Database Info

[RECOVERY][TWRP] TWRP 3.2.1 Nokia 1

Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired. Please
* do some research if you have any concerns about features included in this Recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
INSTALLATION
Download recovery.
unlock oem in developer options in settings
reboot bootloader
calculate md5 of the serial number of device
Code:
fastboot oem key ef4de79290b861b54d6bc58b65ef42f1
in my case ef4de79290b861b54d6bc58b65ef42f1 was my md5 of serial number
Code:
fastboot oem unlock
Code:
fastboot flash recovery recovery.img
Reboot into recovery! Have fun!
Downloads​Download https://www.androidfilehost.com/?fid=1322778262903986803
Thanks to
@yshalsager
[MENTION]HikariCalyx[/MENTION]
Created 2018-05-11
Last Updated 2018-05-11
Contributors
Source Code: https://github.com/TwrpBuilder/android_device_nokia_frt
XDA:DevDB Information
[RECOVERY][TWRP] TWRP 3.2.1 Nokia 1, ROM for the Nokia 1
Contributors
androidlover5842
ROM OS Version: 2.3.x Gingerbread
Version Information
Status: Testing
Created 2018-08-21
Last Updated 2018-08-21

Hi, I installed the twrp but I made the mistake of formatting the data and now it's in bootlop. Any help? thanks

I can't install with this tip.
My Nokia 1 work on 8.1 Oreo. I can't install twrp on my nokia with above 1st post.
Run adb devices -> worked.
Reboot recovery or bootloader -> worked, but not countinue command => not unlock oem with hash key.
Fastboot devices -> not worked (no list phone).
Help me plz.

Update driver for Fastboot and work.

Fastboot command not working
Didnt wanted to flash recovery rather boot with
Fastboot boot twrp.img
Command went well but on restarting twrp never came, instead booted in system. What could be the reason? Twrp bug?

Error
Do you have the file of this version TWRP-3.2.1-frt-20180506.img? The latest version TWRP-3.2.3-frt-20180802.img can’t install/flash any zip files.
Error:
“Checking for Digest files
Skipping Digest check: no digest file found”

Is it working on TA-1047 dual sim variant?
androidlover5842 said:
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired. Please
* do some research if you have any concerns about features included in this Recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
INSTALLATION
Download recovery.
unlock oem in developer options in settings
reboot bootloader
calculate md5 of the serial number of device
Code:
fastboot oem key ef4de79290b861b54d6bc58b65ef42f1
in my case ef4de79290b861b54d6bc58b65ef42f1 was my md5 of serial number
Code:
fastboot oem unlock
Code:
fastboot flash recovery recovery.img
Reboot into recovery! Have fun!
Downloads​Download https://www.androidfilehost.com/?fid=1322778262903986803
Thanks to
@yshalsager
[MENTION]HikariCalyx[/MENTION]
Created 2018-05-11
Last Updated 2018-05-11
Contributors
Source Code: https://github.com/TwrpBuilder/android_device_nokia_frt
XDA:DevDB Information
[RECOVERY][TWRP] TWRP 3.2.1 Nokia 1, ROM for the Nokia 1
Contributors
androidlover5842
ROM OS Version: 2.3.x Gingerbread
Version Information
Status: Testing
Created 2018-08-21
Last Updated 2018-08-21
Click to expand...
Click to collapse
does this work for ta-1047 as well?

No, both TWRP recovery images not boot on TA-1047
Even latest factory boot.img and recovery.img are not available, so no way back when you try to flash it.

MioCZ said:
No, both TWRP recovery images not boot on TA-1047
Even latest factory boot.img and recovery.img are not available, so no way back when you try to flash it.
Click to expand...
Click to collapse
It worked for me but TWRP wants a pw.
What helped me was factory reset, then developer options activate unlock
then go fastboot.

no capatible twrp on nokia 1
anyone help please no twrp for nokia 1...
what about if i download twrp 3.0.1 should it work ?..
is there another method to root without custom recovery ?!!
please if you know help me
---------- Post added at 03:22 PM ---------- Previous post was at 03:15 PM ----------
because no twrp capatible with nokia 1 (ta-1047)
tsaber said:
It worked for me but TWRP wants a pw.
What helped me was factory reset, then developer options activate unlock
then go fastboot.
Click to expand...
Click to collapse

no capatible twrp on nokia 1
Naner8lo said:
Hi, I installed the twrp but I made the mistake of formatting the data and now it's in bootlop. Any help? thanks
Click to expand...
Click to collapse
Me too i have been installed the twrp on my phone (nokia 1 ta1047)
it work but when i boot into recovery it show me a message " password" and can't read phone storage , so i see some youtube videos about how to fix this problem after that m, i made the mistake by wiping data + cache...
after that the phone is blocked by google security (black screen).
Conclusion: TWRP 3.2.1 isn't an official recovery
Sadly no capatible TWRP on nokia 1 ?
Solution: i go to phones market and tell them about anything after that they give me a new phone.

Hi
Are there any plans to make this TWRP work with stock Pie? It doesn't seem to launch at the moment when the device is running Pie.
Understand it might be a challenge, just wondering if you were thinking of doing it.
My bad, it does work perfectly, you just need to find a way to flash it instead of using "fastboot boot" and you need to avoid the system replacing the recovery with stock on each boot.

After unlocked bootloader and installed TWRP phone gose to boot only TWRP!

Well... If we can install gsi roms using this recovery, this is a good recovery, but since I don't have a windows pc(to flash stock rom if something goes wrong) I didn't try, as soon as I get a windows pc on hand, I will downgrade to pie use a gsi...

Nope, gsi roms don't boot, I have Magisk installed by patching boot image and flashing it on android 10 go edition works, I'm just posting for info...

TWRP for Umidigi A1 Pro

This is a thread for installing TWRP on the Umi A1 Pro
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Download:
TWRP 3.2.1-0: Here
Steps to install TWRP
First of all, you will be required to unlock your bootloader.
Activate OEM Unlocking in developer settings
Activate USB debugging in developer settings
Now, open a terminal, if on Linux, or command prompt if on windows, and enter the following:
Code:
adb reboot bootloader
Code:
fasboot oem unlock
Follow the onscreen instructions to unlock your bootloader. THIS WILL WIPE YOUR DEVICE!!!
Once this is complete, it will go back to the fastboot screen.
Now, from within your terminal/command prompt, navigate to the folder where you have downloaded the above recovery.img to.
Enter the following command once there:
Code:
fastboot flash recovery recovery.img
This will flash TWRP to your device, overwriting the stock recovery.
Once this is complete, there will be a screen telling you how long it took etc. Now you need to hold down your volume up button, and power button. Keep holding these until you reach the menu for recovery, fastboot or normal mode.
Select Recovery.
This will boot you into TWRP
You will have to go through the setup of the whole android system again, but its worth it you now have TWRP to install the Custom ROMs that will be coming shortly
Have Fun!

Is this twrp good for treble GSI install?

I'm assuming this TWRP doesn't have the encryption issue? The one I currently have keeps flagging for a password.

peetee0007 said:
I'm assuming this TWRP doesn't have the encryption issue? The one I currently have keeps flagging for a password.
Click to expand...
Click to collapse
This one is asking for password as well.

Does it actually work with your own password? Only way around it now is to wipe data and reboot into recovery before encryption takes place. Pain in the rear.

I can't get the Twrp flash to work. It stays with the old recovery mode no matter what.
Here's my story. I've managed to apply this correctly once to my phone before, but due to me messing around with system file I've soft-bricked my phone and had to flash the official stock rom for it, I picked the C390_FE_K8B_UMI_20180601_1838 cause "Hey, higher number should mean more recent." I'm not sure what was the version of the phone when it was brand new and now it seems that the phone is completely immune to rooting.
Any idea what I've might done wrong when unbricking my phone?
----------------------------------------------------------------------------------
I managed to get it to work again, turns out I had to let the wireless update take place, then after a couple fails with the "adb reboot bootloader" command I read the list of stuff that gets thrown into cmd when you just do adb. Reading the commands I saw a "adb reboot-bootloader" so I do that one, gets me to the fastboot screen and then I'm able to proceed along with the guide.
Moral: If you have to unbrick the phone by flashing the original rom into it, let the wireless update take place before attempting anything else with the phone.
Thanks for the twrp recovery, now I just gotta defeat the encryption.

Awesome work! How did you figure out how to get USB to work?

I will try this but can you share what custom roms can i use on this twrp/phone?

blitzlee06 said:
I will try this but can you share what custom roms can i use on this twrp/phone?
Click to expand...
Click to collapse
You can flash pretty much most of these GSI ROMs.
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list

stevea76 said:
You can flash pretty much most of these GSI ROMs.
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
Click to expand...
Click to collapse
how to check if im using the right architecture and partition style?

blitzlee06 said:
how to check if im using the right architecture and partition style?
Click to expand...
Click to collapse
64-bit quad core, ARM Cortex-A53= arm64bit ,bbut doen'st mean camera or other feature will work out of the box...

Diomorgan said:
64-bit quad core, ARM Cortex-A53= arm64bit ,bbut doen'st mean camera or other feature will work out of the box...
Click to expand...
Click to collapse
how about the partition style?

blitzlee06 said:
how about the partition style?
Click to expand...
Click to collapse
Arm64 A only

[RECOVERY][3.4.0-11][miatoll]TWRP Xiaomi Redmi Note 9S/9 Pro/9 Pro Max/ Poco M2 Pro

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Features:
- Decryption works
- Otg works
- Flash Rom works
- F2FS support
- Fastboot boot command support
Not working:
- Fastbootd
- Adb sideload
- Backup restore and image flash (system-vendor-product)
Download:
TWRP 3.4.0-11 Unofficial by mauronofrio
TWRP 3.4.0-0 Unofficial by mauronofrio
To Flash the TWRP:
Code:
fastboot flash recovery twrp-3.3.1-xx-xxxxxx-mauronofrio.img
Then reboot in TWRP manually or using a fastboot command.
Code:
fastboot boot twrp-3.3.1-xx-xxxxxx-mauronofrio.img
or
Code:
fastboot oem reboot-recovery
REMEMBER: is important that from fastboot you directly go in TWRP mode or the TWRP will be overwritten.
Reccomended ADB and Fastboot binaries:
Adb and Fastboot Installer
Source code:
https://github.com/Teamwin/android_bootable_recovery
https://github.com/mauronofrio/android_device_xiaomi_curtana
Precompiled stock kernel
My Telegram TWRP Support Group:
https://t.me/twrp_Mauronofrio
Donations:
Credits:
- Thanks to @bigbiff and @Captain_Throwback for the hard work on this android 10 TWRP
Thanks to all testers on the Telegram Group
Created 2020-06-30

TWRP 3.4.0-11 for Xiaomi Redmi Note 9S/9 Pro/9 Pro Max/Poco M2 Pro (curtana-joyeuse-gram-excalibur):
Not working:
- Fastbootd
- Adb sideload
- Backup restore and image flash
TWRP 3.4.0-11 Unofficial by mauronofrio

When will official TWRP available?

after system reboot its overwritten by stock recovery

craxoid said:
HELP :
after system reboot its overwritten by stock recovery
Click to expand...
Click to collapse
Enter twrp after flashing and select reboot to recovery
Always works for me

Amnesia_A9 said:
Enter twrp after flashing and select reboot to recovery
Always works for me
Click to expand...
Click to collapse
Have you tried on RN9ProMAX? I flashed Twrp but its not staying permanently.Automatically removes after system reboot

craxoid said:
Have you tried on RN9ProMAX? I flashed Twrp but its not staying permanently.Automatically removes after system reboot
Click to expand...
Click to collapse
I accidentally locked my bootloader so I can't flash anything yet, I can unlock it after 12hours so i will see if I face the same problem.
edit: so I flashed it and didnt face any problem. like i said after flashing the recovery, go to twrp and then reboot to recovery again. after that you can flash magisk or do the system reboot.

how to root ?????

Thanks for providing the recovery, will install it soon

can i flash custom rom made for note 9 pro on note 9 pro max
help plzzz

Redmi note 9 pro max twrp recovery download link

[TWRP] HTC 5G Hub (RTX)

This is a thread for installing TWRP on the HTC 5G Hub
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This twrp was made for the Sprint variant but supports the Telstra variant as well.
Download:
TWRP 3.4.0-0: Here
Steps to install TWRP
First of all, you will be required to unlock your bootloader.
Activate OEM Unlocking in developer settings
Activate USB debugging in developer settings
Go to HTCDev to unlock your bootloader (Select the option at the bottom of the device list "All other supported devices")
Follow the instructions to unlock your bootloader. THIS WILL WIPE YOUR DEVICE!!!
Once you are finished unlocking the bootloader boot into the bootloader and run the following command to load twrp:
Code:
fastboot boot twrp-3.4.0-rtxspr.img
From twrp you can flash magisk or anything else you would like too.
Some things that are useful:
The pinhole button on the back is a vol - key so with that and the power button you can force restart or boot to recovery.
The device is A/B for partitions.
Screenshot:
Spoiler
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Have Fun!

deadman96385 said:
This is a thread for installing TWRP on the HTC 5G Hub
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This twrp was made for the Sprint variant, and is untested on other variants it may or may not work on those.
Download:
TWRP 3.4.0-0: Here
Steps to install TWRP
First of all, you will be required to unlock your bootloader.
Activate OEM Unlocking in developer settings
Activate USB debugging in developer settings
Go to HTCDev to unlock your bootloader
Follow the instructions to unlock your bootloader. THIS WILL WIPE YOUR DEVICE!!!
Once you are finished unlocking the bootloader boot into the bootloader and run the following command to load twrp:
Code:
fastboot boot recovery twrp-3.4.0-rtxspr.img
From twrp you can flash magisk or anything else you would like too.
Some things that are useful:
The pinhole button on the back is a vol - key so with that and the power button you can force restart or boot to recovery.
The device is A/B for partitions.
Screenshot:
Spoiler
Have Fun!
Click to expand...
Click to collapse
I was waiting for TWRP, is will work for Telstra (Autralia) HTC 5G HUB as well?

sfhkorea said:
I was waiting for TWRP, is will work for Telstra (Autralia) HTC 5G HUB as well?
Click to expand...
Click to collapse
It was confirmed to me privately that the Telstra variant is also supported.

deadman96385 said:
This is a thread for installing TWRP on the HTC 5G Hub
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This twrp was made for the Sprint variant but supports the Telstra variant as well.
Download:
TWRP 3.4.0-0: Here
Steps to install TWRP
First of all, you will be required to unlock your bootloader.
Activate OEM Unlocking in developer settings
Activate USB debugging in developer settings
Go to HTCDev to unlock your bootloader
Follow the instructions to unlock your bootloader. THIS WILL WIPE YOUR DEVICE!!!
Once you are finished unlocking the bootloader boot into the bootloader and run the following command to load twrp:
Code:
fastboot boot recovery twrp-3.4.0-rtxspr.img
From twrp you can flash magisk or anything else you would like too.
一些有用的东西：
背面的针孔按钮是一个 vol 键， 所以与它和电源按钮， 你可以强制重新启动或启动恢复.
设备为分区的 A/B。
截图：
[破坏者][/扰流器]
玩得愉快！
[/报价]
你好！你能寄给我一份系统备份的副本吗？我的设备崩溃了非常感谢！
Click to expand...
Click to collapse

你好！你能寄给我一份系统备份的副本吗？我的设备崩溃了非常感谢！

thank you , i try to use your command in bootloader
Code:
fastboot boot recovery twrp-3.4.0-rtxspr.img
but its not working
Code:
fastboot: error: cannot load 'recovery': No such file or directory
i try to use the command without recovery
Code:
fastboot boot twrp-3.4.0-rtxspr.img
its open twrp but i cant install any zip .
is there a way to install twrp to flash magisk
i did everything but still twrp to install magisk

benhomran said:
thank you , i try to use your command in bootloader
Code:
fastboot boot recovery twrp-3.4.0-rtxspr.img
but its not working
Code:
fastboot: error: cannot load 'recovery': No such file or directory
i try to use the command without recovery
Code:
fastboot boot twrp-3.4.0-rtxspr.img
its open twrp but i cant install any zip .
is there a way to install twrp to flash magisk
i did everything but still twrp to install magisk
Click to expand...
Click to collapse
I fixed the typo in the OP sorry about that, what error are you getting when installing a zip? I was able to flash magisks just fine when I rooted mine.

deadman96385 said:
This is a thread for installing TWRP on the HTC 5G Hub
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This twrp was made for the Sprint variant but supports the Telstra variant as well.
Download:
TWRP 3.4.0-0: Here
Steps to install TWRP
First of all, you will be required to unlock your bootloader.
Activate OEM Unlocking in developer settings
Activate USB debugging in developer settings
Go to HTCDev to unlock your bootloader (Select the option at the bottom of the device list "All other supported devices")
Follow the instructions to unlock your bootloader. THIS WILL WIPE YOUR DEVICE!!!
Once you are finished unlocking the bootloader boot into the bootloader and run the following command to load twrp:
Code:
fastboot boot twrp-3.4.0-rtxspr.img
From twrp you can flash magisk or anything else you would like too.
Some things that are useful:
The pinhole button on the back is a vol - key so with that and the power button you can force restart or boot to recovery.
The device is A/B for partitions.
Screenshot:
Spoiler
Have Fun!
Click to expand...
Click to collapse
hi,
i wanted to root my Htc 5G hub (Telstra)
before i try to install twrp, i need some info.
once i downloaded the twrp, do i save it in the pc or on a sd card?
Also, where do i run the command in bootloader? is it through the pc or the device itself?
thanks.

twrp installed. but my screen is unresponsive. any fix?
i tried using usb mouse but wont work

I am stuck at” booting. . . .“

diemoon98 said:
I am stuck at” booting. . . .“
Click to expand...
Click to collapse
I suddenly succeeded

i got my device to boot twrp. but touchscreen doesnt work. plugging a mouse suddenly work but thats as far as it goes.
cant install magisk as in twrp wont read my sd card or internal storage unless i do a full reset. then im back to square one again lol

diemoon98 said:
I suddenly succeeded
Click to expand...
Click to collapse
I encountered the same problem, how did you solve it? THX！

It can't access internal storage and SD card unless I format data. Can I repair it?

Does anyone has a copy of the stock rom? Mine partition got wiped after installed the twrp from recovery.

Can someone give me a backup of the system?

我也需要一个系统ROM，谢谢！

liujuncdb said:
I encountered the same problem, how did you solve it? THX！
Click to expand...
Click to collapse
Same problem here

Using a HTC 5G hub from Telstra (Australia)
I played around with it again lastnight and finally managed to install magisk in twrp recovery.

Anyone can provide a stock rom or backup copy ?
My device was wiped

For People Stuck On Oreo Firmware (Poco F1)

I have seen many people facing this issue where they flashed a OxygenOS rom of different phone ( Due to a idiot youtuber said it can be flashed on all devices )
I recently recieved a POCO F1, with same condition where i cannot update MIUI over Oreo firmware.
So, this guide is for those people who cannot boot any new MIUI other than Oreo OTA
* First make sure you are on Oreo MIUI and your device is working fine.
* Download Latest MIUI A10 OTA and extract it.
* From the above latest OTA pick system, vendor and boot images and place them in any folder.
* Flash system, vendor and boot through fastboot mode using following commands:
fastboot flash system path_to_the_files\system.img
fastboot flash vendor path_to_the_files\vendor.img
fastboot flash boot path_to_the_files\boot.img
* Now Flash lastest recovery for Poco F1 (OOFGang TWRP Suggested ).
* Boot into twrp and flash this fiirmware only (also attached below).
* Format Data and reboot.
* You have A10 MIUI installed.
Notes:
* Dont do anything other than mentioned step else can hardbrick device.
* Dont flash any OTA directly on the device either from fastboot or recovery.
* Dont flash new firmware else you can hardbrick device.
* After insatlling MIUI A10 you can install any rom without any probllem just make sure they dont include any firmware.
DISCLAIMER NOTICE
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.

I wanted to thank you very much for this collaboration, I had this problem for 4 months, I tried everything even edl auth flash and it was not solved, today I followed your procedure and I am now using version 11.0.9 miui, thank you very much !!!!

vinit99 said:
I have seen many people facing this issue where they flashed a OxygenOS rom of different phone ( Due to a idiot youtuber said it can be flashed on all devices )
I recently recieved a POCO F1, with same condition where i cannot update MIUI over Oreo firmware.
So, this guide is for those people who cannot boot any new MIUI other than Oreo OTA
* First make sure you are on Oreo MIUI and your device is working fine.
* Download Latest MIUI A10 OTA and extract it.
* From the above latest OTA pick system, vendor and boot images and place them in any folder.
* Flash system, vendor and boot through fastboot mode using following commands:
fastboot flash system path_to_the_files\system.img
fastboot flash vendor path_to_the_files\vendor.img
fastboot flash boot path_to_the_files\boot.img
* Now Flash lastest recovery for Poco F1 (OOFGang TWRP Suggested ).
* Boot into twrp and flash this fiirmware only (also attached below).
* Format Data and reboot.
* You have A10 MIUI installed.
Notes:
* Dont do anything other than mentioned step else can hardbrick device.
* Dont flash any OTA directly on the device either from fastboot or recovery.
* Dont flash new firmware else you can hardbrick device.
* After insatlling MIUI A10 you can install any rom without any probllem just make sure they dont include any firmware.
DISCLAIMER NOTICE
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
Click to expand...
Click to collapse
Thank you so much for this awesome guide! I haven't encountered the problem myself but I try to learn new things every day.
Just a little question: why wouldn't it be possible to flash new firmware (e.g. from https://xiaomifirmwareupdater.com/firmware/beryllium/) when they are released?

vinit99 said:
I have seen many people facing this issue where they flashed a OxygenOS rom of different phone ( Due to a idiot youtuber said it can be flashed on all devices )
I recently recieved a POCO F1, with same condition where i cannot update MIUI over Oreo firmware.
So, this guide is for those people who cannot boot any new MIUI other than Oreo OTA
* First make sure you are on Oreo MIUI and your device is working fine.
* Download Latest MIUI A10 OTA and extract it.
* From the above latest OTA pick system, vendor and boot images and place them in any folder.
* Flash system, vendor and boot through fastboot mode using following commands:
fastboot flash system path_to_the_files\system.img
fastboot flash vendor path_to_the_files\vendor.img
fastboot flash boot path_to_the_files\boot.img
* Now Flash lastest recovery for Poco F1 (OOFGang TWRP Suggested ).
* Boot into twrp and flash this fiirmware only (also attached below).
* Format Data and reboot.
* You have A10 MIUI installed.
Notes:
* Dont do anything other than mentioned step else can hardbrick device.
* Dont flash any OTA directly on the device either from fastboot or recovery.
* Dont flash new firmware else you can hardbrick device.
* After insatlling MIUI A10 you can install any rom without any probllem just make sure they dont include any firmware.
DISCLAIMER NOTICE
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
Click to expand...
Click to collapse
Sir, u said miui A10 ota is it mean miui Android 10 ota, if yes then can you send me the link please
I am also stuck in miui10. 8.10.25beta after flashing that bull**** OnePlus rom

chef.hira said:
Sir, u said miui A10 ota is it mean miui Android 10 ota, if yes then can you send me the link please
I am also stuck in miui10. 8.10.25beta after flashing that bull**** OnePlus rom
Click to expand...
Click to collapse
bro, just follow his tutorial, download the extract rom, flash boot, vendor, system dps enter twrp and flash the firmware he put here.

on flashing system.img it gives error cannot flash system.... while other partitions can be ... and can you please tell is it OTA package or fastboot package that we have to extract to get system files ??

mit_techie said:
on flashing system.img it gives error cannot flash system.... while other partitions can be ... and can you please tell is it OTA package or fastboot package that we have to extract to get system files ??
Click to expand...
Click to collapse
did you put the files inside the adb folder and use the commands with the device in Fastboot? the files have to be extracted from the fastboot version
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot flash boot boot.img
then go up the twrp and flash the firmware

duttyend said:
Thank you so much for this awesome guide! I haven't encountered the problem myself but I try to learn new things every day.
Just a little question: why wouldn't it be possible to flash new firmware (e.g. from https://xiaomifirmwareupdater.com/firmware/beryllium/) when they are released?
Click to expand...
Click to collapse
actually u can upgrade but need to remove 3 files corresponding to the bootloader!

Rafael-SJC said:
did you put the files inside the adb folder and use the commands with the device in Fastboot? the files have to be extracted from the fastboot version
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot flash boot boot.img
then go up the twrp and flash the firmware
Click to expand...
Click to collapse
Just flash abl.elf and then while flashing anyrom just delete abl.elf file from the zip file and it would work fine

vinit99 said:
actually u can upgrade but need to remove 3 files corresponding to the bootloader!
Click to expand...
Click to collapse
What are the files? abl.elf , xbl and xbl_config ???

vinit99 said:
I have seen many people facing this issue where they flashed a OxygenOS rom of different phone ( Due to a idiot youtuber said it can be flashed on all devices )
I recently recieved a POCO F1, with same condition where i cannot update MIUI over Oreo firmware.
So, this guide is for those people who cannot boot any new MIUI other than Oreo OTA
* First make sure you are on Oreo MIUI and your device is working fine.
* Download Latest MIUI A10 OTA and extract it.
* From the above latest OTA pick system, vendor and boot images and place them in any folder.
* Flash system, vendor and boot through fastboot mode using following commands:
fastboot flash system path_to_the_files\system.img
fastboot flash vendor path_to_the_files\vendor.img
fastboot flash boot path_to_the_files\boot.img
* Now Flash lastest recovery for Poco F1 (OOFGang TWRP Suggested ).
* Boot into twrp and flash this fiirmware only (also attached below).
* Format Data and reboot.
* You have A10 MIUI installed.
Notes:
* Dont do anything other than mentioned step else can hardbrick device.
* Dont flash any OTA directly on the device either from fastboot or recovery.
* Dont flash new firmware else you can hardbrick device.
* After insatlling MIUI A10 you can install any rom without any probllem just make sure they dont include any firmware.
DISCLAIMER NOTICE
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
Click to expand...
Click to collapse
Bro, i have same problem with my mi 8 devices, i follow u giude: my device working fine with miui global A8; dowload and extract latest MIUI A10 global OTA (.zip file) but don't have system.img and vendor.img, just system.patch and vender too, then i extract a latest fastboot rom and flash vendor, system, boot and it working fine, then i flash latest firmware for mi 8 miui A10. everything lock good but when i format device and :
-reboot system, my devices boot to fastboot mode and can't boot to recovery mode (twrp), i have to flash a old rom again because a new rom with A10 not worked.
-reboot recovery, have same problem like when i reboot system.
can u explain or help me fix this problem, thank you very much.
sorry for my bad english

Rafael-SJC said:
I wanted to thank you very much for this collaboration, I had this problem for 4 months, I tried everything even edl auth flash and it was not solved, today I followed your procedure and I am now using version 11.0.9 miui, thank you very much !!!!
Click to expand...
Click to collapse
can u tell me all step u did, i follow the guides but it not work to me
sorry for my bad english

Or
We can simply
Replace abl.elf file from miui 12 firmware with miui 9 firmware also when we flash any rom just replace abl.elf or don't flash firmware
For this process no need of miui 9 or 10 rom
Just flash abl.elf file via Fastboot mode

Helloindia3 said:
Or
We can simply
Replace abl.elf file from miui 12 firmware with miui 9 firmware also when we flash any rom just replace abl.elf or don't flash firmware
For this process no need of miui 9 or 10 rom
Just flash abl.elf file via Fastboot mode
Click to expand...
Click to collapse
Oh, lock so simply, can you instruct me in detail, please.

Helloindia3 said:
Or
We can simply
Replace abl.elf file from miui 12 firmware with miui 9 firmware also when we flash any rom just replace abl.elf or don't flash firmware
For this process no need of miui 9 or 10 rom
Just flash abl.elf file via Fastboot mode
Click to expand...
Click to collapse

the dev talked about 3 files to change when updating, when I need a flash rom I just remove the 3 files from the install zip and no problem

Mkuong said:
Bro, i have same problem with my mi 8 devices, i follow u giude: my device working fine with miui global A8; dowload and extract latest MIUI A10 global OTA (.zip file) but don't have system.img and vendor.img, just system.patch and vender too, then i extract a latest fastboot rom and flash vendor, system, boot and it working fine, then i flash latest firmware for mi 8 miui A10. everything lock good but when i format device and :
-reboot system, my devices boot to fastboot mode and can't boot to recovery mode (twrp), i have to flash a old rom again because a new rom with A10 not worked.
-reboot recovery, have same problem like when i reboot system.
can u explain or help me fix this problem, thank you very much.
sorry for my bad english
Click to expand...
Click to collapse
you have to download the .tgz file, where you can find the flash files on the fastboot. Before everything with the cel working releases usb debugging, put the twrp image and the firmware edited in the internal memory. Now you go into fastboot flash the system, vendor and boot .img, and flash twrp. enters recovery twrp flash edited firmware, format data and reboot

Helloindia3 said:
Or
We can simply
Replace abl.elf file from miui 12 firmware with miui 9 firmware also when we flash any rom just replace abl.elf or don't flash firmware
For this process no need of miui 9 or 10 rom
Just flash abl.elf file via Fastboot mode
Click to expand...
Click to collapse
Bro , this error occurred, can you tell me how to fix it? it was in Miui 12.0.3, this rom does not change the firmware there is nothing in the zip, I did not understand why the error

mit_techie said:
Just flash abl.elf and then while flashing anyrom just delete abl.elf file from the zip file and it would work fine
Click to expand...
Click to collapse
I'm trying to flash OctaviOS and asks for fw 12.0.2, I can just flash the abl. elf and keep the rest as it is? on which flash partition the abl. elf?

I want to install aex 8.0 official build but it's showing u need a firmware from miui A10 based please help me