Database Info

HTC desire 816 soft bricked!

Hi guys,
I have a very bad problem with my HTC Desire 816G, it bricked and i can't now flash the stock or custom rom!
When i turn on my device it going to the stock recovery!
bootloader is unlock, i want to install the TWRP but i can't because i can't access the fastboot!
I don't know what i must do! I'm so worry and uneasy! plz help me...

alirezarz62 said:
Hi guys,
I have a very bad problem with my HTC Desire 816G, it bricked and i can't now flash the stock or custom rom!
When i turn on my device it going to the stock recovery!
bootloader is unlock, i want to install the TWRP but i can't because i can't access the fastboot!
I don't know what i must do! I'm so worry and uneasy! plz help me...
Click to expand...
Click to collapse
In stock recovery, if there's an option like 'Reboot into bootloader', that's the fastboot mode, enter it and flash TWRP..
If there's no other way, flash the original firmware from here: http://androidtechnics.blogspot.in/2015/06/htc-desire-816g-htc-d816h-dual-sim.html using SP Flash Tool..
How did you soft-brick your device first of all?

GokulNC said:
In stock recovery, if there's an option like 'Reboot into bootloader', that's the fastboot mode, enter it and flash TWRP..
If there's no other way, flash the original firmware from here: using SP Flash Tool..
How did you soft-brick your device first of all?
Click to expand...
Click to collapse
there is no option like that in the stock recovery!
i just downloaded the stock rom and tried to flash with SP Flash Tool but device is not detected by pc!
i unlocked the bootloader and then i reset the phone, device began updating with the stock update center for the stock rom! and...

alirezarz62 said:
there is no option like that in the stock recovery!
i just downloaded the stock rom and tried to flash with SP Flash Tool but device is not detected by pc!
i unlocked the bootloader and then i reset the phone, device began updating with the stock update center for the stock rom! and...
Click to expand...
Click to collapse
Install VCOM drivers and Android CDC Gadget drivers in computer and connect phone in switch off mode..

GokulNC said:
Install VCOM drivers and Android CDC Gadget drivers in computer and connect phone in switch off mode..
Click to expand...
Click to collapse
still doesn't detect! sorry, what do you mean of switch off mode?:crying:

alirezarz62 said:
still doesn't detect! sorry, what do you mean of switch off mode?:crying:
Click to expand...
Click to collapse
Remove battery for 5 secs, then put it inside and connect to computer

GokulNC said:
Remove battery for 5 secs, then put it inside and connect to computer
Click to expand...
Click to collapse
Unfortunately this device has no removable battery!
is there any other way?

I was trying to flash cm 12 thats how i bricked and sp flash tool is not working in my case. my boot loader is unlocked . when i reboot system from cwm recovery it restarts to cwm recover itself help fix plz.

Bricked zenfone 5;no usb or intel/asus logo appearing on screen on boot up.

This happened while im following a tutorial on youtube on how to fix a bricked zenfone 5. i've followed the steps correctly but i thing flashed the wrong file for the command "fastboot flash splashscreen". Is my zenfone hardbricked or softbricked?can my phone be fixed?help me fix my phone if possible. Advance thanks to all.

does youre mobile show some warning or died..?
Sent from my SM-G7102 using Tapatalk

anjo101 said:
This happened while im following a tutorial on youtube on how to fix a bricked zenfone 5. i've followed the steps correctly but i thing flashed the wrong file for the command "fastboot flash splashscreen". Is my zenfone hardbricked or softbricked?can my phone be fixed?help me fix my phone if possible. Advance thanks to all.
Click to expand...
Click to collapse
First do a format (except bootloader) via sp flash tool
Ten flash it again with battery inserted

EMONESSboy said:
does youre mobile show some warning or died..?
Sent from my SM-G7102 using Tapatalk
Click to expand...
Click to collapse
No, it does not show any warning. There is no item in the screen. Just a blank screen with lights on when booting up.Btw, thanks for the reply.

rcrajarshi12 said:
First do a format (except bootloader) via sp flash tool
Ten flash it again with battery inserted
Click to expand...
Click to collapse
what is this sp flash tool?is it the smart phone flash tool? my phone has intel processor. I've search sp flash tool and it's only for mediatek processors.

anjo101 said:
what is this sp flash tool?is it the smart phone flash tool? my phone has intel processor. I've search sp flash tool and it's only for mediatek processors.
Click to expand...
Click to collapse
Then you can use the "Intel Phone Flash Tool" to format the phone(Be carefully, do not format bootloader)

Guide To Unbrick RealMe 1[CPH1859/1861/1706]-[A.29]

Code:
[CENTER]If You Have Hard Bricked Your Device Then Only Use This Guide[/CENTER]
CPH1861EX_11.A.29​
Files You Need To Download:
1:Miracle Box Tool-https://mega.nz/#!lVsQGSaC!6TTJopMyntMQA0IKYdC_5BlsxIjV_Ibhx2qWL_ZqDyI
2:Stock Rom- https://mega.nz/#F!ncMFUaaa!0fVNwJ_Io0EMFv8YLjBZlQ [Select Download As Zip]
3:https://androidmtk.com/install-android-cdc-driver-manually [Install Drivers Using This Guide]​
Click to expand...
Click to collapse
Steps To Flash Stock Rom:
1:Install Miracle Box And Drivers
2:Launch Miracle Box
3: Open Mtk Tab
4:Click on Services
5:Select Write From The Available Options
6:Select 8th Boot From Boot Options
7:In Second Options,Select Oppo Realme 1
8:Check Skip Preloader File
9:Hit Start
10:Now connect your phone and hold volume and power buttons... It will flash and turn off your phone
11:Remove Cable And Press Power+VOLUME Up For 15 Seconds
You Have Unbricked Your Device​
Click to expand...
Click to collapse
Credits:
Hamza(From Telegram Group For Writing The Tutorial0
Shobith(For Stock Rom Dump)
AnuragRai(For Simplifying The Guide)

1st link miracle box is not working plz correct it bro

can you share download links from other providers? mega asks for premium account.
thank you.

Didn't work for me
anurag rai said:
Code:
[CENTER]If You Have Hard Bricked Your Device Then Only Use This Guide[/CENTER]
CPH1861EX_11.A.29​
Credits:
Hamza(From Telegram Group For Writing The Tutorial0
Shobith(For Stock Rom Dump)
AnuragRai(For Simplifying The Guide)
Click to expand...
Click to collapse
After flashing twrp recovery when I booted my device, a software update popped up and it automatically updated over night and my device hard bricked. I tried everything but couldn't fix it. My pc is not even recognising my phone so can't follow your steps. Any suggestion or help to fix my device will be appreciated.

same mine bro,
rom version was a31 and after installed twrp, my device hard bricked. i couldnt solve yet, waiting a newer version of miracle box or etc.

anurag rai said:
Code:
[CENTER]If You Have Hard Bricked Your Device Then Only Use This Guide[/CENTER]
CPH1861EX_11.A.29​
Credits:
Hamza(From Telegram Group For Writing The Tutorial0
Shobith(For Stock Rom Dump)
AnuragRai(For Simplifying The Guide)
Click to expand...
Click to collapse
i dumped the stock rom bro @besttipsYT Not Shobith

this method is not working at this time...when i trying to flash by this method only show.......phone connected......downloding boot8....then disconnect my phone ..&reboot

Please don't flash custom recovery (here twrp) without proper knowledge or just sake of modding device. The builds and methods are not always working and may end up bricking your device.

Hi There, Can someone PLZ help me setting up OPPO PRELOADER Drivers correctly. Everytime i try to use miracle thunder i get the following log:
Waiting for USB Port...
Set USB Serial Device (COM9)
Connecting to Phone,Wait..
Connected to Phone.
CPU: MT6771 SW:0000 Ver: CA00
>>Downloading Boot8 ...
and it remains on here forever.
Actually oppo preloader shows for some time in pc and after that it goes away and hence it is not letting the miracle thunder work properly (i guess)
when my phone was working (booting in coloros 6, then also oppo preloader was doing the same thing and after a few seconds my battery would start charging), now i can't see anything on screen as it's bricked now.
Preloader doesn't even work with SP Flash Tools also.
EDIT : I have tried almost everything i knew, drivers manager add legacy option etc.
If someone could help me get out of this problem, i would really be grateful.
Brick Reason : Flashed TWRP but used fastboot command to boot into that : (
PLEASE HELP SOMEONE

Alen012 said:
Hi There, Can someone PLZ help me setting up OPPO PRELOADER Drivers correctly. Everytime i try to use miracle thunder i get the following log:
Waiting for USB Port...
Set USB Serial Device (COM9)
Connecting to Phone,Wait..
Connected to Phone.
CPU: MT6771 SW:0000 Ver: CA00
>>Downloading Boot8 ...
and it remains on here forever.
Actually oppo preloader shows for some time in pc and after that it goes away and hence it is not letting the miracle thunder work properly (i guess)
when my phone was working (booting in coloros 6, then also oppo preloader was doing the same thing and after a few seconds my battery would start charging), now i can't see anything on screen as it's bricked now.
Preloader doesn't even work with SP Flash Tools also.
EDIT : I have tried almost everything i knew, drivers manager add legacy option etc.
If someone could help me get out of this problem, i would really be grateful.
Brick Reason : Flashed TWRP but used fastboot command to boot into that : (
PLEASE HELP SOMEONE
Click to expand...
Click to collapse
Miracle box, SP Flash Tool and MTK Droid Tools no longer work with Realme. If you can access Fastboot then flash stock recovery and proceed further.

Bootloop if i try t access fastboot mode. Can go to recovery but its not allowing me to flash amything saying its an older version. Any work around yet?
Naveen56 said:
Miracle box, SP Flash Tool and MTK Droid Tools no longer work with Realme. If you can access Fastboot then flash stock recovery and proceed further.
Click to expand...
Click to collapse

StripsOfTatti said:
Bootloop if i try t access fastboot mode. Can go to recovery but its not allowing me to flash amything saying its an older version. Any work around yet?
Click to expand...
Click to collapse
Which recovery are you in? Is it Stock or Custom?
If u have stock first wipe data and then flash boot.img or ozip file (stock ROM).
If u have custom recovery then you need to flash stock recovery + stock ROM.

plz help me ihave realme 1 and it stuck in logo and orange state and restart over and over and icannot boot into recovery or fastboot plz help me

Simba Gaara said:
plz help me ihave realme 1 and it stuck in logo and orange state and restart over and over and icannot boot into recovery or fastboot plz help me
Click to expand...
Click to collapse
If recovery and fastboot are inaccessible means you need to visit service center.

When trying to connect realme 1 to miracle it showing usb device not connected, how to solve this? Drivers are installed

Naveen56 said:
Miracle box, SP Flash Tool and MTK Droid Tools no longer work with Realme. If you can access Fastboot then flash stock recovery and proceed further.
Click to expand...
Click to collapse
So bro in case if I brick my phone then I can flash stock rom using stock recovery.......??
Do I get those Rom files from official realme website?

AwesomeVk47 said:
So bro in case if I brick my phone then I can flash stock rom using stock recovery.......??
Do I get those Rom files from official realme website?
Click to expand...
Click to collapse
Yes. Do remember you need both fastboot and recovery to be working, so you can flash Stock Recovery (only if you have TWRP installed).
If you have stock recovery installed then download stock rom from official Realme site and place it in the Sdcard (otg wont help). Enter into recovery and update/install the ozip.
If your phone is completely dead then above method wont help and you have to follow another one.
Note: If your device is rooted then installing (from stock recovery) stock rom fails. At this time flash TWRP from fastboot then flash zip file (convert stock rom from ozip to zip).

Naveen56 said:
Yes. Do remember you need both fastboot and recovery to be working, so you can flash Stock Recovery (only if you have TWRP installed).
If you have stock recovery installed then download stock rom from official Realme site and place it in the Sdcard (otg wont help). Enter into recovery and update/install the ozip.
If your phone is completely dead then above method wont help and you have to follow another one.
Note: If your device is rooted then installing (from stock recovery) stock rom fails. At this time flash TWRP from fastboot then flash zip file (convert stock rom from ozip to zip).
Click to expand...
Click to collapse
Sorry to bother you bro but let's say I bricked my phone and have twrp installed......where will I get the stock recovery from and how to enter the fastboot mode of realme phone if it's bricked

AwesomeVk47 said:
Sorry to bother you bro but let's say I bricked my phone and have twrp installed......where will I get the stock recovery from and how to enter the fastboot mode of realme phone if it's bricked
Click to expand...
Click to collapse
Download stock recovery.
Enter fastboot mode using Power + Volume Down. If that does not work use other combinations.
Now flash stock recovery.
Enter recovery using
Code:
fastboot oem reboot-recovery
Install ozip.

Naveen56 said:
Download stock recovery.
Enter fastboot mode using Power + Volume Down. If that does not work use other combinations.
Now flash stock recovery.
Enter recovery using
Install ozip.
Click to expand...
Click to collapse
Is that link for realme 1 stock recovery?.......it would be great help if you could tell me how to obtain it....just for future use
---------- Post added at 03:18 PM ---------- Previous post was at 03:07 PM ----------
Naveen56 said:
Download stock recovery.
Enter fastboot mode using Power + Volume Down. If that does not work use other combinations.
Now flash stock recovery.
Enter recovery using
Install ozip.
Click to expand...
Click to collapse
Will this link work for stock rom file?
Link1
https://www.realme.com/in/support/software-update
Link2
https://www.getdroidtips.com/oppo-realme-1-stock-firmware-collections/
Which one of these should I use?

Bricked my OP 7 Pro

Please help
I bricked my OP7 Pro , i unlocked it , and install recovery normally
then i tried to install Havac OS , and when i am in TWRP , i did restart to recovery , but the phone stuck in fastboot
what i did so far , i installed fastboot rom 10.0 , do flash all.bat but it keep stuck on fastboot
i am not sure on what version of OS i was.
can any one help me ?

You should be able to recover from this by using the MSM tool. Download that and make sure you follow instructions on installing the correct USB driver. You'll boot the phone with VolUP/VolDN pressed while you connect the phone to a computer and the MSM tool should be able to wipe and put software back on.

fastboot versions are beta's. Check these links.
https://forum.xda-developers.com/oneplus-7-pro/how-to/guide-mega-unbrick-guide-hard-bricked-t3934659
Use this link for Root tools.
https://forum.xda-developers.com/on...pro-roms-kernels-recoverys-firmwares-t3931126
Downgrade tool if you're not happy on Q.
https://techbeasts.com/downgrade-android-q-dp-to-android-pie-on-oneplus-7-pro/

blas4me said:
fastboot versions are beta's. Check these links.
https://forum.xda-developers.com/oneplus-7-pro/how-to/guide-mega-unbrick-guide-hard-bricked-t3934659
Use this link for Root tools.
https://forum.xda-developers.com/on...pro-roms-kernels-recoverys-firmwares-t3931126
Downgrade tool if you're not happy on Q.
https://techbeasts.com/downgrade-android-q-dp-to-android-pie-on-oneplus-7-pro/
Click to expand...
Click to collapse
Nic2112 said:
You should be able to recover from this by using the MSM tool. Download that and make sure you follow instructions on installing the correct USB driver. You'll boot the phone with VolUP/VolDN pressed while you connect the phone to a computer and the MSM tool should be able to wipe and put software back on.
Click to expand...
Click to collapse
Thanks , From where i can download MSM tool ? can you help me to find the thread ?
also what the steps please ? i am newbie

fixed ,
i followed this link
https://forum.xda-developers.com/oneplus-7-pro/how-to/msm-tool-guac-t3934691

new_world_2006 said:
fixed ,
i followed this link
https://forum.xda-developers.com/oneplus-7-pro/how-to/msm-tool-guac-t3934691
Click to expand...
Click to collapse
it's all the same crew.

Bricked Ulefone Armor 8 Pro

Hi everyone, I tried to flash a patched Magisk boot image on my Ulefone Armor 8 Pro via fastboot but the device is now stuck in bootloop. I have already read some threads about trying to flash the stock firmware using the proprietary SP Flash Tool, but the phone doesn't remain in download mode for more than a few seconds. I can't even boot in recovery/fastboot mode again to try to flash the stock boot image since the phone just keeps rebooting. If someone could give me a hint it would be really appreciated.

stwm25 said:
Hi everyone, I tried to flash a patched Magisk boot image on my Ulefone Armor 8 Pro via fastboot but the device is now stuck in bootloop. I have already read some threads about trying to flash the stock firmware using the proprietary SP Flash Tool, but the phone doesn't remain in download mode for more than a few seconds. I can't even boot in recovery/fastboot mode again to try to flash the stock boot image since the phone just keeps rebooting. If someone could give me a hint it would be really appreciated.
Click to expand...
Click to collapse
You need write the model of device.
Currently I know of 3 models: 4GB RAM(Armor 8); 6&8GB RAM(Armor 8 Pro).
So with the correct stock ROM you can flash the device.
To use SPFT you need to specify which OS you have: Linux; Win7_8_10; other
This is to know if you actually installed the USB MTK drivers correctly and if further action is needed.
Also, write if you have the device with the bootloader locked or unlocked.
I have the 6GB RAM and have downloaded a time ago the GQ3090RH3_KSX70H_Ulefone_20210902_V01(Non-EU).zip file aka stock ROM. That's aka Non_EEA model. In the Ulefone site have SP_MDT_exe_v3.2048.02.00(Client).zip aka flash tool.
You used that tool?

Thanks for the reply. I have the model with 6GB of RAM as well and I am currently trying to recover my phone by using Windows 11 in a virtual machine. The bootloader is unlocked and I tried to flash the EU version of the stock ROM (GQ3090RH3_KSX70H_Ulefone_EEA_20210902_V01(EU).zip) by using SP_MDT_exe_v3.2048.02.00(Client).zip (after installing the required drivers), but as I have already specified I can't boot in download mode for more than a few seconds. My computer recognises the device as "MediaTek MT65xx Preloader" but the phone immediately reboots and I am not able to flash the stock ROM.

stwm25 said:
Thanks for the reply. I have the model with 6GB of RAM as well and I am currently trying to recover my phone by using Windows 11 in a virtual machine. The bootloader is unlocked and I tried to flash the EU version of the stock ROM (GQ3090RH3_KSX70H_Ulefone_EEA_20210902_V01(EU).zip) by using SP_MDT_exe_v3.2048.02.00(Client).zip (after installing the required drivers), but as I have already specified I can't boot in download mode for more than a few seconds. My computer recognises the device as "MediaTek MT65xx Preloader" but the phone immediately reboots and I am not able to flash the stock ROM.
Click to expand...
Click to collapse
Win11 is not good to use SP tool.
Maybe using Win10?!
"MediaTek MT65xx Preloader" is normal but need installing drivers correctly. You can try this: Driver_Auto_Installer_EXE_v5.1632.00.zip - 8.8MB
Reboot VM and try with the device turned off!
For using SPFT or SP_MDT your device not need in the bootloader mode. Device turned off - conect USB - look about USB PORT COM - Scan - Start All
If you not know how to do so Read Upgrade software guide for factory assembly line.pdf
Here file and more about: Upgrade tools and USB driver - Armor 8 Pro
___________________________
UP: Maybe SP need more than you know.
I used the SPFT and worked good to me with Win10.
May be SPFT can help more than SP: SP_Flash_Tool_v5.2124_Win
For using SPFT your device not need in the bootloader mode. Device turned off - open sxcatter file - look for Download Only option (NOT use FORMAT+....!!!!) - now with the device turned off conect USB - press DOWNLOAD (Ctrl + D).

Well, you saved my phone. Thanks for the help, I really appreciate that. I installed Windows 10 and the drivers you linked me and via SP Flash Tool I managed to flash the stock ROM after connecting the device with a USB cable. Thanks again.

How do I get this phone into download mode? Cannot seem to get it to flash

I've followed your tips but I cannot get the phone recognized by the flash tool.
I've collected full details here: https://android.stackexchange.com/questions/248035/bootloop-in-ulefone-armor-8-pro

Can SPFT be used with Linux?

jlbradl said:
How do I get this phone into download mode? Cannot seem to get it to flash
Click to expand...
Click to collapse
I know the fastboot mode. It is entered by pressiong Volume + and power button simultaneously.

stwm25 said:
Thanks for the reply. I have the model with 6GB of RAM as well and I am currently trying to recover my phone by using Windows 11 in a virtual machine. The bootloader is unlocked and I tried to flash the EU version of the stock ROM (GQ3090RH3_KSX70H_Ulefone_EEA_20210902_V01(EU).zip) by using SP_MDT_exe_v3.2048.02.00(Client).zip (after installing the required drivers), but as I have already specified I can't boot in download mode for more than a few seconds. My computer recognises the device as "MediaTek MT65xx Preloader" but the phone immediately reboots and I am not able to flash the stock ROM.
Click to expand...
Click to collapse
did you fix your phone?

Alex76rod said:
did you fix your phone?
Click to expand...
Click to collapse
i have the same problem.
it wont stay turn off
so the sp tool can't flash it.