Umidigi A3 Pro - TWRP & Stock Rom - General Questions and Answers

Umidigi A3 Pro - TWRP & Stock Rom - General Questions and Answers

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Reserved exclusively for the stock rom V1.0_20181122
Download the stock rom V1.0_20181122 at the following link :
https://mega.nz/#!yxkUVA4I!0exovcsKTXb75YIBZfrqDC6Ak01wsv_Bp3Nl5mGQ7o8
Download the TWRP at the following link :
https://mega.nz/#!G510QIbL!sbPzFXUi1Nw5mPFZZOsejeES7-togQxg9mrUNjAeWrA
Download "Disable_Dm-Verity_ForceEncrypt_12.16.2018.zip" at the following link :
https://mega.nz/#!a092gK4A!SYjKF4EUujCmCfkDG5LJL1vJygij0Ure4bFhxVuCjX0
Download "Bu_&_Ma.rar" (Busybox & Magisk) at the following link :
https://mega.nz/#!C9lUjCqT!fBoh8p1Jg7pwbVRg8KQWKKs-eXH1eHq67_IKb1IUyyw
Please follow very carefully all the next steps :
1) Copy "Disable_Dm-Verity_ForceEncrypt_12.16.2018.zip" onto your microSD.
2) Unrar "Bu_&_Ma.rar" and copy Busybox zip & Magisk zip onto your microSD.
3) Flash the stock rom V1.0_20181122 through SP Flash Tool.
I strongly recommend the "Firmware Upgrade" option (on SP Flash Tool).
4) Tap on Settings --> System --> About phone
5) Tap seven times on Build number
6) Then, tap on Developer options.
7) Enable OEM unlocking & USB debugging.
8) Unrar the TWRP rar.
9) Run SP Flash Tool.
10) Load the scatter file inside the twrp folder.
11) Select Download Only option.
12) Click Download.
13) Connect your turned off phone to the pc with USB cable.
14) When at 100% please disconnect the USB cable.
15) Enter onto twrp recovery (volume up + power buttons simultaneously).
FUNDAMENTAL STEP
16) Select the first white line with volume up.
17) Press volume down to confirm.
18) Select language
19) "enter password" tap on cancel
20) Tap on WIPE
21) Tap on FORMAT DATA (type yes).
Consideration :
FORMAT DATA will wipe your internal storage.
I suggest you to make a backup before to format Data.
22) Return to the twrp home screen.
VITAL STEP
23) Tap on Reboot and choose Recovery.
DO NOT reboot your device onto System !
Tap on Do Not Install.
24) Tap Install, Select Storage, Micro SDCard, OK.
25) Tap on "Disable_Dm-Verity_ForceEncrypt_12.16.2018.zip".
26) Swipe to confirm Flash.
Consideration about "Disable_Dm-Verity_ForceEncrypt_12.16.2018.zip" :
Many thanks to @Zackptg5 for this zip.
This zip disable Dm-Verity, Forced Encryption, and Disc Quota Disabler.
Like Zackptg5 says :
"This zip should be flashed after anything that modifies your boot img (like a custom kernel) but before magisk/supersu since this zip creates the files that tells magisk/supersu to not encrypt".
27) Tap on Magisk.zip
28) Tap on Busybox.zip
29) Swipe to confirm Flash.
30) Tap on Reboot (into System) and tap on Do Not Install.
31) Be patient.
32) Set up as new.
33) Tap on Settings --> System --> About phone
34) Tap seven times on Build number
35) Then, tap on Developer options.
36) Enable OEM unlocking & USB debugging.
EXTREMELY VITAL :
37) Tap on Magisk Manager.
38) Upgrade to full Magisk Manager.
NOW you can see NOT ROOTED phone :
39) Reboot the phone.
NOW you can see ROOTED phone :

UPDATE
UPDATE - NEW STOCK ROM & NEW TWRP
TWRP reserved exclusively for the stock rom V1.1_20181211
Download the NEW stock rom V1.1_20181211 at the following link :
https://mega.nz/#!G9kwVSrT!yiS38SKmPfOGkKSCfrum4OzD2T2SKpctmUBr3fIBPNo
Download the NEW TWRP at the following link :
https://mega.nz/#!uwkkQYCb!Sb5ObKguewDLDE0Z3ma4m-W5KjZ28TUiK6QbrCm3cN8

Update - 01
UPDATE - NEW TWRP 3.2.3-0
There are two TWRPs :
The first TWRP is reserved exclusively for the stock rom V1.0_20181122
The second TWRP is reserved exclusively for the stock rom V1.1_20181211
Please follow very carefully all the steps at the first post.
Both TWRPs are available on Needrom

UPDATE
UPDATE - NEW STOCK ROM & NEW TWRP
GUIDELINES FOR THE INSTALLATION OF THE OTA ZIP
Please follow carefully all the next steps in order to install properly the OTA zip :
1) Flash the stock rom V1.1_20181211 (Firmware Upgrade option on SP Flash Tool).
2) Set up as new.
3) Download the OTA zip (V1.2_20181221_update .rar) at the next link :
https://mega.nz/#!bpsxxCCb!k-G1ndw1iygOsr1VQ_IM1xhEcm-mMJAxoxHMTSqZk-s
4) Unrar the V1.2_20181221_update.rar
5) DO NOT unzip the update.zip
6) Copy the entire folder "V1.2_20181221_update" onto your microSD.
7) Turn off your phone.
8) Hit simultaneously volume up + power buttons.
9) Hit the volume up button to select Recovery mode.
10) Dead Android and red triangle error - NO PANIC
11) Hit simultaneously volume up + power buttons several times.
12) Hit the volume up or volume down buttons to move between the options.
13) Hit the power button to select any option.
14) Select Apply update from SD card.
15) Select the folder "V1.2_20181221_update" onto your microSD.
16) Select the update.zip
17) Hit power button to start the installation process.
18) Select Wipe data/factory reset --> Select Yes.
19) Select Wipe cache partition --> Select Yes.
20) Select Reboot system now.
21) Set up as new.
22) Tap on Settings --> System --> About phone
23) Tap seven times on Build number
24) Then, tap on Developer options.
25) Enable OEM unlocking & USB debugging.
TWRP :
A3_P-NEW-twrp_03.rar (ROOT STEPS AT FIRST POST)
The twrp is available on Needrom

I use umidigi A3. Will it work for me

answer
Toluene15 said:
I use umidigi A3. Will it work for me
Click to expand...
Click to collapse
Absolutely not.
This thread is reserved exclusively to the Umidigi A3 Pro

Can you help A3 users?

A3 Pro V1.2 LIGHT
Umidigi A3 Pro V1.2 LIGHT version
It is a debloated version of the original stock rom V1.2_20181221.
Added TWRP 3.2.3 and Simple Gallery.apk
In the original stock V1.2_20181221 the free space onto System is 155 MB
Instead, in the A3 Pro V1.2 LIGHT the free space onto System is 625 MB
Download the A3_Pro_V1.2-LITE.rar at the following link :
https://mega.nz/#!jsVTUCCQ!qg4WabDN5U2QKHaSDFWjYZNBrMFv2mSKoVQ6dszEMUA
Please follow very carefully all the next steps :
1) Flash the A3 Pro V1.2 LIGHT through SP Flash Tool.
I strongly recommend the "Firmware Upgrade" option (on SP Flash Tool).
2) Turn on your phone.
3) When the setup wizard will appear, turn off your phone.
4) Enter onto twrp recovery (volume up + power buttons simultaneously).
5) Select the first white line with volume up.
6) Press volume down to confirm.
7) Select language
8) "enter password" tap on cancel
9) Tap on WIPE
10) Tap on FORMAT DATA (type yes)
11) Return to the twrp main screen.
12) Tap on Reboot and choose System.
13) Complete all the requirements of the setup wizard.
14) Tap on Settings --> System --> About phone
15) Tap seven times on Build number
16) Then, tap on Developer options.
17) Enable OEM unlocking & USB debugging.
18) Tap on Magisk icon.
19) Upgrade to full Magisk Manager.
20) VITAL : Reboot the phone (it is needed for the fully functioning of Magisk).
21) Tap on the Play Store to update the apk.
In the Play Store, the first time that you update (apk), it takes a little time.
DO NOT update the A3 Pro V1.2 LIGHT to a newer version (no OTA)

Toluene15 said:
Can you help A3 users?
Click to expand...
Click to collapse
If somebody will take Lineage OS 16, it must be suitable for A3Pro and A3

Android pie custom rom
Great work in bringing twrp to our devices. It will be so much nicer if lineage 16 os or any other treble gsi custom rom running android 9 would work without ussd or sms issues on mtk devices like the a3 and a3 pro

answer
shifi_11 said:
Great work in bringing twrp to our devices. It will be so much nicer if lineage 16 os or any other treble gsi custom rom running android 9 would work without ussd or sms issues on mtk devices like the a3 and a3 pro
Click to expand...
Click to collapse
Also my A3 Pro V1.2 LIGHT version looks pretty sweet.
Regarding the Project Treble, I am already working on it.
But I cannot confirm anything at this point.
Please be patient (and fingers crossed).

Cleopatra Bianchi said:
Also my A3 Pro V1.2 LIGHT version looks pretty sweet.
Regarding the Project Treble, I am already working on it.
But I cannot confirm anything at this point.
Please be patient (and fingers crossed).
Click to expand...
Click to collapse
Thanks thats all i wanted to know. Waiting patiently.

Do I need to install each ROM in order, or can I just go straight to the light ROM?

answer
kd7eir said:
Do I need to install each ROM in order, or can I just go straight to the light ROM?
Click to expand...
Click to collapse
You can go straight to the light rom.
Follow very carefully all the steps at the 8th post.

Cleopatra Bianchi said:
You can go straight to the light rom.
Follow very carefully all the steps at the 8th post.
Click to expand...
Click to collapse
Thank you.

I went straight to the light ROM with no issues at all. Thank you for your work on this project.

Grande Cleopatra!
I've just bought the phone for my uncle, so I'll follow your thread with pleasure.

Thank you @Cleopatra Bianchi for working on this phone.
Very much appreciated.
Got the A3 Pro yesterday, connected WiFi, let it OTA update to V1.2_20181221.
Turned off, followed to OP directions to install TWRP and got it rooted with Magisk.
Works like a champ.
This is a really nice phone for the price ($99 on Amazon, minus some gift cards). We will see how it holds up in everyday use.

Bought Umidigi A3 Pro on Amazon for $95 free shipping.
Installing straight to the light rom then Magisk.
All work out, has no problems at all.
Thanks Cleopatra Bianchi...
Today 1/17/2019
***It is reduced price on Amazon $89.99 -%5 ( clip the coupon) = 85.50$ free shipping***

I think I bricked my A3 non Pro. I firmware upgraded the light rom with sp flash tool and it said ok.
Now screen stays black volume up + power doesn't work.

Related

|GUIDE| - HOMTOM HT6 - TWRP | ROOT | ROMs | MODs | DRIVERs | etc...

HOMTOM HT6 - 6250 Mah Battery - MT6735P 1,0 Ghz - 2 GB RAM - LTE - HotKnot -5,5" HD - Fastcharging
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
STOCK Firmware:
http://www.needrom.com/download/homtom-t6/
Latest ROM is R17 - 20160513. You can update through OTA too.
Download: R17: https://yadi.sk/d/4AOdC_9hv3ttR
Do not OTA update if you have ROOT. - You will be in BOOTLOOP
It seems we can use ROM from DOOGEE T6 on HOMTOM HT6 too - BUT PRELOADER MUST BE UNCHECKED IN SPFlashTool
Link here: R05https://yadi.sk/d/fI3Q3DFTmphbW
R06 https://yadi.sk/d/jEYTpiNpndYT4
Custom Recovery:
TWRP 2.8.7.0 https://mega.nz/#!mhpmnIBR!3lqqnuBxC3WkF-b7_kjsIV_VkONopYhtl4hbGfmawBE
TWRP 3.0 https://mega.nz/#!Ho5DCR5D!mMachkzvD5YrJcnH5c0mHgM5mlji09emsU8wy_ZbxFM
TWRP 3.0.2 https://mega.nz/#!P8JS0JjA!2xvaHwOKMNCvwaA-HC4a6hLEDt-vXUsimwjCNTLnA9o
CWM https://mega.nz/#!75B2HaLL!5SREt62m0O5EqI2-Qpx2X9_rWpMEebSZ_aeamvUTvB4
Thanks jemmini , Hanuma50 and kalipso888- 4PDA.ru
BEFORE FLASHING TWRP RECOVERY. MAKE SURE, YOU HAVE ENABLED "UNLOCK OEM" - UNLOCK BOOTLOADER - IN DEVELOPER OPTIONS.
Drivers:
I am using this drivers without problem
Please download all these drivers:
Handset WinDriver v1.00.00.31 (Drivers for ADB, MTP, USB Mass Storages, etc)
DriverAutoInstaller v1.1236.00 (Drivers for MediaTek USB VCOM)
MediaTek USB VCOM Driver v1.1123.00 (MTK VCOM driver for Win 8.1 x64)
If you have Win8/8.1/10 - you must install DriverAutoInstaller_v1.1236.00 manually. Go to:
xxxx\DriverAutoInstaller_v1.1236.00\SmartPhoneDriver\x64 or X86\Infs and select usbvcom.inf and usbvcom_brom.inf > right click and select install. Some messages will appear > close it with click on OK button.
Now you must go same way with Unsigned infs folder. Go to : xxx:\DriverAutoInstaller_v1.1236.00\SmartPhoneDriver\x64\Unsigned infs and select all .inf files > right click and select install. Some messages - unsigned driver will appear, just ignore it and close it with ok button.
You should not have any problem with drivers from first and third link.
Now you have all important drivers installed.
Thanks [email protected] for drivers.
Flashtool:
https://mega.nz/#!O05Q2ZSL!mOVtYCDD2qhEoCdmATj3UKWmxLRF5H7EDeg-sUMK6Q8
ROOT:
BEFORE ROOTING - MAKE SURE, YOU HAVE ENABLED "UNLOCK OEM" - UNLOCK BOOTLOADER - IN DEVELOPER OPTIONS.
For ROOT your device please download this ZIP and flash it in TWRP recovery.
https://download.chainfire.eu/696/SuperSU/
You can ROOT your HT6 in stock recovery too. - download this zip and flash it in stock recovery:
https://mega.nz/#!nppWFBxA!fqYIakLzpSkZPM2ck2cFcMwhn0hpuUwMRNIKTiQ2mIQ
Patches and Fixes for HomTom HT6:
HT6/T6 Power fix:
This patch is for fix battery percentage drops - flash in TWRP + wipe cache, dalvik
this patch will take effect after cca 3 full charges.
download: https://mega.nz/#!X0QyhYJS!8EWhkit69S0eni3uX3rdy3pe_oerf-jVkiAoouJixlQ
Thanks: Mardaly - 4PDA.ru
source: http://4pda.ru/forum/index.php?s=&showtopic=709131&view=findpost&p=50595464
Xposed Framework:
1) you must have TWRP recovery installed and you must have ROOT
download xposed here:
.apk : http://forum.xda-developers.com/attachment.php?attachmentid=3383776&d=1435601440
flashable .zip: in attachments
First install the apk, than flash the zip using twrp.
WARNING: First boot after install xposed will be very long - phone will be very long on android is upgrading screen and you will get a lot of reboot - 15, maybe more reboots. Dont worry, it is normal, after it xposed will work ok. Tested on my phone and all is ok.
screen - working xposed on ht6 - http://uploads.tapatalk-cdn.com/20160127/f11bc444bf2672c6d33141f71098f6df.jpg
For Xposed thanks to: Ryder55 @xda
If you like my work, please hit Thanks button.

HOMTOM HT6 - How to install TWRP recovery and ROOT this device.
Option 1 - Flashing TWRP and flashing supersu.zip
*NOTE: If you have ROOT, you can flash TWRP recovery via app Flashify - DL on google play.
1) download and install all drivers
2) download twrp recovery for HT6 and extract it somewhere.
3) download Flashtool
4) download supersu.zip and copy it in your sdcard.
5) turn phone off and prepare usb cable
6) open flashtool - http://postimg.org/image/929l19yjh/full/
7) select scatter file from extracted archive with twrp recovery for HT6 - http://postimg.org/image/6idy76azh/
8) make sure recovery is checked, select download only and click on download - http://postimg.org/image/siuanstnh/
9) now connect your phone via usb cable.
10) when flash is completed - green icon will appear - close it.
11) now you can unplug your phone and boot into TWRP
12) hold volume + and power in same time.
13) menu should appear, you can select recovery, bootloader, etc...
14) you can move in menu by pressing volume up. Volume down is confirm button.
15) select recovery
16) now you should be in twrp recovery.
17) select install, select supersu v2.46.zip and confirm flash.
18) now you have TWRP installed and ROOTED your HT6. You can go back, select reboot > system.
DONE.
Option 2 - flashing root via update.zip in stock recovery
1) download root update.zip and copy it on your sdcard after it go to settings> developer options > unlock oem and enable it.
2) turn off your phone
3) hold volume + and power in same time
4) in menu select recovery - move in menu by pressing volume + and confirm button in volume down button.
5) now you are in android recovery - now you must get acces in recovery menu.
6) hold power button and hit volume up button - menu should appear
7) select apply update from sdcard
8) select update.zip - in menu you can move via volume buttons - power is confirm button
9) confirm flash.
10) go back . . / and select reboot system now
11) now you have rooted your HT6 via stock recovery.
Option 3 - flashing root via update.zip -easiest way
1) download root update.zip from first post.
2) go to settings> developer options > unlock oem and enable it, after it go to settings>about phone > wirelles update
3) in right corner select ... (three dots) > select local updates and select update.zip
4) confirm update - phone reboots and install update automatically
5) You have ROOT

Custom ROMs
Leagoo Elite 5 For HomTom HT6
Download ROM: https://drive.google.com/file/d/0B_WxPbXlWh9pUzBVdmE2dHFKOTA
Thanks: Keksik1980 - 4PDA for port.
bugs: -
YunOS 3.0.5 for HomTom HT6
Download ROM: https://yadi.sk/d/RAP0lnrytzcUX
Download camera fix: https://yadi.sk/d/ltn1w4vetzYN7
Thanks: Keksik1980 - 4PDA for port.
bugs: -
Languages: EN/RU
Resurrection Remix 5.5.9 for HomTom HT6
DL: https://yadi.sk/d/uzOOqngfu4YYY
Thanks: Keksik1980 - 4PDA for port.
bugs: ?
AOSP for HomTom HT6
DL:https://yadi.sk/d/TzRWvKedtxu8p
Thanks: Keksik1980 - 4PDA for port.
bugs: ?
CyanogenMod 12.1 for HomTom HT6
DL: https://yadi.sk/d/brKZT28-sRLdU
Thanks: lexa6074465 - 4PDA for port.
bugs: - camera works only on 8MP - no focus
HOMTOM HT6 Alternative Rom v3.0 Black Edition
source:http://4pda.ru/forum/index.php?showtopic=709131&st=1180#entry48056999
Download ROM:: https://yadi.sk/d/yfwbDvCXsJZo6
Patches:
-
Xposed:
flash zip: https://mega.nz/#!mxY1VLbK!jegzyjMEh8BG5TnhHQlSHjmmw2UgD6k74FDGY7B4e58
.apk: https://mega.nz/#!Ktg0xYTA!nXHfiEem64XKWjVJdz5wVEI3PGtdZUmn7Q52AVO6drM
first install .apk, after it flash zip.
Thanks [email protected]
-----------------------------------------------------------
AoROM v1 - MOD ROM from Oukitel K6000 for HT6
Thanks kalipso888 - 4pda.ru
Download ROMhttps://yadi.sk/d/dw8_W5g3oqYCA
Download Patch v1 - https://mega.nz/#!uooAwZSB!ENDXswGE8cOgM2S4mfzCV73QioPs_aFuSfgmwnfJAoA
Download better camera libs: https://mega.nz/#!Cx5kiaxB!cTinf0Fof7OaN6dqdkjDShTI9Q-wJCTnLGxScdD_TQY
Thanks madarly - 4pda.ru for patch, libs and sdfix
Thanks: 4pda.ru http://4pda.ru/forum/index.php?showtopic=709131&st=780#entry47119937
some changes:
Better camera quality
Better battery life
Better network managment
Dolby Atmos
Better performance
Faster and smoothest UI
Better speaker and headphone output quality
Faster wifi connection
Better RAM managment
Updated Google Apps
Lower phone temperature
Alarm working in quet mode
Better APN settings
DingDing Heat8 ROM for HT6
link: http://forum.xda-developers.com/showpost.php?p=65765910&postcount=123
HOMTOM HT6 - STOCK ROMs from DOOGEE T6 flashable in TWRP
Doogee T6-R06 DEODEX
https://yadi.sk/d/SW0I3rgFnicma
Doogee T6-R05 DEODEX_v1
https://yadi.sk/d/8Mch4uLOnjr94
Thanks to: mardaly @4pda.ru

Unbrick Tutorial / Back to STOCK ROM Here is unbrick/update tutorial for those who are in bootloop, or for those, who want to update or restore phone to stock ROM with SPFlashTool method.
*NOTE: READ!!!! All your files will be deleted. Please backup your internal storage.
This process will not format your SDcard.
*NOTE2: If you dont want to lose your phone data, you must uncheck userdata field in flashtool. - Step 4E
- This step is experimentall and it can cause problems and bad system stability. Please do not use this step if you are comming back to stock/official rom from custom rom.
- This step is possible to use, if you are restoring your phone from bootloop after OTA update on rooted phone.
---------------UNBRICK GUIDE-----------------
1) Download all important files:
A) Download all Drivers from first post and install it. - If you have win8/8.1/10 use my tutorial how to install it - in first post too. - here
B) Download latest STOCK ROM from here and extract it : http://www.needrom.com/download/homtom-t6/ (latest version is R17 - 20160513, maybe Homtom will release new updates, just download latest version - R17 here: https://yadi.sk/d/4AOdC_9hv3ttR)
C) Download flashtool from here and extract it: https://mega.nz/#!O05Q2ZSL!mOVtYCDD2qhEoCdmATj3UKWmxLRF5H7EDeg-sUMK6Q8
2)Power off your phone - if you are in bootloop just hold power button until phone power off.
3) Prepare original Homtom USB(charging) cable - Do NOT connect your phone in PC - I will tell you when you must connect your phone.
4) Follow this pictures:
A) In PC open Spflashtool folder and open Flashtool as administrator - http://s22.postimg.org/5na2xf4ip/ht6unbrick1.png
B) Press ok button - http://s22.postimg.org/ti7v9izkx/ht6unbrick2.png
C) Select scatter loading button - http://s22.postimg.org/ttpbmag0x/ht6unbrick3.png
D) Navigate to extracted STOCK ROM folder and sellect android scatter file - http://s22.postimg.org/y1k3v1hgh/ht6unbrick4.png
E) Make sure - all things like system,recovery,userdata,preloader,tee1,tee2,etc are checked, select download only and select Download button with green arrow. - http://s22.postimg.org/r261vohi9/ht6unbrick5.png
F) Make sure your phone is still powered OFF. Now you must connect phone to PC with Original USB cable
G) flashing proces should start - http://s22.postimg.org/ixxxqxv35/ht6unbrick6.png on the bottom of flashtool you can see yellow bar with percentage.
H) When process is finished - green symbol will appear - http://s22.postimg.org/8p5gl471d/ht6unbrick7.png
I) Now you can close this window, unplug your phone and close flashtool application.
J) You can power on your phone. First boot is little bit longer than normal boot, so just wait until android will boot completely.
K) Enjoy

Touchscreen Fix Tutorial By Spoooky1
I finally got success to recover my touchscreen so I submit my tutorial.
First, there is no need for some chineses softwares like 360??? (setup_10.2.0.2001a.exe or instmobilemgr.exe). The really most important is :
- a HT6 rooted
- a PC with adb drivers installed
- download HT6digitizer.zip, unzip it on the desktop (for instance)
Step 1 : power on the HT6 with a BT mouse (or a USB mouse plugged with OTG cable) and go to :
Settings -> Developer options -> enable Stay awake and USB debugging (both are very important !)
Step 2 : connect the HT6 and the PC with a USB cable
on the PC, go to HT6digitizer folder and launch a MSDOS window (in admin mode) then type adb devices inside
if your HT6 is unauthorized then take a look at your HT6 and go next step, else go to step 5
Step 3 : the most difficult without a BT mouse ! :crying:
This popup should appear and you have to select "Always allow from this computer" and click OK
Step 4 : If the previous job is well done, type again adb devices and now your HT6 is authorised (else disconnect the HT6 and go back to Step 2)
Step 5 : type adb shell ls /proc/gm* in the MSDOS window and NOTE the result (very important !!)
(the result is /proc/gmnode20160312 in my case)
Step 6 : On the PC, go to HT6digitizer folder and launch GtpAdbTool_ENU.exe (in admin mode)
Fill the popup with the previous result and click on Determine button
Step 7 : then IC type and IC version should appear. Click on Browse button
Step 8 : choose the GT9157_Config_20160305_225004.cfg file and click on Open (Ouvrir in french :angel: )
Step 9 : select Send config and click on Perform operation
Step 10 : Finish ! all is green, you can use your touchscreen
Special Thanks to : kalipso888 , Ax1qwer , flasource_ , Zeggi :good:

Hello.Does anyone know if this power bank http://www.banggood.com/Qualcomm-Ce...2W-Quick-Charge-2_0-Power-Bank-p-1004535.html support fast charge for homtom ht6?
or any other powerbank that supports it? Because now i have a romoss sense 4 which gives in output 5v 2.1A but ht6 charges very slow.

clio94 said:
Hello.Does anyone know if this power bank http://www.banggood.com/Qualcomm-Ce...2W-Quick-Charge-2_0-Power-Bank-p-1004535.html support fast charge for homtom ht6?
or any other powerbank that supports it? Because now i have a romoss sense 4 which gives in output 5v 2.1A but ht6 charges very slow.
Click to expand...
Click to collapse
Hi, I am using Xiaomi 10400mah powerbank and charging is fast.
HT6 using Mediatek Pump Express fast charging technology and I think it is not compatible with Qualcomm Quick charge. But maybe I am wrong.

TWRP flashing tutorial + root guide with pictures comming soon.

Hi! Using this smartphone I noticed that the data network connection (E, H+, 3G, 4G...) is shown REALLY LARGE in the status bar. Is there any way to make that disappear? Thanks!

Archah said:
Hi! Using this smartphone I noticed that the data network connection (E, H+, 3G, 4G...) is shown REALLY LARGE in the status bar. Is there any way to make that disappear? Thanks!
Click to expand...
Click to collapse
I think icon can be deleted via Xposed, but there is no working Xposed for HT6 now, we must wait for clear AOSP custom ROM, xposed should be running fine on it.
Now xposed is not working on HT6.
Edit: TWRP flashing and ROOTING tutorial added in second post

why you dont use option 2 . it is more easy ?

There is a third option at the root, load a package update.zip system in place upgrade, select the file and restart the phone.
@ Ax1qwer -Please add the 3 options - quick and easy

You can install Xposed using xposed 3.0 alpha 4 and flashing xposed 79__ver22.zip from twrp. You can find the how to on xda. Im currently running xposed on my HT6. Thanks for your flashing guide.
Easiest way to root the ht6 is to download update.zip for the stockrom, go to settings-about-wireless update-menu and select local update-choose the update.zip file and select update. It should flash from there.

Hi, thanks ozmatox and Ryder55. I will try xposed and i will add 3rd root option - it is same as option 2, but phone reboot to recovery and flash update.zip automatically
Odesláno z mého HT6 pomocí Tapatalk

Mobile rooted. Thx
Everyone have change dpi ? Witch dpi is compatible ?

Ryder55 said:
You can install Xposed using xposed 3.0 alpha 4 and flashing xposed 79__ver22.zip from twrp. You can find the how to on xda. Im currently running xposed on my HT6. Thanks for your flashing guide.
Easiest way to root the ht6 is to download update.zip for the stockrom, go to settings-about-wireless update-menu and select local update-choose the update.zip file and select update. It should flash from there.
Click to expand...
Click to collapse
Please give us a link for working xposed, thanks. I searched for google for xposed 79__ver22.zip, but no success. Thanks.
Edit: root via local updates added

http://forum.xda-developers.com/attachment.php?attachmentid=3383776&d=1435601440
This is the apk
http://forum.xda-developers.com/attachment.php?attachmentid=3580244&d=1450386592
This is the zip
First install the apk, then flash the zip using twrp. Hope the links work. I'm a bit new to xda
Sent from my HT6 using XDA Free mobile app

I installed xposed apk, after it I flashed TWRP via SPflash tool, I booted in TWRP and flashed xposed zip and supersu.zip, but my phone is in bootloop now. I am using latest R14 ROM., I think this xposed is not working on HT6.

Ax1qwer said:
I installed xposed apk, after it I flashed TWRP via SPflash tool, I booted in TWRP and flashed xposed zip and supersu.zip, but my phone is in bootloop now. I am using latest R14 ROM., I think this xposed is not working on HT6.
Click to expand...
Click to collapse
You should have installed SuperSU before flashing xposed. I am using the R14 firmware with xposed and running xprivacy so I know for sure that xposed is working. My phone has entered a form of bootloop where it tries to optimize apps but this doesnt happen very often and sometimes it ceases when left alone. Anyways those are the steps I followed to get xposed working.
Sent from my HT6 using XDA Free mobile app

Ryder55 said:
You should have installed SuperSU before flashing xposed. I am using the R14 firmware with xposed and running xprivacy so I know for sure that xposed is working. My phone has entered a form of bootloop where it tries to optimize apps but this doesnt happen very often and sometimes it ceases when left alone. Anyways those are the steps I followed to get xposed working.
Sent from my HT6 using XDA Free mobile app
Click to expand...
Click to collapse
Yes, I know - my mistake. I uninstalled Xposed and flashed it again, but still reboots on android is upgraging screen
EDIT: Many and many reboots, but it seems Xposed is working and phone boots up sucessfully But about 15, maybe more reboots.

[RECOVERY] TWRP 3.2.1 For C701F/DS [STABLE]

Team Win Recovery Project
It's Compatibe with Snapdragon Variants Of C7 Pro Such as C701F and C701F/DD.
If it's not working with your device or you have different model let me know. I would Build a Different Version of Recovery for your Model.
#include <std_disclaimer.h>
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Special Notes:
1. READ THE GUIDE.
2. KNOX will be tripped once you flashed custom binaries to your phone.
(Your warranty may be voided. However, this may not affect you if your country, European Union, for example, forces Samsung to provide hardware warranty regardless of software status.)
More Infos: https://en.m.wikipedia.org/wiki/Rooting_the_Android_operating_system
3. Samsung Firmware OTA (aka System Updates) will no longer work once you flashed custom binaries.
(You can flash custom ROMs if you want to keep the OS up-to-date.)
4. It is HIGHLY UNRECOMMENDED to purchase any access to any kind of private forums, ROMs or Kernels.
(DO NOT GET FOOLED.)
5. You HAVE to use newer version of Odin (>3.13) if you want to flash stock ROMs.
Download:
Galaxy C7 Pro (C701F/DS):
https://androidfilehost.com/?w=files&flid=275664
Sources:
https://github.com/TeamWin
https://github.com/aapav01/android_device_samsung_c7proltedd-twrp
Changelog:
Check #2.
Guide:
Check #3.
Show your appreciation:
Click Thanks!, Rate 5-star or/and Donate to me.
(You Can donate me Steam Gift Cards)
To contribute:
TWRP Code Review
Github pull requests will be ignored.

Change log:
Note that this page only includes device-specific changes. For global TWRP changes, go to twrp.me.
June 12, 2018 (twrp-3.2.1-0):
Fixed MTP
Fixed encryption on ASOP ROM (Samsung is unsupported)
Enable NTFS Support
Fixed Mount Issues of partition
Add Support OREO ROMs
Added EFS Backup
And MORE

Guides:
Notice: It may wipe all your data including those in internal storage.
Part 1 - HOW-TO FLASH TWRP:
1. In your ROM, go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
2. Go to Settings -> Developer options and enable OEM Unlock option.
3. Download and Install Samsung Mobile Phones Drivers.
- Option 1: Download and Install Smart Switch for PC.
- Option 2: Download and Install standalone driver package.
4. Download and extract Odin (Samsung's Flash Tool) to your computer.
5. Download a .tar image of TWRP.
6. Reboot your device to download mode.
- Hold [VOLUME DOWN] + [HOME BUTTON] + [POWER] for approx. 15 seconds.
- Read the warning carefully.
- If you agree, press [VOLUME UP] to get into Download mode. If you don't agree, STOP.
7. Open Odin and place that TWRP tar file in the [AP] slot.
8. Connect your phone.
9. Hold [VOLUME UP] + [HOME BUTTON] + [POWER] on your phone and then press start on Odin.
10. Wait for the phone to reboot. DO NOT release [VOLUME UP] + [HOME BUTTON] + [POWER] or you may not reboot into TWRP.
Part 2 - HOW-TO INITIALIZE TWRP: (for new phones)
1. If you completed Part 1 successfully, you should be in TWRP now. At this point, you will reach the screen asking you if you want to allow system modifications.
2. Select "Keep /system RO". (Don't swipe right or you may not be able to boot into system if you failed to complete next steps. However, you can swipe right to allow modifications if you are confident that you can complete next steps.)
3. Go to "Wipe" menu of TWRP and you will find "Format Data". Press "Format Data" and type "yes" to continue.
4. Go to "Reboot" menu and Press "Recovery" to reboot TWRP.
5. Download the latest dm-verity and force encryption disabler zip on your computer.
6. Transfer the zip to your phone.
- Option 1: MTP: Connect your phone with computer and just copy the zip to internal storage. (similar to how you transfer files when in system.)
- Option 2: ADB: Connect your phone with computer and run command "adb push /path/to/zip /sdcard/".
- Option 3: External SD: Copy the zip to an external SD and then insert the card to your phone.
7. Go to "Install" menu of TWRP and flash the zip.
TWRP is initialized and fully functional at this stage. Now you can either reboot into system or root, flash custom ROMs via TWRP.
Part 3 - HOW-TO ROOT:
1. Download the flashable zip.
- Option 1: Magisk
- Option 2: SuperSU
2. Transfer the zip to your phone.
3. Go to "Install" menu of TWRP and flash the zip.
Part 3a - HOW-TO FLASH CUSTOM ROMS:
1. Download the flashable zip.
2. Transfer the zip to your phone.
3. Go to "Install" menu of TWRP and flash the zip.
Simple.

dear.......followed procedure....but... ( error is set warranty bit kernel..)...now any soln...pl reply..
thanxs with deep warm regards

I have the SM-C7018 version of this phone and, by following your guide, I was able to set up TWRP on Android 7.0 and flash GAPPS.
Thank you very much for this!
EDIT: Maybe it was just in my case, but for those of you that wish to install GAPPS on this device, keep in mind that you must not reset it to the factory conditions after installing GAPPS, as the Play services will FC once the phone boots up, and you will not be able to use it anymore. I had to re-flash the firmware. Also, I've used the Pico package, ARM x64, Android 7.0.
EDIT 2: Unfortunately, I couldn't manage to get the GApps working. The Google Framework Services would always crash when opening any google application for the first time or when trying to add the account from the Settings Menu. Anyone had any success with adding GApps on the Nougat firmware?

SPG30759 said:
dear.......followed procedure....but... ( error is set warranty bit kernel..)...now any soln...pl reply..
thanxs with deep warm regards
Click to expand...
Click to collapse
it's normal on samsung devices

aapav01 said:
it's normal on samsung devices
Click to expand...
Click to collapse
Hi, I did the steps you mentioned, but after completion I checked with Root Checker app it says "Root not installed properly". Do you know why?

My device is C7010. Can it use your TWRP as well?

c7 PRO c7018
Will this tprw work with c7018 model? and with c7018 + oreo?
aapav01 said:
Team Win Recovery Project
It's Compatibe with Snapdragon Variants Of C7 Pro Such as C701F and C701F/DD.
If it's not working with your device or you have different model let me know. I would Build a Different Version of Recovery for your Model.
#include <std_disclaimer.h>
Special Notes:
1. READ THE GUIDE.
2. KNOX will be tripped once you flashed custom binaries to your phone.
(Your warranty may be voided. However, this may not affect you if your country, European Union, for example, forces Samsung to provide hardware warranty regardless of software status.)
More Infos: https://en.m.wikipedia.org/wiki/Rooting_the_Android_operating_system
3. Samsung Firmware OTA (aka System Updates) will no longer work once you flashed custom binaries.
(You can flash custom ROMs if you want to keep the OS up-to-date.)
4. It is HIGHLY UNRECOMMENDED to purchase any access to any kind of private forums, ROMs or Kernels.
(DO NOT GET FOOLED.)
5. You HAVE to use newer version of Odin (>3.13) if you want to flash stock ROMs.
Download:
Galaxy C7 Pro (C701F/DS):
https://androidfilehost.com/?w=files&flid=275664
Sources:
https://github.com/TeamWin
https://github.com/aapav01/android_device_samsung_c7proltedd-twrp
Changelog:
Check #2.
Guide:
Check #3.
Show your appreciation:
Click Thanks!, Rate 5-star or/and Donate to me.
(You Can donate me Steam Gift Cards)
To contribute:
TWRP Code Review
Github pull requests will be ignored.
Click to expand...
Click to collapse

Can I use this to port TWRP for 10.or G
Specs of 10.or G
Snap 626
4gb ram
Also pls reply what hardware needs to be same for porting.
And does kernel matter in Porting these images???
Thanx in advance

@aapav01 plz make twrp for C7000 oreo
tnks

a7 2015
Can build for me this same rom its humble request

Thank you!

c7 pro twrp for oreo
hi
i have series gapps problem .
can you plz make one for c7 pro sm-c7018 oreo .
twrp has no version for it .
baseband version: c7018zmu2cri1
buildnumber: r16nw.c7018zmu2cri1.
2018/09/14
ty

phone stucked at samsung logo and set bit : kernal
I followed same step and my phone isnt booting now
stucked at samsung logo and yellow top right says set bit: kernal
please help

try this
ashokrathi said:
I followed same step and my phone isnt booting now
stucked at samsung logo and yellow top right says set bit: kernal
please help
Click to expand...
Click to collapse
try pressing vol down and power at same time time then phone goes to power off then switch from vol down to vol up holding the power button now as soon as screen display starts leave both buttons it will now boot into twrp recovery go to wipe format data and type yes then flash no dm verity and magisk as per instruction given

My device is C7010. Can it use your TWRP as well?

aapav01 said:
Guides:
Notice: It may wipe all your data including those in internal storage.
Part 1 - HOW-TO FLASH TWRP:
1. In your ROM, go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
2. Go to Settings -> Developer options and enable OEM Unlock option.
3. Download and Install Samsung Mobile Phones Drivers.
- Option 1: Download and Install Smart Switch for PC.
- Option 2: Download and Install standalone driver package.
4. Download and extract Odin (Samsung's Flash Tool) to your computer.
5. Download a .tar image of TWRP.
6. Reboot your device to download mode.
- Hold [VOLUME DOWN] + [HOME BUTTON] + [POWER] for approx. 15 seconds.
- Read the warning carefully.
- If you agree, press [VOLUME UP] to get into Download mode. If you don't agree, STOP.
7. Open Odin and place that TWRP tar file in the [AP] slot.
8. Connect your phone.
9. Hold [VOLUME UP] + [HOME BUTTON] + [POWER] on your phone and then press start on Odin.
10. Wait for the phone to reboot. DO NOT release [VOLUME UP] + [HOME BUTTON] + [POWER] or you may not reboot into TWRP.
Part 2 - HOW-TO INITIALIZE TWRP: (for new phones)
1. If you completed Part 1 successfully, you should be in TWRP now. At this point, you will reach the screen asking you if you want to allow system modifications.
2. Select "Keep /system RO". (Don't swipe right or you may not be able to boot into system if you failed to complete next steps. However, you can swipe right to allow modifications if you are confident that you can complete next steps.)
3. Go to "Wipe" menu of TWRP and you will find "Format Data". Press "Format Data" and type "yes" to continue.
4. Go to "Reboot" menu and Press "Recovery" to reboot TWRP.
5. Download the latest dm-verity and force encryption disabler zip on your computer.
6. Transfer the zip to your phone.
- Option 1: MTP: Connect your phone with computer and just copy the zip to internal storage. (similar to how you transfer files when in system.)
- Option 2: ADB: Connect your phone with computer and run command "adb push /path/to/zip /sdcard/".
- Option 3: External SD: Copy the zip to an external SD and then insert the card to your phone.
7. Go to "Install" menu of TWRP and flash the zip.
TWRP is initialized and fully functional at this stage. Now you can either reboot into system or root, flash custom ROMs via TWRP.
Part 3 - HOW-TO ROOT:
1. Download the flashable zip.
- Option 1: Magisk
- Option 2: SuperSU
2. Transfer the zip to your phone.
3. Go to "Install" menu of TWRP and flash the zip.
Part 3a - HOW-TO FLASH CUSTOM ROMS:
1. Download the flashable zip.
2. Transfer the zip to your phone.
3. Go to "Install" menu of TWRP and flash the zip.
Simple.
Click to expand...
Click to collapse
I want to try this but my phone (c701f-ds) never boots into download mode or recovery mode consistently. I bricked the phone trying to root it throught the magisk app, using this very version of twrp. I got it back. I was able to flash the original stock oreo rom using odin
But to get the phone back I didn't go through the (blue screen) Download Mode, Instaed I got into the recovery envoronment (very hit and miss) then chose to reboot into bootloader mode, where I saw it yellow at the top of the screen "download mode" but not the blue screen of the usual download mode.
In this bootloader/download mode environment I connected the phone to the laptop. Odin recognised the phone and I loaded the stock rom into AP, and the appropriate files into the other boxes (I used Home_CSC instead of CSS, essentila for getting VOLTE to work). It flashed successfully. (a status bar appeared on the phone which corresponded to the download process)
But that wasn't the method that anyone else recommended.
I would try flashing the twrp tar file in the same way but there is no guarentee I could get into the twrp environment since holding [VOLUME UP] + [HOME BUTTON] + [POWER] doesn't always, or even often, get me into recovery mode.
I can use adb to reboot into recovery and from there get into bootloader/download mode but not again if the os doesnt load
Any advice?
And you say that eventhough the phone is already in download mode, that after you connect the phone to the pc where odin is loaded and has initialized the tar file, you have to press and hold [VOLUME UP] + [HOME BUTTON] + [POWER] and then press start on Odin. Then continue to hold these 3 buttons till the phone reboots into twrp. Why not just press start on odin without holding these 3 buttons? If the phone just shuts off after flashing twrp, would turning it on by holding those 3 buttons bring the phone (except mine perhaps) into twrp recovery?
What happens if the phone doesn't boot into recovery/twrp? Is it bricked? And if it does boot into the os, could you use adb to get into twrp?
I am being cautious due to the difficulty in getting the phone back after bricking it last time and because there is no guarentee that an ke combos will definitely get my phone into recovery or download mode.
Help is appreciated.

MiUi 12 Global Pure Stock Rom with few Mods (OrangeFox/TWRP) Backup

MiUi 12 Global Pure Stock Rom with few Mods (OrangeFox/TWRP) Backup
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Description
Few Things Added In Stock MiUi 12
. Inbuild GCam Support
. WiFi + Hotspot will work at same time
. No Root By Default But You Can Install Magisk For ROOT
Instructions
FLASHING TWRP
1. Download TWRP Recovery LINK
2. Download & Extract Fastboot + ADB Folder LINK
3. Copy the TWRP Recovery file inside Fastboot + ADB Folder.
4. Switch off the phone, after that press & hold [Volume Down & Power Button] now ur Bootloader Screen will appear
5. Connect phone to PC.
6. Open the Fastboot + ADB Folder after that open file "Cmd Here".
7. Type "fastboot flash recovery TWRP" & press "tab Key then Enter Key".
8. After flashing is complete, Disconnect your Phone.
9. then press [Volume up & Power Button] to boot into TWRP Recovery
10. Now u have successfully flashed TWRP Recovery in ur Phone...
FLASHING OrangeFox
1. Download OrangeFox Recovery LINK
2. Download & Extract Fastboot + ADB Folder LINK
3. Switch off the phone, after that press & hold [Volume Down & Power Button] now ur Bootloader Screen will appear
4. Connect phone to PC.
5. Open the Fastboot + ADB Folder after that open file "Cmd Here".
6. Type "fastboot boot recovery" & press "tab Key then Enter Key".
7. Now dont disconnect your data cable
8. Your phone will boot into custom recovery mode now copy your OrangeFox zip File from your PC to Mobile.
9. after that flash OrangeFox zip file from mobile
10. after flashing Automatically OrangeFox Will ReBoot into Recovery Mode
11. Now u have successfully flashed OrangeFox Recovery in ur Phone.....
RESTORE TWRP/OrangeFox BACK FILES :
1. After flashing Custom Recovery
2. Download TWRP/OrangeFox Backup file GDrive LINK
3. Extract in PC then COPY the file in SD Card
4. Go to Recovery click on "Wipe" then "advanced wipe"
5. then select [all except sd card & Otg] after that swipe to wipe
6. click on Select Storage , select MicroSD Card
7. now u will see a folder of MiUi 12 Backup..........click on it
8. select swipe to RESTORE
9. click on Reboot System
10. NOW your system will boot in Miui 12.....enjoy
Download GCam apk - LINK
How to Root
1. Download and install as apk file Magisk v22.1 = LINK
Version Information
System Version : MiUi Global 12.0.2.0 Stable
ROM OS Version: Android 9 Pie
Based On: Stock MiUi 12 OS
Status: Stable

1. Orangefox Recovery - Folder name (Fox)
2. TWRP Recovery - Folder name (TWRP)
rename the main folder according to your installed recovery after extracting the RAR file

reserved.

Does it support atmos+viper?

rbarts said:
Does it support atmos+viper?
Click to expand...
Click to collapse
Yeah but by default its a pure stock rom with no root but if you want root access flash magisk

gourabpa said:
by default its a pure stock rom with no root but if you want root access flash magisk
Click to expand...
Click to collapse
Thanks for the info. I'm looking for a new ROM because my Magisk installed in my device is outdated and I want to try other options.

All links are Updated

req
when update again bro?

Can share the screen shots of the rom
How does it actually look

Be Careful !!!
Windows Defender report :
Trojan:AndroidOS/BoxerSms in : system.ext4.win001->(GZip)->/system/priv-app/SharedStorageBackup/SharedStorageBackup.apk and vendor.ext4.win->(GZip)->/overlay/CmccMmsTheme/CmccMmsRes.apk
and Trojan:AndroidOS/AndroRat in : system.ext4.win001->(GZip)->/system/priv-app/dpmserviceapp/dpmserviceapp.apk

ferreol-fr said:
Be Careful !!!
Windows Defender report :
Trojan:AndroidOS/BoxerSms in : system.ext4.win001->(GZip)->/system/priv-app/SharedStorageBackup/SharedStorageBackup.apk and vendor.ext4.win->(GZip)->/overlay/CmccMmsTheme/CmccMmsRes.apk
and Trojan:AndroidOS/AndroRat in : system.ext4.win001->(GZip)->/system/priv-app/dpmserviceapp/dpmserviceapp.apk
Click to expand...
Click to collapse
Lmao windows defender... that still exist lool what a joke, wasted .... try some serious AV... I don't say there isn't a virus, but defender is a bad joke..
You make my day loool.
To be sure put that files on virustotal...

drnightshadow said:
Lmao windows defender... that still exist lool what a joke, wasted .... try some serious AV... I don't say there isn't a virus, but defender is a bad joke..
You make my day loool.
To be sure put that files on virustotal...
Click to expand...
Click to collapse
Hello,
Sorry for my suspicious report. (but glad to make you loool)
Your are right Windows Defender is the only engine on virustotal to detect this files :cyclops:
Defender is not so bad for Windows files, but I agree it's really not a reference with android files
I've also verifed dpmserviceapp.apk on my xiaomi.eu 11.2 rom with the same result.

Will I be able able to revert to miui 10.3.2 if I restore this backup. Additionally, once restore rom, can I restore apps and data from previous miui version?

gourabpa said:
MiUi 11 Global Pure Stock Rom with few Mods (OrangeFox/TWRP) Backup
Description
Few Things Added In Stock MiUi 11
. Inbuild GCam Support
. WiFi + Hotspot will work at same time
. No Root By Default But You Can Install Magisk For ROOT
Instructions
FLASHING TWRP
1. Download TWRP Recovery LINK
2. Download & Extract Fastboot + ADB Folder LINK
3. Copy the TWRP Recovery file inside Fastboot + ADB Folder.
4. Switch off the phone, after that press & hold [Volume Down & Power Button] now ur Bootloader Screen will appear
5. Connect phone to PC.
6. Open the Fastboot + ADB Folder after that open file "Cmd Here".
7. Type "fastboot flash recovery TWRP" & press "tab Key then Enter Key".
8. After flashing is complete, Disconnect your Phone.
9. then press [Volume up & Power Button] to boot into TWRP Recovery
10. Now u have successfully flashed TWRP Recovery in ur Phone...
FLASHING OrangeFox
1. Download OrangeFox Recovery LINK
2. Download & Extract Fastboot + ADB Folder LINK
3. Switch off the phone, after that press & hold [Volume Down & Power Button] now ur Bootloader Screen will appear
4. Connect phone to PC.
5. Open the Fastboot + ADB Folder after that open file "Cmd Here".
6. Type "fastboot boot recovery" & press "tab Key then Enter Key".
7. Now dont disconnect your data cable
8. Your phone will boot into custom recovery mode now copy your OrangeFox zip File from your PC to Mobile.
9. after that flash OrangeFox zip file from mobile
10. after flashing Automatically OrangeFox Will ReBoot into Recovery Mode
11. Now u have successfully flashed OrangeFox Recovery in ur Phone.....
RESTORE TWRP/OrangeFox BACK FILES :
1. After flashing Custom Recovery
2. Download TWRP Backup file MEGA LINK
3. Download OrangeFox Backup file MEGA LINK
3. Extract in PC then COPY the file in SD Card
4. Go to Recovery click on "Wipe" then "advanced wipe"
5. then select [all except sd card & Otg] after that swipe to wipe
6. after that click on Select Storage , select MicroSD Card
7. now u will see a folder of MiUi 11 Global Stock Rom Backup..........click on it
8. after that select swipe to RESTORE
9. after that click on Reboot System
10. NOW your system will boot in Miui 11.....enjoy
How to Root
1. Download and Flash Magisk v20.3 from custom Recovery LINK
2. Install as apk after flashing (Magisk.zip) Magisk Manager v7.5.1 = LINK
Version Information
System Version : MiUi Global 11.0.3 Stable
ROM OS Version: Andriod 9 Pie
Based On: Stock MiUi 11 OS
Status: Stable
Click to expand...
Click to collapse
Any chance you still have a copy of that 3.3.1-3 TWRP? All links on XDA/Google seem to be dead for that particular build, and it was the only one that didn't have the stupid Pin/Pattern, Pattern/Pin bug. Even the latest TWRP (3.5.1) still has that bug.
Thanks.

Thread Updated...
MiUi Updated Version from 11 to 12.0.2.0
all the link are added in 1st Page

New MiUi 12 Backup Uploaded You can try it
1. Orangefox Recovery - Folder name (Fox)
2. TWRP Recovery - Folder name (TWRP)
rename the main folder according to your installed recovery after extracting the RAR file
mik101 said:
Any chance you still have a copy of that 3.3.1-3 TWRP? All links on XDA/Google seem to be dead for that particular build, and it was the only one that didn't have the stupid Pin/Pattern, Pattern/Pin bug. Even the latest TWRP (3.5.1) still has that bug.
Thanks.
Click to expand...
Click to collapse

what is this rom ?

AhmedAlaa01 said:
what is this rom ?
Click to expand...
Click to collapse
Its a MiUi 12 Global Stock ROM TWRP/Orangefox recovery backup file....
Wifi + hotspot duel stanby & gcam support added

Updated to MiUi 12 last build
Skylark1790 said:
when update again bro?
Click to expand...
Click to collapse

gourabpa said:
Its a MiUi 12 Global Stock ROM TWRP/Orangefox recovery backup file....
Wifi + hotspot duel stanby & gcam support added
Click to expand...
Click to collapse
can you tell me how enable gcam , i enable "persist.camera.HAL3.enabled " but it doesn't work good

Sony Xperia C3/C3 Dual CyanogenMod 12 Stable ROM

Hello this is @ruzukun02dev, here's how to install tutorial the CyanogenMod 12 Stable ROM on Sony Xperia C3.
Credit to the original owner: @DS1884
Tested model on my device: D2533 / Xperia C3 (AOSP)
Android Ver.: 5.1.1
CyanogenMod version: 12.1-20151128-UNOFFICIAL-wukong
("wukong" codename for device in Sony Xperia C3)
===== Working =====
RIL(Wifi, SIM 1, Data etc.)
GPS
NFC
Camera
All sensors except(see not working)
===== Not Working =====
Accelerometer
Brightness Control
Offline Charging
If your device with different model, why don't your try? Others will testing it with Sony Xperia C3
⚠ WARNING! ⚠
DO AT YOUR OWN RISK
IT IS NOT RESPONSIBLE TO DAMAGE YOUR DEVICE
Link for video tutorial:
===== REQUIREMENTS =====
*Sony Xperia Flash Tool (Important needed)
If don't have it, link here
*Bootloader device ready (Important needed)
If don't have it, it will not work and installation failed. link tutorial for bootloader for Sony Xperia C3 here.
Step by Step text tutorial:
Power off your device (For non-CM users)
1.) Extract all the files, except the GAPPS zip file
2.) Open your Sony Xperia Flash Tool, click fastboot mode
3.) click "select kernel to flash" find the folder 2, then ready select "recovery.img" but don't click it when your not connect to device.
4.) Connect the USB into the computer
*Method 1: Connect your device, Click "Reboot into fastboot mode (via ADB)", then blue light is working, meaning you connected the fastboot mode.
*Method 2: Hold the volume up button, plug the USB cable, then blue light is working, meaning you connected the fastboot mode.
5.) When the device is connected, click "recovery.img" wait until the flash finishes
6.) When finished flashing....
Method 1: Unplug your device, turn on your device, it will automatically boots the TWRP recovery
Method 2: click "Reboot device into system", unplug your device, it will automatically boots the TWRP recovery
7.) On TWRP, tap "wipe", tap "advanced wipe" and wipe all on your device, including system, davik cache, internal storage, etc....
8.) when your done, turn off your device and then
[Same instructions as Step 4] or go to reboot in TWRP, and press "bootloader" to reboots the bootloader mode.
9.) go to fastboot mode again in Sony Xperia Flash Tool, click "select kernel to flash" find the folder 1, then select "boot.img" to flash it. wait until the flash finishes
10.) when finished, click "select system to flash" find the folder 1, then select "system.img" to flash it. wait until the flash finishes
11.) When finished flashing
Method 1: Unplug your device, turn on your device, it will automatically boots the CM 12.1 Stable ROM
Method 2: click "Reboot device into system", unplug your device, it will automatically boots the CM 12.1 Stable ROM
Enjoy!
===== INSTALL GOOGLE APPS =====
Important: Let the boot on your custom rom device. when your finished, turn off your device.
[Do the same as Step 2 to 6 to installing custom rom section]
1.) On TWRP, tap "mount", tap "enable MTP" and will appear the device internal storage on your computer, plug your USB into your computer
2.) Go to folder 3, copy the zip files into the internal storage, when your done copying, unplug it.
3.) Tap install, install the files including "open_gapps-arm-5.1-nano-20170910.zip" wait until finishes.
[Do the same as Step 8 to 11 to installing custom rom section]
Let the boot on your custom rom device to optimize the google apps and services. when your finished, you have sucessfully custom rom with google services!
Enjoy Again!
Download Links:
Mega Link 1: https://mega.nz/file/ODZ1QYqa#Y7oQy25gzlsr7ZL6MOH_Z2mwXY1ucTyeZoGcUnLTsn4
Mega Link 2: https://mega.nz/file/GLQTFQDD#dJ8hSkO3N6_qtqs6rgJpaiTjQyEs1jE_pvuOwNfYpG8
Tips:
For not working screen rotation, Use "Rotation control" App on the Google Play Store. Download it here: https://play.google.com/store/apps/details?id=org.crape.rotationcontrol
For Brightness, Go to settings > Display and Lights > LiveDisplay > Adjust the color calibration RGB together to make it brightness setting lower to higher.
Original posted link:
[STABLE][5.1.1/9]CUSTOM ROM PROJECT FOR XPERIA C3 DUAL
So this phone is basically abandoned, but since I have this phone along with some time(in future), I am working on its resurrection. So, my project was initially based off of Cyanogen Mod 12.1, then with some libs found here and there, I am...
forum.xda-developers.com
Preview Photos:
Phone Xperia C3
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Screenshots:
Be sure to subscribe to my YT channel
Katsurou Downloads
https://youtube.com/channel/UCyA7PJWqz_z9dzK7-mmGA2w
@ruzukato02 youtube main channel - Ruzu Kato Ch.
https://youtube.com/channel/UCGSJr_Xo0mDVg7iBwZNNZeQ
Need root with custom rom? Link here: (Soon)

Thanks for the tutorial. I installed this rom in my old xperia c3. All seems fine but the camera is not working. Tried open camera from play store but it's not working as well. Any suggestion on how to make camera work?

shoeseat said:
Thanks for the tutorial. I installed this rom in my old xperia c3. All seems fine but the camera is not working. Tried open camera from play store but it's not working as well. Any suggestion on how to make camera work?
Click to expand...
Click to collapse
same, it's doesn't work because my camera module is not working, try replacing the camera modules, if still. Depending on the variant of the phone.
Btw, thank you for downloading

@ruzukato02dev said:
same, it's doesn't work because my camera module is not working, try replacing the camera modules, if still. Depending on the variant of the phone.
Btw, thank you for downloading
Click to expand...
Click to collapse
How do i replace camera module?

shoeseat said:
How do i replace camera module?
Click to expand...
Click to collapse
like replace the camera hardware part, if you repair youself, you can buy online, or any repair center.

@ruzukato02dev said:
Hello this is @ruzukun02dev, here's how to install tutorial the CyanogenMod 12 Stable ROM on Sony Xperia C3.
Credit to the original owner: @DS1884
Tested model on my device: D2533 / Xperia C3 (AOSP)
Android Ver.: 5.1.1
CyanogenMod version: 12.1-20151128-UNOFFICIAL-wukong
("wukong" codename for device in Sony Xperia C3)
===== Working =====
RIL(Wifi, SIM 1, Data etc.)
GPS
NFC
Camera
All sensors except(see not working)
===== Not Working =====
Accelerometer
Brightness Control
Offline Charging
If your device with different model, why don't your try? Others will testing it with Sony Xperia C3
⚠ WARNING! ⚠
DO AT YOUR OWN RISK
IT IS NOT RESPONSIBLE TO DAMAGE YOUR DEVICE
Link for video tutorial:
===== REQUIREMENTS =====
*Sony Xperia Flash Tool (Important needed)
If don't have it, link here
*Bootloader device ready (Important needed)
If don't have it, it will not work and installation failed. link tutorial for bootloader for Sony Xperia C3 here.
Step by Step text tutorial:
Power off your device (For non-CM users)
1.) Extract all the files, except the GAPPS zip file
2.) Open your Sony Xperia Flash Tool, click fastboot mode
3.) click "select kernel to flash" find the folder 2, then ready select "recovery.img" but don't click it when your not connect to device.
4.) Connect the USB into the computer
*Method 1: Connect your device, Click "Reboot into fastboot mode (via ADB)", then blue light is working, meaning you connected the fastboot mode.
*Method 2: Hold the volume up button, plug the USB cable, then blue light is working, meaning you connected the fastboot mode.
5.) When the device is connected, click "recovery.img" wait until the flash finishes
6.) When finished flashing....
Method 1: Unplug your device, turn on your device, it will automatically boots the TWRP recovery
Method 2: click "Reboot device into system", unplug your device, it will automatically boots the TWRP recovery
7.) On TWRP, tap "wipe", tap "advanced wipe" and wipe all on your device, including system, davik cache, internal storage, etc....
8.) when your done, turn off your device and then
[Same instructions as Step 4] or go to reboot in TWRP, and press "bootloader" to reboots the bootloader mode.
9.) go to fastboot mode again in Sony Xperia Flash Tool, click "select kernel to flash" find the folder 1, then select "boot.img" to flash it. wait until the flash finishes
10.) when finished, click "select system to flash" find the folder 1, then select "system.img" to flash it. wait until the flash finishes
11.) When finished flashing
Method 1: Unplug your device, turn on your device, it will automatically boots the CM 12.1 Stable ROM
Method 2: click "Reboot device into system", unplug your device, it will automatically boots the CM 12.1 Stable ROM
Enjoy!
===== INSTALL GOOGLE APPS =====
Important: Let the boot on your custom rom device. when your finished, turn off your device.
[Do the same as Step 2 to 6 to installing custom rom section]
1.) On TWRP, tap "mount", tap "enable MTP" and will appear the device internal storage on your computer, plug your USB into your computer
2.) Go to folder 3, copy the zip files into the internal storage, when your done copying, unplug it.
3.) Tap install, install the files including "open_gapps-arm-5.1-nano-20170910.zip" wait until finishes.
[Do the same as Step 8 to 11 to installing custom rom section]
Let the boot on your custom rom device to optimize the google apps and services. when your finished, you have sucessfully custom rom with google services!
Enjoy Again!
Download Links:
Mega Link 1: https://mega.nz/file/ODZ1QYqa#Y7oQy25gzlsr7ZL6MOH_Z2mwXY1ucTyeZoGcUnLTsn4
Mega Link 2: https://mega.nz/file/GLQTFQDD#dJ8hSkO3N6_qtqs6rgJpaiTjQyEs1jE_pvuOwNfYpG8
Tips:
For not working screen rotation, Use "Rotation control" App on the Google Play Store. Download it here: https://play.google.com/store/apps/details?id=org.crape.rotationcontrol
For Brightness, Go to settings > Display and Lights > LiveDisplay > Adjust the color calibration RGB together to make it brightness setting lower to higher.
Original posted link:
[STABLE][5.1.1/9]CUSTOM ROM PROJECT FOR XPERIA C3 DUAL
So this phone is basically abandoned, but since I have this phone along with some time(in future), I am working on its resurrection. So, my project was initially based off of Cyanogen Mod 12.1, then with some libs found here and there, I am...
forum.xda-developers.com
Preview Photos:
Phone Xperia C3
View attachment 5187773 View attachment 5187777
Screenshots:
View attachment 5187781View attachment 5187783 View attachment 5187787 View attachment 5187785 View attachment 5187791 View attachment 5187793 View attachment 5187795 View attachment 5187797 View attachment 5187799 View attachment 5187801 View attachment 5187803 View attachment 5187805 View attachment 5187807 View attachment 5187809 View attachment 5187811
Be sure to subscribe to my YT channel
Katsurou Downloads
https://youtube.com/channel/UCyA7PJWqz_z9dzK7-mmGA2w
@ruzukato02 youtube main channel - Ruzu Kato Ch.
https://youtube.com/channel/UCGSJr_Xo0mDVg7iBwZNNZeQ
Need root with custom rom? Link here: (Soon)
Click to expand...
Click to collapse
is this gonna work on c3 dual D2502

(GUIDE:) How to ROOT the TAB S6 - SM-T860 (Wi-Fi Model) - (12/10/21):

Hello all,
BORING INTRO STUFF (Safely Ignore This):
I couldn't find any guide that was current enough to make me feel confident in going through with rooting this tablet. So because of that, I decided I would make on my own guide for those that needed this. I tried multiple guides here and all of them resulted in a boot-loop.
VERY SMALL PSA: I'm apologizing in advance if this guide is both pointless and longer than it needs to be. I figured it would be useful as a future reference in-case anyone needed this.
THINGS YOU WILL NEED:
* TAB S6 - SM-T860 (Wi-Fi)
* This can be done on Android 9,10 & 11 (Process is the same)
* Your specific firmware downloaded (*DO NOT SKIP THIS*)
* Tablet is charged to at least 50%
* Maximum of 20 minutes to both read & follow the process
* FIRMWARE: The link below is the firmware I used. I would still advise you to both look for your specific version and to use the link provided below only if your tablet is exactly as followed:
* (T860XXU4CUI4) - BUILD NUMBER
* (ANDROID 11) - ANDROID VERSION
* (XAR - CELLUAR SOUTH) - SERVICE PROVIDER SOFTWARE VERSION
( https://samfirms.com/SM-T860/KOR/T860XXU4CUI4 )
* SAMSUNG USB DRIVERS: ( https://developer.samsung.com/android-usb-driver )
* ODIN: ( https://samfirms.com/download-odin ) Latest is 3.14.4. Use that one or the newest one
* TWRP (OPTIONAL): T860 (Wi-Fi) ONLY. DOWNLOAD VERSION "twrp-3.6.0_9-0-gts6lwifi.img.tar" OR THE LATEST ONE AVAIABLE.
( https://dl.twrp.me/gts6lwifi/ )
* MAGISK APP: ( https://magiskmanager.com/downloading-magisk-manager )
* LZ4 TOOL: ( https://github.com/lz4/lz4/releases )
* 7-ZIP: ( https://www.7-zip.org/download.html )
HOW TO ROOT:
1. UNLOCKING THE BOOTLOADER: *** THIS WILL WIPE YOUR DATA *** (GO TO SETTINGS > ABOUT TABLET > SOFTWARE INFORMATION & TAP BUILD NUMBER 7 TIMES. GO TO DEVELOPER OPTIONS > TOGGLE ON OEM UNLOCKING) TURN OFF THE TABLET. AT YOUR PC, HAVE A CABLE CONNECTED TO THE PC. WHILE HOLDING BOTH VOLUME DOWN + VOLUME UP, PLUG IN THE CABLE. WHEN THE SCREEN TURNS ON, PRESS AND HOLD VOLUME UP.
WHEN THE SCREEN CHANGES PROMOTING YOU TO UNLOCK THE BOOTLOADER, PRESS VOLUME UP. ONCE BOOTED UP, GO THROUGH THE SETUP AGAIN AND MAKE SURE Wi-Fi IS CONNECTED. GO BACK TO SETTINGS, ENABLE DEVELOPER OPTIONS AGAIN AND THEN ENABLE USB - DEBUGGING.
2. EXTRACT THE BOOT.IMG.LZ4 FILE AND MOVE IT TO YOUR TABLET: After 7-Zip is installed, the LZ4 Tool and the firmware you downloaded is extracted somewhere, open the extracted firmware folder. Right-click on the AP file and select 7-zip then open archive. Look for boot.img.lz4, drag it inside of the LZ4 Tool. Once done, drag the boot.img.lz4 on top of the LZ4 executable. It will be extracted as boot.img. Right-click the boot.img file and select 7-zip then add to archive. Change "Archive format" to tar and rename it to boot.tar. Finally, move it to your tablet's storage.
3. DOWNLOAD THE MAGISK APK: Install the Magisk apk that you downloaded and open it up. Within the app, select install, uncheck recovery mode and press next then check "Select and Patch a file". Locate your boot.tar file that you moved into your storage from earlier and wait for Magisk to process it.
4. USING ODIN: Go ahead and locate the new file, it starts with Magisk (NOT THE BOOT.TAR FROM EARLIER SHOULD START WITH MAGISK). Once done, move the Magisk tar file to your computer and turn off the tablet. With the tablet off and Odin open (Run as administrator) , press and hold both VOLUME DOWN & VOLUME UP then plug the cable from your pc into your tablet. With Odin open, go into the "options" tab, uncheck "Auto Reboot" and Select "AP". Locate the Magisk tar file you moved from your tablet and then press "Start".
ONCE IT SAYS "PASS" THEN STOP AND READ THIS BEFORE CONTINUING. *IMPORTANT*
PRESS AND HOLD BOTH POWER AND VOLUME DOWN FOR 7 SECONDS. THE SCREEN WILL TURN BLACK. VERY QUICKLY WHILE STILL HOLDING POWER, PRESS AND HOLD VOLUME UP INSTEAD. PRESS POWER TO THE BOOTLOADER UNLOCK PROMPT AND YOU SHOULD BE IN RECOVERY. THIS SHOULD BOOT YOU INTO STOCK RECOVERY. USE THE VOLUME KEYS TO NAVIGATE, SELECT "Wipe data/factory reset" then press the power button and select "Factory data reset". Finally, select "Reboot system now" and Wait for the tablet to reboot into the OS.
5. FINISHING UP: After the tablet has restarted back into android and you took a couple of minutes to go through the setup one last time. Scroll up into the app drawer and make sure that you see the app "Magisk", go ahead and select it and press ok to download Magisk. Afterwards, open it up and Magisk will ask you to reboot to finish setting up root. Press ok. Once restarted you are done with the rooting process.
Lastly, as an optional step you can install TWRP.
6. TWRP INSTALLATION (OPTIONAL): With the tablet off and Odin running on your pc, go ahead and press VOLUME DOWN AND VOLUME UP at the same time then plug in the data cable from your PC. Press VOLUME UP to go into download mode. Once in download mode, select "AP" then select the TWRP tar file you downloaded and make sure to uncheck "Auto reboot" from the options tab in Odin. Click start and after it says "PASS" unplug the data cable. On the tablet, press VOLUME DOWN AND POWER to reboot and when you see THE SCREEN TURN BLACK, QUICKLY PRESS AND HOLD BOTH POWER AND VOLUME UP. You should be in TWRP and you are now officially done.
* From now on, I would recommend you use the Magisk app or some reboot app to boot into recovery as it is difficult to use the button combinations to access recovery.
* IF YOU'RE NOT USING MAGISK TO REBOOT TO RECOVERY, I WOULD USE THIS APP INSTEAD: https://play.google.com/store/apps/details?id=com.eypcnnapps.quickreboot&hl=en_US&gl=US
Credits: If all went well then I appreciate you taking the time to read through this guide carefully. Hope it was as clear as possible and that you found it helpful. I will be editing this post from time to time to make it cleaner.
Again, Thank you and if you have any questions, I will answer them when I see them.

THANK YOU SO MUSH IVE BEEN STRUGGLING SO HARD TO GET ROOT ON THIS TABLET FINALLY THANK YOUUUUUU
by the way guys, when it says to reboot to make magisk work.
you are risking a bootloop.

Oh by the way, aside from TWRP being wonky thank you for the guide I had been playing with the idea of rooting this thing for over a year now. You made it easy.
I go through all the steps and it works fine. Once I try for TWRP I end up with
"partition recovery
Reason recovery: Error verifying vbmeta image: invalid vbmeta header (6)
CUSTOM recovery
VBMETA T860XXU4DVG6, 54204454R"
From that point it just loops back to that message and downloading mode until I wipe it all and start over again. I TWRP a no go for the S6 now? I guess I can dig around on their site as well. Any input anyone wants to throw my way will also be appreciated.

Hi Sadistic - ,
I need to start with a complement. This is a really clear guide.
But, When I get done with step 3, the Magisk patched boot file has a .img extension
On step 4, Odin is expecting a .tar file extension so the file doesnt show up.
Did I miss something?
Thanks

mvanwey said:
Hi Sadistic - ,
I need to start with a complement. This is a really clear guide.
But, When I get done with step 3, the Magisk patched boot file has a .img extension
On step 4, Odin is expecting a .tar file extension so the file doesnt show up.
Did I miss something?
Thanks
Click to expand...
Click to collapse
Yep..... try step 2

seppukuudere said:
Yep..... try step 2
Click to expand...
Click to collapse
Yes, step 2 is moving the extracted boot file (re-named to .tar) to my tablet and then patching it with magisk.
The patched file from Magisk has an .img extension.

mvanwey said:
Yes, step 2 is moving the extracted boot file (re-named to .tar) to my tablet and then patching it with magisk.
The patched file from Magisk has an .img extension.
Click to expand...
Click to collapse
Ah I see, I would try to do step 3 again, take screenshots of the end result from magisk o:

Let's just cancell this. it was over 20 days since I asked for help & now I'm getting asked for screenshots.
I have moved on.
I probably should have put that in my reply.

mvanwey said:
Let's just cancell this. it was over 20 days since I asked for help & now I'm getting asked for screenshots.
I have moved on.
I probably should have put that in my reply.
Click to expand...
Click to collapse
oops yikes, yeah probably should have. happy new year!

seems like after rooting mine the storage has been cut by a big margin, from 128 to 32gb. any way of fixing this?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Hi. Is there any update guide for last android 12 version, to install twrp? Can se still use this, as it is for android 11?
Thanks,

Database Info

welcome