Related
I am using Hercolubus Rom v2.5 and i want my phone speaker to be louder i tried [MOD]MegaBassBeats but my speaker went crazy so i had to delete then any other software or mod for phone to get louder sound
Shadowmaniac said:
I am using Hercolubus Rom v2.5 and i want my phone speaker to be louder i tried [MOD]MegaBassBeats but my speaker went crazy so i had to delete then any other software or mod for phone to get louder sound
Click to expand...
Click to collapse
I don't think this helps... Sound is always low on g3
You can use dsp manager to decrease the bass and increase treble
This way you will lose sound quality and get higher volumes
I think lternatives like increasing voltage (if at all possible) or something will definitely get you higher volumes but kill your speaker
Our speaker already struggles at higher volumes so try putting bass to minimum
Shadowmaniac said:
I am using Hercolubus Rom v2.5 and i want my phone speaker to be louder i tried [MOD]MegaBassBeats but my speaker went crazy so i had to delete then any other software or mod for phone to get louder sound
Click to expand...
Click to collapse
lol.....i have included megabassbeats mod in to the rom at first place....tip: go in voodoo sound settings & untick tune speaker...& in device settings do the same....it's better this way
rkoby13 said:
lol.....i have included megabassbeats mod in to the rom at first place....tip: go in voodoo sound settings & untick tune speaker...& in device settings do the same....it's better this way
Click to expand...
Click to collapse
I really wonder how many of us (users) can really get the difference
@OP: How is it that your speaker go crazy without any modification to system
I am sure you must have done something with dsp (if included in ROM) after installing the mod
Sent from my GT-I5800
rkoby13 said:
lol.....i have included megabassbeats mod in to the rom at first place....tip: go in voodoo sound settings & untick tune speaker...& in device settings do the same....it's better this way
Click to expand...
Click to collapse
did that thanks so you say mega bass is included how did i flash it again :/
allspark2020 said:
I really wonder how many of us (users) can really get the difference
@OP: How is it that your speaker go crazy without any modification to system
I am sure you must have done something with dsp (if included in ROM) after installing the mod
Sent from my GT-I5800
Click to expand...
Click to collapse
really don't know :/
Shadowmaniac said:
did that thanks so you say mega bass is included how did i flash it again :/
Click to expand...
Click to collapse
u can reflash megabassbeats mod unlimited times....if they are allready there...there's no limit of how many times you can re-flash anything....
BTW: @Shadowmaniac..
Why on earth didn't you post in my thread?....i'm open for questions there....if i feel ok(have some health issues lately)....
I have just installed this and for now it works
I will let u know in 1 or 2 days is there any problem
Its not my work but pressing Thanks wouldnt be bad
http://www.gizdev.com/guide-install-viper4android-on-any-lollipop-devices-android-5-05-1/
Ive been using it for almost a month no problems so far
Sent from my LGLS996 using XDA Free mobile app
lingo2012 said:
Ive been using it for almost a month no problems so far
Sent from my LGLS996 using XDA Free mobile app
Click to expand...
Click to collapse
Ohh cool cool
Whats the way you installed it?
Followed this guide for the g4 it works great on g flex 2
http://forum.xda-developers.com/g4/themes-apps/root-install-viper4android-rooted-lg-g4-t3181115
Sent from my LGLS996 using XDA Free mobile app
Works great for me too. I also followed the above G4 guide. Unsure of battery drain at the moment.
I have been using this for more than a month and no battery drain issues or any other problem. Works perfectly. And yes I had followed the same G4 guide.
Phone Speaker profile + Surround sound!
I made a V4A profile after installing the Surround sound mixer_paths.xml found here: http://forum.xda-developers.com/g-flex2/development/surround-mode-h955-t3376881/ (also edited volumes in post 3 of that thread.)
After installing V4A, go to Menu > UI Setting > select "Expert"
On the Phone Speaker tab:
Enable V4A-SpeakerFX
Enable FIREqualizer > Preset "Treble Booster"
Enable Convolver > Impulse Response "SonicHunter Speakers.wav" (Download it here, unzip and copy the .wav file to sdcard/ViPER4Android/Kernel/ folder on your phone. Credit to Vinardo_ZzZ 2000 and his awesome V4A IRS thread here)
Enable eXtra-Loud > Moderate > 6x > -6.0 dB
Output Gain 4.1 dB
Limit Threshold -3.0 dB
You may need to tweak the dB values according to content, but this particular V4A convolver combined with the surround sound mod has made for a pleasant stereo experience for me. Hope others will like it too.
I also suggest trying out Viper4713's Material mod for V4A 2.4.0.1 found here. Makes the app look that much cleaner.
@PhantasmRezound tried your settings but my earpiece speakers still distorts a lot. Better than original surround mod but still far from an enjoyable result. I think flex 2 earpiece can't be pushed to high volume. Thanks anyway
michele955 said:
@PhantasmRezound tried your settings but my earpiece speakers still distorts a lot. Better than original surround mod but still far from an enjoyable result. I think flex 2 earpiece can't be pushed to high volume. Thanks anyway
Click to expand...
Click to collapse
There is always a possibility for slight variance in hardware (aged speaker/phone case altering sound) but especially source material plays a part too. I was listening to a lot of music and movies just fine without extreme distortion... then certain YouTube videos that had clipping from poor gain and low voice tone distorted the earpiece for me too.
You can try to redo the surround values even lower, maintaining a difference of about 8 between the the speaker channels to maintain stereo balance. You may also use V4A from here and alter the last three gain values until the distortion is gone. For one video with clipping I watched, I had to drop eXtra-Loud to -10.5 dB and Limit Threshold to -6.0 dB to eliminate the clipping causing distortion, then reboost the Output Gain positive step by step until volume was higher again, without distortion.
Going to experiment with the high-pass filters and possibly other Qualcomm biquad filters in the mixer_paths.xml file next.
install Viper4Android
busybox
Link (Linux Mode Changer)
driver failed
paris07121978 said:
install Viper4Android
busybox
Link (Linux Mode Changer)
driver failed
Click to expand...
Click to collapse
Same, anyone know how to solve this?
Make sure you are rooted successfully and your SU manager app is allowing root to those programs (using Chainfire's SuperSU here.) Ensure Busybox is installed and running properly (using Stericson's Busybox Free here.) SELinuxModeChanger should have Permissive pressed in/greyed out; reboot for it to take effect first time. Verify Permissive system in the system Settings > General > About Phone > Software. Make sure you're using the latest version of V4A compatible with LP (2.4.0.1 at this time.) Install V4A drivers from its menu and reboot; check Driver Status and it should read "Normal." If it doesn't, something above is broken or perhaps another audio mod may be conflicting (if you installed other full system EQ style mods, not stereo/boosted speaker simple mods typically.) If Driver Status is greyed out on the V4A menu you need to change FX Compatible mode to Normal. (Compatible mode isn't system-wide effect and only to use with certain audio apps like Poweramp that run EQ functions of their own alongside V4A.) Good luck and hope you can trace the issue down.
Thanks a lot. I got it working. What audio source are you using to test it?
http://forum.xda-developers.com/android/software/app-divinebeats-sound-master-phone-sony-t3274355
above link is to a audio mod with both V4A and Dolby atmos, by TheRoyalSeeker
It is not my work i am just sharing it here coz it may work in our roms as it already works in mine.
I have tried it on my phone,
ROM skydragon 6.01
it works except for the sony sound settings,
also if it works on any other rom please post the status
share the joy :highfive:
I hope working with CM13
What do you mean that is working but not the sony settings? So just the viper audio settings? Cause viper4android was already working
MariocolaAnyPark said:
What do you mean that is working but not the sony settings? So just the viper audio settings? Cause viper4android was already working
Click to expand...
Click to collapse
viper4android , dolby atmos, dolby digital, all these work, visit the post, more options are there
Divine Equalizer not working cm13-MM and Music also
Divine Equalizer not working cm13-MM and Music also not working
vinu.gwen said:
Divine Equalizer not working cm13-MM and Music also not working
Click to expand...
Click to collapse
yeah but dolby and v4a works right, im gonna try for cynapop will update post then
Everyone know Dolby and v4a working in CM13.
Flashed this mod with DD+ and it made everything sound garbled without even turning the mods on. All apps seem to work, including Sony player but results are horrible, something is broken there.
Oxygen OS 2.2.0 with Boeffla kernel
Edit: even bigger disappointment is finding out that V4A does not work on OOS. Damn!
Sent from my ONE A2003 using Tapatalk
I have tried this one three different custom CM13's so far and the Divine Equalizer has worked on none of them. I can get V4A working, but only if I install it using the "LoliViper" ZIP. Is there a fix OP or am I just screwed?
@Rub It is maybe you need to change selinux to permissive instead of enforcing?
Dac0908 said:
Flashed this mod with DD+ and it made everything sound garbled without even turning the mods on. All apps seem to work, including Sony player but results are horrible, something is broken there.
Oxygen OS 2.2.0 with Boeffla kernel
Edit: even bigger disappointment is finding out that V4A does not work on OOS. Damn!
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
working on oos 3.0...
Will this work on H2OS?
raghu0421 said:
working on oos 3.0...
Click to expand...
Click to collapse
Just tried it on CyanOxy and yes, short answer would be that it works but results aren't so impressive. Distortions creep in, while bass was lacking before this now is overblown and I can't find a way to tone it down effectively. V4A is hidden somewhere in there but installing regular app doesn't seem to work for adjusting, parallel to that there is so much sound processing that it is insane. Divine eq doesn't respond, two music players also fall apart when skipping songs. Not good. Maybe on some other phone or ROM... so for now, nandroid back and use just clean V4A. Although even that worked better on CM13
New v7.00 seems to work, and also has new approach - base zip with addons and/or apps separately :good:
Nope. Bluetooth is gone after flashing. Sound seems to be better than before flashing it, but with V4A turned off. Turning it on just ruins everything, so there is again too much processing out of users control.
Dolby Atmos is only other visible app and it just has to be turned off or crackling and distortions go over everything
Also volume control is broken, full volume is about on half of the scale, with horrible distortions, then it tones down and going louder again, only with more horrible distortions. Ugh.
Sent from my ONE A2003 using Tapatalk
Any way (.zip) to uninstall the Viper ?
Its pain in $$a to restore the ROM from TWRP
Viper is no problem but all other libs and changes are impossible to remove. Always backup before flashing this kind of stuff, then restore takes only a minute
Razor64 said:
Will this work on H2OS?
Click to expand...
Click to collapse
I'm running H2OS 6.0.1 (V1.4.0) Firmware Version ONE A2005_24_160513 and it's working for me.
All I did was set SELinuxMod to Permissive using the SELinuxModeChanger app and used the Dolby Atmos Remover zip to remove DA mod. Working great with my headphones but haven't tried bluetooth audio yet, which is when I use my phone for music most...
Backup data first!
worst thing to flash. broke both my speaker and headphones. worst sound mod ever madhe.
Yup.
Problem with bad audio was on first OOS3 beta and later it was fixed, and with Dirac HD (whatever that is, sound is ok) on final OOS or V4A (which still plays funny with bluetooth, needs user fixing) - I don't see the point of these mods. They just create more problems, and do sound processing without any user control and cannot be turned off. That is just nasty.
Anyway, it is impossible to make it sound better with some software mods, it is just an illusion. We need better hardware, better DAC, better amplifier to really get better sound. Using OTG, or maybe just in-line headphone amp from FiiO or something similar. Short of that, V4A is more than enough for some tweaks.
So before updating I had a couple of sound mods because the stock volume is way too low for me. But after the update I did a wipe ofc and now I can bearly hear my music. I installed the volume booster magisk and viper4android but there is no difference. The only thing that I did before different was editing a file in /system/etc. Something like volume limiter. It was at 80 something and I changed it to 99. But after the update that file doesn't exist in Android 10 apperently. I'm rooted and I know my way around modding and stuff. Is there any way to boost my audio volume? I'm talking about Bluetooth headphones btw...
Look in theme /mod... Thread for stereo speaker volume boost mod
peteus said:
Look in theme /mod... Thread for stereo speaker volume boost mod
Click to expand...
Click to collapse
That's the one that I installed. V3. But doesn't work on Bluetooth I think
I'm on 10 and I have dolby and viper 2.7 working. All crisp and loud.
tropical cactus said:
I'm on 10 and I have dolby and viper 2.7 working. All crisp and loud.
Click to expand...
Click to collapse
Am I doing something wrong? What settings do you use?
I had the same problem. Pie was crappy. Q is horrible for Bluetooth volume.
I fixed Pie by installing Viper, but I cant get Viper to install its driver in Q.
This might be why Viper doesnt work for you, either. It isnt installing its driver.
I did find a way to increase the gain in Q though.
1. With your headset connected, press Vol + or - to get the pop out menu.
2. Press the little EQ icon under the volume menu.
3. Press the gear icon for the "Sound and Vibration" settings menu
4. In that menu, press Dolby Atmos.
5. Near the bottom look for "Style preference" under the Earphone adjustment section
6. This will bring up an Equalizer.
7. Turn up the gain !!!
longview41 said:
I had the same problem. Pie was crappy. Q is horrible for Bluetooth volume.
I fixed Pie by installing Viper, but I cant get viper to install its driver in Q.
I did find a way to increase the gain in Q though.
1. With your headset connected, press Vol + or - to get the pop out menu.
2. Press the little EQ icon under the volume menu.
3. Press the gear icon for the "Sound and Vibration" settings menu
4. In that menu, press Dolby Atmos.
5. Near the bottom look for "Style preference" under the Earphone adjustment section
6. This will bring up an Equalizer.
7. Turn up the gain !!!
Click to expand...
Click to collapse
I think it's a bug... I remember having it before the update but it's just blank now
Vladtdr3 said:
Am I doing something wrong? What settings do you use?
Click to expand...
Click to collapse
Viper drivers need to be installed twice on 10. I'm using xXx rom to get dolby digital plus.
tropical cactus said:
Viper drivers need to be installed twice on 10. I'm using xXx rom to get dolby digital plus.
Click to expand...
Click to collapse
I installed this as well but other than downgrading my viper4android version it didn't do much... In mastergate I put the output to Max but it's still so quiet. I find it embarrassing how a jailbroken iPhone can do this is 2 seconds but with an rooted Android it's impossible?. Where is this Dolby plus? I just have the normal settings.
Vladtdr3 said:
I installed this as well but other than downgrading my viper4android version it didn't do much... In mastergate I put the output to Max but it's still so quiet. I find it embarrassing how a jailbroken iPhone can do this is 2 seconds but with an rooted Android it's impossible. Where is this Dolby plus? I just have the normal settings.
Click to expand...
Click to collapse
Check if sound is processing by pressing icon next to settings icon. If not, go to settings/apps and clear viper storage and set up again. Dolby plus is part of a custom rom. Try getting viper to process sound first.
tropical cactus said:
Check if sound is processing by pressing icon next to settings icon. If not, go to settings/apps and clear viper storage and set up again. Dolby plus is part of a custom rom. Try getting viper to process sound first.
Click to expand...
Click to collapse
There is a change that is clear. Yea I know... I installed the custom rom m
So is there any solution to this? I also noticed that my bluetooth volume is way more silent now, even if I go up with the volume.
Hey,
Can you share your car audio profiles?
Recently I have Viper4Android and I do not understand many settings. I know it's often a matter of taste and audio equipment, but maybe there will be some nice setup.
Finally, the question is, is it possible to make Viper4Android work for FM radio as well? Are all the settings that will work only in the phone speaker tab?
Hey,
I'm using Viper4Android 2.3.4.0
My settings are:
Lock effect mode -> headset
headset tab:
MASTER POWER
Enable ----- Tick
PLAYBACK GAIN CONTROL ( That is turn off/disabled)
Enable----- no tick
Select effect strength- Slight
Max Gain--- 4x
Max Output--- - 1.9 dB
FIREQUALIZER ( That is turn off/disabled)
Enable---- no tick
Select Preset- Custom
CONVOLVER
Enable--- tick
Impulse response--- Dolby Pro Logic II.irs
Cross Channel--- 0%
FIELD SURROUND and DIFFERENTIAL SURROUND ( That is turn off/disabled)
HEADPHONE SURROUND ( That is turn off/disabled)
Enable--- no tick
Select effect level--- Level 2
REVERVERATION ( That is turn off/disabled)
Leave default
DYNAMIC SYSTEM ( That is turn off/disabled)
Enable--- no Tick
Select listening device--- Common earphone V2
Select Dynamic Bass-- 0
TUBE SIMULATOR ( That is turn off/disabled)
FIDELITY CONTROL
Enable Viper Bass--- no Tick
Select Bass Mode--- Natural Bass
Select Bass frequency--- 60 Hz
Select Bass Boost-- 10 dB
Enable Viper Clarity--- Tick
Select Clarity Mode--- Natural
Select Clarity--- 3,5db
AUDITORY SYSTEM PROTECTION (optional. Test and select according to your preference)
Enable---- Tick
Select Binaural Level--- moderate
MASTER GATE ( That is turn off/disabled)
enjoy
Hi, how did you installed it?
I've tried it with the magisk Apps, but the Status in Viper ist Unnormal/Abnormal. So i can't really change a lot of settings. Also the App doesn't start automatically after reboot.
Is there a way to install Apps/Mods with Magisk, where the program need me to touch a Volume Buttons? If i push one of the Buttons, the System doesn't recognize it.
phizy said:
Hi, how did you installed it?
I've tried it with the magisk Apps, but the Status in Viper ist Unnormal/Abnormal. So i can't really change a lot of settings. Also the App doesn't start automatically after reboot.
Is there a way to install Apps/Mods with Magisk, where the program need me to touch a Volume Buttons? If i push one of the Buttons, the System doesn't recognize it.
Click to expand...
Click to collapse
Hi,
This one works flawlessly V4A 2.3.4.0 Magisk Module
GitHub - jadilson12/Viper4Android-presets: This repository finds a collection of preset for viper4android 2.7+
This repository finds a collection of preset for viper4android 2.7+ - GitHub - jadilson12/Viper4Android-presets: This repository finds a collection of preset for viper4android 2.7+
github.com
phizy said:
Hi, how did you installed it?
I've tried it with the magisk Apps, but the Status in Viper ist Unnormal/Abnormal. So i can't really change a lot of settings. Also the App doesn't start automatically after reboot.
Is there a way to install Apps/Mods with Magisk, where the program need me to touch a Volume Buttons? If i push one of the Buttons, the System doesn't recognize it.
Click to expand...
Click to collapse
Android version?
If 10+, for install, you'll have to install selinux permissive script for Magisk, than after reboot, simply download v4a.apk (not magisk module) and install it. Start it, allow to install driver, auto-reboot, profit.
If still not working - check "legacy mode" in v4a settings. Should work.
*OP 7T PRO McLaren, i trying a few ways to install v4a as magisk module, trying different patches, fixes in various combinations. Finally, download .apk separately, it work.
MajinBoo17 said:
Hey,
I'm using Viper4Android 2.3.4.0
My settings are:
Lock effect mode -> headset
headset tab:
MASTER POWER
Enable ----- Tick
PLAYBACK GAIN CONTROL ( That is turn off/disabled)
Enable----- no tick
Select effect strength- Slight
Max Gain--- 4x
Max Output--- - 1.9 dB
FIREQUALIZER ( That is turn off/disabled)
Enable---- no tick
Select Preset- Custom
CONVOLVER
Enable--- tick
Impulse response--- Dolby Pro Logic II.irs
Cross Channel--- 0%
FIELD SURROUND and DIFFERENTIAL SURROUND ( That is turn off/disabled)
HEADPHONE SURROUND ( That is turn off/disabled)
Enable--- no tick
Select effect level--- Level 2
REVERVERATION ( That is turn off/disabled)
Leave default
DYNAMIC SYSTEM ( That is turn off/disabled)
Enable--- no Tick
Select listening device--- Common earphone V2
Select Dynamic Bass-- 0
TUBE SIMULATOR ( That is turn off/disabled)
FIDELITY CONTROL
Enable Viper Bass--- no Tick
Select Bass Mode--- Natural Bass
Select Bass frequency--- 60 Hz
Select Bass Boost-- 10 dB
Enable Viper Clarity--- Tick
Select Clarity Mode--- Natural
Select Clarity--- 3,5db
AUDITORY SYSTEM PROTECTION (optional. Test and select according to your preference)
Enable---- Tick
Select Binaural Level--- moderate
MASTER GATE ( That is turn off/disabled)
enjoy
Click to expand...
Click to collapse
man you're a sound engineer or what it's crazy how the audio output is perfect I hear all the details of my music this really great thank you
Eyeugwati said:
man you're a sound engineer or what it's crazy how the audio output is perfect I hear all the details of my music this really great thank you
Click to expand...
Click to collapse
You're welcome
Despite I am running unrooted custom ROM, with limited set up I could get on the viper4android 2.7.2.1 still blast well for me. Thanks a bunch
Guys thanks for sharing. I tried Dolby from Jadilson's awesome list (this guy made a f...ing work wow)
Dolby mod is EXCELLENT , its a must "try, hear and enjoy "
The only problem is GPS sound (waze or radar alerts) are not working anymore. I must disable V4A to hear waze again
[Edit] I'm stupid, just forgot to tick "compatibility mode" and all is top
Hey man maybe you can help me
I need a magisk flashable batch script for changing / replacing a value in many xml files per batch i wont to help the guys from viper4android maybe you know the tool following operations : open file - jump to row / string - read value - calculate new value - write value - save file - jump to next xml and so on.
Description : The values for surround section changed from 120 - 0 130 - 1 140 - 2 150 -3 160 - 4 170 -5 and so on until 8 old values : 120- 200 new values 0- 8
Maybe you can help me with this many people would be happy to solve the wrong conversion issue of viper4 Android presets or maybevyou know somebody
V4A version:
- 2.7.2.1
input files attached below...
ViPER-DC
- Beats by Dr.Dre Heartbeats 2.0 by Lady Gaga
Spectrum extension
- 100 % for any mp3s
Convolver
- TubeAmplifier & Technics Preamp Extreme v.2
Dynamic system
- Unknown Type 3
- 34 %
Tube simulator
- on
ViPER bass
- Subwoofer
- 34 HZ
- 13 dB
ViPER clarity
- XHiFi
- 8 dB
all the others, except MASTER LIMITER are off ;<)
have a nice hearing sessions
_sh3d_ said:
V4A version:
- 2.7.2.1
input files attached below...
ViPER-DC
- Beats by Dr.Dre Heartbeats 2.0 by Lady Gaga
Spectrum extension
- 100 % for any mp3s
Convolver
- TubeAmplifier & Technics Preamp Extreme v.2
Dynamic system
- Unknown Type 3
- 34 %
Tube simulator
- on
ViPER bass
- Subwoofer
- 34 HZ
- 13 dB
ViPER clarity
- XHiFi
- 8 dB
all the others, except MASTER LIMITER are off ;<)
have a nice hearing sessions
Click to expand...
Click to collapse
this is really good bro..thank you so much.
i really like this.