your tab with mtk droid tools (search for it on the internet)
Boot into recovery mode....
The file you downloaded must be in your sd card....
Select apply update from sd card...
Choose the zip file....
Click yes....
The phone will boot normally....
Click to expand...
Click to collapse
wow thank you for the quick reply!
i am trying to do the back up to my rom but the MTKdroidTools does not recognize my device when i plug in with the usb cable to the pc
EDIT: ok i run the the .zip file named dopo7088stk and this is what it says:
install/sdcard...
finding update package...
opening update package...
verifying update package...
installation aborted.
sdesignz said:
wow thank you for the quick reply!
i am trying to do the back up to my rom but the MTKdroidTools does not recognize my device when i plug in with the usb cable to the pc
Click to expand...
Click to collapse
Mtkdroid tools only works with mediatek devices (with a mediatek chip eg mt6577, mt6589 etc) so will not work with your device
What actually is wrong with your tablet?
sdesignz said:
wow thank you for the quick reply!
i am trying to do the back up to my rom but the MTKdroidTools does not recognize my device when i plug in with the usb cable to the pc
EDIT: ok i run the the .zip file named dopo7088stk and this is what it says:
install/sdcard...
finding update package...
opening update package...
verifying update package...
installation aborted.
Click to expand...
Click to collapse
Sorry Then i can't help... But you can try to do factory reset from CWM REcovery... If this helps then you can boot normally.. If this too doesn't works then you will have to give it to SVC.....
Sorry Then i can't help... But you can try to do factory reset from CWM REcovery... If this helps then you can boot normally.. If this too doesn't works then you will have to give it to SVC.....
Click to expand...
Click to collapse
but to do a cwm recovery i need the tablet drivers isn't it?
and i don't have them :/
oscarblue48 said:
Mtkdroid tools only works with mediatek devices (with a mediatek chip eg mt6577, mt6589 etc) so will not work with your device
What actually is wrong with your tablet?
Click to expand...
Click to collapse
it freezes in the operating system start logo, or shows me a box that says: Android is upgrading, Optimizing app 1 of 39, but never pass the 1, it stays there for hours without anything happening. I already tried using the system recovery but it did not work, i tried with diferent roms but nothing :/, i don't have the warranty paper, i guess i'm ****ed :C
sdesignz said:
but to do a cwm recovery i need the tablet drivers isn't it?
and i don't have them :/
it freezes in the operating system start logo, or shows me a box that says: Android is upgrading, Optimizing app 1 of 39, but never pass the 1, it stays there for hours without anything happening. I already tried using the system recovery but it did not work, i tried with diferent roms but nothing :/, i don't have the warranty paper, i guess i'm ****ed :C
Click to expand...
Click to collapse
Can you get into the recovery menu and do factory reset or anything else??
I guess you've tried resetting via the reset button?
There doesn't appear to be a stock rom available for the GS-918 on the Dopo website, have you contacted them to see if they are able to help?
You could try leaving the tablet on when it freezes until the battery runs right down and it turns off, then put it on charge and try it again, not much else I can think of at the moment
oscarblue48 said:
Can you get into the recovery menu and do factory reset or anything else??
I guess you've tried resetting via the reset button?
There doesn't appear to be a stock rom available for the GS-918 on the Dopo website, have you contacted them to see if they are able to help?
You could try leaving the tablet on when it freezes until the battery runs right down and it turns off, then put it on charge and try it again, not much else I can think of at the moment
Click to expand...
Click to collapse
yes i can do everything but it doesn't fix anything :C
and yes, i've tried the ressetting via reset button.
i can swear you there is no dopo GS-918 model drivers or rom in the whole web u.u
I contacted them but they only told me about the recovery menu, and i send them a question but they haven't answered me yet.
((((
now the pc recognizes the tablet via usb, well, it recognized first like vid_1f3a_pid_efe8_driver, then it disappeared and recognized a M3-CHIP driver but with errors (The drivers for this device are not installed. (Code 28)
There are no compatible drivers for this device.
To find a driver for this device, click Update Driver, blabla.)
so i think i need to find the M3-CHIP driver isn't?
EDIT:
I let the battery ran out, and now shows me the box that says: Android is upgrading, Optimizing app 1,2,3,4,5,6,7 of 39, but never pass the 7 now, then i restart the tablet againt, and say: optimizing app 20 of 23, but it freezes,then i restart the tablet... againt, and say: optimizing app 1 of 7, i restart again the tablet, and then it freezes in the first logo forever, the end :C
So, i think one of those last applications is creating the conflict
EDIT 2:
so, now im stuck in the system recovery, i choose reboot system now, and again, i am in System recovery , even if i only press the + volume or -, with the tablet off, it boots automaticly the system recovery :S
sdesignz said:
yes i can do everything but it doesn't fix anything :C
and yes, i've tried the ressetting via reset button.
i can swear you there is no dopo GS-918 model drivers or rom in the whole web u.u
I contacted them but they only told me about the recovery menu, and i send them a question but they haven't answered me yet.
((((
now the pc recognizes the tablet via usb, well, it recognized first like vid_1f3a_pid_efe8_driver, then it disappeared and recognized a M3-CHIP driver but with errors (The drivers for this device are not installed. (Code 28)
There are no compatible drivers for this device.
To find a driver for this device, click Update Driver, blabla.)
so i think i need to find the M3-CHIP driver isn't?
EDIT:
I let the battery ran out, and now shows me the box that says: Android is upgrading, Optimizing app 1,2,3,4,5,6,7 of 39, but never pass the 7 now, then i restart the tablet againt, and say: optimizing app 20 of 23, but it freezes,then i restart the tablet... againt, and say: optimizing app 1 of 7, i restart again the tablet, and then it freezes in the first logo forever, the end :C
So, i think one of those last applications is creating the conflict
EDIT 2:
so, now im stuck in the system recovery, i choose reboot system now, and again, i am in System recovery , even if i only press the + volume or -, with the tablet off, it boots automaticly the system recovery :S
Click to expand...
Click to collapse
I think its banjaxed mate, I think your only hope is if the manufacturer is willing to help you, there are no files available anywhere that I can find, the only thing that might have fixed it is a factory reset, and I guess that is not working from your recovery menu?
Is it out of the question to return it to Dopo?
I suppose you could try running the battery right down again, then leaving it for a while and then restarting again, and keep doing that in the hope that it fires up as its supposed to, but to be honest I have my doubts that it will.
Sorry I cant be of any more help.
oscarblue48 said:
I think its banjaxed mate, I think your only hope is if the manufacturer is willing to help you, there are no files available anywhere that I can find, the only thing that might have fixed it is a factory reset, and I guess that is not working from your recovery menu?
Is it out of the question to return it to Dopo?
I suppose you could try running the battery right down again, then leaving it for a while and then restarting again, and keep doing that in the hope that it fires up as its supposed to, but to be honest I have my doubts that it will.
Sorry I cant be of any more help.
Click to expand...
Click to collapse
well i contacted the dopo tech support guy , to see if i can do something else, i guess there is no mucho to do now, maybe i could sell the tablet for parts :C
too bad because i just have 4 months with it, at least i learned something about android, do a f ucking backup and enable debugging mode xd
thanks for all your help and the given support .
I apreciate your replies and now i know a litte bit of this kind of topics .
oscarblue48 said:
I think its banjaxed mate, I think your only hope is if the manufacturer is willing to help you, there are no files available anywhere that I can find, the only thing that might have fixed it is a factory reset, and I guess that is not working from your recovery menu?
Is it out of the question to return it to Dopo?
I suppose you could try running the battery right down again, then leaving it for a while and then restarting again, and keep doing that in the hope that it fires up as its supposed to, but to be honest I have my doubts that it will.
Sorry I cant be of any more help.
Click to expand...
Click to collapse
The factory reset on these models (DOPO/nobis/apex) only re-initialize the data/cache partitions it will not touch/fix the system partition.
Based on the gist of the initial post -- the only solution is to send the tablet to the factory so that they can reload the firmware.
I am in the same boat right now...
Originally I had some file system errors on the internal nand (on APEX GS-918) that caused the boot animation to loop endlessly -- because I had 'USB Debugging' enabled' I was able to open a adb shell
and run fsck/e2fsck and fix it.
But I have a similar problem now (possibly due to adding an option in build.prop) and also disabled 'USB Debugging' and
I can no longer use adb to open a shell during the boot logo.
PS: I hate to necro a thread -- but people need to know that the issue, described, is by-design........they want you to send it in the factory.
When doing a factory reset, any respectable stock recovery, should restore the system partition.
PPS: I do not believe you can install and update in the stock recovery that attempts to write to the system partition.
I believe that can only be handled by using various amlogic tools (such as amlogic usb burning tool, which requires the firmware image that we don't have)
So I have Prestigio Multipad PMP3270B and it's stuck on booting screen. I've tried to enter recovery mode using the volume UP and power button but it doesn't work.
I have also tried to boot it into recovery mode using SDK but it doesn't recognize any commands, it just says error: no devices found
I just don't know what else to try... I've tried looking for ways if I can somehow enable USB debugging using the SDK but my device isn't recognized at all by it... I have all the drivers installed and I don't know what to do.. please help me. Thanks in advance
BUMP... please someone answer me..
NightwishX said:
BUMP... please someone answer me..
Click to expand...
Click to collapse
I have the same problem. Just bought an American Pumpkins - Pumpkin X tablet with Octa Core A83T processor. I used WinDroid Universal Tool Kit to unlock bootloader and now it is stuck on boot screen. I can power it up and down but can not access bootloader/fastbbot. Need help. Don't know what to do. ADB will not recognize device; it says no device found.
AndroidLover819 said:
I have the same problem. Just bought an American Pumpkins - Pumpkin X tablet with Octa Core A83T processor. I used WinDroid Universal Tool Kit to unlock bootloader and now it is stuck on boot screen. I can power it up and down but can not access bootloader/fastbbot. Need help. Don't know what to do. ADB will not recognize device; it says no device found.
Click to expand...
Click to collapse
Never mind. I'm returning it. There is no firmware available for this tablet and American Pumpkins does not reply to customer inquiries.
Hello
I have an MXQ pro 4k that's bricked and gets stuck on boot animation. It has allwinner h3 CPU and XR819 WiFi chip.
I can't enter recovery with av button because it just gives blackscreen and no light from led after that and I can't find firmware for it (Android 7.1.2).
Can anyone help me get to recovery and provide the right firmware to make it work again?
Thanks in advance
i am desperately searching the rom for months to give my ****ty tv box a life again.
iwingmusic said:
i am desperately searching the rom for months to give my ****ty tv box a life again.
Click to expand...
Click to collapse
Custom firmware https://forum.xda-developers.com/t/rom-atv-mod-2019_build-allwinner-h3-mxq-4k-5g-mod-tv-rom.4295863/ https://drive.google.com/file/d/11MZ4_ZXGfCCqRs_9tx_zE0FPlUgcmgw7/view
Ramaga said:
Кастомная прошивка https://forum.xda-developers.com/t/rom-atv-mod-2019_build-allwinner-h3-mxq-4k-5g-mod-tv-rom.4295863/ https://drive.google.com/file/d/11MZ4_ZXGfCCqRs_9tx_zE0FPlUgcmgw7/view
Click to expand...
Click to collapse
Supernova76 said:
Hello
I have an MXQ pro 4k that's bricked and gets stuck on boot animation. It has allwinner h3 CPU and XR819 WiFi chip.
I can't enter recovery with av button because it just gives blackscreen and no light from led after that and I can't find firmware for it (Android 7.1.2).
Can anyone help me get to recovery and provide the right firmware to make it work again?
Thanks in advance
Click to expand...
Click to collapse
I had the same problem with the same specs as yours, and believe it or not here's how I solved this cursed box... with some magic!!
1) Plug a USB male to male cable to the USB port #4 in your TV box and the other end of the cable to the PC.
2) Plug the power cable to the TV box.
3) Watch the damn thing go back to life.
At least, this is how it worked for me.
I still can't access the bootloader through the AV micro switch.
And based on this solution I assume it has to do with some electrical problem, maybe the ac adapter is not delivering the needed power to the board in order to propertly boot up? hence by connecting to the USB port #4 the board takes the needed power? (you can see this by simply leaving the USB connected between the tv box and the pc and unpluging the power adapter... the tv box will remain powered... weird eh?
Ramaga said:
Кастомная прошивкаhttps://forum.xda-developers.com/t/rom-atv-mod-2019_build-allwinner-h3-mxq-4k-5g-mod-tv-rom.4295863/ https://drive.google.com/file/d/11MZ4_ZXGfCCqRs_9tx_zE0FPlUgcmgwBalneario
Click to expand...
Click to collapse
contraseña
Mod translation: password
tonyarevalo said:
contraseña
Mod translation: password
Click to expand...
Click to collapse
como obtener la contraseña?