i started this thread to get people attention to this problem,we have very good camera 720p videos are preaty good,but sound recording is horrible,this is video recorded by me on live event in Belgrade arena,content is not important.you can hear how much sound is dissorted.
Link:
http://www.youtube.com/watch?v=93EtH2BsIvc&feature=plcp
Anyone had any solutions for this?
xGiox said:
i started this thread to get people attention to this problem,we have very good camera 720p videos are preaty good,but sound recording is horrible,this is video recorded by me on live event in Belgrade arena,content is not important.you can hear how much sound is dissorted.
Link:
http://www.youtube.com/watch?v=93EtH2BsIvc&feature=plcp
Anyone had any solutions for this?
Click to expand...
Click to collapse
its a live event.. huge speakers..!!! Distortion is natural..!!! logic i suppose...
check galaxy s with and without voodoo sound you will hear the diff,i know our phone doesn't support it,still i find sound recorded really high,if we could make it quieter.
I just found the answer on Samfirmware.com
But there's Camera Volume, so this seems a chance as any...
fair chance that RCV might refer to ReCordingVolume
Samsung phones.
Dial *#6984125*#
Test menu dial *#9072641*# (You need this one i think.)
Click 5 Audio - 2 AP volume config
Now you see zie je 4 things:
1 RCV config
2 EAR config
3 SPK config
4 BTH config
Now you see this:
1 MP volume
2 Keytone volume
3 Ringtone volume
4 Rec volume
5 FM radio volume
6 Camera volume
7 Voice call volume
8 Vt call volume
9 Voice memo volume
( SPK = Speaker )( Ear = Headset )
Tune Headset volume:
*#9072641*# - 2 EAR config - 3 Ringtone volume - Stap 6 tune it to 10
Tune movie volume:
*#9072641*# - 3 SPK config - 3 Ringtone volume - Stap 6 tune it to 10
Note it works but don't forget to type somewhere your old settings.
I COPIED IT... u can try anyways..
after i do *#6984125*# what i must do?? i don t understand well... i m traying to do this *#6984125*#>menu key>key input>*#9072641*.... but doesn t work
Try this mod
http://forum.xda-developers.com/showthread.php?t=1453547
geekynoob said:
I just found the answer on Samfirmware.com
But there's Camera Volume, so this seems a chance as any...
fair chance that RCV might refer to ReCordingVolume
Samsung phones.
Dial *#6984125*#
Test menu dial *#9072641*# (You need this one i think.)
Click 5 Audio - 2 AP volume config
Now you see zie je 4 things:
1 RCV config
2 EAR config
3 SPK config
4 BTH config
Now you see this:
1 MP volume
2 Keytone volume
3 Ringtone volume
4 Rec volume
5 FM radio volume
6 Camera volume
7 Voice call volume
8 Vt call volume
9 Voice memo volume
( SPK = Speaker )( Ear = Headset )
Tune Headset volume:
*#9072641*# - 2 EAR config - 3 Ringtone volume - Stap 6 tune it to 10
Tune movie volume:
*#9072641*# - 3 SPK config - 3 Ringtone volume - Stap 6 tune it to 10
Note it works but don't forget to type somewhere your old settings.
I COPIED IT... u can try anyways..
Click to expand...
Click to collapse
mhm when i try *#9072641*# nothing happens the other one opens servicemod but its empty,i know how to work in it i changed some values before of headset sound.now its just empty no option idk why. anyway you could try it your self if you put your phone close to your home speakers and let them run loud it will be same as live event.
Hey guys,
Im using stock rom of JB V 4.1.1.... I messed up with the engineering mode in headset n loud speaker, could anyone please help me with the default values for the same ...would really appreciate it, the main problem here is the headset volume at 0 stays nil(no sound) and the volume from 1-7 remains constant there is no diminishing of sound or increase in anyway.....
[email protected] said:
Hey guys,
Im using stock rom of JB V 4.1.1.... I messed up with the engineering mode in headset n loud speaker, could anyone please help me with the default values for the same ...would really appreciate it, the main problem here is the headset volume at 0 stays nil(no sound) and the volume from 1-7 remains constant there is no diminishing of sound or increase in anyway.....
Click to expand...
Click to collapse
I think the default is 128-150 for sound. Not sure.
Normal Mode
FIR 0
Type - Sip
Level 0
Valve - 108
Max Vol. - 128 (make it 150)
Headset Mode
FIR 0
Type - Sip
Level 0
Valve - 108
Max Vol. - 148
LDspeaker Mode
FIR 0
Type - Ring
Level 0
Valve - 140
Max Vol. - 128 (Make it 150)
1. engineer mode --> engineer mode (mtk) --> Hardware Testing tab --> Audio --> Normal Mode
2. select [sph]
3. changed:
lvl 6 = 155 (was 136)
lvl 5 = 140 (was 124)
lvl 4 = 125 (was 112)
lvl 3 = 110 (was 100)
lvl 2 = 100 (was 88)
lvl 1 = 86 (was 76)
lvl 0 = 75 (was 64)
4. Back to Speech Enhancement > changed Common Parametre to Normal Mode
5. Selected parametre 7, set to 96 (was 64)
6. selected parametre 6, set to 300 (was 400), supposedly adds a bit more bass to the audio
done !!!
significant volume boost during calls and it sounds more natural
My engineering mode in audio doesn't have normal mode unless you mean system. In audio enhancements is the same. In audio it doesn't have sph in any of the drop down menue. I tried these settings and it will not accept them
Hello All,
prerequisites:-
SuperRoot / Magisk Root
Root explorer like solid, es explorer
This mod actually removes the limitation in built-in amplifier in DAC.
Go to Root->System->Etc->mixer_gains.xml
Go and make changes as shown below
<patch name = "gain-media-headset">
<ctrl name = "HPOUT2L Impedance Volume" value = "123" />
<ctrl name = "HPOUT2L Input 1 Volume" value = "36" />
<ctrl name = "HPOUT2R Input 1 Volume" value = "36" />
Save & Reboot
This Mod actually disable powersaving mode
Go to Root->System->Etc->sapa_feature.xml
Go and make changes as shown below
<support name = "support_powersaving_mode" value = "false" />
Save & Reboot
Finally, Download & Install latest Poweramp Beta (with HD HI-Res output support)
Credit to JaguarSergio
Tried it and from what I can tell it only increases the max volume, not amplifies it. It's even called "gain-media-headset".
HPOUT2L is increased while the right channel is not which means if you want to do this you need to set HPOUT2R to the same volume. The powersaving did nothing at all during my testing and i tried with 1000kbps tracks through poweramp.
Hey,
Can you share your car audio profiles?
Recently I have Viper4Android and I do not understand many settings. I know it's often a matter of taste and audio equipment, but maybe there will be some nice setup.
Finally, the question is, is it possible to make Viper4Android work for FM radio as well? Are all the settings that will work only in the phone speaker tab?
Hey,
I'm using Viper4Android 2.3.4.0
My settings are:
Lock effect mode -> headset
headset tab:
MASTER POWER
Enable ----- Tick
PLAYBACK GAIN CONTROL ( That is turn off/disabled)
Enable----- no tick
Select effect strength- Slight
Max Gain--- 4x
Max Output--- - 1.9 dB
FIREQUALIZER ( That is turn off/disabled)
Enable---- no tick
Select Preset- Custom
CONVOLVER
Enable--- tick
Impulse response--- Dolby Pro Logic II.irs
Cross Channel--- 0%
FIELD SURROUND and DIFFERENTIAL SURROUND ( That is turn off/disabled)
HEADPHONE SURROUND ( That is turn off/disabled)
Enable--- no tick
Select effect level--- Level 2
REVERVERATION ( That is turn off/disabled)
Leave default
DYNAMIC SYSTEM ( That is turn off/disabled)
Enable--- no Tick
Select listening device--- Common earphone V2
Select Dynamic Bass-- 0
TUBE SIMULATOR ( That is turn off/disabled)
FIDELITY CONTROL
Enable Viper Bass--- no Tick
Select Bass Mode--- Natural Bass
Select Bass frequency--- 60 Hz
Select Bass Boost-- 10 dB
Enable Viper Clarity--- Tick
Select Clarity Mode--- Natural
Select Clarity--- 3,5db
AUDITORY SYSTEM PROTECTION (optional. Test and select according to your preference)
Enable---- Tick
Select Binaural Level--- moderate
MASTER GATE ( That is turn off/disabled)
enjoy
Hi, how did you installed it?
I've tried it with the magisk Apps, but the Status in Viper ist Unnormal/Abnormal. So i can't really change a lot of settings. Also the App doesn't start automatically after reboot.
Is there a way to install Apps/Mods with Magisk, where the program need me to touch a Volume Buttons? If i push one of the Buttons, the System doesn't recognize it.
phizy said:
Hi, how did you installed it?
I've tried it with the magisk Apps, but the Status in Viper ist Unnormal/Abnormal. So i can't really change a lot of settings. Also the App doesn't start automatically after reboot.
Is there a way to install Apps/Mods with Magisk, where the program need me to touch a Volume Buttons? If i push one of the Buttons, the System doesn't recognize it.
Click to expand...
Click to collapse
Hi,
This one works flawlessly V4A 2.3.4.0 Magisk Module
GitHub - jadilson12/Viper4Android-presets: This repository finds a collection of preset for viper4android 2.7+
This repository finds a collection of preset for viper4android 2.7+ - GitHub - jadilson12/Viper4Android-presets: This repository finds a collection of preset for viper4android 2.7+
github.com
phizy said:
Hi, how did you installed it?
I've tried it with the magisk Apps, but the Status in Viper ist Unnormal/Abnormal. So i can't really change a lot of settings. Also the App doesn't start automatically after reboot.
Is there a way to install Apps/Mods with Magisk, where the program need me to touch a Volume Buttons? If i push one of the Buttons, the System doesn't recognize it.
Click to expand...
Click to collapse
Android version?
If 10+, for install, you'll have to install selinux permissive script for Magisk, than after reboot, simply download v4a.apk (not magisk module) and install it. Start it, allow to install driver, auto-reboot, profit.
If still not working - check "legacy mode" in v4a settings. Should work.
*OP 7T PRO McLaren, i trying a few ways to install v4a as magisk module, trying different patches, fixes in various combinations. Finally, download .apk separately, it work.
MajinBoo17 said:
Hey,
I'm using Viper4Android 2.3.4.0
My settings are:
Lock effect mode -> headset
headset tab:
MASTER POWER
Enable ----- Tick
PLAYBACK GAIN CONTROL ( That is turn off/disabled)
Enable----- no tick
Select effect strength- Slight
Max Gain--- 4x
Max Output--- - 1.9 dB
FIREQUALIZER ( That is turn off/disabled)
Enable---- no tick
Select Preset- Custom
CONVOLVER
Enable--- tick
Impulse response--- Dolby Pro Logic II.irs
Cross Channel--- 0%
FIELD SURROUND and DIFFERENTIAL SURROUND ( That is turn off/disabled)
HEADPHONE SURROUND ( That is turn off/disabled)
Enable--- no tick
Select effect level--- Level 2
REVERVERATION ( That is turn off/disabled)
Leave default
DYNAMIC SYSTEM ( That is turn off/disabled)
Enable--- no Tick
Select listening device--- Common earphone V2
Select Dynamic Bass-- 0
TUBE SIMULATOR ( That is turn off/disabled)
FIDELITY CONTROL
Enable Viper Bass--- no Tick
Select Bass Mode--- Natural Bass
Select Bass frequency--- 60 Hz
Select Bass Boost-- 10 dB
Enable Viper Clarity--- Tick
Select Clarity Mode--- Natural
Select Clarity--- 3,5db
AUDITORY SYSTEM PROTECTION (optional. Test and select according to your preference)
Enable---- Tick
Select Binaural Level--- moderate
MASTER GATE ( That is turn off/disabled)
enjoy
Click to expand...
Click to collapse
man you're a sound engineer or what it's crazy how the audio output is perfect I hear all the details of my music this really great thank you
Eyeugwati said:
man you're a sound engineer or what it's crazy how the audio output is perfect I hear all the details of my music this really great thank you
Click to expand...
Click to collapse
You're welcome
Despite I am running unrooted custom ROM, with limited set up I could get on the viper4android 2.7.2.1 still blast well for me. Thanks a bunch
Guys thanks for sharing. I tried Dolby from Jadilson's awesome list (this guy made a f...ing work wow)
Dolby mod is EXCELLENT , its a must "try, hear and enjoy "
The only problem is GPS sound (waze or radar alerts) are not working anymore. I must disable V4A to hear waze again
[Edit] I'm stupid, just forgot to tick "compatibility mode" and all is top
Hey man maybe you can help me
I need a magisk flashable batch script for changing / replacing a value in many xml files per batch i wont to help the guys from viper4android maybe you know the tool following operations : open file - jump to row / string - read value - calculate new value - write value - save file - jump to next xml and so on.
Description : The values for surround section changed from 120 - 0 130 - 1 140 - 2 150 -3 160 - 4 170 -5 and so on until 8 old values : 120- 200 new values 0- 8
Maybe you can help me with this many people would be happy to solve the wrong conversion issue of viper4 Android presets or maybevyou know somebody
V4A version:
- 2.7.2.1
input files attached below...
ViPER-DC
- Beats by Dr.Dre Heartbeats 2.0 by Lady Gaga
Spectrum extension
- 100 % for any mp3s
Convolver
- TubeAmplifier & Technics Preamp Extreme v.2
Dynamic system
- Unknown Type 3
- 34 %
Tube simulator
- on
ViPER bass
- Subwoofer
- 34 HZ
- 13 dB
ViPER clarity
- XHiFi
- 8 dB
all the others, except MASTER LIMITER are off ;<)
have a nice hearing sessions
_sh3d_ said:
V4A version:
- 2.7.2.1
input files attached below...
ViPER-DC
- Beats by Dr.Dre Heartbeats 2.0 by Lady Gaga
Spectrum extension
- 100 % for any mp3s
Convolver
- TubeAmplifier & Technics Preamp Extreme v.2
Dynamic system
- Unknown Type 3
- 34 %
Tube simulator
- on
ViPER bass
- Subwoofer
- 34 HZ
- 13 dB
ViPER clarity
- XHiFi
- 8 dB
all the others, except MASTER LIMITER are off ;<)
have a nice hearing sessions
Click to expand...
Click to collapse
this is really good bro..thank you so much.
i really like this.