Ok i rooted my asus 4max on my old computer I had it rooted for a while and one day hit the wrong option and deleted the os and tarp. I hook it up to adb and it won't detect my device I'm unsure of how to fix this. When rooted I used windows now I'm using linux not sure if this plays any part in it or not. Please any help.
Re-flash phone's Stock ROM. You do this by means of SP Flash Tool. A Linux version of it exists
SP Flash Tool v5.1916 for Linux - MediaTek Flash Tool
Download SP Flash Tool v5.1916 for Linux to flash or install Stock Firmware ROM (Flash File) on the devices powered by Mediatek Chipset.
spflashtools.com
Related
i need a recovery that you flash via flash tool to jiayu g4sl,
and about the flash tool ,i actually have the software but i'm not sure if i have the mtk files or drivers.
and by the way can you also give me a rom that can be flashed(4.4 preferable).
thanks in advance.
SP Flash Tool is a user friendly tool designed for MediaTek devices like Tecno, Infinix, Innjoo, Gionee, BML, etc. SP Flash Tool is a great piece of software allows you to flash your Smartphones ROMs (Stock or Custom). It supports flash stock, installing custom recovery, Unbrick the Bricked Smartphones and firmware updates for your Mediatek devices. Below are the guide to Flash Custom ROMs using SP Flash Tool on Windows Computer.
Materials Needed
1. SP Flash tool - Download it
2. Android ADB drivers - Download it
3. Stock or Custom Rom you want to flash on your Smartphone. Make sure you download the exact Rom of your phone .
4. Laptop or Desktop Computer
5. USB Cable for communicating between PC and Smartphones
To Flash a Backup or ROM with SP Flash Tool
Disclaimer: Don't flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM. Shelaf take no responsibility for any harm done while attempting this!
1. Disconnect your phone if connected with USB to the PC, and turn OFF the phone completely, also take out the battery if possible (ignore this step 1, for phones with built in battery).
2. Now connect or reconnect the USB cable to the phone with the PC while the phone is still off, Windows should pop up and begin to install the MTK65XX Preloader Drivers, this only happens if you installed the Mediatek Preloader USB Drivers correctly in Windows. After they successfully installed, disconnect the USB cable again.
2. Extract SP Flash tool on your computer and launch it.
3. Open the folder you extract it to and locate flash_tool, double click on it to open.
3. Once it is launched, hit the Scatter-loading button
4. Locate the scatter file in the backup or Rom of the phone that you downloaded. It's usually a text file. (ALWAYS only load a ROM that is 100% made for your phone, flashing a wrong ROM may make your phone non-bootable).
5. Hit the "Download' button in SP Flash Tool to begin the flashing process
6. Connect your Smartphone to the computer with a USB without battery, if possible to remove. Press, Vol Down or Up so that the computer can easily detect the phone.
7. Once the Flashing is complete you will see a green circle confirming... With Download OK
.
8. Close the SP Flash Tool and disconnect your phone from the computer. Congratulation, your Smartphone is now flashed with the new Stock Rom you downloaded.
Download link sp flash tool:-http://d-h.st/w6v
If your phone bootloops, remove battery and boot into recovery mode. Factory reset the phone
Hello!
I accidentally flashed wrong boot image on my phone via twrp and then I tap on reboot/system after that phone didn't boot.
No response.
Not turning on even I reinsert the battery!
No going to fastboot or Recovery mode!
SP flash tool didn't able to flash rom.
It always shows error.
I think I need to re-programme emmc chip?
Boot information stored in emmc right?
Is it ok/right?
Or is there another method to revive it?
(please help about this issue)!
Phone:- Infinix Smart 3 plus.
OS:- pie/9.0
CPU:- MTK 6761/Helio A22.
@AR1300 said:
Hello!
I accidentally flashed wrong boot image on my phone via twrp and then I tap on reboot/system after that phone didn't boot.
No response.
Not turning on even I reinsert the battery!
No going to fastboot or Recovery mode!
SP flash tool didn't able to flash rom.
It always shows error.
I think I need to re-programme emmc chip?
Boot information stored in emmc right?
Is it ok/right?
Or is there another method to revive it?
(please help about this issue)!
Phone:- Infinix Smart 3 plus.
OS:- pie/9.0
CPU:- MTK 6761/Helio A22.
Click to expand...
Click to collapse
Just reflash the Stock boot.img via fastboot if available.
Or Flash the whole stock ROM via TECHNO FLASH TOOL it is the only Flash tool compatible with TRANSSION DEVICE. Sp doesn't work... And make sure you have installed proper drivers
*ANDROID CDC
*Preloader USB VCOM
Sent from my Infinix-X650C using XDA Labs
Thanks.
AshhRED said:
Just reflash the Stock boot.img via fastboot if available.
Or Flash the whole stock ROM via TECHNO FLASH TOOL it is the only Flash tool compatible with TRANSSION DEVICE. Sp doesn't work... And make sure you have installed proper drivers
*ANDROID CDC
*Preloader USB VCOM
Sent from my Infinix-X650C using XDA Labs
Click to expand...
Click to collapse
Thanks for advice but I used that advance options of SP flash tool for force flashing and it worked
Abdulrehman130 said:
Thanks for advice but I used that advance options of SP flash tool for force flashing and it worked
Click to expand...
Click to collapse
Glad you recovered, join these Telegram groups for quick support for your Android..
https://t.me/infinixhot8
https://t.me/androidwithlinux_discussion
https://t.me/Infinixfansclub
Sent from my Infinix-X650C using XDA Labs
What custom kernel can I install on infinix smart 3 plus
Hi everyone, I tried to flash a patched Magisk boot image on my Ulefone Armor 8 Pro via fastboot but the device is now stuck in bootloop. I have already read some threads about trying to flash the stock firmware using the proprietary SP Flash Tool, but the phone doesn't remain in download mode for more than a few seconds. I can't even boot in recovery/fastboot mode again to try to flash the stock boot image since the phone just keeps rebooting. If someone could give me a hint it would be really appreciated.
stwm25 said:
Hi everyone, I tried to flash a patched Magisk boot image on my Ulefone Armor 8 Pro via fastboot but the device is now stuck in bootloop. I have already read some threads about trying to flash the stock firmware using the proprietary SP Flash Tool, but the phone doesn't remain in download mode for more than a few seconds. I can't even boot in recovery/fastboot mode again to try to flash the stock boot image since the phone just keeps rebooting. If someone could give me a hint it would be really appreciated.
Click to expand...
Click to collapse
You need write the model of device.
Currently I know of 3 models: 4GB RAM(Armor 8); 6&8GB RAM(Armor 8 Pro).
So with the correct stock ROM you can flash the device.
To use SPFT you need to specify which OS you have: Linux; Win7_8_10; other
This is to know if you actually installed the USB MTK drivers correctly and if further action is needed.
Also, write if you have the device with the bootloader locked or unlocked.
I have the 6GB RAM and have downloaded a time ago the GQ3090RH3_KSX70H_Ulefone_20210902_V01(Non-EU).zip file aka stock ROM. That's aka Non_EEA model. In the Ulefone site have SP_MDT_exe_v3.2048.02.00(Client).zip aka flash tool.
You used that tool?
Thanks for the reply. I have the model with 6GB of RAM as well and I am currently trying to recover my phone by using Windows 11 in a virtual machine. The bootloader is unlocked and I tried to flash the EU version of the stock ROM (GQ3090RH3_KSX70H_Ulefone_EEA_20210902_V01(EU).zip) by using SP_MDT_exe_v3.2048.02.00(Client).zip (after installing the required drivers), but as I have already specified I can't boot in download mode for more than a few seconds. My computer recognises the device as "MediaTek MT65xx Preloader" but the phone immediately reboots and I am not able to flash the stock ROM.
stwm25 said:
Thanks for the reply. I have the model with 6GB of RAM as well and I am currently trying to recover my phone by using Windows 11 in a virtual machine. The bootloader is unlocked and I tried to flash the EU version of the stock ROM (GQ3090RH3_KSX70H_Ulefone_EEA_20210902_V01(EU).zip) by using SP_MDT_exe_v3.2048.02.00(Client).zip (after installing the required drivers), but as I have already specified I can't boot in download mode for more than a few seconds. My computer recognises the device as "MediaTek MT65xx Preloader" but the phone immediately reboots and I am not able to flash the stock ROM.
Click to expand...
Click to collapse
Win11 is not good to use SP tool.
Maybe using Win10?!
"MediaTek MT65xx Preloader" is normal but need installing drivers correctly. You can try this: Driver_Auto_Installer_EXE_v5.1632.00.zip - 8.8MB
Reboot VM and try with the device turned off!
For using SPFT or SP_MDT your device not need in the bootloader mode. Device turned off - conect USB - look about USB PORT COM - Scan - Start All
If you not know how to do so Read Upgrade software guide for factory assembly line.pdf
Here file and more about: Upgrade tools and USB driver - Armor 8 Pro
___________________________
UP: Maybe SP need more than you know.
I used the SPFT and worked good to me with Win10.
May be SPFT can help more than SP: SP_Flash_Tool_v5.2124_Win
For using SPFT your device not need in the bootloader mode. Device turned off - open sxcatter file - look for Download Only option (NOT use FORMAT+....!!!!) - now with the device turned off conect USB - press DOWNLOAD (Ctrl + D).
Well, you saved my phone. Thanks for the help, I really appreciate that. I installed Windows 10 and the drivers you linked me and via SP Flash Tool I managed to flash the stock ROM after connecting the device with a USB cable. Thanks again.
How do I get this phone into download mode? Cannot seem to get it to flash
I've followed your tips but I cannot get the phone recognized by the flash tool.
I've collected full details here: https://android.stackexchange.com/questions/248035/bootloop-in-ulefone-armor-8-pro
Can SPFT be used with Linux?
jlbradl said:
How do I get this phone into download mode? Cannot seem to get it to flash
Click to expand...
Click to collapse
I know the fastboot mode. It is entered by pressiong Volume + and power button simultaneously.
stwm25 said:
Thanks for the reply. I have the model with 6GB of RAM as well and I am currently trying to recover my phone by using Windows 11 in a virtual machine. The bootloader is unlocked and I tried to flash the EU version of the stock ROM (GQ3090RH3_KSX70H_Ulefone_EEA_20210902_V01(EU).zip) by using SP_MDT_exe_v3.2048.02.00(Client).zip (after installing the required drivers), but as I have already specified I can't boot in download mode for more than a few seconds. My computer recognises the device as "MediaTek MT65xx Preloader" but the phone immediately reboots and I am not able to flash the stock ROM.
Click to expand...
Click to collapse
did you fix your phone?
Alex76rod said:
did you fix your phone?
Click to expand...
Click to collapse
i have the same problem.
it wont stay turn off
so the sp tool can't flash it.
Advantages of Flashing stock rom:
If your device is dead, you can unbrick using the Stock ROM
You can fix the boot loop issue on Realme Narzo 30 Pro 5G
Fix Unfortunately, the app has stopped error
Fix Network related issue
Fix No OTA Updates issue
Patch Boot image to Root using Magisk: Guide
You can unroot by flashing stock Boot image
Restore Realme Narzo 30 Pro 5G back to Factory State
Note: Fashing stock will remove all apps and files from your device and return it to Factory State
Disclaimer : I am not responsible for any loss or damage to your device.
Prerequisite :
Unlocked Bootloader
Stock Rom (Firmware) All credit goes to the uploader
MTK Drivers.zip
MTK Bypass Tool.zip Credits : BKerler and Balveer Jat
SP Flash Tool.zip
Method 1 (SP Flash tool) :
How to flash stock rom:
1. Extract all zip filesSP Flash Tool :2. Open SP Flash Tool folder and run flash_tool.exeIf you get an error click OK an continue3. Click on choose for Download-Agent and select MTK_AllInOne_DA.bin file 'located in SP Flash Tool folder'4. Click on choose for Scatter-loading File and select MT6853_Android_scatter file 'located in Stock Rom folder'5. Click on choose for Authentication File and select auth_sv5.auth file 'located in Stock Rom folder'All the files will be loaded in the flash_tool6. Minimize flash_tool
MTK Client :7. Open MTKClient GUI 2.0 folder and run Bypass.exe, select option 3 by using keyboard down arrow key and press enter.8. It will ask do you want to continue?, type y and press enterTool will be waiting for device to connect9. Switch off your phone10. Hold volume up and volume down together and connect phone to PC with USB cable11. Tool will detect the phone and start the bypass processSP Flash Tool :12. One It's completed go to flash_tool and click download13. Flashing will start, don't disconnect your phone in between14. Once download is completed, you will be prompted will green tick sign15. Disconnect your phone and switch it on by holding power keyYou have flashed stock rom successfully ╰(*°▽°*)╯
If device isn't booting let it reboot 2-3 times, it will boot into recovery. Click wipe and format data in recovery.
Method 2 (MTK Client) :
Flash with MTK Client GUI | Thanks bkerler
Download MTK Tool flashable stock rom here
Please provide the full backup for RMX2117 Realme NArzo 30 Pro 5G, need Oppo_Custom.img of this phone as touch wifi is not working under recovery.
ERROR: STATUS_DEVICE_CTRL_EXCEPTION (0XC0050001) - while flashing the provided rom
AK_8K said:
ERROR: STATUS_DEVICE_CTRL_EXCEPTION (0XC0050001) - while flashing the provided rom
Click to expand...
Click to collapse
Sp flash tool doesn't flash all partitions, you must be on same Android version as the provided rom!
To flash all partitions, you need to use MTK Client flashable stock rom. You can find the MTK Client flashable rom on our Telegram community
NinjaChunks said:
Sp flash tool doesn't flash all partitions, you must be on same Android version as the provided rom!
To flash all partitions, you need to use MTK Client flashable stock rom. You can find the MTK Client flashable rom on our Telegram community
Click to expand...
Click to collapse
can you please provide me a stock rom, the above rom is causing bootloop and not displaying anything
need Oppo_Custom.img of rmx2117