hi guys
i installed wid Cm7 which was wrking fine on DEfy and i have backup for my froyo and CM7 aswell on my SD card. Now i was trying go in recovery mod then My screen is stuck on GOOGLE logo of CM , but still i can go on bootloader and recovery mod 3e. Not Clockwork Mod. whenever i start phone its come to the GOOGLE logo by CM n then stucks there. i tried to do wipe data n factory data, just took my chances if it could do miracle but didnt wrk either erroe comes.
I tried RSD Lite to flash back Stock Rom Froyo but seems like it cannot " show My device on it" b4 i try to flash. Even if i try to flash with RSD Lite its lands up to fail error. what shud i do any suggestion ? how can i make my device work again :| pls help or guide me out of this problem.
GUYS PLZZ HELP ME IN THIS.....IAM TIRED OF SEARCHING GOOGLE FOR SOLUTIONS AND LAST CAME UP HERE!!
so for tweaking my graphics in my mobile micromax mad a94 i installed a fukin app called "Chain Fire 3d". then it told to installe d drivers and rebooted.... after rebooting my deive was stuck at BOOT LOGO .
I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!
I ALSO TRIED BY UNINSTALLING CHAINFIRE 3D BY ADB COMMANDS ...BUT WHEN ENTERING ADB SHELL COMMAND I GOT "ERROR: CLOSED"....AND ALSO TRIED INSTALLING STOCK ROM BY FASTBOOT BUT ALSO FAILED THERE
MAIN PART COME HERE ...PLZZ SEE PPL ..BEG U!!!!
I WENT TO FLASH STOCK ROM VIA RECOVERY MOD BY INSTALLING PACKAGE FROM SD CARD
AND AFTER SOME SECONDS IT SHOWED"INSTALLATION ABORTED"
ALSO TRIED TO INSTALL BOOT.IMG OF MY DEVICE AGAIN BUT THERE ALSO IT GAVE "INSTALLATION ABORTED"
NOW WHATEVER I FLASH IT GIVES INSTALLATION ABORTED....AND NOW ....IN RECOVERY MOD I CANNOT CHOOSE FILE FROM SD CARD ALTHOUGH MY MEMMORY CARD IS PROPER !!1
I CANT INSTALL ANYTHING FROM INSTALLATION PACAKGE!!1
SO GUYS IAM BEGGING U ..HELP ME IN THIS.... HARDLY 1 MONTH OVER ...SEARCHING NOW ALSO....
PLZZZ GUYS!!!
From what you've explained, seems your phone is running on stock recovery and not custom, that would explain the installation aborted error, else, you're flashing files either in the wrong format or improperly downloaded/copied
The solution is to flash the system.img from stock backup and your phone will be back up.
I need you to clear something up. you said
"I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!"
How exactly did you flash it?
Hovatek said:
From what you've explained, seems your phone is running on stock recovery and not custom, that would explain the installation aborted error, else, you're flashing files either in the wrong format or improperly downloaded/copied
The solution is to flash the system.img from stock backup and your phone will be back up.
I need you to clear something up. you said
"I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!"
How exactly did you flash it?
Click to expand...
Click to collapse
I flashed d stock rom by software called brcm multidownloader tool.....
when i was flashing percentage of completeion was there and at last it showed OK IN green colour.
And i tried installing CWM recovery.img to my mob...but there also installation aborted...... plzz help me bro....
varungr said:
I flashed d stock rom by software called brcm multidownloader tool.....
when i was flashing percentage of completeion was there and at last it showed OK IN green colour.
And i tried installing CWM recovery.img to my mob...but there also installation aborted...... plzz help me bro....
Click to expand...
Click to collapse
if you flashed the stock ROM and flashing was successful, its only logical to say your phone should be in good condition now. am I missing something?
Hovatek said:
if you flashed the stock ROM and flashing was successful, its only logical to say your phone should be in good condition now. am I missing something?
Click to expand...
Click to collapse
Yes i flashed d stock rom by brcm software and after 100% i was told to remove usb cable and then my phone restarted ...now also phone stuck in boot screen only..
today i installed cwm recovery and there i cant mount system ot sd card...not even anything..
if i flash using ad package ...after 100% it gives installation aborted...
what shld i do???
varungr said:
Yes i flashed d stock rom by brcm software and after 100% i was told to remove usb cable and then my phone restarted ...now also phone stuck in boot screen only..
today i installed cwm recovery and there i cant mount system ot sd card...not even anything..
if i flash using ad package ...after 100% it gives installation aborted...
what shld i do???
Click to expand...
Click to collapse
So did you find any solution bro... Facing the same problem.. Tired of Googling.. Used Every method like adb,fastboot but cannot get further...
Stucked in CWm bootloop Micromax mad a94
Can any one help me to fix this crap cwm bootloop on my mad a94.Whenever I turn on my phone it goes into the cwm screen .I hd tried to wipe data, dalvic cache.mount sd, system etc but it doesnt work plZ help me!!
varungr said:
GUYS PLZZ HELP ME IN THIS.....IAM TIRED OF SEARCHING GOOGLE FOR SOLUTIONS AND LAST CAME UP HERE!!
so for tweaking my graphics in my mobile micromax mad a94 i installed a fukin app called "Chain Fire 3d". then it told to installe d drivers and rebooted.... after rebooting my deive was stuck at BOOT LOGO .
I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!
I ALSO TRIED BY UNINSTALLING CHAINFIRE 3D BY ADB COMMANDS ...BUT WHEN ENTERING ADB SHELL COMMAND I GOT "ERROR: CLOSED"....AND ALSO TRIED INSTALLING STOCK ROM BY FASTBOOT BUT ALSO FAILED THERE
MAIN PART COME HERE ...PLZZ SEE PPL ..BEG U!!!!
I WENT TO FLASH STOCK ROM VIA RECOVERY MOD BY INSTALLING PACKAGE FROM SD CARD
AND AFTER SOME SECONDS IT SHOWED"INSTALLATION ABORTED"
ALSO TRIED TO INSTALL BOOT.IMG OF MY DEVICE AGAIN BUT THERE ALSO IT GAVE "INSTALLATION ABORTED"
NOW WHATEVER I FLASH IT GIVES INSTALLATION ABORTED....AND NOW ....IN RECOVERY MOD I CANNOT CHOOSE FILE FROM SD CARD ALTHOUGH MY MEMMORY CARD IS PROPER !!1
I CANT INSTALL ANYTHING FROM INSTALLATION PACAKGE!!1
SO GUYS IAM BEGGING U ..HELP ME IN THIS.... HARDLY 1 MONTH OVER ...SEARCHING NOW ALSO....
PLZZZ GUYS!!!
Click to expand...
Click to collapse
Do the following
Go to the recovery mode
Select advance and wipe dalvik cache
Return to main menu and wipe data factory reset
And wipe cache partition
That's it. Reboot phone
Hit thanks
varungr said:
GUYS PLZZ HELP ME IN THIS.....IAM TIRED OF SEARCHING GOOGLE FOR SOLUTIONS AND LAST CAME UP HERE!!
so for tweaking my graphics in my mobile micromax mad a94 i installed a fukin app called "Chain Fire 3d". then it told to installe d drivers and rebooted.... after rebooting my deive was stuck at BOOT LOGO .
I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!
I ALSO TRIED BY UNINSTALLING CHAINFIRE 3D BY ADB COMMANDS ...BUT WHEN ENTERING ADB SHELL COMMAND I GOT "ERROR: CLOSED"....AND ALSO TRIED INSTALLING STOCK ROM BY FASTBOOT BUT ALSO FAILED THERE
MAIN PART COME HERE ...PLZZ SEE PPL ..BEG U!!!!
I WENT TO FLASH STOCK ROM VIA RECOVERY MOD BY INSTALLING PACKAGE FROM SD CARD
AND AFTER SOME SECONDS IT SHOWED"INSTALLATION ABORTED"
ALSO TRIED TO INSTALL BOOT.IMG OF MY DEVICE AGAIN BUT THERE ALSO IT GAVE "INSTALLATION ABORTED"
NOW WHATEVER I FLASH IT GIVES INSTALLATION ABORTED....AND NOW ....IN RECOVERY MOD I CANNOT CHOOSE FILE FROM SD CARD ALTHOUGH MY MEMMORY CARD IS PROPER !!1
I CANT INSTALL ANYTHING FROM INSTALLATION PACAKGE!!1
SO GUYS IAM BEGGING U ..HELP ME IN THIS.... HARDLY 1 MONTH OVER ...SEARCHING NOW ALSO....
PLZZZ GUYS!!!
Click to expand...
Click to collapse
dude samething happened to me if its because of chainfire then do the following take ur battery out and at the time u insert go to recovery mode micromax recover - power+volume down then from there go to choose a install new zip that is it can be restored only if u have a backup or else try finding a image in google and this must work and if u dont have backup and only idea i can share is clear cache go to advanced clear dalvik cache and reboot ua phone and again take off battery while booting and restart :good:
all the best
Chainfire 3D only support Gingerbread or lower. Not for ics+, try to wipe cache and dalvik,if problem still exists, reflash ur rom
Hello,
My device is Lenovo Z90a40/Vibe Shot
My problem is when trying to install mokee from twrp
so first i delete data,dalvik cache etc. and somehow my phone shutted down
now im stuck at twrp and cant flash anything
tried to use QFil, says port 9006
and tried to flash rom from SD card, phone doesnt even detected it :crying:
so i can access twrp but i have no rom inside my int. storage
help please?
sorry if you dont understand
Hello dears this is my first Q. On xda.
I am using rooted mi4i with twrp.
Accidently i deleted system via twrp.
After that i flashed cornal 8.1.6.0 for linage os 15.
But i got error like something unable to mount persist and stuck in logo after any rom flashing.
Now i wants a fastboot rom with cornal because my stock cornal formated.
Mi center sarvices says they have nothing for this old sat.
Please answer
I need help..!!!
I have Redmi 6A device...
I unlocked bootloader then I installed Orange Fox Recovery...
And while exploring it I deleted /vendor and /cust folders and wiped some cache....
Now my device is stuck in boot loop...
It only just shows MI logo then reboots and this goes on..!!!
Its not even showing boot animation..!!
I tried hard reset...flashed a custom rom...but nothing's happening...
What should I do now I dont want my phone to be useless
Please help me!!!!
Re-flash Stock ROM to get rid off of all modificatins you applied so far.
Also: Replace this thread's senseless title by Redmi 6A bricked thus mainly owners of such a phone get addressed.