Database Info

Cherry mobile Omega HD (i-mobile IQ6)

Omega HD root
Disclaimer: I will not be liable for bricked devices. Follow these instructions at your own risk. ROOTING VOIDS WARRANTY, as per Cherry Mobile. Please be guided accordingly.
This tutorial is not recommended for newbies. Knowledge of basic adb and fastboot commands is helpful. Better if you have previously installed ADB drivers.
Downloads (http://www.mediafire.com/?ar2ccya8395d1):
SuperSU zip
TWRP
SP Flash Tool
MTK Drivers
MTK 6577 scatter file
if the driver didn't work download this http://www.4shared.com/zip/YXlLFoLm/6577driver_install_3_steps.html
install folder step 1 to 3
Place the scatter file and TWRP recovery in the SAME FOLDER.
rename twrp recovery to recovery.img
1. While the phone is still on, enable USB debugging (Settings > Developer options) then plug into PC. Allow drivers to install. Install the MTK drivers as well.
2. Mount phone as USB storage. Copy SuperSU zip to internal or external SD card. Unmount USB storage, then unplug phone from PC.
2. Turn off phone. Remove the battery.
3. Start SP Flash Tool. Under "Scatter-loading," choose the MT6577_Android_scatter_emmc.txt. You will see that RECOVERY has a check beside it. Click on "Download." A warning will appear, proceed anyway.
4. With your phone still off and the battery out, plug it in to the PC. Flashing should start. It will only take a few seconds. You'll see a green circle when it's done.
5. Unplug USB cable and put the battery back.
6. Enter recovery mode by Power and Volume + button. Release both buttons when you see the boot menu. Use Volume + to highlight "recovery." Then use Volume - to confirm.
7. Click "Install." Choose the appropriate tab (internal or external SD card).
8. Select UPDATE-SuperSU-1.25 zip. Swipe to confirm the update. It will flash. Go back to main menu of TWRP.
9. Click "Reboot system." Wait until you are fully booted into your homesceen.
10. Once booted, you should see SuperSU in your app drawer.
credits to ish gridote
OmegaXtremeHD
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
s3 bootanimation n sound
s3 boot logo
Jelly bean icons
iphone ringtones
google play music
dolphin browser
apex launcher
deodexed
busybox
rooted
init.d
signal tweaks
3g tweaks
battery tweaks
gpu rendering
dns tweaks
media tweaks
v6 supercharger
kickasskernel
crossbreeder
reorganized build.prop file
uploading
http://www.4shared.com/folder/dJXI2ODd/_online.html
try open first in case of corrupt file
remove crossbreeder for much better battery
flash uninstall zip http://forum.xda-developers.com/showthread.php?t=2113150
and underclock for much longer battery download setcpu or no frillcpu or anything u want i dnt care..
save rom in SD card
reboot to CWM/TWRP
install rom via SD card
reboot
I'm not responsible for any loss of data or brick....
i think this only works on iq6A

do you already own this phone?

Cherry mobile Omega HD info states that its a dual core phone while all info about i-mobile IQ6 states its a single core phone. does anyone know which mediatek chipset the Omega HD uses? It's GPU?

yes i had it

How?
How can we flash the CWM to the Omega HD if you don't even give us a flashtool? Is this Rooting process tested? is it working?

Please help me
Wil53664 said:
yes i had it
Click to expand...
Click to collapse
Sir, can I have a copy of the Setting.apk of your Cherry Mobile HD? i've accidentally forgot to have a backup of it and now, i've accidentally just erased it. please help me. thankyou very much

Pretty Please?
Wil53664 said:
yes i had it
Click to expand...
Click to collapse
please post the Settings.apk of the Cherry Mobile Omega HD sir. I really need it it would be appreciated if you post it here.

How to Backup the phone
just bought the phone yesterday
do yo guys know how to back up this jellybean phone?

Hey guys, if you have FB we have a group with most of oHD users. Just search "CherryMobileOmegaHD" in FB (can't post links yet. sorry)
There are custom roms in the group, the usual rom cooked from dsdixda's kitchen (zipalign, deodexed, rm bloatwares)
@cyzarine
What do you mean with backup? We have the stock rom in the group, you might want to check it out.

Bummer! I'm stuck at step 3!
You will see that RECOVERY has a check beside it. Click on "Download." A warning will appear, proceed anyway.
Click to expand...
Click to collapse
-- umm... NO, I DON'T!! There must be a step that's missing... :-S
edit:
nevermind. I forgot to rename TWRP file to "recovery"
Thanks for this!

anyone have a kernel that have oc"?

In need...
Woke up to a drained Omega HD today.
Plugged it in to have it charged.
Switched it on afterwards.
"OmegaHD" flashed before my eyes, followed by a blank screen with the familiar Cherry Mobile tune playing on the background. And then nothing! NO DISPLAY! I touch the screen and there are sounds playing to confirm each press, which means I am pressing on the right places -- only that there is NO DISPLAY APPEARING.
I switch it on and off, still the same results.
Wiped cache. Nothing... Since it's practically new, I go ahead and factory-restore the thing... still the same results. NO DISPLAY! :-S
What else can I do to this device to have it work properly?!

Have you installed any custom rom or any other zip files with your phone?

xMinistro said:
Have you installed any custom rom or any other zip files with your phone?
Click to expand...
Click to collapse
do have stock rom can you give plsss......

---------- Post added at 11:02 PM ---------- Previous post was at 10:41 PM ----------
[/COLOR]
Wil53664 said:
Omega HD root
Disclaimer: I will not be liable for bricked devices. Follow these instructions at your own risk. ROOTING VOIDS WARRANTY, as per Cherry Mobile. Please be guided accordingly.
This tutorial is not recommended for newbies. Knowledge of basic adb and fastboot commands is helpful. Better if you have previously installed ADB drivers.
Downloads (http://www.mediafire.com/?ar2ccya8395d1):
SuperSU zip
TWRP ported by me
SP Flash Tool
MTK Drivers
MTK 6577 scatter file
if the driver didn't work download this http://www.4shared.com/zip/YXlLFoLm/6577driver_install_3_steps.html
install folder step 1 to 3
Place the scatter file and TWRP recovery in the SAME FOLDER.
rename twrp recovery to recovery.img
1. While the phone is still on, enable USB debugging (Settings > Developer options) then plug into PC. Allow drivers to install. Install the MTK drivers as well.
2. Mount phone as USB storage. Copy SuperSU zip to internal or external SD card. Unmount USB storage, then unplug phone from PC.
2. Turn off phone. Remove the battery.
3. Start SP Flash Tool. Under "Scatter-loading," choose the MT6577_Android_scatter_emmc.txt. You will see that RECOVERY has a check beside it. Click on "Download." A warning will appear, proceed anyway.
4. With your phone still off and the battery out, plug it in to the PC. Flashing should start. It will only take a few seconds. You'll see a green circle when it's done.
5. Unplug USB cable and put the battery back.
6. Enter recovery mode by Power and Volume + button. Release both buttons when you see the boot menu. Use Volume + to highlight "recovery." Then use Volume - to confirm.
7. Click "Install." Choose the appropriate tab (internal or external SD card).
8. Select UPDATE-SuperSU-1.25 zip. Swipe to confirm the update. It will flash. Go back to main menu of TWRP.
9. Click "Reboot system." Wait until you are fully booted into your homesceen.
10. Once booted, you should see SuperSU in your app drawer.
credits to ish gridote
Click to expand...
Click to collapse
Hi. Can you please post a mirror on the twrp-omegahd.img file? All of the other files have been downloaded except for the img file. Error comes up.

bakes5981 said:
Bummer! I'm stuck at step 3!
-- umm... NO, I DON'T!! There must be a step that's missing... :-S
edit:
nevermind. I forgot to rename TWRP file to "recovery"
Thanks for this!
Click to expand...
Click to collapse
please hit thanks if this helps

OmegaXtremeHD link issues
OmegaXtremeHD link is not working .... 509 error .... any mirror or alternative links?

Wil53664 said:
Omega HD root
Disclaimer: I will not be liable for bricked devices. Follow these instructions at your own risk. ROOTING VOIDS WARRANTY, as per Cherry Mobile. Please be guided accordingly.
This tutorial is not recommended for newbies. Knowledge of basic adb and fastboot commands is helpful. Better if you have previously installed ADB drivers.
Downloads (http://www.mediafire.com/?ar2ccya8395d1):
SuperSU zip
TWRP ported by me
SP Flash Tool
MTK Drivers
MTK 6577 scatter file
if the driver didn't work download this http://www.4shared.com/zip/YXlLFoLm/6577driver_install_3_steps.html
install folder step 1 to 3
Place the scatter file and TWRP recovery in the SAME FOLDER.
rename twrp recovery to recovery.img
1. While the phone is still on, enable USB debugging (Settings > Developer options) then plug into PC. Allow drivers to install. Install the MTK drivers as well.
2. Mount phone as USB storage. Copy SuperSU zip to internal or external SD card. Unmount USB storage, then unplug phone from PC.
2. Turn off phone. Remove the battery.
3. Start SP Flash Tool. Under "Scatter-loading," choose the MT6577_Android_scatter_emmc.txt. You will see that RECOVERY has a check beside it. Click on "Download." A warning will appear, proceed anyway.
4. With your phone still off and the battery out, plug it in to the PC. Flashing should start. It will only take a few seconds. You'll see a green circle when it's done.
5. Unplug USB cable and put the battery back.
6. Enter recovery mode by Power and Volume + button. Release both buttons when you see the boot menu. Use Volume + to highlight "recovery." Then use Volume - to confirm.
7. Click "Install." Choose the appropriate tab (internal or external SD card).
8. Select UPDATE-SuperSU-1.25 zip. Swipe to confirm the update. It will flash. Go back to main menu of TWRP.
9. Click "Reboot system." Wait until you are fully booted into your homesceen.
10. Once booted, you should see SuperSU in your app drawer.
credits to ish gridote
OmegaXtremeHD
s3 bootanimation n sound
s3 boot logo
Jelly bean icons
iphone ringtones
google play music
dolphin browser
apex launcher
deodexed
busybox
init.d
signal tweaks
3g tweaks
battery tweaks
v6 supercharger
kickasskernel
crossbreeder
download link
https://www.dropbox.com/s/8q1c6db45uegepk/OmegaXtreme.zip
updated link
save rom in SD card
reboot to CWM/TWRP
WIPE DATA/FACTORY RESET
install rom via SD card
reboot
Click to expand...
Click to collapse
Hey buddy,
Where's the file..??

StanleyD said:
Hey buddy,
Where's the file..??
Click to expand...
Click to collapse
will update link later

having trouble with some apps working on my Omega HD. a couple of my Android mainstays are Haxsync and Swiftkey. on my Omega HD, they run no problem, but if the unit powers off for whatever reason, when I turn it back on, my Haxsync account (under Settings/Accounts) disappears, requiring me to set up the app again, and Swiftkey is no longer activated as my default input. any help?

|GUIDE| - HOMTOM HT6 - TWRP | ROOT | ROMs | MODs | DRIVERs | etc...

HOMTOM HT6 - 6250 Mah Battery - MT6735P 1,0 Ghz - 2 GB RAM - LTE - HotKnot -5,5" HD - Fastcharging​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​STOCK Firmware:
http://www.needrom.com/download/homtom-t6/
Latest ROM is R17 - 20160513. You can update through OTA too.
Download: R17: https://yadi.sk/d/4AOdC_9hv3ttR
Do not OTA update if you have ROOT. - You will be in BOOTLOOP
It seems we can use ROM from DOOGEE T6 on HOMTOM HT6 too - BUT PRELOADER MUST BE UNCHECKED IN SPFlashTool
Link here: R05https://yadi.sk/d/fI3Q3DFTmphbW
R06 https://yadi.sk/d/jEYTpiNpndYT4
Custom Recovery:
TWRP 2.8.7.0 https://mega.nz/#!mhpmnIBR!3lqqnuBxC3WkF-b7_kjsIV_VkONopYhtl4hbGfmawBE
TWRP 3.0 https://mega.nz/#!Ho5DCR5D!mMachkzvD5YrJcnH5c0mHgM5mlji09emsU8wy_ZbxFM
TWRP 3.0.2 https://mega.nz/#!P8JS0JjA!2xvaHwOKMNCvwaA-HC4a6hLEDt-vXUsimwjCNTLnA9o
CWM https://mega.nz/#!75B2HaLL!5SREt62m0O5EqI2-Qpx2X9_rWpMEebSZ_aeamvUTvB4
Thanks jemmini , Hanuma50 and kalipso888- 4PDA.ru
BEFORE FLASHING TWRP RECOVERY. MAKE SURE, YOU HAVE ENABLED "UNLOCK OEM" - UNLOCK BOOTLOADER - IN DEVELOPER OPTIONS.
Drivers:
I am using this drivers without problem
Please download all these drivers:
Handset WinDriver v1.00.00.31 (Drivers for ADB, MTP, USB Mass Storages, etc)
DriverAutoInstaller v1.1236.00 (Drivers for MediaTek USB VCOM)
MediaTek USB VCOM Driver v1.1123.00 (MTK VCOM driver for Win 8.1 x64)
If you have Win8/8.1/10 - you must install DriverAutoInstaller_v1.1236.00 manually. Go to:
xxxx\DriverAutoInstaller_v1.1236.00\SmartPhoneDriver\x64 or X86\Infs and select usbvcom.inf and usbvcom_brom.inf > right click and select install. Some messages will appear > close it with click on OK button.
Now you must go same way with Unsigned infs folder. Go to : xxx:\DriverAutoInstaller_v1.1236.00\SmartPhoneDriver\x64\Unsigned infs and select all .inf files > right click and select install. Some messages - unsigned driver will appear, just ignore it and close it with ok button.
You should not have any problem with drivers from first and third link.
Now you have all important drivers installed.
Thanks [email protected] for drivers.
Flashtool:
https://mega.nz/#!O05Q2ZSL!mOVtYCDD2qhEoCdmATj3UKWmxLRF5H7EDeg-sUMK6Q8
ROOT:
BEFORE ROOTING - MAKE SURE, YOU HAVE ENABLED "UNLOCK OEM" - UNLOCK BOOTLOADER - IN DEVELOPER OPTIONS.
For ROOT your device please download this ZIP and flash it in TWRP recovery.
https://download.chainfire.eu/696/SuperSU/
You can ROOT your HT6 in stock recovery too. - download this zip and flash it in stock recovery:
https://mega.nz/#!nppWFBxA!fqYIakLzpSkZPM2ck2cFcMwhn0hpuUwMRNIKTiQ2mIQ
Patches and Fixes for HomTom HT6:
HT6/T6 Power fix:
This patch is for fix battery percentage drops - flash in TWRP + wipe cache, dalvik
this patch will take effect after cca 3 full charges.
download: https://mega.nz/#!X0QyhYJS!8EWhkit69S0eni3uX3rdy3pe_oerf-jVkiAoouJixlQ
Thanks: Mardaly - 4PDA.ru
source: http://4pda.ru/forum/index.php?s=&showtopic=709131&view=findpost&p=50595464
Xposed Framework:
1) you must have TWRP recovery installed and you must have ROOT
download xposed here:
.apk : http://forum.xda-developers.com/attachment.php?attachmentid=3383776&d=1435601440
flashable .zip: in attachments
First install the apk, than flash the zip using twrp.
WARNING: First boot after install xposed will be very long - phone will be very long on android is upgrading screen and you will get a lot of reboot - 15, maybe more reboots. Dont worry, it is normal, after it xposed will work ok. Tested on my phone and all is ok.
screen - working xposed on ht6 - http://uploads.tapatalk-cdn.com/20160127/f11bc444bf2672c6d33141f71098f6df.jpg
For Xposed thanks to: Ryder55 @xda
If you like my work, please hit Thanks button.

HOMTOM HT6 - How to install TWRP recovery and ROOT this device.
Option 1 - Flashing TWRP and flashing supersu.zip
*NOTE: If you have ROOT, you can flash TWRP recovery via app Flashify - DL on google play.
1) download and install all drivers
2) download twrp recovery for HT6 and extract it somewhere.
3) download Flashtool
4) download supersu.zip and copy it in your sdcard.
5) turn phone off and prepare usb cable
6) open flashtool - http://postimg.org/image/929l19yjh/full/
7) select scatter file from extracted archive with twrp recovery for HT6 - http://postimg.org/image/6idy76azh/
8) make sure recovery is checked, select download only and click on download - http://postimg.org/image/siuanstnh/
9) now connect your phone via usb cable.
10) when flash is completed - green icon will appear - close it.
11) now you can unplug your phone and boot into TWRP
12) hold volume + and power in same time.
13) menu should appear, you can select recovery, bootloader, etc...
14) you can move in menu by pressing volume up. Volume down is confirm button.
15) select recovery
16) now you should be in twrp recovery.
17) select install, select supersu v2.46.zip and confirm flash.
18) now you have TWRP installed and ROOTED your HT6. You can go back, select reboot > system.
DONE.
Option 2 - flashing root via update.zip in stock recovery
1) download root update.zip and copy it on your sdcard after it go to settings> developer options > unlock oem and enable it.
2) turn off your phone
3) hold volume + and power in same time
4) in menu select recovery - move in menu by pressing volume + and confirm button in volume down button.
5) now you are in android recovery - now you must get acces in recovery menu.
6) hold power button and hit volume up button - menu should appear
7) select apply update from sdcard
8) select update.zip - in menu you can move via volume buttons - power is confirm button
9) confirm flash.
10) go back . . / and select reboot system now
11) now you have rooted your HT6 via stock recovery.
Option 3 - flashing root via update.zip -easiest way
1) download root update.zip from first post.
2) go to settings> developer options > unlock oem and enable it, after it go to settings>about phone > wirelles update
3) in right corner select ... (three dots) > select local updates and select update.zip
4) confirm update - phone reboots and install update automatically
5) You have ROOT

Custom ROMs​
Leagoo Elite 5 For HomTom HT6
Download ROM: https://drive.google.com/file/d/0B_WxPbXlWh9pUzBVdmE2dHFKOTA
Thanks: Keksik1980 - 4PDA for port.
bugs: -
YunOS 3.0.5 for HomTom HT6
Download ROM: https://yadi.sk/d/RAP0lnrytzcUX
Download camera fix: https://yadi.sk/d/ltn1w4vetzYN7
Thanks: Keksik1980 - 4PDA for port.
bugs: -
Languages: EN/RU
Resurrection Remix 5.5.9 for HomTom HT6
DL: https://yadi.sk/d/uzOOqngfu4YYY
Thanks: Keksik1980 - 4PDA for port.
bugs: ?
AOSP for HomTom HT6
DL:https://yadi.sk/d/TzRWvKedtxu8p
Thanks: Keksik1980 - 4PDA for port.
bugs: ?
CyanogenMod 12.1 for HomTom HT6
DL: https://yadi.sk/d/brKZT28-sRLdU
Thanks: lexa6074465 - 4PDA for port.
bugs: - camera works only on 8MP - no focus
HOMTOM HT6 Alternative Rom v3.0 Black Edition
source:http://4pda.ru/forum/index.php?showtopic=709131&st=1180#entry48056999
Download ROM:: https://yadi.sk/d/yfwbDvCXsJZo6
Patches:
-
Xposed:
flash zip: https://mega.nz/#!mxY1VLbK!jegzyjMEh8BG5TnhHQlSHjmmw2UgD6k74FDGY7B4e58
.apk: https://mega.nz/#!Ktg0xYTA!nXHfiEem64XKWjVJdz5wVEI3PGtdZUmn7Q52AVO6drM
first install .apk, after it flash zip.
Thanks [email protected]
-----------------------------------------------------------
AoROM v1 - MOD ROM from Oukitel K6000 for HT6
Thanks kalipso888 - 4pda.ru
Download ROMhttps://yadi.sk/d/dw8_W5g3oqYCA
Download Patch v1 - https://mega.nz/#!uooAwZSB!ENDXswGE8cOgM2S4mfzCV73QioPs_aFuSfgmwnfJAoA
Download better camera libs: https://mega.nz/#!Cx5kiaxB!cTinf0Fof7OaN6dqdkjDShTI9Q-wJCTnLGxScdD_TQY
Thanks madarly - 4pda.ru for patch, libs and sdfix
Thanks: 4pda.ru http://4pda.ru/forum/index.php?showtopic=709131&st=780#entry47119937
some changes:
Better camera quality
Better battery life
Better network managment
Dolby Atmos
Better performance
Faster and smoothest UI
Better speaker and headphone output quality
Faster wifi connection
Better RAM managment
Updated Google Apps
Lower phone temperature
Alarm working in quet mode
Better APN settings
DingDing Heat8 ROM for HT6
link: http://forum.xda-developers.com/showpost.php?p=65765910&postcount=123
HOMTOM HT6 - STOCK ROMs from DOOGEE T6 flashable in TWRP
Doogee T6-R06 DEODEX
https://yadi.sk/d/SW0I3rgFnicma
Doogee T6-R05 DEODEX_v1
https://yadi.sk/d/8Mch4uLOnjr94
Thanks to: mardaly @4pda.ru

Unbrick Tutorial / Back to STOCK ROM ​Here is unbrick/update tutorial for those who are in bootloop, or for those, who want to update or restore phone to stock ROM with SPFlashTool method.
*NOTE: READ!!!! All your files will be deleted. Please backup your internal storage.
This process will not format your SDcard.
*NOTE2: If you dont want to lose your phone data, you must uncheck userdata field in flashtool. - Step 4E
- This step is experimentall and it can cause problems and bad system stability. Please do not use this step if you are comming back to stock/official rom from custom rom.
- This step is possible to use, if you are restoring your phone from bootloop after OTA update on rooted phone.
---------------UNBRICK GUIDE-----------------
1) Download all important files:
A) Download all Drivers from first post and install it. - If you have win8/8.1/10 use my tutorial how to install it - in first post too. - here
B) Download latest STOCK ROM from here and extract it : http://www.needrom.com/download/homtom-t6/ (latest version is R17 - 20160513, maybe Homtom will release new updates, just download latest version - R17 here: https://yadi.sk/d/4AOdC_9hv3ttR)
C) Download flashtool from here and extract it: https://mega.nz/#!O05Q2ZSL!mOVtYCDD2qhEoCdmATj3UKWmxLRF5H7EDeg-sUMK6Q8
2)Power off your phone - if you are in bootloop just hold power button until phone power off.
3) Prepare original Homtom USB(charging) cable - Do NOT connect your phone in PC - I will tell you when you must connect your phone.
4) Follow this pictures:
A) In PC open Spflashtool folder and open Flashtool as administrator - http://s22.postimg.org/5na2xf4ip/ht6unbrick1.png
B) Press ok button - http://s22.postimg.org/ti7v9izkx/ht6unbrick2.png
C) Select scatter loading button - http://s22.postimg.org/ttpbmag0x/ht6unbrick3.png
D) Navigate to extracted STOCK ROM folder and sellect android scatter file - http://s22.postimg.org/y1k3v1hgh/ht6unbrick4.png
E) Make sure - all things like system,recovery,userdata,preloader,tee1,tee2,etc are checked, select download only and select Download button with green arrow. - http://s22.postimg.org/r261vohi9/ht6unbrick5.png
F) Make sure your phone is still powered OFF. Now you must connect phone to PC with Original USB cable
G) flashing proces should start - http://s22.postimg.org/ixxxqxv35/ht6unbrick6.png on the bottom of flashtool you can see yellow bar with percentage.
H) When process is finished - green symbol will appear - http://s22.postimg.org/8p5gl471d/ht6unbrick7.png
I) Now you can close this window, unplug your phone and close flashtool application.
J) You can power on your phone. First boot is little bit longer than normal boot, so just wait until android will boot completely.
K) Enjoy

Touchscreen Fix Tutorial ​By Spoooky1
I finally got success to recover my touchscreen so I submit my tutorial.
First, there is no need for some chineses softwares like 360??? (setup_10.2.0.2001a.exe or instmobilemgr.exe). The really most important is :
- a HT6 rooted
- a PC with adb drivers installed
- download HT6digitizer.zip, unzip it on the desktop (for instance)
Step 1 : power on the HT6 with a BT mouse (or a USB mouse plugged with OTG cable) and go to :
Settings -> Developer options -> enable Stay awake and USB debugging (both are very important !)
Step 2 : connect the HT6 and the PC with a USB cable
on the PC, go to HT6digitizer folder and launch a MSDOS window (in admin mode) then type adb devices inside
if your HT6 is unauthorized then take a look at your HT6 and go next step, else go to step 5
Step 3 : the most difficult without a BT mouse ! :crying:
This popup should appear and you have to select "Always allow from this computer" and click OK
Step 4 : If the previous job is well done, type again adb devices and now your HT6 is authorised (else disconnect the HT6 and go back to Step 2)
Step 5 : type adb shell ls /proc/gm* in the MSDOS window and NOTE the result (very important !!)
(the result is /proc/gmnode20160312 in my case)
Step 6 : On the PC, go to HT6digitizer folder and launch GtpAdbTool_ENU.exe (in admin mode)
Fill the popup with the previous result and click on Determine button
Step 7 : then IC type and IC version should appear. Click on Browse button
Step 8 : choose the GT9157_Config_20160305_225004.cfg file and click on Open (Ouvrir in french :angel: )
Step 9 : select Send config and click on Perform operation
Step 10 : Finish ! all is green, you can use your touchscreen
Special Thanks to : kalipso888 , Ax1qwer , flasource_ , Zeggi :good:

Hello.Does anyone know if this power bank http://www.banggood.com/Qualcomm-Ce...2W-Quick-Charge-2_0-Power-Bank-p-1004535.html support fast charge for homtom ht6?
or any other powerbank that supports it? Because now i have a romoss sense 4 which gives in output 5v 2.1A but ht6 charges very slow.

clio94 said:
Hello.Does anyone know if this power bank http://www.banggood.com/Qualcomm-Ce...2W-Quick-Charge-2_0-Power-Bank-p-1004535.html support fast charge for homtom ht6?
or any other powerbank that supports it? Because now i have a romoss sense 4 which gives in output 5v 2.1A but ht6 charges very slow.
Click to expand...
Click to collapse
Hi, I am using Xiaomi 10400mah powerbank and charging is fast.
HT6 using Mediatek Pump Express fast charging technology and I think it is not compatible with Qualcomm Quick charge. But maybe I am wrong.

TWRP flashing tutorial + root guide with pictures comming soon.

Hi! Using this smartphone I noticed that the data network connection (E, H+, 3G, 4G...) is shown REALLY LARGE in the status bar. Is there any way to make that disappear? Thanks!

Archah said:
Hi! Using this smartphone I noticed that the data network connection (E, H+, 3G, 4G...) is shown REALLY LARGE in the status bar. Is there any way to make that disappear? Thanks!
Click to expand...
Click to collapse
I think icon can be deleted via Xposed, but there is no working Xposed for HT6 now, we must wait for clear AOSP custom ROM, xposed should be running fine on it.
Now xposed is not working on HT6.
Edit: TWRP flashing and ROOTING tutorial added in second post

why you dont use option 2 . it is more easy ?

There is a third option at the root, load a package update.zip system in place upgrade, select the file and restart the phone.
@ Ax1qwer -Please add the 3 options - quick and easy

You can install Xposed using xposed 3.0 alpha 4 and flashing xposed 79__ver22.zip from twrp. You can find the how to on xda. Im currently running xposed on my HT6. Thanks for your flashing guide.
Easiest way to root the ht6 is to download update.zip for the stockrom, go to settings-about-wireless update-menu and select local update-choose the update.zip file and select update. It should flash from there.

Hi, thanks ozmatox and Ryder55. I will try xposed and i will add 3rd root option - it is same as option 2, but phone reboot to recovery and flash update.zip automatically
Odesláno z mého HT6 pomocí Tapatalk

Mobile rooted. Thx
Everyone have change dpi ? Witch dpi is compatible ?

Ryder55 said:
You can install Xposed using xposed 3.0 alpha 4 and flashing xposed 79__ver22.zip from twrp. You can find the how to on xda. Im currently running xposed on my HT6. Thanks for your flashing guide.
Easiest way to root the ht6 is to download update.zip for the stockrom, go to settings-about-wireless update-menu and select local update-choose the update.zip file and select update. It should flash from there.
Click to expand...
Click to collapse
Please give us a link for working xposed, thanks. I searched for google for xposed 79__ver22.zip, but no success. Thanks.
Edit: root via local updates added

http://forum.xda-developers.com/attachment.php?attachmentid=3383776&d=1435601440
This is the apk
http://forum.xda-developers.com/attachment.php?attachmentid=3580244&d=1450386592
This is the zip
First install the apk, then flash the zip using twrp. Hope the links work. I'm a bit new to xda
Sent from my HT6 using XDA Free mobile app

I installed xposed apk, after it I flashed TWRP via SPflash tool, I booted in TWRP and flashed xposed zip and supersu.zip, but my phone is in bootloop now. I am using latest R14 ROM., I think this xposed is not working on HT6.

Ax1qwer said:
I installed xposed apk, after it I flashed TWRP via SPflash tool, I booted in TWRP and flashed xposed zip and supersu.zip, but my phone is in bootloop now. I am using latest R14 ROM., I think this xposed is not working on HT6.
Click to expand...
Click to collapse
You should have installed SuperSU before flashing xposed. I am using the R14 firmware with xposed and running xprivacy so I know for sure that xposed is working. My phone has entered a form of bootloop where it tries to optimize apps but this doesnt happen very often and sometimes it ceases when left alone. Anyways those are the steps I followed to get xposed working.
Sent from my HT6 using XDA Free mobile app

Ryder55 said:
You should have installed SuperSU before flashing xposed. I am using the R14 firmware with xposed and running xprivacy so I know for sure that xposed is working. My phone has entered a form of bootloop where it tries to optimize apps but this doesnt happen very often and sometimes it ceases when left alone. Anyways those are the steps I followed to get xposed working.
Sent from my HT6 using XDA Free mobile app
Click to expand...
Click to collapse
Yes, I know - my mistake. I uninstalled Xposed and flashed it again, but still reboots on android is upgraging screen
EDIT: Many and many reboots, but it seems Xposed is working and phone boots up sucessfully But about 15, maybe more reboots.

Sony Xperia XZ Unlock bootloader, TWRP and ROOT.

For rooting Xperia XZ, we need recovery and for recovery flashing the bootloader must be unlocked.
PREREQUISITES:
1. ADB/FASTBOOT. View attachment 4715074
2. Drivers for Sony Xperia XZ. View attachment Xperia_XZ_driver.zip
3. Backup all your data, Apps, Contacts & everything you need.
4. Charge ur device above 60% to avoid any shutdown during the process
UNLOCKING BOOTLOADER
Unlock Bootloader: Opens the door to System files of your device. This allows you to flash images onto the main system partitions of the phone, after unlocking you will lose the DRM keys and phone's warranty will be void, it will also factory reset your device.(backup is recommended)
1. Open Dialer.
2. Dial *#*#7378423#*#*
3. Press service info than configuration.
4. Check if “Bootloader Unlock” is yes under Rooting status.[If not then your device can not be unlocked]
5. Check what android you are running on. Go to Settings -> About Phone -> Android Version. If you have 6.x.x then goto step 9 but if you have 7.x.x then you have to downgrade to Marshmallow.
6. Download and install FlashTool from its official website.
7. Install the drivers for fastmode and for your device in the driver folder of the FlashTool. [C:>FLASHTOOL>drivers]
8. Download ftf for your device using XpiriFirm and flash it using flashtool.
How to flash ftf?
9. Goto settings>about phone >developers option and ensure that OEM Unlock and USB Debugging is on.
10. Goto Xperia BLU page and Choose Xperia XZ at the bottom of the page.
11. Enter your Email and you will receive a link in your mail. Follow the steps given by Sony.
12. BE CAREFUL and, from now on, DON’T ENABLE the MyXperia. It could hard brick your phone.
Now your phone is unlocked
We will now go over some other fixes.
FLASH ANDRO PLUS KERNEL.
This kernel will help your device cope up with some battery issues and it also has some DRM Fixes. To install it, follow the steps :
1. Download the kernel version supported for your buildnumber.{AndroPlus}
2. Unzip the downloaded file and paste them into your fastboot/adb directory.
3. Now Boot into Bootloader mode by turning the device off and pressing volume up then plug in the USB.
4. Run the command prompt where you pasted the extracted zip . Do this by shift+right click and selecting Open command prompt here.
5. Enter the command "fastboot flash boot boot.img"(without double quotation)
6. Unplug and reboot your device
FLASH CUSTOM RECOVERY [TWRP]
A custom recovery is flashed onto the recovery partition of the device and overwrites the stock recovery that exists by default(XZ doesn't have stock recovery). Custom recoveries bring lots of functionality and allows you to perform wipes, install flashable zips, create full backups of your NAND (Nandroid backup), and various other features. An unlocked bootloader is needed to install a custom recovery.
This process will provide your device a custom recovery (TWRP) This can be used to flash root script, ROM and custom kernels at anytime without PC.
1. Download the TWRP image file.
2. Paste it in your Fastboot directory and rename it as recovery.img
3. Open cmd in the folder where you pasted recovery.img
4. Enter the command "fastboot flash recovery recovery.img"(without double quotation)
5. Reboot your device.
FLASHING MAGISK
Now the final step. To root your device you just need to flash the Magisk zip.
1. Download the zip.
2. Paste it in your device.
3. Now boot into recovery by turning off and press power+volume down at the same time and release the power key after vibration.
4. If TWRP is decrypted use this guide.
5. Now select install and navigate to the pasted zip, swipe for flash.
6. Reboot and check if the Magisk app is installed on your device.
________________________________________________________________________________________
-- If You Liked My Work--
-- Press the Thanks :good: Button --
​

Hi there.
May downgrade from N 7.1.1 to MM 6.0.1 causing lost DRM key ?
Thanks for your reply.

anhyeuviolet said:
Hi there.
May downgrade from N 7.1.1 to MM 6.0.1 causing lost DRM key ?
Thanks for your reply.
Click to expand...
Click to collapse
No downgrading not.
Drm keys r lost when u unlock bootloader

Have someone tried this guide????

awadnisar said:
No downgrading not.
Drm keys r lost when u unlock bootloader
Click to expand...
Click to collapse
This is my Screenshot from Security (inside Service test).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Do you have any idea ?
My XZ looks different to another pics from Internet.

anhyeuviolet said:
This is my Screenshot from Security (inside Service test).
My XZ looks different to another pics from Internet.
Click to expand...
Click to collapse
It should ...
Looks normal for a new device.
Check
Service Info -> Configuration -> Bootloader unlock allowed

DHGE said:
It should ...
Looks normal for a new device.
Check
Service Info -> Configuration -> Bootloader unlock allowed
Click to expand...
Click to collapse
Checked and it show:
Bootloader unlock allowed: Yes.
Is it ok ?

anhyeuviolet said:
Is it ok ?
Click to expand...
Click to collapse
For me: yes
For the larger part of Society? Hmmm :silly:
read my [Guide]

DHGE said:
For me: yes
For the larger part of Society? Hmmm :silly:
read my [Guide]
Click to expand...
Click to collapse
Mailed to Sony Support. They said that Okay, too.
If XZ is not lagging as it right now, I will be more satisfied.

Quick Info After Unlocking Bootloader
awadnisar said:
For rooting Xperia xz (DUAL), we need recovery and for recovery flashing the bootloader must be unlocked.
CONTINUE AT YOUR OWN RISK
PREREQUISITES
1. ADB/FASTBOOT. Download https://drive.google.com/open?id=0B4IlcVrKbV2qT1V1T2RFQmxXNU0
2. Drivers for Sony Xperia XZ. Download https://drive.google.com/open?id=0B4IlcVrKbV2qeloxN01ESkZZTkU
3. Backup all your data, Apps, contacts & everything your need. we need to create backup in order to restore if anything goes wrong. [hopefully not]
4. Charge ur device above 60% to avoid any shutdown during the process
UNLOCKING BOOTLOADER
Unlock Bootloader: Opens the door to System files of your device. This allows you to flash images onto the main system partitions of the phone, after unlocking you will lose the DRM keys and phone's warranty will be void, it will also factory reset your device.(backup is recommended)
1. Open your dialer.
2. Dial *#*#7378423#*#*
3. Press service info than configuration.
4. Check if “Bootloader Unlock” is yes under Rooting status.[If not then your device can not be unlocked]
5. Check what android you are running on. Go to Settings -> About Phone -> Android Version. If you have 6.x.x then goto step 9 but if you have 7.x.x then you have to downgrade to Marshmallow.
6. Download and install FlashTool from its official website. http://www.flashtool.net/downloads.php
7. Install the drivers for fastmode and for your device in the driver folder of the FlashTool. [C:>FLASHTOOL>drivers]
8. Download ftf for your device, for [F8332/dual (https://drive.google.com/open?id=0B4IlcVrKbV2qSnBCRWxHLWY5RjQ)] and flash it using flashtool.
how to flash ftf https://forum.xda-developers.com/xperia-z/general/tutorial-how-to-flash-stock-roms-t2240614
9. Goto settings>about phone >developers option and ensure that OEM Unlock and USB Debugging is on.
10. Goto (https://developer.sonymobile.com/unlockbootloader/unlock-yourboot-loader/) and Choose Xperia XZ at the bottom of the page.
11. Enter your Email and you will receive a link in your mail. Follow the steps given by Sony.
12. BE CAREFUL and, from now on, DON’T ENABLE the MyXperia. It could hard brick your phone.
Now your phone is unlocked
We will now go over some other fixes.
FLASH ANDRO PLUS KERNEL.
This kernel will help your device cope up with some battery issues and it also has some DRM Fixes. To install it, follow the steps :
1. Download the kernel https://github.com/AndroPlus-org/android_kernel_sony_msm8996
2. Unzip the downloaded file and paste them into your fastboot/adb directory.
3. Now Boot into Bootloader mode by turning the device off and pressing volume up then plug in the USB.
4. Run the command prompt where you pasted the extracted zip . Do this by shift+right click and selecting Open command prompt here.
5. Enter the command "fastboot flash boot boot.img"(without double quotation)
6. Unplug and reboot your device
FLASH CUSTOM RECOVERY [TWRP]
A custom recovery is flashed onto the recovery partition of the device and overwrites the stock recovery that exists by default(XZ doesn't have stock recovery). Custom recoveries bring lots of functionality and allows you to perform wipes, install flashable zips, create full backups of your NAND (Nandroid backup), and various other features. An unlocked bootloader is needed to install a custom recovery.
This process will provide your device a custom recovery (TWRP) This can be used to flash root script, ROM and custom kernels at anytime without PC.
1. Download the TWRP image file https://drive.google.com/open?id=0B4IlcVrKbV2qWF9QaDhPd2hONmc
2. Paste it in your Fastboot directory and rename it as recovery.img
3. Open cmd in the folder where you pasted recovery.img
4. Enter the command "fastboot flash recovery recovery.img"(without double quotation)
5. Reboot your device.
FLASH SUPER SU ZIP
Now the final step. To root your device you just need to flash the super su zip.
1. Download the zip. https://drive.google.com/open?id=0B4IlcVrKbV2qOExRekY3M3ZPVG8
2. Paste it in your device.
3. Now boot into recovery by turning off and press power+volume down at the same time and release the power key after vibration.
4. Now select install and navigate to the pasted zip, swipe for flash.
5. Reboot and check if the Super SU app is installed on your device.
Click to expand...
Click to collapse
Good Tutorial As Iam Quite Familiar With This Rooting Method I Would Like To Highlight a Line
2. Paste it in your Fastboot directory and rename it as recovery.img
Because it Is Necessary Guys Without Renaming It , It Would Be Difficult to Enter in TWRP Recovery.
Rename To "recovery.img" is Must to Replace The Stock With This One.
and To Enter TWRP MENU After Everything Done.-----> Follow The Steps. <------
1 - Completely Power OFF The Phone , ( You Can Also Power off the Phone Anytime By Holding VOLUME UP + POWER BUTTON For 5 Secs Until There is 3 Vibration. )
2 - Hold Volume Down + Power Button , After That SONY Logo is Shown , Then Release ONLY THE POWER KEY and KEEP HOLDING the VOLUME DOWN Button.
3 - Wait Till TWRP Appears and Start Doing What You Like.
I Hope This Info Helps To Beginners.

CALL ME SUBH said:
Good Tutorial As Iam Quite Familiar With This Rooting Method I Would Like To Highlight a Line
2. Paste it in your Fastboot directory and rename it as recovery.img
Because it Is Necessary Guys Without Renaming It , It Would Be Difficult to Enter in TWRP Recovery.
Rename To "recovery.img" is Must to Replace The Stock With This One.
and To Enter TWRP MENU After Everything Done.-----> Follow The Steps. <------
1 - Completely Power OFF The Phone , ( You Can Also Power off the Phone Anytime By Holding VOLUME UP + POWER BUTTON For 5 Secs Until There is 3 Vibration. )
2 - Hold Volume Down + Power Button , After That SONY Logo is Shown , Then Release ONLY THE POWER KEY and KEEP HOLDING the VOLUME DOWN Button.
3 - Wait Till TWRP Appears and Start Doing What You Like.
I Hope This Info Helps To Beginners.
Click to expand...
Click to collapse
Thanks, when i was writing the post i took too long so i can't explain each and every step.

awadnisar said:
Thanks, when i was writing the post i took too long so i can't explain each and every step.
Click to expand...
Click to collapse
No Prob Bro

Do I still need to downgrade to MM when I'm running latest version of Oreo?

odarpsahc said:
Do I still need to downgrade to MM when I'm running latest version of Oreo?
Click to expand...
Click to collapse
If you want Unlock bootloader, as I know, Yes.

magisk/super su
hi, how to install magisk instead of super su in marshmallow, thanks

ciqbalz said:
hi, how to install magisk instead of super su in marshmallow, thanks
Click to expand...
Click to collapse
Just install latest magisk zip

odarpsahc said:
Do I still need to downgrade to MM when I'm running latest version of Oreo?
Click to expand...
Click to collapse
Yes coz for unlocking bootloader it's necessary

awadnisar said:
Yes coz for unlocking bootloader it's necessary
Click to expand...
Click to collapse
Hmm.. Not really, if he wishes to save and back up his DRM keys then yes it is nessecary to downgrade but if he's not worried about them he can do everything from oreo, unlocking the BL, installing a Kernel, TWRP ect.... But let me be clear to save your DRM Keys you need to downgrade..

[RECOVERY] TWRP 3.2.1 For C701F/DS [STABLE]

Team Win Recovery Project
It's Compatibe with Snapdragon Variants Of C7 Pro Such as C701F and C701F/DD.
If it's not working with your device or you have different model let me know. I would Build a Different Version of Recovery for your Model.
#include <std_disclaimer.h>
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Special Notes:
1. READ THE GUIDE.
2. KNOX will be tripped once you flashed custom binaries to your phone.
(Your warranty may be voided. However, this may not affect you if your country, European Union, for example, forces Samsung to provide hardware warranty regardless of software status.)
More Infos: https://en.m.wikipedia.org/wiki/Rooting_the_Android_operating_system
3. Samsung Firmware OTA (aka System Updates) will no longer work once you flashed custom binaries.
(You can flash custom ROMs if you want to keep the OS up-to-date.)
4. It is HIGHLY UNRECOMMENDED to purchase any access to any kind of private forums, ROMs or Kernels.
(DO NOT GET FOOLED.)
5. You HAVE to use newer version of Odin (>3.13) if you want to flash stock ROMs.
Download:
Galaxy C7 Pro (C701F/DS):
https://androidfilehost.com/?w=files&flid=275664
Sources:
https://github.com/TeamWin
https://github.com/aapav01/android_device_samsung_c7proltedd-twrp
Changelog:
Check #2.
Guide:
Check #3.
Show your appreciation:
Click Thanks!, Rate 5-star or/and Donate to me.
(You Can donate me Steam Gift Cards)
To contribute:
TWRP Code Review
Github pull requests will be ignored.

Change log:
Note that this page only includes device-specific changes. For global TWRP changes, go to twrp.me.
June 12, 2018 (twrp-3.2.1-0):
Fixed MTP
Fixed encryption on ASOP ROM (Samsung is unsupported)
Enable NTFS Support
Fixed Mount Issues of partition
Add Support OREO ROMs
Added EFS Backup
And MORE

Guides:
Notice: It may wipe all your data including those in internal storage.
Part 1 - HOW-TO FLASH TWRP:
1. In your ROM, go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
2. Go to Settings -> Developer options and enable OEM Unlock option.
3. Download and Install Samsung Mobile Phones Drivers.
- Option 1: Download and Install Smart Switch for PC.
- Option 2: Download and Install standalone driver package.
4. Download and extract Odin (Samsung's Flash Tool) to your computer.
5. Download a .tar image of TWRP.
6. Reboot your device to download mode.
- Hold [VOLUME DOWN] + [HOME BUTTON] + [POWER] for approx. 15 seconds.
- Read the warning carefully.
- If you agree, press [VOLUME UP] to get into Download mode. If you don't agree, STOP.
7. Open Odin and place that TWRP tar file in the [AP] slot.
8. Connect your phone.
9. Hold [VOLUME UP] + [HOME BUTTON] + [POWER] on your phone and then press start on Odin.
10. Wait for the phone to reboot. DO NOT release [VOLUME UP] + [HOME BUTTON] + [POWER] or you may not reboot into TWRP.
Part 2 - HOW-TO INITIALIZE TWRP: (for new phones)
1. If you completed Part 1 successfully, you should be in TWRP now. At this point, you will reach the screen asking you if you want to allow system modifications.
2. Select "Keep /system RO". (Don't swipe right or you may not be able to boot into system if you failed to complete next steps. However, you can swipe right to allow modifications if you are confident that you can complete next steps.)
3. Go to "Wipe" menu of TWRP and you will find "Format Data". Press "Format Data" and type "yes" to continue.
4. Go to "Reboot" menu and Press "Recovery" to reboot TWRP.
5. Download the latest dm-verity and force encryption disabler zip on your computer.
6. Transfer the zip to your phone.
- Option 1: MTP: Connect your phone with computer and just copy the zip to internal storage. (similar to how you transfer files when in system.)
- Option 2: ADB: Connect your phone with computer and run command "adb push /path/to/zip /sdcard/".
- Option 3: External SD: Copy the zip to an external SD and then insert the card to your phone.
7. Go to "Install" menu of TWRP and flash the zip.
TWRP is initialized and fully functional at this stage. Now you can either reboot into system or root, flash custom ROMs via TWRP.
Part 3 - HOW-TO ROOT:
1. Download the flashable zip.
- Option 1: Magisk
- Option 2: SuperSU
2. Transfer the zip to your phone.
3. Go to "Install" menu of TWRP and flash the zip.
Part 3a - HOW-TO FLASH CUSTOM ROMS:
1. Download the flashable zip.
2. Transfer the zip to your phone.
3. Go to "Install" menu of TWRP and flash the zip.
Simple.

dear.......followed procedure....but... ( error is set warranty bit kernel..)...now any soln...pl reply..
thanxs with deep warm regards

I have the SM-C7018 version of this phone and, by following your guide, I was able to set up TWRP on Android 7.0 and flash GAPPS.
Thank you very much for this!
EDIT: Maybe it was just in my case, but for those of you that wish to install GAPPS on this device, keep in mind that you must not reset it to the factory conditions after installing GAPPS, as the Play services will FC once the phone boots up, and you will not be able to use it anymore. I had to re-flash the firmware. Also, I've used the Pico package, ARM x64, Android 7.0.
EDIT 2: Unfortunately, I couldn't manage to get the GApps working. The Google Framework Services would always crash when opening any google application for the first time or when trying to add the account from the Settings Menu. Anyone had any success with adding GApps on the Nougat firmware?

SPG30759 said:
dear.......followed procedure....but... ( error is set warranty bit kernel..)...now any soln...pl reply..
thanxs with deep warm regards
Click to expand...
Click to collapse
it's normal on samsung devices

aapav01 said:
it's normal on samsung devices
Click to expand...
Click to collapse
Hi, I did the steps you mentioned, but after completion I checked with Root Checker app it says "Root not installed properly". Do you know why?

My device is C7010. Can it use your TWRP as well?

c7 PRO c7018
Will this tprw work with c7018 model? and with c7018 + oreo?
aapav01 said:
Team Win Recovery Project
It's Compatibe with Snapdragon Variants Of C7 Pro Such as C701F and C701F/DD.
If it's not working with your device or you have different model let me know. I would Build a Different Version of Recovery for your Model.
#include <std_disclaimer.h>
Special Notes:
1. READ THE GUIDE.
2. KNOX will be tripped once you flashed custom binaries to your phone.
(Your warranty may be voided. However, this may not affect you if your country, European Union, for example, forces Samsung to provide hardware warranty regardless of software status.)
More Infos: https://en.m.wikipedia.org/wiki/Rooting_the_Android_operating_system
3. Samsung Firmware OTA (aka System Updates) will no longer work once you flashed custom binaries.
(You can flash custom ROMs if you want to keep the OS up-to-date.)
4. It is HIGHLY UNRECOMMENDED to purchase any access to any kind of private forums, ROMs or Kernels.
(DO NOT GET FOOLED.)
5. You HAVE to use newer version of Odin (>3.13) if you want to flash stock ROMs.
Download:
Galaxy C7 Pro (C701F/DS):
https://androidfilehost.com/?w=files&flid=275664
Sources:
https://github.com/TeamWin
https://github.com/aapav01/android_device_samsung_c7proltedd-twrp
Changelog:
Check #2.
Guide:
Check #3.
Show your appreciation:
Click Thanks!, Rate 5-star or/and Donate to me.
(You Can donate me Steam Gift Cards)
To contribute:
TWRP Code Review
Github pull requests will be ignored.
Click to expand...
Click to collapse

Can I use this to port TWRP for 10.or G
Specs of 10.or G
Snap 626
4gb ram
Also pls reply what hardware needs to be same for porting.
And does kernel matter in Porting these images???
Thanx in advance

@aapav01 plz make twrp for C7000 oreo
tnks

a7 2015
Can build for me this same rom its humble request

Thank you!

c7 pro twrp for oreo
hi
i have series gapps problem .
can you plz make one for c7 pro sm-c7018 oreo .
twrp has no version for it .
baseband version: c7018zmu2cri1
buildnumber: r16nw.c7018zmu2cri1.
2018/09/14
ty

phone stucked at samsung logo and set bit : kernal
I followed same step and my phone isnt booting now
stucked at samsung logo and yellow top right says set bit: kernal
please help

try this
ashokrathi said:
I followed same step and my phone isnt booting now
stucked at samsung logo and yellow top right says set bit: kernal
please help
Click to expand...
Click to collapse
try pressing vol down and power at same time time then phone goes to power off then switch from vol down to vol up holding the power button now as soon as screen display starts leave both buttons it will now boot into twrp recovery go to wipe format data and type yes then flash no dm verity and magisk as per instruction given

My device is C7010. Can it use your TWRP as well?

aapav01 said:
Guides:
Notice: It may wipe all your data including those in internal storage.
Part 1 - HOW-TO FLASH TWRP:
1. In your ROM, go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
2. Go to Settings -> Developer options and enable OEM Unlock option.
3. Download and Install Samsung Mobile Phones Drivers.
- Option 1: Download and Install Smart Switch for PC.
- Option 2: Download and Install standalone driver package.
4. Download and extract Odin (Samsung's Flash Tool) to your computer.
5. Download a .tar image of TWRP.
6. Reboot your device to download mode.
- Hold [VOLUME DOWN] + [HOME BUTTON] + [POWER] for approx. 15 seconds.
- Read the warning carefully.
- If you agree, press [VOLUME UP] to get into Download mode. If you don't agree, STOP.
7. Open Odin and place that TWRP tar file in the [AP] slot.
8. Connect your phone.
9. Hold [VOLUME UP] + [HOME BUTTON] + [POWER] on your phone and then press start on Odin.
10. Wait for the phone to reboot. DO NOT release [VOLUME UP] + [HOME BUTTON] + [POWER] or you may not reboot into TWRP.
Part 2 - HOW-TO INITIALIZE TWRP: (for new phones)
1. If you completed Part 1 successfully, you should be in TWRP now. At this point, you will reach the screen asking you if you want to allow system modifications.
2. Select "Keep /system RO". (Don't swipe right or you may not be able to boot into system if you failed to complete next steps. However, you can swipe right to allow modifications if you are confident that you can complete next steps.)
3. Go to "Wipe" menu of TWRP and you will find "Format Data". Press "Format Data" and type "yes" to continue.
4. Go to "Reboot" menu and Press "Recovery" to reboot TWRP.
5. Download the latest dm-verity and force encryption disabler zip on your computer.
6. Transfer the zip to your phone.
- Option 1: MTP: Connect your phone with computer and just copy the zip to internal storage. (similar to how you transfer files when in system.)
- Option 2: ADB: Connect your phone with computer and run command "adb push /path/to/zip /sdcard/".
- Option 3: External SD: Copy the zip to an external SD and then insert the card to your phone.
7. Go to "Install" menu of TWRP and flash the zip.
TWRP is initialized and fully functional at this stage. Now you can either reboot into system or root, flash custom ROMs via TWRP.
Part 3 - HOW-TO ROOT:
1. Download the flashable zip.
- Option 1: Magisk
- Option 2: SuperSU
2. Transfer the zip to your phone.
3. Go to "Install" menu of TWRP and flash the zip.
Part 3a - HOW-TO FLASH CUSTOM ROMS:
1. Download the flashable zip.
2. Transfer the zip to your phone.
3. Go to "Install" menu of TWRP and flash the zip.
Simple.
Click to expand...
Click to collapse
I want to try this but my phone (c701f-ds) never boots into download mode or recovery mode consistently. I bricked the phone trying to root it throught the magisk app, using this very version of twrp. I got it back. I was able to flash the original stock oreo rom using odin
But to get the phone back I didn't go through the (blue screen) Download Mode, Instaed I got into the recovery envoronment (very hit and miss) then chose to reboot into bootloader mode, where I saw it yellow at the top of the screen "download mode" but not the blue screen of the usual download mode.
In this bootloader/download mode environment I connected the phone to the laptop. Odin recognised the phone and I loaded the stock rom into AP, and the appropriate files into the other boxes (I used Home_CSC instead of CSS, essentila for getting VOLTE to work). It flashed successfully. (a status bar appeared on the phone which corresponded to the download process)
But that wasn't the method that anyone else recommended.
I would try flashing the twrp tar file in the same way but there is no guarentee I could get into the twrp environment since holding [VOLUME UP] + [HOME BUTTON] + [POWER] doesn't always, or even often, get me into recovery mode.
I can use adb to reboot into recovery and from there get into bootloader/download mode but not again if the os doesnt load
Any advice?
And you say that eventhough the phone is already in download mode, that after you connect the phone to the pc where odin is loaded and has initialized the tar file, you have to press and hold [VOLUME UP] + [HOME BUTTON] + [POWER] and then press start on Odin. Then continue to hold these 3 buttons till the phone reboots into twrp. Why not just press start on odin without holding these 3 buttons? If the phone just shuts off after flashing twrp, would turning it on by holding those 3 buttons bring the phone (except mine perhaps) into twrp recovery?
What happens if the phone doesn't boot into recovery/twrp? Is it bricked? And if it does boot into the os, could you use adb to get into twrp?
I am being cautious due to the difficulty in getting the phone back after bricking it last time and because there is no guarentee that an ke combos will definitely get my phone into recovery or download mode.
Help is appreciated.

Umidigi A3 Pro - TWRP & Stock Rom

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Reserved exclusively for the stock rom V1.0_20181122
Download the stock rom V1.0_20181122 at the following link :
https://mega.nz/#!yxkUVA4I!0exovcsKTXb75YIBZfrqDC6Ak01wsv_Bp3Nl5mGQ7o8
Download the TWRP at the following link :
https://mega.nz/#!G510QIbL!sbPzFXUi1Nw5mPFZZOsejeES7-togQxg9mrUNjAeWrA
Download "Disable_Dm-Verity_ForceEncrypt_12.16.2018.zip" at the following link :
https://mega.nz/#!a092gK4A!SYjKF4EUujCmCfkDG5LJL1vJygij0Ure4bFhxVuCjX0
Download "Bu_&_Ma.rar" (Busybox & Magisk) at the following link :
https://mega.nz/#!C9lUjCqT!fBoh8p1Jg7pwbVRg8KQWKKs-eXH1eHq67_IKb1IUyyw
Please follow very carefully all the next steps :
1) Copy "Disable_Dm-Verity_ForceEncrypt_12.16.2018.zip" onto your microSD.
2) Unrar "Bu_&_Ma.rar" and copy Busybox zip & Magisk zip onto your microSD.
3) Flash the stock rom V1.0_20181122 through SP Flash Tool.
I strongly recommend the "Firmware Upgrade" option (on SP Flash Tool).
4) Tap on Settings --> System --> About phone
5) Tap seven times on Build number
6) Then, tap on Developer options.
7) Enable OEM unlocking & USB debugging.
8) Unrar the TWRP rar.
9) Run SP Flash Tool.
10) Load the scatter file inside the twrp folder.
11) Select Download Only option.
12) Click Download.
13) Connect your turned off phone to the pc with USB cable.
14) When at 100% please disconnect the USB cable.
15) Enter onto twrp recovery (volume up + power buttons simultaneously).
FUNDAMENTAL STEP
16) Select the first white line with volume up.
17) Press volume down to confirm.
18) Select language
19) "enter password" tap on cancel
20) Tap on WIPE
21) Tap on FORMAT DATA (type yes).
Consideration :
FORMAT DATA will wipe your internal storage.
I suggest you to make a backup before to format Data.
22) Return to the twrp home screen.
VITAL STEP
23) Tap on Reboot and choose Recovery.
DO NOT reboot your device onto System !
Tap on Do Not Install.
24) Tap Install, Select Storage, Micro SDCard, OK.
25) Tap on "Disable_Dm-Verity_ForceEncrypt_12.16.2018.zip".
26) Swipe to confirm Flash.
Consideration about "Disable_Dm-Verity_ForceEncrypt_12.16.2018.zip" :
Many thanks to @Zackptg5 for this zip.
This zip disable Dm-Verity, Forced Encryption, and Disc Quota Disabler.
Like Zackptg5 says :
"This zip should be flashed after anything that modifies your boot img (like a custom kernel) but before magisk/supersu since this zip creates the files that tells magisk/supersu to not encrypt".
27) Tap on Magisk.zip
28) Tap on Busybox.zip
29) Swipe to confirm Flash.
30) Tap on Reboot (into System) and tap on Do Not Install.
31) Be patient.
32) Set up as new.
33) Tap on Settings --> System --> About phone
34) Tap seven times on Build number
35) Then, tap on Developer options.
36) Enable OEM unlocking & USB debugging.
EXTREMELY VITAL :
37) Tap on Magisk Manager.
38) Upgrade to full Magisk Manager.
NOW you can see NOT ROOTED phone :
39) Reboot the phone.
NOW you can see ROOTED phone :

UPDATE
UPDATE - NEW STOCK ROM & NEW TWRP
TWRP reserved exclusively for the stock rom V1.1_20181211
Download the NEW stock rom V1.1_20181211 at the following link :
https://mega.nz/#!G9kwVSrT!yiS38SKmPfOGkKSCfrum4OzD2T2SKpctmUBr3fIBPNo
Download the NEW TWRP at the following link :
https://mega.nz/#!uwkkQYCb!Sb5ObKguewDLDE0Z3ma4m-W5KjZ28TUiK6QbrCm3cN8

Update - 01
UPDATE - NEW TWRP 3.2.3-0
There are two TWRPs :
The first TWRP is reserved exclusively for the stock rom V1.0_20181122
The second TWRP is reserved exclusively for the stock rom V1.1_20181211
Please follow very carefully all the steps at the first post.
Both TWRPs are available on Needrom

UPDATE
UPDATE - NEW STOCK ROM & NEW TWRP
GUIDELINES FOR THE INSTALLATION OF THE OTA ZIP
Please follow carefully all the next steps in order to install properly the OTA zip :
1) Flash the stock rom V1.1_20181211 (Firmware Upgrade option on SP Flash Tool).
2) Set up as new.
3) Download the OTA zip (V1.2_20181221_update .rar) at the next link :
https://mega.nz/#!bpsxxCCb!k-G1ndw1iygOsr1VQ_IM1xhEcm-mMJAxoxHMTSqZk-s
4) Unrar the V1.2_20181221_update.rar
5) DO NOT unzip the update.zip
6) Copy the entire folder "V1.2_20181221_update" onto your microSD.
7) Turn off your phone.
8) Hit simultaneously volume up + power buttons.
9) Hit the volume up button to select Recovery mode.
10) Dead Android and red triangle error - NO PANIC
11) Hit simultaneously volume up + power buttons several times.
12) Hit the volume up or volume down buttons to move between the options.
13) Hit the power button to select any option.
14) Select Apply update from SD card.
15) Select the folder "V1.2_20181221_update" onto your microSD.
16) Select the update.zip
17) Hit power button to start the installation process.
18) Select Wipe data/factory reset --> Select Yes.
19) Select Wipe cache partition --> Select Yes.
20) Select Reboot system now.
21) Set up as new.
22) Tap on Settings --> System --> About phone
23) Tap seven times on Build number
24) Then, tap on Developer options.
25) Enable OEM unlocking & USB debugging.
TWRP :
A3_P-NEW-twrp_03.rar (ROOT STEPS AT FIRST POST)
The twrp is available on Needrom

I use umidigi A3. Will it work for me

answer
Toluene15 said:
I use umidigi A3. Will it work for me
Click to expand...
Click to collapse
Absolutely not.
This thread is reserved exclusively to the Umidigi A3 Pro

Can you help A3 users?

A3 Pro V1.2 LIGHT
Umidigi A3 Pro V1.2 LIGHT version
It is a debloated version of the original stock rom V1.2_20181221.
Added TWRP 3.2.3 and Simple Gallery.apk
In the original stock V1.2_20181221 the free space onto System is 155 MB
Instead, in the A3 Pro V1.2 LIGHT the free space onto System is 625 MB
Download the A3_Pro_V1.2-LITE.rar at the following link :
https://mega.nz/#!jsVTUCCQ!qg4WabDN5U2QKHaSDFWjYZNBrMFv2mSKoVQ6dszEMUA
Please follow very carefully all the next steps :
1) Flash the A3 Pro V1.2 LIGHT through SP Flash Tool.
I strongly recommend the "Firmware Upgrade" option (on SP Flash Tool).
2) Turn on your phone.
3) When the setup wizard will appear, turn off your phone.
4) Enter onto twrp recovery (volume up + power buttons simultaneously).
5) Select the first white line with volume up.
6) Press volume down to confirm.
7) Select language
8) "enter password" tap on cancel
9) Tap on WIPE
10) Tap on FORMAT DATA (type yes)
11) Return to the twrp main screen.
12) Tap on Reboot and choose System.
13) Complete all the requirements of the setup wizard.
14) Tap on Settings --> System --> About phone
15) Tap seven times on Build number
16) Then, tap on Developer options.
17) Enable OEM unlocking & USB debugging.
18) Tap on Magisk icon.
19) Upgrade to full Magisk Manager.
20) VITAL : Reboot the phone (it is needed for the fully functioning of Magisk).
21) Tap on the Play Store to update the apk.
In the Play Store, the first time that you update (apk), it takes a little time.
DO NOT update the A3 Pro V1.2 LIGHT to a newer version (no OTA)

Toluene15 said:
Can you help A3 users?
Click to expand...
Click to collapse
If somebody will take Lineage OS 16, it must be suitable for A3Pro and A3

Android pie custom rom
Great work in bringing twrp to our devices. It will be so much nicer if lineage 16 os or any other treble gsi custom rom running android 9 would work without ussd or sms issues on mtk devices like the a3 and a3 pro

answer
shifi_11 said:
Great work in bringing twrp to our devices. It will be so much nicer if lineage 16 os or any other treble gsi custom rom running android 9 would work without ussd or sms issues on mtk devices like the a3 and a3 pro
Click to expand...
Click to collapse
Also my A3 Pro V1.2 LIGHT version looks pretty sweet.
Regarding the Project Treble, I am already working on it.
But I cannot confirm anything at this point.
Please be patient (and fingers crossed).

Cleopatra Bianchi said:
Also my A3 Pro V1.2 LIGHT version looks pretty sweet.
Regarding the Project Treble, I am already working on it.
But I cannot confirm anything at this point.
Please be patient (and fingers crossed).
Click to expand...
Click to collapse
Thanks thats all i wanted to know. Waiting patiently.

Do I need to install each ROM in order, or can I just go straight to the light ROM?

answer
kd7eir said:
Do I need to install each ROM in order, or can I just go straight to the light ROM?
Click to expand...
Click to collapse
You can go straight to the light rom.
Follow very carefully all the steps at the 8th post.

Cleopatra Bianchi said:
You can go straight to the light rom.
Follow very carefully all the steps at the 8th post.
Click to expand...
Click to collapse
Thank you.

I went straight to the light ROM with no issues at all. Thank you for your work on this project.

Grande Cleopatra!
I've just bought the phone for my uncle, so I'll follow your thread with pleasure.

Thank you @Cleopatra Bianchi for working on this phone.
Very much appreciated.
Got the A3 Pro yesterday, connected WiFi, let it OTA update to V1.2_20181221.
Turned off, followed to OP directions to install TWRP and got it rooted with Magisk.
Works like a champ.
This is a really nice phone for the price ($99 on Amazon, minus some gift cards). We will see how it holds up in everyday use.

Bought Umidigi A3 Pro on Amazon for $95 free shipping.
Installing straight to the light rom then Magisk.
All work out, has no problems at all.
Thanks Cleopatra Bianchi...
Today 1/17/2019
***It is reduced price on Amazon $89.99 -%5 ( clip the coupon) = 85.50$ free shipping***

I think I bricked my A3 non Pro. I firmware upgraded the light rom with sp flash tool and it said ok.
Now screen stays black volume up + power doesn't work.