Related
I got my Triumph and it will not charge no matter where I have plugged it in or fiddled with the charger. It does not matter whether it is on or off. I have been using the wall charger that's included and I have tried USB through my computer. Before I go to the hassle of sending my triumph back I wanted to see if there is a solution. Thanks in advance.
The first one I got did this sometimes as well. I took it back and swapped it.
Jumpstart
My triumph would not even turn on strait out of the box. I had to "Jumpstart" the battery, here is a link on how to do it. thejosea.com/2011/02/jump-start-your-droid-when-no-wall.html (Sorry i cant post links yet, gonna have to copy paste)
You pretty much have to charge the battery by its self outside of the phone. Once you do this let it sit charging for about 20 minutes then try to charge it through the phone.
You should only have to do this once.
It seems like the batteries are not being shipped charged and they run "Dry".
You MIGHT want to try a different USB cable.
I'm using my Nook Color adapter(1A) and a generic USB cord which works fine, however one time I accidentally used my Optimus V cable and it would NOT charge while the MT was up and running, however it WOULD charge IF I powered down the MT...
I haven't even tried the cable that came with MT yet... nor have I tried charging via a USB port on my nb, but I imagine that would be REALLY sssslllloooowwwww....
I exchanged my device for a new one, and with my new phone, when plugged in, the lock screen no longer shows "Chargin" with the %. Any ideas how to bring it back?
It only shows that if you're on an AC charge. If you're on USB it won't.
I've tried on 2 different AC chargers and it still doesn't display
Same cord? The AC pins have to be shorted or it won't go into AC charge mode. I have a couple of USB cords that work fine for connections to the computer but will not go into AC mode (the USB cords that come with the Optimus are known for doing this on other phones, incidentally....)
It'll charge without AC mode being "engaged" but at the 500ma rate instead of the 1A rate, so it will take a lot longer.
the answer is simple.....due to crappy crappy design of micro usb the charge port actually comes un-soldered from the board and obviously it no longer will charge nor will usb work!!! now before you ramble on with how do i know i wondered why mine wouldn't worked i opened the phone and notice the micro usb pins were not attached anymore....i have sent this in to Motorola which gives you a 2 year warranty instead of virgin mobiles crap $5 a month insurence then you still have to pay like $100 to get a new phone!!! so i will post how everything goes so far i know the repair center is in McAllen TX and they give you a free 2day shipping label valued at $100 to send in the phone!
You might want to try plugging it into a wall (not pc) and leave it for 20 minutes. Mine ran completely dry one time and it wouldn't display nothing until it charged for a while. If you've already tried this then definitely take it back.
nickmcnamara said:
the answer is simple.....due to crappy crappy design of micro usb the charge port actually comes un-soldered from the board and obviously it no longer will charge nor will usb work!!! now before you ramble on with how do i know i wondered why mine wouldn't worked i opened the phone and notice the micro usb pins were not attached anymore....i have sent this in to Motorola which gives you a 2 year warranty instead of virgin mobiles crap $5 a month insurence then you still have to pay like $100 to get a new phone!!! so i will post how everything goes so far i know the repair center is in McAllen TX and they give you a free 2day shipping label valued at $100 to send in the phone!
Click to expand...
Click to collapse
*update* They are fixing my phone now and i should get it in 5-7 business days no problems they received the phone and started the repair
I had the same problem but different solution.
I too let my phone completely discharge to find that it would not indicate that it was charging or even power on with or without the battery being present, but I "jumped started" my phone. This is a weird technical solution that went as followed in its entirety, meaning, some of these steps might be pointless or useless but I did them and I now have a working resurrected MT in my hands that is charging. This solution is assuming that there is no problem with the micro USB soldering on the main board.
"Jump Starting"
1) Remove the back casing and your MT battery and place both to the side, but keep the battery close by for polarity reference.
2) Have another battery of the same 3.7v that is charged (disregarding mAh).
3) Now here is the fun part and pay CLOSE ATTENTION to POLARITY!!!
-Get two spare wires, preferably of different colors so you can tell the [+] from the [-].
-With the spare 3.7v battery you have, in what ever way you can, connect your spare wires to it, paying close attention to polarity.
-Now that you have your spare battery wired, CORRECTLY connect the wires to the inside connectors of your MT what ever way you can, paying close attention to polarity.
Being [+] connected to [+] and [-] connected to[-]
4) Boot your phone until you know you are at the home/lock screen. Then remove the wires from the MT battery connectors.
5) Use this same battery and connect it to your battery for about 30-60 seconds, paying close attention to polarity. This will give the battery some juice for the system to recognize.
6) Place the battery back in the phone without attempting to turn it on and return the back case to the closed position.
7) Now connect your MT to a powered micro USB cable and see if the red indicator charging light turns on.
-If so then great!
-If not then you may have some other problems
-If yes and no, as in the cable has to set a certain way for it to charge then just keep on reading for that fix as well.
"Loose Connection Fix"
This is how I fixed my loose micro USB cable and it worked for me, but I do not have soldering problems on my main board of my MT so proceed if you think this will help.
1) Your micro USB male side of the cable that plugs into your MT should look something like this (excuse the crude drawing of letters)
{the dots are empty space}
____________
\................... /
\UUUUUU/
2) Get a pair of needle nose pliers and SLIGHTLY pinch/squeeze the center of the male port closed so it looks like this
____...... ____
\.... \...... /.... /
\UUUUUU/
Except not that extremely bent inward, but you get the idea.
This will force the male tongue in the MT charging port to be forced onto the pins inside the micro USB cable for a better connection and thus fixing the loose connection problem
I hope this helps someone, it helped me save my $300 paper weight from actually being a paper weight.
Froxen said:
I too let my phone completely discharge to find that it would not indicate that it was charging or even power on with or without the battery being present, but I "jumped started" my phone. This is a weird technical solution that went as followed in its entirety, meaning, some of these steps might be pointless or useless but I did them and I now have a working resurrected MT in my hands that is charging. This solution is assuming that there is no problem with the micro USB soldering on the main board.
"Jump Starting"
1) Remove the back casing and your MT battery and place both to the side, but keep the battery close by for polarity reference.
2) Have another battery of the same 3.7v that is charged (disregarding mAh).
3) Now here is the fun part and pay CLOSE ATTENTION to POLARITY!!!
-Get two spare wires, preferably of different colors so you can tell the [+] from the [-].
-With the spare 3.7v battery you have, in what ever way you can, connect your spare wires to it, paying close attention to polarity.
-Now that you have your spare battery wired, CORRECTLY connect the wires to the inside connectors of your MT what ever way you can, paying close attention to polarity.
Being [+] connected to [+] and [-] connected to[-]
4) Boot your phone until you know you are at the home/lock screen. Then remove the wires from the MT battery connectors.
5) Use this same battery and connect it to your battery for about 30-60 seconds, paying close attention to polarity. This will give the battery some juice for the system to recognize.
6) Place the battery back in the phone without attempting to turn it on and return the back case to the closed position.
7) Now connect your MT to a powered micro USB cable and see if the red indicator charging light turns on.
-If so then great!
-If not then you may have some other problems
-If yes and no, as in the cable has to set a certain way for it to charge then just keep on reading for that fix as well.
"Loose Connection Fix"
This is how I fixed my loose micro USB cable and it worked for me, but I do not have soldering problems on my main board of my MT so proceed if you think this will help.
1) Your micro USB male side of the cable that plugs into your MT should look something like this (excuse the crude drawing of letters)
{the dots are empty space}
____________
\................... /
\UUUUUU/
2) Get a pair of needle nose pliers and SLIGHTLY pinch/squeeze the center of the male port closed so it looks like this
____...... ____
\.... \...... /.... /
\UUUUUU/
Except not that extremely bent inward, but you get the idea.
This will force the male tongue in the MT charging port to be forced onto the pins inside the micro USB cable for a better connection and thus fixing the loose connection problem
I hope this helps someone, it helped me save my $300 paper weight from actually being a paper weight.
Click to expand...
Click to collapse
I let my battery die down and also did a battery memory reset, then the phone acted bricked.
Then I tried this to revive and it worked!
Thanks for the help here I did this but when I connected the batter to the phone nothing happened. I connected battery to battery let sit for about 90 sec put it in phone and plugged in and the red light is now on!
Thanks!
Well,
add my phone to the list. It started about 2 weeks ago when after completing charge, instead of maintaining trickle charge it just let battery drain. I woke up couple of times in the morning finding the phone's battery on it's last legs. Now it simply refuses to charge by anything but my car charger. Lucky for me (and I thought I would never say it in my life) I have a long commute to work and it allows me to recharge the phone while I enjoy typical traffic delights.
I am going to call Motorola and discuss my options with them. I hate doing this as my phone is long since rooted and running CM7, so I will probably have to revert to factory settings before sending it off and if they decide to exchange I would be running a chance of receiving one with bad GPS.
yes i've had this problem to i have to charge my phone on a Samsung charger no motorola charger will work on my phone.
Sorry, I'm somewhat new here.
I have a Motorola Triumph and it just stopped working. The general idea is that the Micro-USB port was shoved up into the device?
How do you go about contacting Motorola about sending it back to be repaired?
I have delt with this problem SO MUCH, have you tried my battery charging fix yet ? I have the link posted in this section called battery charging fix, Hope this helps you it sucks when your phone won't charge.
Well the problem is that it won't even turn on. I think the battery has some kind of charge but when I hit the power button, it vibrates like it's booting up then stays off.
I don't know that much about phones, but from what I can gather off Google and the various threads on XDA (Great site, by the way!) the general consensus is that it's the micro-usb port.
Granted, I may be wrong, which is a very real possibility. Heh.
Well 2 things, have you replaced your recovery with the clockwork recovery image ? If so try any means nessary to get into recovery, My old Triumph would NOT charge with any motorola charger, I belive this is a defect with the triumph. You might try a powermat of some kind to get enough power to get to recovery & do what my guide says to fix this most pain in the ass problem, Or get another battery & follow the guide. It's worth a shot anyway. otherwise you've got two options replace it or open it up, if you're gonna open it up then get a super fine sautering tip or file one down to needle size, this is how I do precision sautering on circut boards.
No, I had downloaded Clockwork with the intention of installing a 2.3 rom on it, but never got around to it. As for the charger, my Triumph charges with any micro-USB, from my old LG and Samsung chargers to the Motorola charger that came with it. It acts weird though when I plug it into a computer, saying it is connected to a computer, then that it's not, then that it is, then that it's not, repeatedly. I usually just end up turning it off so it won't do that.
I find it weird, though, that now when I try to charge it, the charging light up where the speaker is will not come on, as if it isn't charging. (And I don't think it is charging.)
I've also tried putting it into the "recovery mode". (Like I say, not too knowledgeable about phones yet. Learning experience. ) When I boot it up (into "recovery mode" or "regular" (?) mode) it just vibrates like it should then does nothing.
Edit: It finally did boot into the "recovery mode", but the touch button things at the bottom (menu, home, back, and search) don't do anything, and I cannot get into the menu to do a factory reset.
I don't think it's the battery now? I am more confused then I was when I started, and appreciate any and all help!
So, I'm traveling (for a long period of time) with my TF. One day, it stopped charging.
I took apart the power brick and put it back together, I even tried to freeze it (on advice from some older "not charging" threads), nothing helps.
When I connect the TF to my laptop via USB - it recognizes the TF. When I connect my iPod to the power brick (with its own cable obviously) - it charges just fine. So what broke?!
I hate this, the local stores here don't sell the power brick separately and I don't even know if that's the source of the problem.
This sucks
Sounds like the power pin in the TF port has bent/broken or just has some detritus/dirt/foreign matter in it and is stopping it from charging properly. Have a look, but you might need to check the port with lots of light and a magnifying glass, so not easy while you're on the move.
If you are in the US Office Depot sells the charger and USB cable for $30.
strange thing is that sometime my transformer doesn't charge.
i have to reboot and it start to charge again.
Same happened here. Asus tech wanted me to wipe the device. After trying other options to get it to charge, I did but it didn't wipe... Go figure... But it booted up normally and now it has been charging.
Sent from my HTC Sensation 4G using XDA App
Apparently charging has some history of issues on the TF101.
I just had mine act up on me, went around the house trying different wall sockets and checked that it worked fine via USB to PC. Ended up taking a can of dust-off to all the pins, then shoving the plug hard into the TF101 socket. Now it works.
Should have mentioned I have a dock as well, which doesn't charge either (so problem is probably with cable/brick)
I'm trying to get new ones (nowhere to be found here, but I'm trying to get one sent to me). I tried looking for dust/dirt and different wall sockets, no luck.
Weird thing - I left it plugged in to the wall overnight and it grew from 5% to 15%, so looks like some electricity is trickling.
I had the same problem with mine after I had it for 5 weeks, I just RMA'd it and everything is fine.
Im having the same exact problem. I left it charging over night by mistake the night before yesterday. I only let it charge 3 hours the most because I know the Transformers have known issues.
I tried to charge it this morning and nothing. I plug it into my PC. The PC recognized the Transformer but no charging. Turned it on and off, nothing.
Just put the power brick in the freezer, waiting to dry up to see if it works .
Although the tf charger and cable has a usb connector it is not usb compliant. the charger brick looks for a gnd signal on pin 7 of the usb connector ( normally a usb 3.0 data line) to determine it should supply 15V to the positive charge pin vs standard 5V. The slow charge you are seeing is from the 5V supply . check to see if pin7 is seeing the gnd signal. Are you using a usb 2.0 extension cable as it doesn't have have pin 7 conductor. be careful connecting your ipod as it could accidentaly see 15V vs the 5V it is designed for.
I touched on this in the EOS thread, but I've discovered it's probably not the ROM's fault and some other problem. I was staying in a very old hotel, which I assume had very poor electricity (not sure if relevant, but wife's iphone was charging slowly too, so maybe it could be part of the problem - way too low voltage or something). Plugged the (TF101) in and it charged barely, if at all. If I recall, the wall adapter got hot on the first try (didn't really take much notice as this has happened semi-frequently since I got it - might describe it more as "warm" in the past, where in this case I'd call it "hot") and from then on probably charged to about a max of 25% in 24 hours. So assuming the problem was the hotel, I tried it again at home, where I knew it always worked, and it still doesn't charge. so...
TL : DR - charger isn't charging - thought it was the electrical supply but it's not (though it could have started the downward spiral of breakage)
I tried freezing the adapter, bending pins, hard reset/cold boot, etc as per different threads on the subject. Didn't help.
Tried plugging the USB cord into a PC and it shows up as a connected device - doesn't show charging on the Transformer, but I don't think it's supposed to - so I think that means the cord is okay.
I plugged a Blackberry with its USB cord into the wall charger and it shows "charging" so it would seem that part is okay - but not necessarily definitive proof as it's a completely different device, just my only other USB device I could test.
This all happened right after flashing the newest EOS Jellybean ROM (from #70 to #72 - no full wipe - cache & dalvik wipe only), but I've switched back to Megatron, which worked perfectly in the past, and nothing changed with the charging. So unless it's possible for parts of the EOS ROM to remain (after a full wipe this time), it would seem the problem is with the charging circuit or the battery itself, right? Not sure what steps to take to test that.
I think I will probably try a new charger anyway, as that seems the cheapest of the $$$ options to try first, but are there any tests I can do in the meantime without spending money on replacement parts? At the moment I have it plugged in with the power off to see if that does anything - will update with any positive results
(Sorry for long-winded question, I wanted to get as much relevant info in there as possible. Hopefully I got it all)
Start by buying a new usb cable, that fixed my issue. Wall socket and usb port only trickle charged my tf101 (about 48 hours for full charge) tried all the freezing, bending pins but nothing worked. I then brought a new usb cable as a last resort (Wall warts are quite expensive so i was apprehensive of buying a new one) and it started charging straight away. seemed strange because the charging issue was just out of the blue (No damaged to the cable)
doubt this needs an update, but my new charger and (longer!) cord came today and it's charging my tablet perfectly. thanks for the info
now to catch up on 2 weeks worth of ROM updates
Dunno if its the right thread but I was also wondering:
My TF101 charges perfektly with the Wallcharger (TF to USB Cable + Adapter). But as soon, as I put
an USB-to-USB-Cable between Adapter and TF-USB-Cable to enlarge the range ... it wont charge anymore.
But: if I connect the same config it to my PC... I'm fully able to Up/Download/ ADB etc... so it can't be the connection
at all.
What's the trick? What am I missing?
Hi everyone,
My first post as I haven't been able to find an answer. My Photon Q was probably about 30% charge when I last checked with it on. An hour or 2 later it was a little warm and was off. So I went to charge it using the car charger with 500mah charge rate. I came back about an hour later and the phone was really hot and no charging screen so I unplugged it. The green led light is lit when the phone is plugged in.
I tried holding the power button and volume down button, but it won't boot. If I have the usb charging cable plugged in from a PC or charger adapter when pressing those buttons, the green light will flicker off for a fraction of a second.
I then proceeded to dismantling the phone as I suspect a battery issue and the one in this phone is stupidly non-removable. After taking the back cover off, I tested the battery posts and received 0 volts. I still don't know if the battery caused the drain or if there's a short in the phone. I then took off the inside cover that holds the battery in. A few T5 screws later and the battery was removed. I connected the battery to some AA batteries in series to see if I could get a charge. A few hours later I got it up to 3 volts which held for several hours. So I connected it to a few more AA batteries in series to try and raise the voltage. I got it up to 3.67 volts and the battery is listed at 3.7 volts.
A day later and the voltage is still at 3.67 volts so I put the battery in the phone. I went to try and power it on, but nothing. I then connected it to a usb cord and received the slow flashing red led light a couple times before switching to green. The battery started getting warm again connected to the usb charger. After 20 minutes it was approaching hot so I unplugged the USB. The battery read 3.54 volts. 30 minutes later, 0 volts again.
Does anyone know what the actual voltage range is for this phone, as my old Samsung M320 is also 3.7 volts, but when testing the battery I get 4.10 volts? I heard it's pretty specific on minimum voltage. Any ideas for a temporary battery or way to boot the phone before spending $50 on a replacement battery and then find out there's a short in the phone. Is there another key combination to boot the phone, I'm trying to boot it to at least get my pictures and other data off it.
Thanks a lot in advance
Matt
Not the battery, seems to be an electrical short but where
I bought a new battery for the phone which had a 0 volt charge when I received it. I tried putting it in the phone as is to use the phone charger to charge it, but got nothing. So I charged it using 2, then 3 and then 4 AA batteries in series to get it up to 3.7 volts. I then put the battery in the phone and noticed the 2 large chips and the chip centered above them located by the camera get a little hot. I tried with the charger connected and not connected, but same thing. Power button doesn't turn the phone on. Just the green led lit when the USB power cable is attached. So now it seems there must be a short in the phone. Anyone know where I can look to check for a short, blown resistor or something in this phone? Or at least where the rom chip is located so maybe I can turn it into a usb drive to get my data at the least.
Anyone? I still haven't been able to find a solution. I don't see pins touching, but if some pins are touching in the usb port, would that cause the heat issues when I put a battery in that I charged externally? I do get the green led light when I plug the phone in to charge so figure that means the usb is ok?
Regal's Photon Q said:
Anyone? I still haven't been able to find a solution. I don't see pins touching, but if some pins are touching in the usb port, would that cause the heat issues when I put a battery in that I charged externally? I do get the green led light when I plug the phone in to charge so figure that means the usb is ok?
Click to expand...
Click to collapse
did you try a other charger ? do you have oryginal photon charger ? for me its not a reason of battery
regards
(in situation like that charging with normal usb cable when you plug phone to pc dont charging battery, you need motorola usb service cable to make it work)
niko99 said:
did you try a other charger ? do you have oryginal photon charger ? for me its not a reason of battery
regards
(in situation like that charging with normal usb cable when you plug phone to pc dont charging battery, you need motorola usb service cable to make it work)
Click to expand...
Click to collapse
Yep used the motorola cable that came with the phone (plugged in the wall and just the cable in multiple computers, another motorola house charger (the same as the one that came with the phone), a motorola car charger, and a samsung house charger.
When you say motorola usb service cable, I assume you're not talking about the motorola cable that comes with the phone? What usb service cable are you referring to?
Regal's Photon Q said:
Yep used the motorola cable that came with the phone (plugged in the wall and just the cable in multiple computers, another motorola house charger (the same as the one that came with the phone), a motorola car charger, and a samsung house charger.
When you say motorola usb service cable, I assume you're not talking about the motorola cable that comes with the phone? What usb service cable are you referring to?
Click to expand...
Click to collapse
factory / sevice cable ( i make my own from below tutorial)
http://forum.xda-developers.com/showthread.php?t=1077414
if you buy / make this cable , you will be have posibility to use RDS lite and flesh firmware this also make help (if you have low battery flesh with normal usb cable is not possible )
and second thing... maybe try some car charger ?
Alright, so here is a fun issue to deal with. My notepro has always been a little slow to charge, but most of them are. However, its gotten very bad.
I have had issues with screen flicker and a little heat issues and some other small things off an on. So, fed up with it, a few days ago I rooted the tablet. It worked fine. Then I tried to install a new kernel and rom that was getting good reviews. However, when i did this, I couldnt get past the boot screen. Several reinstalls of stock and customer kernels later, my tablet started flashing and eventually died. When it was plugged in, it would show the battery icon with a circle in the middle but then die. Several tries to fix only seemed to solidify the tablet's fate.
However, yesterday I gave it another shot. I assumes the tablet had heated up and made the solder loose, so after a while it was solid again. It started charging, and after reinstalling stock rooted rom and stock kernel repeatedly, it was working again. I then installed the rom and kernel I was trying to before (I had to have a custome kernel to be able to control voltage for the screen flickering issue).
Now it is actually working. All functions are working, and oddly enough I am not seeing any screen flickering.
Only one real problem remains. Battery charging. The battery is charging so slowly that when the tablet is turned on, it doesnt charge at all, it creates a stalemate between charging and draining. It also drains pretty quick. The power drops about 5% in about 5-10 minutes of full screen brightness use (I was testing it this way to try and see if it would flicker again.
Its been charging for about an hour now, and only gone up 5%.
I have tried a couple cords and different bricks, but to no avail.
There are some thoughts, I am wondering if the tablet is only drawing power as if charging from usb, so only around 0.5a instead of 2.4a or so . I am also wondering if there is still a hardware issue.
I do not think it is the rom or the kernel, as this issue was happening as well after I got the tablet working again on stock but before I tried isntalling the rom/kernel again.
Any suggestions? I would be very appreciative.
I had simular problem with very slow charging, reboots and bluescreen. I opend my note to check battery plugg for broken soldering, but I found no problem with it. But to check turely i unplugged battery from main bord and replugged it again. After that I had no problem at all, now its charging normal, no reboots.. stil working perfect after averyday use for about 8 mounts......
If you are using usb cord not usb3 cord it will charge very little when using tablet . Mine will charge when off and below 25% to full in 7 or 8 hrs overnight.
Sent from my SPH-L300 using XDA Free mobile app
Could be a bad charging port dock/flex cable. These are actually pretty easy to replace and can be found on Amazon. I had to replace one on mine. Try searching for a usb charging port dock flex cable for samsung galaxy note pro. That will cause the issues you are seeing. However the screen flickering sounds like a voltage issue caused by a cracked solder pin from the battery connection to the board. Which is very common on these and hard to see without an electronics magnafication glass. You could try taking the back off and pressing the battery connection firmly while plugging in your tablet and powering it one to see what happens. Either way sounds like a hardware issue.
snifferno said:
I had simular problem with very slow charging, reboots and bluescreen. I opend my note to check battery plugg for broken soldering, but I found no problem with it. But to check turely i unplugged battery from main bord and replugged it again. After that I had no problem at all, now its charging normal, no reboots.. stil working perfect after averyday use for about 8 mounts......
Click to expand...
Click to collapse
Ok Guys, had the same problem with my 12.2 samsung tab pro, changed usb chargers, cables etc.
Found that the connector on the tablet itself (female) did not made good contack with the male usb.
So i simply , very careful, with a pair o pliers closed both tips on the usb conector, so the cable enters more tight. And voila, the usb amp meter i had showed a rate of charge from .33 amp , jumped to 1.73 witch is more than enough to charge and use tablet at the same time.
You need to do this at the end of the cable that plugs on the tablet, that is kind of double, maybe a e.0 usb or something like that. Make sure to close both tips. You want a tight connection