Database Info

TWRP Recovery's and Root for Redmi Pro | All Versions

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP Collection for Redmi Pro
DISCLAIMER
Code:
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you
GUIDE FOR TWRP install & ROOT
Xiaomi Redmi Pro {ALL VERSIONS} TWRP download and Redmi Pro root
This guide will help you install TWRP and root Redmi Pro, the first step is to install TWRP custom recovery on the Redmi Pro. The process contains quite a few steps, but most of them take just a few seconds.
If it looks daunting, don’t worry, take each step one by one and you’ll come through with TWRP and a rooted Redmi Pro within just a few minutes.
Prerequisites and note
You must have an unlocked bootloader to follow this guide; flashing through fastboot requires an unlocked bootloader. If your Redmi Pro bootloader isn’t unlocked yet, go to the official Xiaomi unlock page to begin the process.
You need to backup anything you don’t want lost to your PC or a TF SD card; for TWRP to work, you may need to factory reset. You will lose all user data. Backup all important data BEFORE you flash the TWRP.{only if you choose twrp 3.0.20}
1. WHATS INCLUDED
PASSWORD IS"kristi6.9"
a.Auto installer for adb commands, adb drivers and fastboot commands– These are the tools that will allow your PC to communicate with your mobile.
View attachment adb-setup-1.4.2.zip
b.Redmi Pro TWRP custom recovery used for rooting and flashing custom ROMs onto Redmi Pro.-links below
c.Redmi Pro root SuperSU.zip– The SuperSU.zip used for rooting Redmi Pro through TWRP recovery(extract it to get supersu binary +supersuapk+supersu premium)link below
2. Install the adb drivers and fastboot commands
Extract the above download.
Run “adb-setup.exe”.
Hit “Y” to all 3 questions.
The Google adb driver installer will then popup. Go ahead and allow and install.
3. Prepare your Xiaomi Redmi Pro
Settings >> About phone >> Tap “MIUI Version” seven times.
Hit the back button. You should then be at the main settings menu.
Go to “Additional settings” >> “Developer options” >> “USB Debugging”.
A warning will pop up. Go ahead and allow.
Plug your phone to PC via USB cable.
You should then see a pop up request on your Redmi Pro to give your PC USB debugging permissions. Go ahead and allow.
4. Copy the TWRP and open the command window
Open Windows Explorer and go to “c:/adb”.
Copy “twrp.img” to “c:/adb”.
IN A BLANK SPACE (not on a filename etc…), hold SHIFT while RIGHT-CLICK
Select “Open command window here”. You should then see a small black window open.
5. Boot into bootloader and fastboot flash the TWRP
In the black command window type “adb reboot bootloader”. Hit Enter. Wait about 10 seconds and you should then see your Redmi Pro says “Fastboot” along with the Xiaomi Mascot.
In the black command window type “fastboot flash recovery twrp.img”. Hit Enter.
You should then see that the file has flashed successfully (OKAY). It all takes just a second. (see pic and video)
6. Boot into TWRP
In the black command window, type “fastboot reboot”. Do not hit Enter yet.
Hold Volume Up on the Xiaomi Redmi Pro while hitting Enter on your PC.
Continue holding Volume Up for about 30 seconds until you see TWRP has booted.
BAM! You’re now booted into TWRP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Method 2: If you have twrp already installed
1.Put twrp.img in the phone storage
2.Boot on twrp recovery
3. Press install
4.Then install image
5.Check twrp.img in your phone storage
6.And slide to install it.
TWRP 3.0.2-0
Download this zip and extract it
View attachment twrp.3.0.2.0.zip
or download from here
Link here
BUGS
Code:
FIRST RUN CAN SHOW {error mounting}-can be fixed by formatting data
TWRP 3.0.2-2
Download this zip and extract it
View attachment twrp.3.0.2.2.zip
or Download Mega apk from play store
Link on Mega
BUGS
Code:
1.DOESN'T SUPPORT 4GB/128GB VERSION
2.CAN'T SEND FILES WITH MTP
TWRP 3.0.3-0
Download this zip and extract it
View attachment twrp.3.0.3.0.zip
or download
Link here
BUGS
Code:
Yuo tell me
TWRP 3.0.2-0 by @end222
Note: It is ported from Vernee Apollo Lite by @end222-[thanks for everything].
To download go HERE
TWRP 3.1.0 by @end222
Note: THIS IS THE MOST RECOMMENDED version.
To download go https://xiaomi.eu/community/threads/twrp-3-1-0-by-end222.39179/
ATTENTION AFTER INSTALLING TWRP YOU SHOULD INSTALL SUPERSU OR FLASH A CUSTOM ROM ( xiaomi.eu for example)
Root your Xiaomi Redmi Pro
Now that your TWRP is functioning, you can easily root your Xiaomi Redmi Pro.
Download this View attachment SuperSu.zip
Connect Redmi Pro to your PC.
TWRP main menu >> Mount >> Mount USB storage. The Redmi Pro should then show up in Windows File Explorer under This PC / My Computer.
Copy the SuperSU.zip to the root of your Redmi Pro. and extract it.
Now you have supersu apks +supersu2.79.zip (that should be flashed)
TWRP main menu >> Install
Assuming you have the Supersu.2.79.zip. in the base of the internal storage, you should see it at /sdcard. If it’s in another directory, then navigate to whichever directory you extracted the Supersu.2.79.zip to.
Select the Supersu2.79.zip
Swipe to confirm the flash
Credits:
@kristi6.9 #Me for posting ---HIT THANKS
#hanuma50 for twrp 3.0.3.0
Xda Developers #for the forum
BrianAbad #for posting twrp 3.0.2.2 on Miui Forums
@daohoa #for it's first twrp build​

Upgrade from TWRP => INSTALL > INSTALL IMAGE >>> check Recovery
any bug fixes ?

The bug fixes:
criszz said:
Upgrade from TWRP => INSTALL > INSTALL IMAGE >>> check Recovery
any bug fixes ?
Click to expand...
Click to collapse
-No more need to format data
-It starts directly in english language

this twrp does not suits for 4/128 version.
on 128g, twrp can not recognize data and storage partitions so it can not make a full wipe to these partitions. So after installing xiaomi.eu rom from any official rom, a lot of programs crashes and gives error. no possiblity to use phone.

thanks for information
sokomind said:
this twrp does not suits for 4/128 version.
on 128g, twrp can not recognize data and storage partitions so it can not make a full wipe to these partitions. So after installing xiaomi.eu rom from any official rom, a lot of programs crashes and gives error. no possiblity to use phone.
Click to expand...
Click to collapse
I use a 3/32gb version and didnt know this problem..I will re-edit post

just noticed i cannot copy twrp bakup, created with this version, from internal to pc with mtp(phone on)
working if backup is on sd-card but not on internal
working when use mtp from twrp
i switced back to first twrp.

criszz said:
just noticed i cannot copy twrp bakup, created with this version, from internal to pc with mtp(phone on)
working if backup is on sd-card but not on internal
working when use mtp from twrp
i switced back to first twrp.
Click to expand...
Click to collapse
I'm sorry but I dont own this project Im just posting it .

not a problem mate, just for people to know

Can we flash incremental OTA update with this TWRP? Also do we need to flash any additional zip file while flashing OTA update?

criszz said:
not a problem mate, just for people to know
Click to expand...
Click to collapse
ok?? thanks for sharing

sakibshahriyar98 said:
Can we flash incremental OTA update with this TWRP? Also do we need to flash any additional zip file while flashing OTA update?
Click to expand...
Click to collapse
? I dont know if we can flash OTAs but I believe not.......if you want you can test it and reply me...?

twrp 3.0.3.0 is out but i don't have account ( i have account but i cannot read capcha, i'm not russian) to download >>> https://translate.googleusercontent...JrhiSRckpRu0LTM8MC6hL3AaPTVYapA#entry57345595

criszz said:
twrp 3.0.3.0 is out but i don't have account ( i have account but i cannot read capcha, i'm not russian) to download >>> https://translate.googleusercontent...JrhiSRckpRu0LTM8MC6hL3AaPTVYapA#entry57345595
Click to expand...
Click to collapse
You can download twrp 3030 from 4pda below
I have not tested it, just sharing.
http://www.filedropper.com/twrpomega3030

kremmit said:
You can download twrp 3030 from 4pda below
I have not tested it, just sharing.
http://www.filedropper.com/twrpomega3030
Click to expand...
Click to collapse
any changelog from previous build??

kristi6.9 said:
any changelog from previous build??
Click to expand...
Click to collapse
Can't find the changelog for the new version.
But it seems to be green in color.

kremmit said:
Can't find the changelog for the new version.
But it seems to be green in color.
Click to expand...
Click to collapse
ok...thanks however?

Error mounting memory via recovery. Thanks for corrected

fays91 said:
Error mounting memory via recovery. Thanks for corrected
Click to expand...
Click to collapse
what version.....
try formating data....

I use your rom version and install
But if I go into recovery and I upgrade the memory can not copied files on

fays91 said:
I use your rom version and install
But if I go into recovery and I upgrade the memory can not copied files on
Click to expand...
Click to collapse
i didnt understood u...
can you tell me the twrp version 3.0.2.0~3.0.2.2~3.0.3.0
......and describe your problem better

Sony Xperia XZ Unlock bootloader, TWRP and ROOT.

For rooting Xperia XZ, we need recovery and for recovery flashing the bootloader must be unlocked.
PREREQUISITES:
1. ADB/FASTBOOT. View attachment 4715074
2. Drivers for Sony Xperia XZ. View attachment Xperia_XZ_driver.zip
3. Backup all your data, Apps, Contacts & everything you need.
4. Charge ur device above 60% to avoid any shutdown during the process
UNLOCKING BOOTLOADER
Unlock Bootloader: Opens the door to System files of your device. This allows you to flash images onto the main system partitions of the phone, after unlocking you will lose the DRM keys and phone's warranty will be void, it will also factory reset your device.(backup is recommended)
1. Open Dialer.
2. Dial *#*#7378423#*#*
3. Press service info than configuration.
4. Check if “Bootloader Unlock” is yes under Rooting status.[If not then your device can not be unlocked]
5. Check what android you are running on. Go to Settings -> About Phone -> Android Version. If you have 6.x.x then goto step 9 but if you have 7.x.x then you have to downgrade to Marshmallow.
6. Download and install FlashTool from its official website.
7. Install the drivers for fastmode and for your device in the driver folder of the FlashTool. [C:>FLASHTOOL>drivers]
8. Download ftf for your device using XpiriFirm and flash it using flashtool.
How to flash ftf?
9. Goto settings>about phone >developers option and ensure that OEM Unlock and USB Debugging is on.
10. Goto Xperia BLU page and Choose Xperia XZ at the bottom of the page.
11. Enter your Email and you will receive a link in your mail. Follow the steps given by Sony.
12. BE CAREFUL and, from now on, DON’T ENABLE the MyXperia. It could hard brick your phone.
Now your phone is unlocked
We will now go over some other fixes.
FLASH ANDRO PLUS KERNEL.
This kernel will help your device cope up with some battery issues and it also has some DRM Fixes. To install it, follow the steps :
1. Download the kernel version supported for your buildnumber.{AndroPlus}
2. Unzip the downloaded file and paste them into your fastboot/adb directory.
3. Now Boot into Bootloader mode by turning the device off and pressing volume up then plug in the USB.
4. Run the command prompt where you pasted the extracted zip . Do this by shift+right click and selecting Open command prompt here.
5. Enter the command "fastboot flash boot boot.img"(without double quotation)
6. Unplug and reboot your device
FLASH CUSTOM RECOVERY [TWRP]
A custom recovery is flashed onto the recovery partition of the device and overwrites the stock recovery that exists by default(XZ doesn't have stock recovery). Custom recoveries bring lots of functionality and allows you to perform wipes, install flashable zips, create full backups of your NAND (Nandroid backup), and various other features. An unlocked bootloader is needed to install a custom recovery.
This process will provide your device a custom recovery (TWRP) This can be used to flash root script, ROM and custom kernels at anytime without PC.
1. Download the TWRP image file.
2. Paste it in your Fastboot directory and rename it as recovery.img
3. Open cmd in the folder where you pasted recovery.img
4. Enter the command "fastboot flash recovery recovery.img"(without double quotation)
5. Reboot your device.
FLASHING MAGISK
Now the final step. To root your device you just need to flash the Magisk zip.
1. Download the zip.
2. Paste it in your device.
3. Now boot into recovery by turning off and press power+volume down at the same time and release the power key after vibration.
4. If TWRP is decrypted use this guide.
5. Now select install and navigate to the pasted zip, swipe for flash.
6. Reboot and check if the Magisk app is installed on your device.
________________________________________________________________________________________
-- If You Liked My Work--
-- Press the Thanks :good: Button --
​

Hi there.
May downgrade from N 7.1.1 to MM 6.0.1 causing lost DRM key ?
Thanks for your reply.

anhyeuviolet said:
Hi there.
May downgrade from N 7.1.1 to MM 6.0.1 causing lost DRM key ?
Thanks for your reply.
Click to expand...
Click to collapse
No downgrading not.
Drm keys r lost when u unlock bootloader

Have someone tried this guide????

awadnisar said:
No downgrading not.
Drm keys r lost when u unlock bootloader
Click to expand...
Click to collapse
This is my Screenshot from Security (inside Service test).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Do you have any idea ?
My XZ looks different to another pics from Internet.

anhyeuviolet said:
This is my Screenshot from Security (inside Service test).
My XZ looks different to another pics from Internet.
Click to expand...
Click to collapse
It should ...
Looks normal for a new device.
Check
Service Info -> Configuration -> Bootloader unlock allowed

DHGE said:
It should ...
Looks normal for a new device.
Check
Service Info -> Configuration -> Bootloader unlock allowed
Click to expand...
Click to collapse
Checked and it show:
Bootloader unlock allowed: Yes.
Is it ok ?

anhyeuviolet said:
Is it ok ?
Click to expand...
Click to collapse
For me: yes
For the larger part of Society? Hmmm :silly:
read my [Guide]

DHGE said:
For me: yes
For the larger part of Society? Hmmm :silly:
read my [Guide]
Click to expand...
Click to collapse
Mailed to Sony Support. They said that Okay, too.
If XZ is not lagging as it right now, I will be more satisfied.

Quick Info After Unlocking Bootloader
awadnisar said:
For rooting Xperia xz (DUAL), we need recovery and for recovery flashing the bootloader must be unlocked.
CONTINUE AT YOUR OWN RISK
PREREQUISITES
1. ADB/FASTBOOT. Download https://drive.google.com/open?id=0B4IlcVrKbV2qT1V1T2RFQmxXNU0
2. Drivers for Sony Xperia XZ. Download https://drive.google.com/open?id=0B4IlcVrKbV2qeloxN01ESkZZTkU
3. Backup all your data, Apps, contacts & everything your need. we need to create backup in order to restore if anything goes wrong. [hopefully not]
4. Charge ur device above 60% to avoid any shutdown during the process
UNLOCKING BOOTLOADER
Unlock Bootloader: Opens the door to System files of your device. This allows you to flash images onto the main system partitions of the phone, after unlocking you will lose the DRM keys and phone's warranty will be void, it will also factory reset your device.(backup is recommended)
1. Open your dialer.
2. Dial *#*#7378423#*#*
3. Press service info than configuration.
4. Check if “Bootloader Unlock” is yes under Rooting status.[If not then your device can not be unlocked]
5. Check what android you are running on. Go to Settings -> About Phone -> Android Version. If you have 6.x.x then goto step 9 but if you have 7.x.x then you have to downgrade to Marshmallow.
6. Download and install FlashTool from its official website. http://www.flashtool.net/downloads.php
7. Install the drivers for fastmode and for your device in the driver folder of the FlashTool. [C:>FLASHTOOL>drivers]
8. Download ftf for your device, for [F8332/dual (https://drive.google.com/open?id=0B4IlcVrKbV2qSnBCRWxHLWY5RjQ)] and flash it using flashtool.
how to flash ftf https://forum.xda-developers.com/xperia-z/general/tutorial-how-to-flash-stock-roms-t2240614
9. Goto settings>about phone >developers option and ensure that OEM Unlock and USB Debugging is on.
10. Goto (https://developer.sonymobile.com/unlockbootloader/unlock-yourboot-loader/) and Choose Xperia XZ at the bottom of the page.
11. Enter your Email and you will receive a link in your mail. Follow the steps given by Sony.
12. BE CAREFUL and, from now on, DON’T ENABLE the MyXperia. It could hard brick your phone.
Now your phone is unlocked
We will now go over some other fixes.
FLASH ANDRO PLUS KERNEL.
This kernel will help your device cope up with some battery issues and it also has some DRM Fixes. To install it, follow the steps :
1. Download the kernel https://github.com/AndroPlus-org/android_kernel_sony_msm8996
2. Unzip the downloaded file and paste them into your fastboot/adb directory.
3. Now Boot into Bootloader mode by turning the device off and pressing volume up then plug in the USB.
4. Run the command prompt where you pasted the extracted zip . Do this by shift+right click and selecting Open command prompt here.
5. Enter the command "fastboot flash boot boot.img"(without double quotation)
6. Unplug and reboot your device
FLASH CUSTOM RECOVERY [TWRP]
A custom recovery is flashed onto the recovery partition of the device and overwrites the stock recovery that exists by default(XZ doesn't have stock recovery). Custom recoveries bring lots of functionality and allows you to perform wipes, install flashable zips, create full backups of your NAND (Nandroid backup), and various other features. An unlocked bootloader is needed to install a custom recovery.
This process will provide your device a custom recovery (TWRP) This can be used to flash root script, ROM and custom kernels at anytime without PC.
1. Download the TWRP image file https://drive.google.com/open?id=0B4IlcVrKbV2qWF9QaDhPd2hONmc
2. Paste it in your Fastboot directory and rename it as recovery.img
3. Open cmd in the folder where you pasted recovery.img
4. Enter the command "fastboot flash recovery recovery.img"(without double quotation)
5. Reboot your device.
FLASH SUPER SU ZIP
Now the final step. To root your device you just need to flash the super su zip.
1. Download the zip. https://drive.google.com/open?id=0B4IlcVrKbV2qOExRekY3M3ZPVG8
2. Paste it in your device.
3. Now boot into recovery by turning off and press power+volume down at the same time and release the power key after vibration.
4. Now select install and navigate to the pasted zip, swipe for flash.
5. Reboot and check if the Super SU app is installed on your device.
Click to expand...
Click to collapse
Good Tutorial As Iam Quite Familiar With This Rooting Method I Would Like To Highlight a Line
2. Paste it in your Fastboot directory and rename it as recovery.img
Because it Is Necessary Guys Without Renaming It , It Would Be Difficult to Enter in TWRP Recovery.
Rename To "recovery.img" is Must to Replace The Stock With This One.
and To Enter TWRP MENU After Everything Done.-----> Follow The Steps. <------
1 - Completely Power OFF The Phone , ( You Can Also Power off the Phone Anytime By Holding VOLUME UP + POWER BUTTON For 5 Secs Until There is 3 Vibration. )
2 - Hold Volume Down + Power Button , After That SONY Logo is Shown , Then Release ONLY THE POWER KEY and KEEP HOLDING the VOLUME DOWN Button.
3 - Wait Till TWRP Appears and Start Doing What You Like.
I Hope This Info Helps To Beginners.

CALL ME SUBH said:
Good Tutorial As Iam Quite Familiar With This Rooting Method I Would Like To Highlight a Line
2. Paste it in your Fastboot directory and rename it as recovery.img
Because it Is Necessary Guys Without Renaming It , It Would Be Difficult to Enter in TWRP Recovery.
Rename To "recovery.img" is Must to Replace The Stock With This One.
and To Enter TWRP MENU After Everything Done.-----> Follow The Steps. <------
1 - Completely Power OFF The Phone , ( You Can Also Power off the Phone Anytime By Holding VOLUME UP + POWER BUTTON For 5 Secs Until There is 3 Vibration. )
2 - Hold Volume Down + Power Button , After That SONY Logo is Shown , Then Release ONLY THE POWER KEY and KEEP HOLDING the VOLUME DOWN Button.
3 - Wait Till TWRP Appears and Start Doing What You Like.
I Hope This Info Helps To Beginners.
Click to expand...
Click to collapse
Thanks, when i was writing the post i took too long so i can't explain each and every step.

awadnisar said:
Thanks, when i was writing the post i took too long so i can't explain each and every step.
Click to expand...
Click to collapse
No Prob Bro

Do I still need to downgrade to MM when I'm running latest version of Oreo?

odarpsahc said:
Do I still need to downgrade to MM when I'm running latest version of Oreo?
Click to expand...
Click to collapse
If you want Unlock bootloader, as I know, Yes.

magisk/super su
hi, how to install magisk instead of super su in marshmallow, thanks

ciqbalz said:
hi, how to install magisk instead of super su in marshmallow, thanks
Click to expand...
Click to collapse
Just install latest magisk zip

odarpsahc said:
Do I still need to downgrade to MM when I'm running latest version of Oreo?
Click to expand...
Click to collapse
Yes coz for unlocking bootloader it's necessary

awadnisar said:
Yes coz for unlocking bootloader it's necessary
Click to expand...
Click to collapse
Hmm.. Not really, if he wishes to save and back up his DRM keys then yes it is nessecary to downgrade but if he's not worried about them he can do everything from oreo, unlocking the BL, installing a Kernel, TWRP ect.... But let me be clear to save your DRM Keys you need to downgrade..

[RECOVERY] TWRP 3.2.1 For C701F/DS [STABLE]

Team Win Recovery Project
It's Compatibe with Snapdragon Variants Of C7 Pro Such as C701F and C701F/DD.
If it's not working with your device or you have different model let me know. I would Build a Different Version of Recovery for your Model.
#include <std_disclaimer.h>
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Special Notes:
1. READ THE GUIDE.
2. KNOX will be tripped once you flashed custom binaries to your phone.
(Your warranty may be voided. However, this may not affect you if your country, European Union, for example, forces Samsung to provide hardware warranty regardless of software status.)
More Infos: https://en.m.wikipedia.org/wiki/Rooting_the_Android_operating_system
3. Samsung Firmware OTA (aka System Updates) will no longer work once you flashed custom binaries.
(You can flash custom ROMs if you want to keep the OS up-to-date.)
4. It is HIGHLY UNRECOMMENDED to purchase any access to any kind of private forums, ROMs or Kernels.
(DO NOT GET FOOLED.)
5. You HAVE to use newer version of Odin (>3.13) if you want to flash stock ROMs.
Download:
Galaxy C7 Pro (C701F/DS):
https://androidfilehost.com/?w=files&flid=275664
Sources:
https://github.com/TeamWin
https://github.com/aapav01/android_device_samsung_c7proltedd-twrp
Changelog:
Check #2.
Guide:
Check #3.
Show your appreciation:
Click Thanks!, Rate 5-star or/and Donate to me.
(You Can donate me Steam Gift Cards)
To contribute:
TWRP Code Review
Github pull requests will be ignored.

Change log:
Note that this page only includes device-specific changes. For global TWRP changes, go to twrp.me.
June 12, 2018 (twrp-3.2.1-0):
Fixed MTP
Fixed encryption on ASOP ROM (Samsung is unsupported)
Enable NTFS Support
Fixed Mount Issues of partition
Add Support OREO ROMs
Added EFS Backup
And MORE

Guides:
Notice: It may wipe all your data including those in internal storage.
Part 1 - HOW-TO FLASH TWRP:
1. In your ROM, go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
2. Go to Settings -> Developer options and enable OEM Unlock option.
3. Download and Install Samsung Mobile Phones Drivers.
- Option 1: Download and Install Smart Switch for PC.
- Option 2: Download and Install standalone driver package.
4. Download and extract Odin (Samsung's Flash Tool) to your computer.
5. Download a .tar image of TWRP.
6. Reboot your device to download mode.
- Hold [VOLUME DOWN] + [HOME BUTTON] + [POWER] for approx. 15 seconds.
- Read the warning carefully.
- If you agree, press [VOLUME UP] to get into Download mode. If you don't agree, STOP.
7. Open Odin and place that TWRP tar file in the [AP] slot.
8. Connect your phone.
9. Hold [VOLUME UP] + [HOME BUTTON] + [POWER] on your phone and then press start on Odin.
10. Wait for the phone to reboot. DO NOT release [VOLUME UP] + [HOME BUTTON] + [POWER] or you may not reboot into TWRP.
Part 2 - HOW-TO INITIALIZE TWRP: (for new phones)
1. If you completed Part 1 successfully, you should be in TWRP now. At this point, you will reach the screen asking you if you want to allow system modifications.
2. Select "Keep /system RO". (Don't swipe right or you may not be able to boot into system if you failed to complete next steps. However, you can swipe right to allow modifications if you are confident that you can complete next steps.)
3. Go to "Wipe" menu of TWRP and you will find "Format Data". Press "Format Data" and type "yes" to continue.
4. Go to "Reboot" menu and Press "Recovery" to reboot TWRP.
5. Download the latest dm-verity and force encryption disabler zip on your computer.
6. Transfer the zip to your phone.
- Option 1: MTP: Connect your phone with computer and just copy the zip to internal storage. (similar to how you transfer files when in system.)
- Option 2: ADB: Connect your phone with computer and run command "adb push /path/to/zip /sdcard/".
- Option 3: External SD: Copy the zip to an external SD and then insert the card to your phone.
7. Go to "Install" menu of TWRP and flash the zip.
TWRP is initialized and fully functional at this stage. Now you can either reboot into system or root, flash custom ROMs via TWRP.
Part 3 - HOW-TO ROOT:
1. Download the flashable zip.
- Option 1: Magisk
- Option 2: SuperSU
2. Transfer the zip to your phone.
3. Go to "Install" menu of TWRP and flash the zip.
Part 3a - HOW-TO FLASH CUSTOM ROMS:
1. Download the flashable zip.
2. Transfer the zip to your phone.
3. Go to "Install" menu of TWRP and flash the zip.
Simple.

dear.......followed procedure....but... ( error is set warranty bit kernel..)...now any soln...pl reply..
thanxs with deep warm regards

I have the SM-C7018 version of this phone and, by following your guide, I was able to set up TWRP on Android 7.0 and flash GAPPS.
Thank you very much for this!
EDIT: Maybe it was just in my case, but for those of you that wish to install GAPPS on this device, keep in mind that you must not reset it to the factory conditions after installing GAPPS, as the Play services will FC once the phone boots up, and you will not be able to use it anymore. I had to re-flash the firmware. Also, I've used the Pico package, ARM x64, Android 7.0.
EDIT 2: Unfortunately, I couldn't manage to get the GApps working. The Google Framework Services would always crash when opening any google application for the first time or when trying to add the account from the Settings Menu. Anyone had any success with adding GApps on the Nougat firmware?

SPG30759 said:
dear.......followed procedure....but... ( error is set warranty bit kernel..)...now any soln...pl reply..
thanxs with deep warm regards
Click to expand...
Click to collapse
it's normal on samsung devices

aapav01 said:
it's normal on samsung devices
Click to expand...
Click to collapse
Hi, I did the steps you mentioned, but after completion I checked with Root Checker app it says "Root not installed properly". Do you know why?

My device is C7010. Can it use your TWRP as well?

c7 PRO c7018
Will this tprw work with c7018 model? and with c7018 + oreo?
aapav01 said:
Team Win Recovery Project
It's Compatibe with Snapdragon Variants Of C7 Pro Such as C701F and C701F/DD.
If it's not working with your device or you have different model let me know. I would Build a Different Version of Recovery for your Model.
#include <std_disclaimer.h>
Special Notes:
1. READ THE GUIDE.
2. KNOX will be tripped once you flashed custom binaries to your phone.
(Your warranty may be voided. However, this may not affect you if your country, European Union, for example, forces Samsung to provide hardware warranty regardless of software status.)
More Infos: https://en.m.wikipedia.org/wiki/Rooting_the_Android_operating_system
3. Samsung Firmware OTA (aka System Updates) will no longer work once you flashed custom binaries.
(You can flash custom ROMs if you want to keep the OS up-to-date.)
4. It is HIGHLY UNRECOMMENDED to purchase any access to any kind of private forums, ROMs or Kernels.
(DO NOT GET FOOLED.)
5. You HAVE to use newer version of Odin (>3.13) if you want to flash stock ROMs.
Download:
Galaxy C7 Pro (C701F/DS):
https://androidfilehost.com/?w=files&flid=275664
Sources:
https://github.com/TeamWin
https://github.com/aapav01/android_device_samsung_c7proltedd-twrp
Changelog:
Check #2.
Guide:
Check #3.
Show your appreciation:
Click Thanks!, Rate 5-star or/and Donate to me.
(You Can donate me Steam Gift Cards)
To contribute:
TWRP Code Review
Github pull requests will be ignored.
Click to expand...
Click to collapse

Can I use this to port TWRP for 10.or G
Specs of 10.or G
Snap 626
4gb ram
Also pls reply what hardware needs to be same for porting.
And does kernel matter in Porting these images???
Thanx in advance

@aapav01 plz make twrp for C7000 oreo
tnks

a7 2015
Can build for me this same rom its humble request

Thank you!

c7 pro twrp for oreo
hi
i have series gapps problem .
can you plz make one for c7 pro sm-c7018 oreo .
twrp has no version for it .
baseband version: c7018zmu2cri1
buildnumber: r16nw.c7018zmu2cri1.
2018/09/14
ty

phone stucked at samsung logo and set bit : kernal
I followed same step and my phone isnt booting now
stucked at samsung logo and yellow top right says set bit: kernal
please help

try this
ashokrathi said:
I followed same step and my phone isnt booting now
stucked at samsung logo and yellow top right says set bit: kernal
please help
Click to expand...
Click to collapse
try pressing vol down and power at same time time then phone goes to power off then switch from vol down to vol up holding the power button now as soon as screen display starts leave both buttons it will now boot into twrp recovery go to wipe format data and type yes then flash no dm verity and magisk as per instruction given

My device is C7010. Can it use your TWRP as well?

aapav01 said:
Guides:
Notice: It may wipe all your data including those in internal storage.
Part 1 - HOW-TO FLASH TWRP:
1. In your ROM, go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
2. Go to Settings -> Developer options and enable OEM Unlock option.
3. Download and Install Samsung Mobile Phones Drivers.
- Option 1: Download and Install Smart Switch for PC.
- Option 2: Download and Install standalone driver package.
4. Download and extract Odin (Samsung's Flash Tool) to your computer.
5. Download a .tar image of TWRP.
6. Reboot your device to download mode.
- Hold [VOLUME DOWN] + [HOME BUTTON] + [POWER] for approx. 15 seconds.
- Read the warning carefully.
- If you agree, press [VOLUME UP] to get into Download mode. If you don't agree, STOP.
7. Open Odin and place that TWRP tar file in the [AP] slot.
8. Connect your phone.
9. Hold [VOLUME UP] + [HOME BUTTON] + [POWER] on your phone and then press start on Odin.
10. Wait for the phone to reboot. DO NOT release [VOLUME UP] + [HOME BUTTON] + [POWER] or you may not reboot into TWRP.
Part 2 - HOW-TO INITIALIZE TWRP: (for new phones)
1. If you completed Part 1 successfully, you should be in TWRP now. At this point, you will reach the screen asking you if you want to allow system modifications.
2. Select "Keep /system RO". (Don't swipe right or you may not be able to boot into system if you failed to complete next steps. However, you can swipe right to allow modifications if you are confident that you can complete next steps.)
3. Go to "Wipe" menu of TWRP and you will find "Format Data". Press "Format Data" and type "yes" to continue.
4. Go to "Reboot" menu and Press "Recovery" to reboot TWRP.
5. Download the latest dm-verity and force encryption disabler zip on your computer.
6. Transfer the zip to your phone.
- Option 1: MTP: Connect your phone with computer and just copy the zip to internal storage. (similar to how you transfer files when in system.)
- Option 2: ADB: Connect your phone with computer and run command "adb push /path/to/zip /sdcard/".
- Option 3: External SD: Copy the zip to an external SD and then insert the card to your phone.
7. Go to "Install" menu of TWRP and flash the zip.
TWRP is initialized and fully functional at this stage. Now you can either reboot into system or root, flash custom ROMs via TWRP.
Part 3 - HOW-TO ROOT:
1. Download the flashable zip.
- Option 1: Magisk
- Option 2: SuperSU
2. Transfer the zip to your phone.
3. Go to "Install" menu of TWRP and flash the zip.
Part 3a - HOW-TO FLASH CUSTOM ROMS:
1. Download the flashable zip.
2. Transfer the zip to your phone.
3. Go to "Install" menu of TWRP and flash the zip.
Simple.
Click to expand...
Click to collapse
I want to try this but my phone (c701f-ds) never boots into download mode or recovery mode consistently. I bricked the phone trying to root it throught the magisk app, using this very version of twrp. I got it back. I was able to flash the original stock oreo rom using odin
But to get the phone back I didn't go through the (blue screen) Download Mode, Instaed I got into the recovery envoronment (very hit and miss) then chose to reboot into bootloader mode, where I saw it yellow at the top of the screen "download mode" but not the blue screen of the usual download mode.
In this bootloader/download mode environment I connected the phone to the laptop. Odin recognised the phone and I loaded the stock rom into AP, and the appropriate files into the other boxes (I used Home_CSC instead of CSS, essentila for getting VOLTE to work). It flashed successfully. (a status bar appeared on the phone which corresponded to the download process)
But that wasn't the method that anyone else recommended.
I would try flashing the twrp tar file in the same way but there is no guarentee I could get into the twrp environment since holding [VOLUME UP] + [HOME BUTTON] + [POWER] doesn't always, or even often, get me into recovery mode.
I can use adb to reboot into recovery and from there get into bootloader/download mode but not again if the os doesnt load
Any advice?
And you say that eventhough the phone is already in download mode, that after you connect the phone to the pc where odin is loaded and has initialized the tar file, you have to press and hold [VOLUME UP] + [HOME BUTTON] + [POWER] and then press start on Odin. Then continue to hold these 3 buttons till the phone reboots into twrp. Why not just press start on odin without holding these 3 buttons? If the phone just shuts off after flashing twrp, would turning it on by holding those 3 buttons bring the phone (except mine perhaps) into twrp recovery?
What happens if the phone doesn't boot into recovery/twrp? Is it bricked? And if it does boot into the os, could you use adb to get into twrp?
I am being cautious due to the difficulty in getting the phone back after bricking it last time and because there is no guarentee that an ke combos will definitely get my phone into recovery or download mode.
Help is appreciated.

CUBOT X19 [ TWRP 3.3.1 + Root ]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP 3.3.1 + Root
This topic is the result of work mehanik6 (4PDA) my greetings to him
Tested on Android 9
1 - Remember that everything you do, you do at your own risk
2 - to install TWRP, we will have to unlock the bootloader, all data will be erased, Your device becomes out of warranty
3 - the you need to be installed adb driver For connecting your device to a computer (15 Second ADB Installer v1.5.3.zip)
How to install Best Android ADB Driver on your computer
How to Install Google USB Driver for Windows | ADB and FastBoot
installation
- download the archive delete_verity_key.zip without unpacking put on the sdcard (Attached file) delete_verity_key.zip (130.56 KB)
- download file Fix_vendor.zip without unpacking on the sdcard (Attached file) Fix_vendor.zip (347.64 KB)
- download file Magisk-v20.1.zip without unpacking on the sdcard (Attached file) Magisk-v20.1.zip (5.22 MB)
- download file adb.zip. unzip to your computer desktop adb.zip (22.02 MB)
- Enable developer options in Android
GO to Settings > Swipe down and tap on About Phone Keep tapping on the build number for 7 times
-Enable the USB debugging option
GO to Settings >System -> Developer options on your Android device and enable the USB debugging option.
-Enable “OEM Unlocking”
GO to Settings > Developer options on your Android device and enable the OEM Unlocking option.
when you plug the device into an PC, it will prompt you to allow USB debugging (as seen in the screenshot below).
- allow unlocking of the bootloader
- Decompress a folder adb.zip
- Open a command prompt inside a folder adb. right mouse button l menu, select to open a command window
- copy and paste command [adb devices] (Check Device by Sending below Command)
Example of making sure to connect to the phone
1
Code:
adb devices
2
Code:
adb reboot-bootloader
3
Code:
fastboot devices
If the device does not recognize the phone, it is on "fastboot" android adb interface
Installing [Google ADB Drivers] To Windows 7/8/8.1/10/XP/Vista
- download file Google ADB Drivers.zip
- unlock the bootloader
4
Code:
fastboot flashing unlock
- on the screen text appears, press the Volume + button (all data will be erased)
Attention
The following files(fileFix_vendor.zip+delete_verity_key.zip+Magisk-v20.1.zip) must be placed in an external card, because all phone data will be deleted
Then long press buttons (Power) to turn off the phone
- The bootloader is unlocked. You should see the Orange State (text).
Then turn ON the phone
one more time
- Enable developer options in Android
GO to Settings > Swipe down and tap on About Phone Keep tapping on the build number for 7 times
-Enable the USB debugging option
GO to Settings >System -> Developer options on your Android device and enable the USB debugging option.
when you plug the device into an PC, it will prompt you to allow USB debugging (as seen in the screenshot below).
- Open a command prompt inside a folder adb. right mouse button l menu, select to open a command window
1
Code:
adb devices
2
Code:
adb reboot-bootloader
3
Code:
fastboot devices
- Sew vbmeta.img (the error does not pay attention)
4
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
5
Code:
fastboot flash recovery recovery.img
-After completing:
*Long press buttons (Power) to turn off the phone And quickly Boot into TWRP (buttons Power + Volume Up )
By pressing the volume up selects: recovery mode
and pressing the( volume down) to start TWRP
Changes will not be saved language and settings in (TWRP) Only after all stages have been completed
- Back to the section mount
And put a tick next to all sections on which are placed
- go to the section wipe
- click Format the Data
- In the terminal, Type "yes" and confirm (format action) by click the check mark in the lower right corner
- then you need to reboot again in TWRP
Boot into twrp buttons (Power + Volume Up )
By pressing the volume up selects: recovery mode
and pressing the( volume down) to start TWRP​one more time​
- Go to the section mount
And put a tick next to all sections on which are placed
Back to install
- Flash archive delete_verity_key.zip
- Flash archive Fix_vendor.zip
- Flash archive Magisk-v20.1.zip (Data again to not encrypt)
- Restart the phone
Like everything, use
NEXT
[GUIDE] CUBOT X19​

I just rooted my phone and this guide was very helpful.
- After formatting your phone, boot into recovery through TWRP as my phone keeps bringing up the "no command" error screen if I use "Vol Up + Power"
- When that happens, hold power button for 10 secs, your phone will either turn off or reboot, flash TWRP again and continue.

Successfully Installed TWRP 3.3.1 with SP tool what is did After selecting scatter file from stock firmware i replaced the stock recovery and edit the partition size in the scatter fie for recovery and changed the default path from sp tool default was Recovery-verified i switch it to the Recovery.img that i replaced it with.

Having issues: At the top of the screen its written in red letters as overlay: "TEE key not write Google key not write"
I already applied the "fix Orange state" fix.
Any ideas?

Actually I am using a CubotX19 S and finally I went back to stock rom. That fixed the issue.
However, when I flashed Stockrom I noticed at loading of MT6763 scatterfile, that there are 2 sections having "tee" in their names (see screenshot).
Maybe it would be enough to just flash one or both of those two sections.
I did not do any further research, but maybe this hint os of help for others .
BTW: my screenshot says "Download only" in the Droplist. Actually I flashed using "Firmware Upgrade"
best regards,
bul

where do i get the vbmeta file from?

brezzz said:
where do i get the vbmeta file from?
Click to expand...
Click to collapse
recovery.img + vbmeta.img in folder adb.zip above
or https://www.mediafire.com/file/owuv9h2444w264y/adb.zip/file

flashing vbmeta failed "this partition doesnt exist"

kusti420 said:
flashing vbmeta failed "this partition doesnt exist"
Click to expand...
Click to collapse
Try the following at your own risk ​
You might have a problem partitioning the phone memory
format your phone
flash your phone
select : format all + download
the latest firmware for CUBOT X19 upgrade 2020-04-21
format your phone
Then try again according to the instructions in the next topic
TWRP 3.3.1 + Root CUBOT X19

karim.a said:
Try the following at your own risk ​
You might have a problem partitioning the phone memory
format your phone
flash your phone
select : format all + download
View attachment 5188523
the latest firmware for CUBOT X19 upgrade 2020-04-21
format your phone
Then try again according to the instructions in the next topic
TWRP 3.3.1 + Root CUBOT X19
Click to expand...
Click to collapse
hmm, i tried it just like it said, still cant see a vbmeta partition

karim.a said:
Try the following at your own risk ​
You might have a problem partitioning the phone memory
format your phone
flash your phone
select : format all + download
View attachment 5188523
the latest firmware for CUBOT X19 upgrade 2020-04-21
format your phone
Then try again according to the instructions in the next topic
TWRP 3.3.1 + Root CUBOT X19
Click to expand...
Click to collapse
also i saw someone say that this vbmeta is android 9 thing, but cubot x19 came with android 8.1, should it even have the vbmeta partition? how could i create that partition?

My friend kusti420, follow the instructions below, including upgrading the phone to Android 9 . If your phone has a android 8
Try the following at your own risk​
You might have a problem partitioning the phone memory
format your phone
flash your phone
select : format all + download
the latest firmware for CUBOT X19 upgrade 2020-04-21
format your phone
Then try again according to the instructions in the next topic
TWRP 3.3.1 + Root CUBOT X19

For one reason or another, my serial number of my phone is 0123456789ABCDEF and I can't flash the recovery, neither boot from it, nor flash the modified firmware with it.

I tried to flash vbmeta, but it did not do anything.

chartek1 said:
For one reason or another, my serial number of my phone is 0123456789ABCDEF and I can't flash the recovery, neither boot from it, nor flash the modified firmware with it.
Click to expand...
Click to collapse
How to find phones serial number or IMEI number​
Step 1. Open the Phone app.
Step 2. Dial *#06# on the keypad.
Step 3. Details about your devices IMEI and serial number will automatically appear on the screen.

chartek1 said:
I tried to flash vbmeta, but it did not do anything.
Click to expand...
Click to collapse
format your phone
flash your phone if model number CUBOT X19
the latest firmware for CUBOT X19 upgrade 2020-04-21
select : format all + download
format your phone
Then try again according to the instructions in the next topic
TWRP 3.3.1 + Root CUBOT X19

karim.a said:
format your phone
flash your phone if model number CUBOT X19
the latest firmware for CUBOT X19 upgrade 2020-04-21
select : format all + download
format your phone
Then try again according to the instructions in the next topic
TWRP 3.3.1 + Root CUBOT X19
Click to expand...
Click to collapse
Trash, description on two pages, but no link to TWRP, much to do, nothing to get from./translate/

user132 said:
Successfully Installed TWRP 3.3.1 with SP tool what is did After selecting scatter file from stock firmware i replaced the stock recovery and edit the partition size in the scatter fie for recovery and changed the default path from sp tool default was Recovery-verified i switch it to the Recovery.img that i replaced it with.
Click to expand...
Click to collapse
How do i adjust the file?

karim.a said:
format your phone
flash your phone if model number CUBOT X19
the latest firmware for CUBOT X19 upgrade 2020-04-21
select : format all + download
format your phone
Then try again according to the instructions in the next topic
TWRP 3.3.1 + Root CUBOT X19
Click to expand...
Click to collapse
Should I tick the preloader? I have heared that it might brick the device.

chartek1 said:
Should I tick the preloader? I have heared that it might brick the device.
Click to expand...
Click to collapse
I tick the preloader? NO​If the current Firmware (Stock ROM) for the phone is android 9​​​Instructions to Install​Charge the device battery up to 50%​
Make sure you follow and download all the required files and flash tools on your PC.
Open the flash tool exe file to open the SP Flash Tool User Interface
Tap on the Download option and load both the download agent and the scatter text file in the scatter-loading section.
Once you load the file, click the Download button
To start the upgrade process of stock ROM on your Cubot X19, you need to turn off your device and hold the Volume Down and Volume Up key together and Connect your Phone to PC/Laptop using USB Cable (Keep the Volume Down and Volume Up button until your computer detects the phone.)
When the phone connects, your device will start upgrading the stock firmware
Wait for a few minutes, If you see a green button on your flash tool which means the upgrading process has been completed.
That’s it! You can reboot your Cubot X19

[GUIDE]Universal Rom , Recovery And Kernel Flashing Guide For All Roms , Recoveries , Kernels

TWRP Flashing GUIDE (Linux-Only)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Before following this guide, make sure you have followed the rom flashing guide below the post below or xiaomi.eu rom flashing guide.
If you have followed the flashing guide then you may continue.
Hello Amigos,
You can use this guide to install other recovery than TWRP also.(Other recoveries are listed in the guide itself)
Prerequisites:
Ubuntu/Debian/Ubuntu-Based Distros:
Open terminal
Type sudo apt install adb
Once that is installed.
Type sudo apt install fastboot.
Done.
Fedora:
Open terminal.
Type sudo dnf install android-tools.
Let it install and done.
OpenSUSE:
Download this official package from here according to your version :
https://software.opensuse.org/download.html?project=hardware&package=android-tools
(Use either one the add repository and install manually or grab binary packages directly options.)
Steps to install
Then go to your custom rom download thread and check the date of rom file (In this case derpfest) and choose the recovery version closest to the release date of your rom.
Download the latest platform-tools for linux from the Android developer site and extract the zip in an easily accessible folder
Download the recovery image file
Restart your device to fastboot mode
Method 1:
Using this adb command if you have USB debugging active on your device:
adb reboot bootloader
Method 2:
- Turn off your device
- After it has completely turned off, press and hold Vol - and the Power button at the same time until the word "FASTBOOT" comes out Method 3:- Turn off your device
- Press and hold Vol - button
- Connect the USB cable (previously connected to the PC) to the device and press and hold the button until the word "FASTBOOT" comes out
4. Connect your device to the PC
5. Open a terminal window in the folder where you extracted the binaries from the archive from step 1
Easy method: Open the folder, and open a terminal in the folder itself. Terminal will open a window directly in the folder location
6. Verify that your device is recognized by fastboot using this command:
fastboot devices
If your device has been detected (a serial number followed by the word fastboot), you can continue. Otherwise, check if the drivers are installed correctly, although if you used Mi Unlock and were able to unlock the device correctly on the PC you are using, you should not have problems with that.
7. Type this command in the terminal window, but don't press Enter yet, just type it and leave a space at the end:
fastboot flash recovery_
Don't write the "_". This only indicates the space you should leave at the end.
8. Now, drag the image file (yourrecoveryhere.img) to the terminal window and drop it above the window . This will make you copy your exact location for convenience.
fastboot flash recovery "home/user/location/to/your/file/yourrecoveryhere.img""
Quotation marks are only added if the entire location has spaces.
Otherwise, it is displayed without quotation marks.
9. Press Enter and wait a few seconds . Once it shows that it is successfully flashed hold the Vol Up + Power button , once the device restarts release the power button and keep the Vol Up button pressed , after a few seconds the TTWRP logo will show , release the Vol Up button now.
DONE! You've started perfectly in recovery
This guide applies to all recoveries:
NOTE:
If your rom mentions to use a specific recovery then use that instead
To flash shrp recovery you have to extract the .img from the zip file of the recovery that you downloaded ,then flash it in the same way as told above , make sure after booting in the recovery you flash the zip file of the shrp recovery from which you extracted the .img file in the recovery itself.
DO NOT USE ORANGE FOX RECOVERY ! It is deprecated and unmaintained so it wont be updated in future .
If mtp not working or device not getting detected as a portable device in any recovery then watch this guide here: GUIDE
Download Link
TWRP Download (If your rom mentions to use NSE TWRP then use the NSE TWRP with the closest android Version to your rom's android version or else if it doesn't specifically mention any twrp version then use the normal TWRP , the one without NSE in its name, with the closest android version to your rom's android version ):
https://www.pling.com/p/1346294/
SHRP Download:
https://sourceforge.net/projects/shrp/files/Beryllium/
Enjoy !
---------------------------------------------------------------------------------------------------------------------------
TWRP Flashing Guide (Windows-Only)
Before following this guide, make sure you have followed the rom flashing guide below the post below or xiaomi.eu rom flashing guide.
If you have followed the flashing guide then you may continue.
Hello Amigos,
You can use this guide to install other recovery than TWRP also.(Other recoveries are listed in the guide itself)
Steps to install
First of all unlock bootloader of your device . Search net for more info.
After this install adb drivers from here: https://forum.xda-developers.com/t/...reborn-v2-0-adb-fastboot-and-drivers.3854109/
Choose skip install for adb and install google drivers.
Connect your device in fastboot mode to your pc.
Go into device manager , right click on unrecognized android device , choose update drivers , let me pick from a list of drivers , select adb drivers , android bootloader interface and click install.
Then go to your custom rom download thread and check the date of rom file (In this case derpfest) and choose the recovery version closest to the release date of your rom.
Make sure you have the bootloader unlocked before you start. There are many guides on the internet for that.
Download the latest platform-tools from the Android developer site and extract the zip in an easily accessible folder
Download the recovery image file
Restart your device to fastboot mode
Method 1:
Using this adb command if you have USB debugging active on your device:
adb reboot bootloader
Method 2:
- Turn off your device
- After it has completely turned off, press and hold Vol - and the Power button at the same time until the word "FASTBOOT" comes out Method 3:- Turn off your device
- Press and hold Vol - button
- Connect the USB cable (previously connected to the PC) to the device and press and hold the button until the word "FASTBOOT" comes out
4. Connect your device to the PC
5. Open a cmd window in the folder where you extracted the binaries from the zip from step 1
Easy method: Open the folder, and without leaving it, type "cmd" in the address bar of the file explorer and press enter. Command promt will open a window directly in the folder location
6. Verify that your device is recognized by fastboot using this command:
fastboot devices
If your device has been detected (a serial number followed by the word fastboot), you can continue. Otherwise, check if the drivers are installed correctly, although if you used Mi Unlock and were able to unlock the device correctly on the PC you are using, you should not have problems with that.
7. Type this command in the cmd window, but don't press Enter yet, just type it and leave a space at the end:
fastboot flash recovery_
Don't write the "_". This only indicates the space you should leave at the end.
This is how it should look when you write it:
8. Now, drag the image file (yourrecoveryhere.img) to the command window and drop it above the window. This will make you copy your exact location for convenience.
- The result should be this:
Code:
fastboot flash recovery "C:\location\to\your\file\yourrecoveryhere.img"
Quotation marks are only added if the entire location has spaces.
Otherwise, it is displayed without quotation marks.
9. Press Enter and wait a few seconds . Once it shows that it is successfully flashed hold the Vol Up + Power button , once the device restarts release the power button and keep the Vol Up button pressed , after a few seconds the TWRP logo will show , release the Vol Up button now.
DONE! You've started perfectly in recovery
This guide applies to all recoveries:
NOTE:
If your rom mentions to use a specific recovery then use that instead
To flash shrp recovery you have to extract the .img from the zip file of the recovery that you downloaded ,then flash it in the same way as told above , make sure after booting in the recovery you flash the zip file of the shrp recovery from which you extracted the .img file in the recovery itself.
DO NOT USE ORANGE FOX RECOVERY ! It is deprecated and unmaintained so it wont be updated in future .
If mtp not working or device not getting detected as a portable device in any recovery then watch this guide here: GUIDE
Download Link
TWRP Download (If your rom mentions to use NSE TWRP then use the NSE TWRP with the closest android Version to your rom's android version or else if it doesn't specifically mention any twrp version then use the normal TWRP , the one without NSE in its name, with the closest android version to your rom's android version ):
Recovery For Poco F1
Team Win Recovery ProjectWht Works : * EVERYTHINGS *BUG : * You Tell Me *
www.pling.com
SHRP Download:
https://sourceforge.net/projects/shrp/files/Beryllium/
Enjoy !
---------------------------------------------------------------------------------------------------------------------------
ROM Flashing GUIDE (Windows-Only)
First of all unlock bootloader of your device . Search net for more info.
After this install adb drivers from here: https://forum.xda-developers.com/t/...reborn-v2-0-adb-fastboot-and-drivers.3854109/
Choose skip install for adb and install google drivers.
Connect your device in fastboot mode to your pc.
Go into device manager , right click on unrecognized android device , choose update drivers , let me pick from a list of drivers , select adb drivers and click install.
Then go to your custom rom download thread and check the date of rom file(In this case derpfest).
Check the date of file.
Then go to xiaomifirmwareupdater.com and select rom archive and select your device.
Then MIUI downloads page will appear. type fastboot in search and look for a MIUI global version released
as the same or very close to the Custom ROM date (in this case it is this)
Download the fastboot version according to the date.
Go into the stock rom folder and double click on flash_all.bat(all data will be lost) .
Or open cmd in the folder and type flash_all.bat in cmd and hit enter.(This method allows to look for errors)
A cmd window will popup with fastboot commands automatically and after complete flashing of rom will close automatically. (approx. 20-25 mins)
Let the device boot into MIUI.
Once it boots, power it off . Then press the vol down + power button until fastboot in orange letters appear.
Then follow the twrp flashing guide from here
Then flash the ROM according to the instructions.
NOTE:
Make sure to always extract and move the stock rom folder in root of C: drive (this helps avoid flashing errors)The path should look something like this:
C:\beryllium_global_images_YourVersionhere
Then flash the stock rom.
Clean Flashing a ROM:
I hope you have followed the entire guide above before doing this step.
Reboot to recovery.
Format data.
Flash ROM file.
Wipe Dalvik Cache.
Reboot and enjoy.
Everytime you do a clean flash, you must redo all the steps above.
If a rom does not include flashing instructions, it requires a clean flash.
If a rom mentions to wipe something in advanced wipe , then wipe ONLY that and nothing else.
If rom mentions clean flash and not wiping of anything else then dont be smart to wipe anything unecessary.
If your rom mentions to use a specific recovery then use that instead
Always flash magisk after the first boot of your rom
If mtp not working or device not getting detected as a portable device in any recovery then watch this guide here: GUIDE
Do not replace the recovery or try to update recovery that comes with roms. This can brick your device
Enjoy!
---------------------------------------------------------------------------------------------------------------------------
ROM Flashing GUIDE (Linux-Only)
Prerequisites:
Ubuntu/Debian/Ubuntu-Based Distros:
Open terminal
Type sudo apt install adb
Once that is installed.
Type sudo apt install fastboot.
Done.
Fedora:
Open terminal.
Type sudo dnf install android-tools.
Let it install and done.
OpenSUSE:
Download this official package from here according to your version :
https://software.opensuse.org/download.html?project=hardware&package=android-tools
(Use either one the add repository and install manually or grab binary packages directly options.)
First of all unlock bootloader of your device . Search net for more info.
Then go to your custom rom download thread and check the date of rom file(In this case derpfest).
Check the date of file.
Then go to xiaomifirmwareupdater.com and select rom archive and select your device.
Then MIUI downloads page will appear. type fastboot in search and look for a MIUI global version released
as the same or very close to the Custom ROM date (in this case it is this)
Download the fastboot version according to the date.
Go into the stock rom folder and right click in empty area then select open terminal here then type this command:
./flash_all.sh
A terminal window will popup with fastboot commands automatically and after complete flashing of rom will close automatically. (approx. 20-25 mins)
Let the device boot into MIUI.
Once it boots power it off . Then press the vol down + power button until fastboot in orange letters appear.
Then follow the twrp flashing guide from here
Then flash the ROM according to the instructions.
NOTE:
Make sure to always extract and move the stock rom folder in root of home directory (this helps avoid flashing errors)The path should look something like this:
home\beryllium_global_images_YourVersionhere
Then flash the stock rom.
Clean Flashing a ROM:
I hope you have followed the entire guide above before doing this step.
Reboot to recovery.
Format data.
Flash ROM file.
Wipe Dalvik Cache.
Reboot and enjoy.
Everytime you do a clean flash, you must redo all the steps above.
If a rom does not include flashing instructions, it requires a clean flash.
If a rom mentions to wipe something in advanced wipe , then wipe ONLY that and nothing else.
If rom mentions clean flash and not wiping of anything else then dont be smart to wipe anything unecessary.
If your rom mentions to use a specific recovery then use that instead
Always flash magisk after the first boot of your rom
If mtp not working or device not getting detected as a portable device in any recovery then watch this guide here: GUIDE
Do not replace the recovery or try to update recovery that comes with roms. This can brick your device.
Enjoy!
---------------------------------------------------------------------------------------------------------------------------
Kernel Flashing GUIDE:
Always Flash a custom kernel after the first boot of the device in a rom which was clean flashed.
Always take a backup of your rom's boot.img incase something goes wrong.
NGK Kernel:
Download the latest nse version (if your rom is nse rom)
Then store it somewhere in your internal storage
Boot to twrp
Flash NGK NSE kernel zip
Wipe Cache Dalvik
Reboot To Syste,
NOTE:
If your rom doesnt mention if it is a nse or se rom then you may download both nse and se versions of the kernel . Then boot into twrp and flash nse version as above . If your device gets bricked , bootlooping , restart to recovery or fastboot , Then boot into recovery again and flash se version as above . After this your problem should be fixed . Still if something goes wrong , boot into recovery and flash boot.img of your rom.
LawRun Kernel:
Download the kernel version according to this index:
10-11-12 in the name here mentions the android versions supported . Android Version supported in this version of kernel is android 10 ,11,12 or android q , android r and android s.
09 , P or Pie here in the name mentions android version supported . Android Version supported in this version of kernel is android 9 or android pie.
10 or Q in the name mentions android 10 is supported.
10-2-13 in the name here mentions that android 10 to android 13 roms are supported
Store the kernel zip somewhere in your internal storage
Boot into twrp
Flash LawRun Kernel Zip
Wipe Cache Dalvik
Reboot to System
If something goes wrong , boot into recovery and flash boot.img of your rom.
NOTE:
Do check the kernel version and description at the download page of the kernel to know whether it is overclocked or not.
Genos Kernel:
Download the kernel version according to this index:
If there is nothing in the name only R21 or Rxx or r17.1re or rXXre or r16.0_evol or rXX_evol or r11_evolution or rXX_evolution or r16.1_evo or rXX_evo (xx corresponding to the version of the kernel) then it supports MIUI , OOS (Oxygen OS) , AOSP (Custom Roms).
If there is r12_non_oos or rXX_non_oos in the name (xx corresponding to the version of the kernel) then it doesnt support OOS (Oxygen OS) and only supports MIUI,AOSP(Custom Roms)
If there is r12_oos or rXX_oos or r12_evol_oos or rXX_evol_oos in the name (xx corresponding to the version of the kernel) then it only supports OOS (Oxygen OS) and dosent support MIUI,AOSP(Custom Roms)
Store the kernel zip somewhere in your internal storage
Boot into twrp
Flash Genos Kernel Zip
Wipe Cache Dalvik
Reboot to System
If something goes wrong , boot into recovery and flash boot.img of your rom.
Enjoy !
---------------------------------------------------------------------------------------------------------------------------