Database Info

[app][equalizer][ICS]Viper4FX_221_with_lib_driver[Flashable.zip]

Viper4FX_221_with_lib_driver
I've found music fx..
and that awesome works
from source
http://forum.xda-developers.com/showthread.php?t=2191223
All credits to him
zhuhang
I've been making this aplication to flashable zip..
and easy for installing
just entry to recovery or cwm..
and flash 'VIPER4FX_with_Driver.zip'
reboot and done..
you don't need to instal driver,
cause,I've collected them into one
requirement
- Your phone have acces 'ROOT' permission
- Only for ICS
tested on my phone,
-hisense ad686g
-Sony experia neo L
-Lenovo p700i
and works awesome
SETTINGS
For headset
-Check/tick Master power
-Check/tick Fireequalizer (according by your self)
-Check/tick REVERBERATION > select dry signal and set to 100
-Check/tick Dynamic System >Select Dynamic Bass and set to 33 or 36
-Check/tick Fidelity control > select bass boost and set to 6.0dB
-Check/tick Master Gate (LIMITER) > select output gain and set to 6.0dB
For Speaker
-Check/tick Master power
-Check/tick Fireequalizer (according by your self)
-Check/tick REVERBERATION > select dry signal and set to 100
-Check/tick Master Gate (LIMITER) > select output gain and set to 6.0dB
-check/tick Xloud
DONE
have enjoy your music..
DONT Forget to Backup..DWYOR
if help,press thanks
Cheeeerrrssss

reserved
ryanaepple said:
Viper4FX_221_with_lib_driver[
I've found music fx..
and that awesome works
from source
http://forum.xda-developers.com/showthread.php?t=2191223
All credits to him
zhuhang
I've been making this aplication to flashable zip..
and easy for installing
just entry to recovery or cwm..
and flash 'VIPER4FX_with_Driver.zip'
reboot and done..
you don't need to instal driver,
cause,I've collected them into one
requirement
- Your phone have acces 'ROOT' permission
- Only for ICS
tested on my phone,
-hisense ad686g
-Sony experia neo L
-Lenovo p700i
and works awesome
SETTINGS
For headset
-Check/tick Master power
-Check/tick Fireequalizer (according by your self)
-Check/tick REVERBERATION > select dry signal and set to 100
-Check/tick Dynamic System >Select Dynamic Bass and set to 33 or 36
-Check/tick Fidelity control > select bass boost and set to 6.0dB
-Check/tick Master Gate (LIMITER) > select output gain and set to 6.0dB
For Speaker
-Check/tick Master power
-Check/tick Fireequalizer (according by your self)
-Check/tick REVERBERATION > select dry signal and set to 100
-Check/tick Master Gate (LIMITER) > select output gain and set to 6.0dB
-check/tick Xloud
DONE
have enjoy your music..
DONT Forget to Backup..DWYOR
if help,press thanks
Cheeeerrrssss
Click to expand...
Click to collapse
reserved again

[App] Volume +

https://play.google.com/store/apps/details?id=com.TEST.android.lvh
I found this old app still works great on my D802 QB2 with this (HEADSET) setting:
1. Audio Modifications = Enabled
2. Simple Volume Boost = Disable
3. Bass Boost = 8 (max)
4. Echo/Delay = 0
5. EQ Preset = Bass Boost (or others) just make sure to set "Volume Level" to 0
SPEAKER setting only work with this:
1 - 4 same as headset
5. EQ Preset = Flat & "Volume Level" set to 10
need to enable/disable eq preset till this work
BLUETOOTH setting: untested

Nice, but the phone already kills my ears on full volume! (Headphones)

That app was awesome back in the day. Before Viper4android

Viper4Android

I have just installed this and for now it works
I will let u know in 1 or 2 days is there any problem
Its not my work but pressing Thanks wouldnt be bad
http://www.gizdev.com/guide-install-viper4android-on-any-lollipop-devices-android-5-05-1/

Ive been using it for almost a month no problems so far
Sent from my LGLS996 using XDA Free mobile app

lingo2012 said:
Ive been using it for almost a month no problems so far
Sent from my LGLS996 using XDA Free mobile app
Click to expand...
Click to collapse
Ohh cool cool
Whats the way you installed it?

Followed this guide for the g4 it works great on g flex 2
http://forum.xda-developers.com/g4/themes-apps/root-install-viper4android-rooted-lg-g4-t3181115
Sent from my LGLS996 using XDA Free mobile app

Works great for me too. I also followed the above G4 guide. Unsure of battery drain at the moment.

I have been using this for more than a month and no battery drain issues or any other problem. Works perfectly. And yes I had followed the same G4 guide.

Phone Speaker profile + Surround sound!
I made a V4A profile after installing the Surround sound mixer_paths.xml found here: http://forum.xda-developers.com/g-flex2/development/surround-mode-h955-t3376881/ (also edited volumes in post 3 of that thread.)
After installing V4A, go to Menu > UI Setting > select "Expert"
On the Phone Speaker tab:
Enable V4A-SpeakerFX
Enable FIREqualizer > Preset "Treble Booster"
Enable Convolver > Impulse Response "SonicHunter Speakers.wav" (Download it here, unzip and copy the .wav file to sdcard/ViPER4Android/Kernel/ folder on your phone. Credit to Vinardo_ZzZ 2000 and his awesome V4A IRS thread here)
Enable eXtra-Loud > Moderate > 6x > -6.0 dB
Output Gain 4.1 dB
Limit Threshold -3.0 dB
You may need to tweak the dB values according to content, but this particular V4A convolver combined with the surround sound mod has made for a pleasant stereo experience for me. Hope others will like it too.
I also suggest trying out Viper4713's Material mod for V4A 2.4.0.1 found here. Makes the app look that much cleaner.

@PhantasmRezound tried your settings but my earpiece speakers still distorts a lot. Better than original surround mod but still far from an enjoyable result. I think flex 2 earpiece can't be pushed to high volume. Thanks anyway

michele955 said:
@PhantasmRezound tried your settings but my earpiece speakers still distorts a lot. Better than original surround mod but still far from an enjoyable result. I think flex 2 earpiece can't be pushed to high volume. Thanks anyway
Click to expand...
Click to collapse
There is always a possibility for slight variance in hardware (aged speaker/phone case altering sound) but especially source material plays a part too. I was listening to a lot of music and movies just fine without extreme distortion... then certain YouTube videos that had clipping from poor gain and low voice tone distorted the earpiece for me too.
You can try to redo the surround values even lower, maintaining a difference of about 8 between the the speaker channels to maintain stereo balance. You may also use V4A from here and alter the last three gain values until the distortion is gone. For one video with clipping I watched, I had to drop eXtra-Loud to -10.5 dB and Limit Threshold to -6.0 dB to eliminate the clipping causing distortion, then reboost the Output Gain positive step by step until volume was higher again, without distortion.
Going to experiment with the high-pass filters and possibly other Qualcomm biquad filters in the mixer_paths.xml file next.

install Viper4Android
busybox
Link (Linux Mode Changer)
driver failed

paris07121978 said:
install Viper4Android
busybox
Link (Linux Mode Changer)
driver failed
Click to expand...
Click to collapse
Same, anyone know how to solve this?

Make sure you are rooted successfully and your SU manager app is allowing root to those programs (using Chainfire's SuperSU here.) Ensure Busybox is installed and running properly (using Stericson's Busybox Free here.) SELinuxModeChanger should have Permissive pressed in/greyed out; reboot for it to take effect first time. Verify Permissive system in the system Settings > General > About Phone > Software. Make sure you're using the latest version of V4A compatible with LP (2.4.0.1 at this time.) Install V4A drivers from its menu and reboot; check Driver Status and it should read "Normal." If it doesn't, something above is broken or perhaps another audio mod may be conflicting (if you installed other full system EQ style mods, not stereo/boosted speaker simple mods typically.) If Driver Status is greyed out on the V4A menu you need to change FX Compatible mode to Normal. (Compatible mode isn't system-wide effect and only to use with certain audio apps like Poweramp that run EQ functions of their own alongside V4A.) Good luck and hope you can trace the issue down.

Thanks a lot. I got it working. What audio source are you using to test it?

Best sound quality settings----dolby and viper rn3 sd version only

:good::good::good::good:first
ur mobile must be root for ..... installing dolby and viper //...bcz you have to install first dolby and viper for android////DO Not install first viper and then dolby .... this is important... it did not work well sol follow as i said.....
second:
USE MAGISK FOR INSTALL THOSE ........
third : viper need to tune up for setting... but not the case for dolby ..just turn the power ON dolby and set rich,surround virtu, and dialogue enhancer ... dolby part over
VIPER SETTINGS: IM USING ATHCLR100 THATS VERY CHEAP AND POWERFUL EARPHONE I USE PERSONALLY. SHENNHEISER i dont think so... ok before tune up settings we should turn on default settings in ouR REDMI NOTE 3 SD SOUND SECTION... SET TO AUDIO SETTINGS , MI SOUND ENHANCER .....>>>>> HEAD PHONE TYPE >>> MI EARBUDS
OK NOW IS MAIN PART OF VIPER ,,,,, U SHOULD DRIVER INSTALLED ON VIPER THATS NEON DRIVER and also status enabled
1>>UNDER HEADSET SECTION>>>MASTER POWER ON and then go to VIPER-DDC ON
2>>UNDER VIPER DDC>>>>TURN ON RADIO BUTTON --=== HIFIMAN-RE0
3>> TURN ON DYNAMIC SYSTEM>>> UNDER THIS SECTION >>> SELECT UNKOWN TYPE III and dynamic base set to 12%
4>> TURN ON VIPER CLARITY >>> SET TO XHIFI >>SELECT CLARITY 6D.B
5>>TURN ON AUDIO SYSTEM PROTECTION... LEAVE IT AS IT IS
AND
FINALLY USE X PLAYER3D APP FROM PLAYSOTRE OR SOMEONE CRACKED XPLAYER 3d u can get it from google search easily
but xplayer 3d is option only ... upto ur choice but ///////
sound IS REALLY AWSOME LIKE HELLLLLLL YEAH !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! PERFECT EACH AND EVERY NOTE .......
TELL ME AS YOUR EXPERIENCE ... PUNCHY PURE PERFECT CLARITY .......... NOT WORD ... SOUND STAGE AWSME .... TRY IT ......
FROM TN.... OK BYE SEEE U [email protected]@@@@@@@@@@~!!!!!:good::good::good::good::good::good::good::good::good::good::good::good::highfive::highfive::highfive::highfive::fingers-crossed::fingers-crossed::laugh::good::good::highfive::highfive::highfive:

Yeah settings are great...
can you give any settings for over-eir Headphones ? like corsair HS 50 i am using. Maybe more loudeness would be good.

Android 10 headphone volume even lower than pie? any suggestions?

So before updating I had a couple of sound mods because the stock volume is way too low for me. But after the update I did a wipe ofc and now I can bearly hear my music. I installed the volume booster magisk and viper4android but there is no difference. The only thing that I did before different was editing a file in /system/etc. Something like volume limiter. It was at 80 something and I changed it to 99. But after the update that file doesn't exist in Android 10 apperently. I'm rooted and I know my way around modding and stuff. Is there any way to boost my audio volume? I'm talking about Bluetooth headphones btw...

Look in theme /mod... Thread for stereo speaker volume boost mod

peteus said:
Look in theme /mod... Thread for stereo speaker volume boost mod
Click to expand...
Click to collapse
That's the one that I installed. V3. But doesn't work on Bluetooth I think

I'm on 10 and I have dolby and viper 2.7 working. All crisp and loud.

tropical cactus said:
I'm on 10 and I have dolby and viper 2.7 working. All crisp and loud.
Click to expand...
Click to collapse
Am I doing something wrong? What settings do you use?

I had the same problem. Pie was crappy. Q is horrible for Bluetooth volume.
I fixed Pie by installing Viper, but I cant get Viper to install its driver in Q.
This might be why Viper doesnt work for you, either. It isnt installing its driver.
I did find a way to increase the gain in Q though.
1. With your headset connected, press Vol + or - to get the pop out menu.
2. Press the little EQ icon under the volume menu.
3. Press the gear icon for the "Sound and Vibration" settings menu
4. In that menu, press Dolby Atmos.
5. Near the bottom look for "Style preference" under the Earphone adjustment section
6. This will bring up an Equalizer.
7. Turn up the gain !!!

longview41 said:
I had the same problem. Pie was crappy. Q is horrible for Bluetooth volume.
I fixed Pie by installing Viper, but I cant get viper to install its driver in Q.
I did find a way to increase the gain in Q though.
1. With your headset connected, press Vol + or - to get the pop out menu.
2. Press the little EQ icon under the volume menu.
3. Press the gear icon for the "Sound and Vibration" settings menu
4. In that menu, press Dolby Atmos.
5. Near the bottom look for "Style preference" under the Earphone adjustment section
6. This will bring up an Equalizer.
7. Turn up the gain !!!
Click to expand...
Click to collapse
I think it's a bug... I remember having it before the update but it's just blank now

Vladtdr3 said:
Am I doing something wrong? What settings do you use?
Click to expand...
Click to collapse
Viper drivers need to be installed twice on 10. I'm using xXx rom to get dolby digital plus.

tropical cactus said:
Viper drivers need to be installed twice on 10. I'm using xXx rom to get dolby digital plus.
Click to expand...
Click to collapse
I installed this as well but other than downgrading my viper4android version it didn't do much... In mastergate I put the output to Max but it's still so quiet. I find it embarrassing how a jailbroken iPhone can do this is 2 seconds but with an rooted Android it's impossible?. Where is this Dolby plus? I just have the normal settings.

Vladtdr3 said:
I installed this as well but other than downgrading my viper4android version it didn't do much... In mastergate I put the output to Max but it's still so quiet. I find it embarrassing how a jailbroken iPhone can do this is 2 seconds but with an rooted Android it's impossible. Where is this Dolby plus? I just have the normal settings.
Click to expand...
Click to collapse
Check if sound is processing by pressing icon next to settings icon. If not, go to settings/apps and clear viper storage and set up again. Dolby plus is part of a custom rom. Try getting viper to process sound first.

tropical cactus said:
Check if sound is processing by pressing icon next to settings icon. If not, go to settings/apps and clear viper storage and set up again. Dolby plus is part of a custom rom. Try getting viper to process sound first.
Click to expand...
Click to collapse
There is a change that is clear. Yea I know... I installed the custom rom m

So is there any solution to this? I also noticed that my bluetooth volume is way more silent now, even if I go up with the volume.