This is a thread for installing TWRP on the HTC 5G Hub
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This twrp was made for the Sprint variant but supports the Telstra variant as well.
Download:
TWRP 3.4.0-0: Here
Steps to install TWRP
First of all, you will be required to unlock your bootloader.
Activate OEM Unlocking in developer settings
Activate USB debugging in developer settings
Go to HTCDev to unlock your bootloader (Select the option at the bottom of the device list "All other supported devices")
Follow the instructions to unlock your bootloader. THIS WILL WIPE YOUR DEVICE!!!
Once you are finished unlocking the bootloader boot into the bootloader and run the following command to load twrp:
Code:
fastboot boot twrp-3.4.0-rtxspr.img
From twrp you can flash magisk or anything else you would like too.
Some things that are useful:
The pinhole button on the back is a vol - key so with that and the power button you can force restart or boot to recovery.
The device is A/B for partitions.
Screenshot:
Spoiler
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Have Fun!
deadman96385 said:
This is a thread for installing TWRP on the HTC 5G Hub
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This twrp was made for the Sprint variant, and is untested on other variants it may or may not work on those.
Download:
TWRP 3.4.0-0: Here
Steps to install TWRP
First of all, you will be required to unlock your bootloader.
Activate OEM Unlocking in developer settings
Activate USB debugging in developer settings
Go to HTCDev to unlock your bootloader
Follow the instructions to unlock your bootloader. THIS WILL WIPE YOUR DEVICE!!!
Once you are finished unlocking the bootloader boot into the bootloader and run the following command to load twrp:
Code:
fastboot boot recovery twrp-3.4.0-rtxspr.img
From twrp you can flash magisk or anything else you would like too.
Some things that are useful:
The pinhole button on the back is a vol - key so with that and the power button you can force restart or boot to recovery.
The device is A/B for partitions.
Screenshot:
Spoiler
Have Fun!
Click to expand...
Click to collapse
I was waiting for TWRP, is will work for Telstra (Autralia) HTC 5G HUB as well?
sfhkorea said:
I was waiting for TWRP, is will work for Telstra (Autralia) HTC 5G HUB as well?
Click to expand...
Click to collapse
It was confirmed to me privately that the Telstra variant is also supported.
deadman96385 said:
This is a thread for installing TWRP on the HTC 5G Hub
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This twrp was made for the Sprint variant but supports the Telstra variant as well.
Download:
TWRP 3.4.0-0: Here
Steps to install TWRP
First of all, you will be required to unlock your bootloader.
Activate OEM Unlocking in developer settings
Activate USB debugging in developer settings
Go to HTCDev to unlock your bootloader
Follow the instructions to unlock your bootloader. THIS WILL WIPE YOUR DEVICE!!!
Once you are finished unlocking the bootloader boot into the bootloader and run the following command to load twrp:
Code:
fastboot boot recovery twrp-3.4.0-rtxspr.img
From twrp you can flash magisk or anything else you would like too.
一些有用的东西:
背面的针孔按钮是一个 vol 键, 所以与它和电源按钮, 你可以强制重新启动或启动恢复.
设备为分区的 A/B。
截图:
[破坏者][/扰流器]
玩得愉快!
[/报价]
你好!你能寄给我一份系统备份的副本吗?我的设备崩溃了非常感谢!
Click to expand...
Click to collapse
你好!你能寄给我一份系统备份的副本吗?我的设备崩溃了非常感谢!
thank you , i try to use your command in bootloader
Code:
fastboot boot recovery twrp-3.4.0-rtxspr.img
but its not working
Code:
fastboot: error: cannot load 'recovery': No such file or directory
i try to use the command without recovery
Code:
fastboot boot twrp-3.4.0-rtxspr.img
its open twrp but i cant install any zip .
is there a way to install twrp to flash magisk
i did everything but still twrp to install magisk
benhomran said:
thank you , i try to use your command in bootloader
Code:
fastboot boot recovery twrp-3.4.0-rtxspr.img
but its not working
Code:
fastboot: error: cannot load 'recovery': No such file or directory
i try to use the command without recovery
Code:
fastboot boot twrp-3.4.0-rtxspr.img
its open twrp but i cant install any zip .
is there a way to install twrp to flash magisk
i did everything but still twrp to install magisk
Click to expand...
Click to collapse
I fixed the typo in the OP sorry about that, what error are you getting when installing a zip? I was able to flash magisks just fine when I rooted mine.
deadman96385 said:
This is a thread for installing TWRP on the HTC 5G Hub
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This twrp was made for the Sprint variant but supports the Telstra variant as well.
Download:
TWRP 3.4.0-0: Here
Steps to install TWRP
First of all, you will be required to unlock your bootloader.
Activate OEM Unlocking in developer settings
Activate USB debugging in developer settings
Go to HTCDev to unlock your bootloader (Select the option at the bottom of the device list "All other supported devices")
Follow the instructions to unlock your bootloader. THIS WILL WIPE YOUR DEVICE!!!
Once you are finished unlocking the bootloader boot into the bootloader and run the following command to load twrp:
Code:
fastboot boot twrp-3.4.0-rtxspr.img
From twrp you can flash magisk or anything else you would like too.
Some things that are useful:
The pinhole button on the back is a vol - key so with that and the power button you can force restart or boot to recovery.
The device is A/B for partitions.
Screenshot:
Spoiler
Have Fun!
Click to expand...
Click to collapse
hi,
i wanted to root my Htc 5G hub (Telstra)
before i try to install twrp, i need some info.
once i downloaded the twrp, do i save it in the pc or on a sd card?
Also, where do i run the command in bootloader? is it through the pc or the device itself?
thanks.
twrp installed. but my screen is unresponsive. any fix?
i tried using usb mouse but wont work
I am stuck at” booting. . . .“
diemoon98 said:
I am stuck at” booting. . . .“
Click to expand...
Click to collapse
I suddenly succeeded
i got my device to boot twrp. but touchscreen doesnt work. plugging a mouse suddenly work but thats as far as it goes.
cant install magisk as in twrp wont read my sd card or internal storage unless i do a full reset. then im back to square one again lol
diemoon98 said:
I suddenly succeeded
Click to expand...
Click to collapse
I encountered the same problem, how did you solve it? THX!
It can't access internal storage and SD card unless I format data. Can I repair it?
Does anyone has a copy of the stock rom? Mine partition got wiped after installed the twrp from recovery.
Can someone give me a backup of the system?
我也需要一个系统ROM,谢谢!
liujuncdb said:
I encountered the same problem, how did you solve it? THX!
Click to expand...
Click to collapse
Same problem here
Using a HTC 5G hub from Telstra (Australia)
I played around with it again lastnight and finally managed to install magisk in twrp recovery.
Anyone can provide a stock rom or backup copy ?
My device was wiped
Related
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired. Please
* do some research if you have any concerns about features included in this Recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
INSTALLATION
Download recovery.
unlock oem in developer options in settings
reboot bootloader
calculate md5 of the serial number of device
Code:
fastboot oem key ef4de79290b861b54d6bc58b65ef42f1
in my case ef4de79290b861b54d6bc58b65ef42f1 was my md5 of serial number
Code:
fastboot oem unlock
Code:
fastboot flash recovery recovery.img
Reboot into recovery! Have fun!
DownloadsDownload https://www.androidfilehost.com/?fid=1322778262903986803
Thanks to
@yshalsager
[MENTION]HikariCalyx[/MENTION]
Created 2018-05-11
Last Updated 2018-05-11
Contributors
Source Code: https://github.com/TwrpBuilder/android_device_nokia_frt
XDA:DevDB Information
[RECOVERY][TWRP] TWRP 3.2.1 Nokia 1, ROM for the Nokia 1
Contributors
androidlover5842
ROM OS Version: 2.3.x Gingerbread
Version Information
Status: Testing
Created 2018-08-21
Last Updated 2018-08-21
Hi, I installed the twrp but I made the mistake of formatting the data and now it's in bootlop. Any help? thanks
I can't install with this tip.
My Nokia 1 work on 8.1 Oreo. I can't install twrp on my nokia with above 1st post.
Run adb devices -> worked.
Reboot recovery or bootloader -> worked, but not countinue command => not unlock oem with hash key.
Fastboot devices -> not worked (no list phone).
Help me plz.
Update driver for Fastboot and work.
Fastboot command not working
Didnt wanted to flash recovery rather boot with
Fastboot boot twrp.img
Command went well but on restarting twrp never came, instead booted in system. What could be the reason? Twrp bug?
Error
Do you have the file of this version TWRP-3.2.1-frt-20180506.img? The latest version TWRP-3.2.3-frt-20180802.img can’t install/flash any zip files.
Error:
“Checking for Digest files
Skipping Digest check: no digest file found”
Is it working on TA-1047 dual sim variant?
androidlover5842 said:
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired. Please
* do some research if you have any concerns about features included in this Recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
INSTALLATION
Download recovery.
unlock oem in developer options in settings
reboot bootloader
calculate md5 of the serial number of device
Code:
fastboot oem key ef4de79290b861b54d6bc58b65ef42f1
in my case ef4de79290b861b54d6bc58b65ef42f1 was my md5 of serial number
Code:
fastboot oem unlock
Code:
fastboot flash recovery recovery.img
Reboot into recovery! Have fun!
DownloadsDownload https://www.androidfilehost.com/?fid=1322778262903986803
Thanks to
@yshalsager
[MENTION]HikariCalyx[/MENTION]
Created 2018-05-11
Last Updated 2018-05-11
Contributors
Source Code: https://github.com/TwrpBuilder/android_device_nokia_frt
XDA:DevDB Information
[RECOVERY][TWRP] TWRP 3.2.1 Nokia 1, ROM for the Nokia 1
Contributors
androidlover5842
ROM OS Version: 2.3.x Gingerbread
Version Information
Status: Testing
Created 2018-08-21
Last Updated 2018-08-21
Click to expand...
Click to collapse
does this work for ta-1047 as well?
No, both TWRP recovery images not boot on TA-1047
Even latest factory boot.img and recovery.img are not available, so no way back when you try to flash it.
MioCZ said:
No, both TWRP recovery images not boot on TA-1047
Even latest factory boot.img and recovery.img are not available, so no way back when you try to flash it.
Click to expand...
Click to collapse
It worked for me but TWRP wants a pw.
What helped me was factory reset, then developer options activate unlock
then go fastboot.
no capatible twrp on nokia 1
anyone help please no twrp for nokia 1...
what about if i download twrp 3.0.1 should it work ?..
is there another method to root without custom recovery ?!!
please if you know help me
---------- Post added at 03:22 PM ---------- Previous post was at 03:15 PM ----------
because no twrp capatible with nokia 1 (ta-1047)
tsaber said:
It worked for me but TWRP wants a pw.
What helped me was factory reset, then developer options activate unlock
then go fastboot.
Click to expand...
Click to collapse
no capatible twrp on nokia 1
Naner8lo said:
Hi, I installed the twrp but I made the mistake of formatting the data and now it's in bootlop. Any help? thanks
Click to expand...
Click to collapse
Me too i have been installed the twrp on my phone (nokia 1 ta1047)
it work but when i boot into recovery it show me a message " password" and can't read phone storage , so i see some youtube videos about how to fix this problem after that m, i made the mistake by wiping data + cache...
after that the phone is blocked by google security (black screen).
Conclusion: TWRP 3.2.1 isn't an official recovery
Sadly no capatible TWRP on nokia 1 ?
Solution: i go to phones market and tell them about anything after that they give me a new phone.
Hi
Are there any plans to make this TWRP work with stock Pie? It doesn't seem to launch at the moment when the device is running Pie.
Understand it might be a challenge, just wondering if you were thinking of doing it.
My bad, it does work perfectly, you just need to find a way to flash it instead of using "fastboot boot" and you need to avoid the system replacing the recovery with stock on each boot.
After unlocked bootloader and installed TWRP phone gose to boot only TWRP!
Well... If we can install gsi roms using this recovery, this is a good recovery, but since I don't have a windows pc(to flash stock rom if something goes wrong) I didn't try, as soon as I get a windows pc on hand, I will downgrade to pie use a gsi...
Nope, gsi roms don't boot, I have Magisk installed by patching boot image and flashing it on android 10 go edition works, I'm just posting for info...
This is a thread for installing TWRP on the Umi A1 Pro
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Download:
TWRP 3.2.1-0: Here
Steps to install TWRP
First of all, you will be required to unlock your bootloader.
Activate OEM Unlocking in developer settings
Activate USB debugging in developer settings
Now, open a terminal, if on Linux, or command prompt if on windows, and enter the following:
Code:
adb reboot bootloader
Code:
fasboot oem unlock
Follow the onscreen instructions to unlock your bootloader. THIS WILL WIPE YOUR DEVICE!!!
Once this is complete, it will go back to the fastboot screen.
Now, from within your terminal/command prompt, navigate to the folder where you have downloaded the above recovery.img to.
Enter the following command once there:
Code:
fastboot flash recovery recovery.img
This will flash TWRP to your device, overwriting the stock recovery.
Once this is complete, there will be a screen telling you how long it took etc. Now you need to hold down your volume up button, and power button. Keep holding these until you reach the menu for recovery, fastboot or normal mode.
Select Recovery.
This will boot you into TWRP
You will have to go through the setup of the whole android system again, but its worth it you now have TWRP to install the Custom ROMs that will be coming shortly
Have Fun!
Is this twrp good for treble GSI install?
I'm assuming this TWRP doesn't have the encryption issue? The one I currently have keeps flagging for a password.
peetee0007 said:
I'm assuming this TWRP doesn't have the encryption issue? The one I currently have keeps flagging for a password.
Click to expand...
Click to collapse
This one is asking for password as well.
Does it actually work with your own password? Only way around it now is to wipe data and reboot into recovery before encryption takes place. Pain in the rear.
I can't get the Twrp flash to work. It stays with the old recovery mode no matter what.
Here's my story. I've managed to apply this correctly once to my phone before, but due to me messing around with system file I've soft-bricked my phone and had to flash the official stock rom for it, I picked the C390_FE_K8B_UMI_20180601_1838 cause "Hey, higher number should mean more recent." I'm not sure what was the version of the phone when it was brand new and now it seems that the phone is completely immune to rooting.
Any idea what I've might done wrong when unbricking my phone?
----------------------------------------------------------------------------------
I managed to get it to work again, turns out I had to let the wireless update take place, then after a couple fails with the "adb reboot bootloader" command I read the list of stuff that gets thrown into cmd when you just do adb. Reading the commands I saw a "adb reboot-bootloader" so I do that one, gets me to the fastboot screen and then I'm able to proceed along with the guide.
Moral: If you have to unbrick the phone by flashing the original rom into it, let the wireless update take place before attempting anything else with the phone.
Thanks for the twrp recovery, now I just gotta defeat the encryption.
Awesome work! How did you figure out how to get USB to work?
I will try this but can you share what custom roms can i use on this twrp/phone?
blitzlee06 said:
I will try this but can you share what custom roms can i use on this twrp/phone?
Click to expand...
Click to collapse
You can flash pretty much most of these GSI ROMs.
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
stevea76 said:
You can flash pretty much most of these GSI ROMs.
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
Click to expand...
Click to collapse
how to check if im using the right architecture and partition style?
blitzlee06 said:
how to check if im using the right architecture and partition style?
Click to expand...
Click to collapse
64-bit quad core, ARM Cortex-A53= arm64bit ,bbut doen'st mean camera or other feature will work out of the box...
Diomorgan said:
64-bit quad core, ARM Cortex-A53= arm64bit ,bbut doen'st mean camera or other feature will work out of the box...
Click to expand...
Click to collapse
how about the partition style?
blitzlee06 said:
how about the partition style?
Click to expand...
Click to collapse
Arm64 A only
Hello , This is a guide for Flashing TWRP and Flashing GSI (Treble ROMS) on Infinix Smart 3 Plus .
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
FLASHING TWRP
Pre-requisites
The main requirement before you can have this recovery on your Infinix X627 is that the bootloader MUST be unlocked. In addition, make sure you have ADB and FASTBOOT set up correctly on your PC.
N/B : Make sure you've the latest ADB & FASTBOOT Installed .
INSTALLATION INSTRUCTIONS
Download this Infinix-X627-TWRP-V2.img
Download this Vbmeta img
Boot your device into fastboot mode.
In the directory containing the recovery you downloaded, open up a CMD/PowerShell and run this command
Code:
fastboot flash recovery Infinix-X627-TWRP-V2.img
While in fastboot and run this command
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
After Flashing , Boot Into TWRP(recovery) (Power + Volume Up) to confirm that you have successfully flashed TWRP on your Infinix Smart 3 Plus
Incase you are asked for the password to decrypt your device, just ignore that step, go to the Wipe Menu and Format Data. This process will wipe all your data so make a point of backing up your important data.
yeahhh we have twrp
djancuuk said:
Click to expand...
Click to collapse
Which TWRP do you mean ?
Flashing ROMs tutorial coming soon
Thanks
majorkid said:
Flashing ROMs tutorial coming soon
Click to expand...
Click to collapse
AT Last Infinix Smart 3 PLUS Have TWRP.
I Was Waiting For This Recovery From past 5 months!
Thanks A Lot XDA And Its Developers Specially Include Who Made This Possible.
Many Major Problems!!!!
majorkid said:
Hello , This is a guide for Flashing TWRP and Flashing GSI (Treble ROMS) on Infinix Smart 3 Plus .
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
FLASHING TWRP
Pre-requisites
The main requirement before you can have this recovery on your Infinix X627 is that the bootloader MUST be unlocked. In addition, make sure you have ADB and FASTBOOT set up correctly on your PC.
N/B : Make sure you've the latest ADB & FASTBOOT Installed .
INSTALLATION INSTRUCTIONS
Download this Infinix-X627-TWRP-V2.img
Download this Vbmeta img
Boot your device into fastboot mode.
In the directory containing the recovery you downloaded, open up a CMD/PowerShell and run this command
Code:
fastboot flash recovery Infinix-X627-TWRP-V2.img
While in fastboot and run this command
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
After Flashing , Boot Into TWRP(recovery) (Power + Volume Up) to confirm that you have successfully flashed TWRP on your Infinix Smart 3 Plus
Incase you are asked for the password to decrypt your device, just ignore that step, go to the Wipe Menu and Format Data. This process will wipe all your data so make a point of backing up your important data.
Click to expand...
Click to collapse
I have found 4 Major problems
1:- unable to mount /data/media/twrp/.twrps
2:-After wipe and formate data then internal storage mounted but After reboot and set up the Phone Then TWRP again show Internal Storage (0MB).
3:-Un root in Advanced option not working and MTP also not working. /data and /root and other directories also not visible even all option are marked inside Mount button.
4:- Root install in Advanced option or latest Magisk flash able zip file and Superuser file successful installed but after reboot these apps APK are not present in Apps list. Phone also not rooting via Magisk Patched image.
Request:- Please solve these major issues.
Infinix smart 3 plus(X627) architecture is (ARM) and this Phone support treble Slot A but no one ARM(Slot A and AB) and ARM64(Slot A and AB) GSI image working.
There is no Mooke ROM available for this device.
Sir i request to you.
Sir please make a full stable and fast custom rom for infinix smart 3 plus..Thanks Nice Work...Gor TWRP...??:good:
pliz make infinix smart 3 plus custom rom
It's Working
Thank you so much Sir
Reboot Issue
After installing recovery whenever I reboots to system(sooner or later),your recovery gets wiped off. Is this usual or I am doing something wrong.
please make it for infinix smart4
---------- Post added at 04:54 PM ---------- Previous post was at 04:50 PM ----------
Please make twrp infinix smart4:بكاء:
Dear Sir,
Thank you so much for this recovery. Please make recovery of Infinix Hot 10 (x682). I really need this to flash Custom Roms and GSI.
I shall be very thankful to you.
Best Regards
Bilal Nawaz
Bilal nawaz said:
Dear Sir,
Thank you so much for this recovery. Please make recovery of Infinix Hot 10 (x682). I really need this to flash Custom Roms and GSI.
I shall be very thankful to you.
Best Regards
Bilal Nawaz
Click to expand...
Click to collapse
Any update?
mr.namansoni said:
Any update?
Click to expand...
Click to collapse
Here is complete method to Install GSI Rom without TWRP....
Bilal nawaz said:
Here is complete method to Install GSI Rom without TWRP....
Click to expand...
Click to collapse
yeah method is good. But i was talking about twrp. Have you got twrp for infinix hot 10
mr.namansoni said:
yeah method is good. But i was talking about twrp. Have you got twrp for infinix hot 10
Click to expand...
Click to collapse
I asked from him. He is saying TWRP recovery of Infinix Hot 10 will release soon
Bilal nawaz said:
I asked from him. He is saying TWRP recovery of Infinix Hot 10 will release soon
Click to expand...
Click to collapse
okay waiting for it
I bro.I have infinix smart 3 plus 2gb ram and 32 gb rom not 3 gb ram.Can i use these same files!?
Bilal nawaz said:
It's Working
Thank you so much Sir
Click to expand...
Click to collapse
is your smartphone working with that root method??Did you really try it?
majorkid said:
Hello , This is a guide for Flashing TWRP and Flashing GSI (Treble ROMS) on Infinix Smart 3 Plus .
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
FLASHING TWRP
Pre-requisites
The main requirement before you can have this recovery on your Infinix X627 is that the bootloader MUST be unlocked. In addition, make sure you have ADB and FASTBOOT set up correctly on your PC.
N/B : Make sure you've the latest ADB & FASTBOOT Installed .
INSTALLATION INSTRUCTIONS
Download this Infinix-X627-TWRP-V2.img
Download this Vbmeta img
Boot your device into fastboot mode.
In the directory containing the recovery you downloaded, open up a CMD/PowerShell and run this command
Code:
fastboot flash recovery Infinix-X627-TWRP-V2.img
While in fastboot and run this command
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
After Flashing , Boot Into TWRP(recovery) (Power + Volume Up) to confirm that you have successfully flashed TWRP on your Infinix Smart 3 Plus
Incase you are asked for the password to decrypt your device, just ignore that step, go to the Wipe Menu and Format Data. This process will wipe all your data so make a point of backing up your important data.
Click to expand...
Click to collapse
After installing this recovery, whenever I try flashing any zip, I always get same error. 2 section of red lines.
Same problem even for rooting using internal option.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team Win Recovery Project 3.x, or TWRP3.x for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
NOTE:
This Recovery is Built from sources. It's Not a Port. It is Tested and working fine.
INSTALLATION:
1. Download Recovery.img from below
2. boot into fastboot
3. Type these commands one by one:
"fastboot flash recovery recovery.img"
"fastboot oem reboot-recovery"
For Realme Ui android 10 download file ending with _10.img
Type these commands one by one:
"fastboot flash recovery recovery.img"
"fastboot reboot recovery"
DOWNLOADS:
TWRP
SOURCES:
TWRP
Device tree
BUGS:
NONE
Hit Thanks If You Liked My Work
After flashing twrp recovery realme c2 it's see sending recovery, writing recovery, finished recovery.when type next command fastboot oem reboot-recovery my phone boot my home screen.
Soumen Malik said:
After flashing twrp recovery realme c2 it's see sending recovery, writing recovery, finished recovery.when type next command fastboot oem reboot-recovery my phone boot my home screen.
Click to expand...
Click to collapse
Yess..same thing I am also experiencing...
SÀẞYÁSACHI said:
Yess..same thing I am also experiencing...
Click to expand...
Click to collapse
Soumen Malik said:
After flashing twrp recovery realme c2 it's see sending recovery, writing recovery, finished recovery.when type next command fastboot oem reboot-recovery my phone boot my home screen.
Click to expand...
Click to collapse
that depends upon your android version android 9 command doesnt work on a10 & android 10 command doesnt work on a9
Siddk said:
that depends upon your recovery version android 9 command doesnt work on a10 & android 10 command doesnt work on a9
Click to expand...
Click to collapse
Can you plz suggest me the commands through which I can install twrp in realme c2(android 9) rmx 1941...
Siddk said:
that depends upon your recovery version android 9 command doesnt work on a10 & android 10 command doesnt work on a9
Click to expand...
Click to collapse
I had followed all the steps guided by xda, and although and flashing, the results showed finished status, but after That I typed fastboot oem reboot-recovery, it booted to the homescreen directly...and then when I typed "adb reboot recovery" commands, it booted to the stock recovery... please help me
SÀẞYÁSACHI said:
I had followed all the steps guided by xda, and although and flashing, the results showed finished status, but after That I typed fastboot oem reboot-recovery, it booted to the homescreen directly...and then when I typed "adb reboot recovery" commands, it booted to the stock recovery... please help me
Click to expand...
Click to collapse
https://dl.twrp.me/RMX1941/twrp-3.5.0_9-0-RMX1941.img.html
download this & flash through fastboot then boot directly into recovery rebooting to system will revert the recovery
fastboot flash recovery filename.img
fastboot oem reboot-recovery
Siddk said:
https://dl.twrp.me/RMX1941/twrp-3.5.0_9-0-RMX1941.img.html
download this & flash through fastboot then boot directly into recovery rebooting to system will revert the recovery
fastboot flash recovery filename.img
fastboot oem reboot-recovery
Click to expand...
Click to collapse
Thanks, sir...it really worked...
is there any way to install TWRP in realme c2 permanently?
sir i need help twrp not showing up after i successfully flashed the .img file my device is realme c2 rmx 1941 (android 10)
i installed 3.5.1 & 3.5.2
this happened... both of them and whenever i boot to recovery its always realme ui recovery options...
nemesis1941 said:
sir i need help twrp not showing up after i successfully flashed the .img file my device is realme c2 rmx 1941 (android 10)
i installed 3.5.1 & 3.5.2
this happened... both of them and whenever i boot to recovery its always realme ui recovery options...
View attachment 5353883
Click to expand...
Click to collapse
this happened to me also. successful recovery flash, then error in fastboot reboot recovery. i also tried fastboot boot recovery.img, but no luck
any solution on how to fix this problem? @Siddk
nemesis1941 said:
patrickbusto081302 said:
this happened to me also. successful recovery flash, then error in fastboot reboot recovery. i also tried fastboot boot recovery.img, but no luck
any solution on how to fix this problem? @Siddk
Click to expand...
Click to collapse
sir i need help twrp not showing up after i successfully flashed the .img file my device is realme c2 rmx 1941 (android 10)
i installed 3.5.1 & 3.5.2
this happened... both of them and whenever i boot to recovery its always realme ui recovery options..
View attachment 5353883
Click to expand...
Click to collapse
minimal adb will not work with android 10 download tool from below
https://developer.android.com/studio/releases/platform-tools
thank you very much for the help man <3 it worked *3*
Siddk said:
minimal adb will not work with android 10 download tool from below
https://developer.android.com/studio/releases/platform-tools
Click to expand...
Click to collapse
Is this normal?
My Phone Screen Shows
OPPO Verify pass
fastboot unlock verify ok
Cjhay29 said:
Is this normal?
My Phone Screen Shows
OPPO Verify pass
fastboot unlock verify ok
Click to expand...
Click to collapse
Also I have a question
When using volume down + power button it goes into bootloader instead of recovery. Is that normal?
By the way I already unlock the bootloader
Last question
When I already flashed the twrp can I use power button + volume down?
And it is permanently installed?
Cjhay29 said:
Last question
When I already flashed the twrp can I use power button + volume down?
And it is permanently installed?
Click to expand...
Click to collapse
Oppo verify is fastboot screen
No key to boot into recovery directly Blame realme for that
you need to boot into fastboot first then recovery or via magisk manager
Hi,can you help me.. After I reboot using command adb reboot bootloader..it stuck at 'oppo verify pass fastboot_unlock_verify_ok' .. and then I enter fastboot reboot command,and it says waiting for any devices.. I've unlock oem and usb debugging already..
Cjhay29 said:
Also I have a question
When using volume down + power button it goes into bootloader instead of recovery. Is that normal?
By the way I already unlock the bootloader
Click to expand...
Click to collapse
may I know how you unlock the bootloader
I want to flash this https://forum.xda-developers.com/t/...ab-arm-arm32binder64-updt-2019-09-14.3930030/
But after I uninstalled Magisk. The twrp is being replaced by stock recovery?
This is twrp
https://androidfilehost.com/?fid=6006931924117921836
I think my phone ( Moto G6 Play) is required root for twrp to survive.
But the GSI rom requires to remove Magisk which would also unroot the phone --> remove twrp.
I'm so confused.
Here the guide that I used to install twrp:
[guide] [root] [oreo&pie] [jeter/aljeter] [twrp, decrypt, magisk] [stock firmware]
* Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, fires, rigged elections, ligma, * thermonuclear war, or your mom getting upset with you for being on the computer all day Please * Ensure you have an...
forum.xda-developers.com
you could ask in the TWRP thread if you have trouble installing TWRP without Magisk. that is where the instructions are written, and I am pretty sure you doing it wrong.
stock recovery is restored on each boot, it is the same behaviour of almost all stock ROMs. although the mechanism differs. in the past days it was easy just rename /system/recovery-from-boot.p but I don't know about Moto. once you flashed GSI that file won't exist anymore anyway.
G6 Play Unofficial TWRP (xt1922-X)
Unofficial TWRP Instructions: 1. Enable OEM unlocking in the developer options, then unlock your bootloader. Motorola Bootloader Unlock. 2. Install minimal adb and fastboot. I recommend using the portable version. Minimal ADB. 3. Download...
forum.xda-developers.com