is it posible? to be done or not - General Questions and Answers

i have a samsung
Model: SM-A320FL
AP: A320FLXXS5CSL5
CSC: A320FLXEO5CSL3
CP: A320FLXXS5CSK1
Country: XEO
DAP 8.0.0/R16NW/A320FLXXS5CSL5
i have try everything to bypass the frp google (even tenoshare)any thing that i could find on internet and even if i can get inside the phone and i follow the instructions ,when i reboot the google verification system with the email(that mail i have forgot is to old one) come's up again and again .My question is this. Can i use a custom rom for my phone (upgrade or downgrade)and if i do that will the frp protection bypassed? and if it can be done can you please give me a link for rom and tool to use for that specific model of my phone?(for example odin ver. X.X and rom....)
YG if this post is at wrong area please admins move it in the correct one

New Easy Samsung FRP Bypass Tool Download to FRP Bypass 2020
On this page, you can download Samsung frp tool and APK which can help you to bypass Google account lock from your phone. So, Download the FRP Bypasss tool
www.gadgetsdr.com

jwoegerbauer said:
New Easy Samsung FRP Bypass Tool Download to FRP Bypass 2020
On this page, you can download Samsung frp tool and APK which can help you to bypass Google account lock from your phone. So, Download the FRP Bypasss tool
www.gadgetsdr.com
Click to expand...
Click to collapse
yes but there to many what i download (btw most ofthem i have try it and they dont have the specific version of my phone

Related

Downgrade from 6.0 to 5.1/Remove Google Account Check (FRP Lock) on J700H

I recently buy Samsung Galaxy J7 (2015) from a untrusted source, and when i wipe data, it need to enter the google account, i don't have the account, i've try all solutions on the internet but it don't help me, because OTG cable and SideSync solution are blocked on the new 5.1+ firmware, and i have to install the old 5.1 firmware but my phone is on 6.0, when install the old 5.1 firmware using odin and it said failed and stopped at cm.bin, i read on some forum, blog that because of the update has block downgrade, please help!
flash Custom recovery and stock flasheable man
so fine
seven4grindBR said:
so fine
Click to expand...
Click to collapse
Use Odin ?
Im new to android
p/s: Samsung don't have .zip stock rom, or if it have, please give me the link
~not really good at English
dangquoctrung123 said:
I recently buy Samsung Galaxy J7 (2015) from a untrusted source, and when i wipe data, it need to enter the google account, i don't have the account, i've try all solutions on the internet but it don't me, because OTG cable and SideSync solution are blocked on the new 5.1+ firmware, and i have to install the old 5.1 firmware but my phone is on 6.0, when install the old 5.1 firmware using odin and it said failed and stopped at cm.bin, i read on some , blog that because of the update has block downgrade, please !
Click to expand...
Click to collapse
Brother I have same problem, when I try to install Twrp by Odin it says FRP lock, but I fix this by simply formate mobile without setup google account then I am able to Install TWRP on it.
After that I flash 5.1(Lollipop) by TWRP.
It install successfully but when I sign in again in my google account from my device it gonna turned off.
And when I tried to turn on only model no is display (Not samsung logo) and at the top of the screen there is something like- "custom frp lock" display.
TWRP also not open, I already try some methods but Not working.
Please help me how to fix it?
I'm using J700F/DD I'm not able to bypass FRP lock. Using 6.0.1/MMB29K/J700FXXU2BPH4
I'm using J700F/DD I'm not able to bypass FRP lock. Using 6.0.1/MMB29K/J700FXXU2BPH4

Find out exact firmware version

Hi guys,
I just bought a Samsung Galaxy S7 SM-G930W8 via Ebay but unfortunately it is FRP locked. I know how to bypass the FRP but Android 6.0.1 needs to be installed and as it seems to me Android 7 is installed on it. I downloaded the original 6.0.1 firmware from Samfirmware for the SM-G930W8 but Odin gives a notification "system rev check fail device 1 binary 0". It seems that one gets this notification when trying to install an incorrect original firmware. The problem is that I cannot retrieve any info from the device because of the FRP lock (cannot get into device info).
Is there a way to find out which firmware is installed on it right now so I can download and install the correct 6.0.1 firmware?
try Phone Info Samsung
enrique54 said:
try Phone Info Samsung
Click to expand...
Click to collapse
people need to try start reading posts........
My device is FRP locked
People need to post in the right section to begin with...
sanderh said:
people need to try start reading posts........
My device is FRP locked
Click to expand...
Click to collapse
Easy fix use Odin to downgrade firmware bypass the FRP lock then set phone up to your Gmail etc... Then upgrade I done it before to a FRP locked S7 edge and was pretty easy to do
Sent from my SM-G930F using Tapatalk

FRP Lock after flash firmware Android Oreo 8.0 on S7 (SM-G930F)

Hey guys,
I flash the new firmware of the S7 Flat (SM-G930F) to Android Oreo 8.0.
But what I was forgot its that I need to verify my account after the flashing, unfortunatly i didn't know what was the google account, how can i bypass the frp lock?
I am trying to downgrade but the odin block it because the frp lock.
Someone know how to help me to unlock the frp lock in Samsung Galaxy S7 Flat (SM-G930F) with Android Oreo 8.0?
Please help me, its really really important for me, please!! ?
rifek4 said:
So good... Goodluck
Click to expand...
Click to collapse
Hi
How can i do this??
Im stuck
If you're stuck on FRP lock at boot, you cannot downgrade, you can only flash with same or newer (original) firmware (I discovered it the hard way- tried over 20 firmwares). Download the latest one for your phone, location (CSC) shouldnt matter, try flashing one item at a time (Pit-> Modem -> Bootloader -> System -> CSC)
The pit file can be extracted from the CSC archive.
Once you complete the flash, you should be able to boot the OS and verify your google account. from there, you should know what to do.
Hope this works for you - I spent 2 days trying to bypass FRP (PITA)
I missed the part where you don't know which Google account you used. That's gonna be a tough one...let us know if you figure it out.

How To Remove FRP Lock (Guide)

...............................................................................................................................................................................................................................
STEP 1
...............................................................................................................................................................................................................................
Hey Everyone Its CM-ROMS Here With A Tutorial To Remove FRP Lock This Works With Both 7.0 And 8.0
///////////////////////////////////////////////////////////////////////////////////////////
For 8.0 And 7.0 Follow These Steps And Downloads!
Odin 1.13.1 DONT USE ANY OTHER OR ELSE FAIL! = https://odindownloader.com/download/odin3-v3-13-1
Samsung Usb Drivers (Download Latest) = https://samsungusbdriver.com/
Samsung Drivers = Mod Edit link removed
Now Downlaod FRP Tool = https://mega.nz/#F!4npUXCyA!SztQrf8ciwsvfmiwpShx4A
Download Android 7.0 And Flash It After Combination!
...............................................................................................................................................................................................................................
STEP 1
...............................................................................................................................................................................................................................
If You Have Samsung Galaxy S7 (SM-G930F) On 7.0 Already
If You Have Samsung Galaxy S7 (SM-G930F) On 8.0 Downgrade To 7.0!
For 7.0
Just Download The File Below And Flash With Odin
Do A Clear Data Reboot Device Open Up The FRP Tool Wait For It To Show DEVICEnline
File To Enable ADB = https://drive.google.com/file/d/1wFH7DGAT7neejB6ZGRWbzdzps0gKiaDh/view
Flash Tat File
Now Use FRP Tool The One You Downloaded From The Top!
Wait For Your Device To Get To Setup At This Point DO NOT GO FORWARD
The FRP Tool Shold Be Green.... Now Click Unlock
FOR 8.0
DO ALL ABOVE STEPS AND DOWNLOAD YOUR COMBINATION FILE you can search google for this! :highfive:
Then Downgrade!
...............................................................................................................................................................................................................................
FOR Samsung Galaxy S7 edge (SM-G935F)
...............................................................................................................................................................................................................................
Just Download The File Below And Flash With Odin
Do A Clear Data Reboot Device Open Up The FRP Tool Wait For It To Show DEVICEnline
File To Enable ADB = https://drive.google.com/file/d/1wFH7DGAT7neejB6ZGRWbzdzps0gKiaDh/view
Flash Tat File
Now Use FRP Tool The One You Downloaded From The Top!
Wait For Your Device To Get To Setup At This Point DO NOT GO FORWARD
The FRP Tool Shold Be Green.... Now Click Unlock
FOR 8.0
DO ALL ABOVE STEPS AND DOWNLOAD YOUR COMBINATION FILE http://www.mediafire.com/file/j7asg...635521_REV00_user_mid_noship.tar.md5.zip/file :highfive:
Then Downgrade!
@eriktirador For The Official Combination
its true or not????
thanks op, I hope this works
someone tried?
wotanas said:
someone tried?
Click to expand...
Click to collapse
Seeing as the op has been banned, i would ignore this thread
DSA said:
Seeing as the op has been banned, i would ignore this thread
Click to expand...
Click to collapse
This works
the mega link contain virus
vzttzv said:
the mega link contain virus
Click to expand...
Click to collapse
I tried their is no virus u can't just say its a virus I had an s7 edge frp locked and now its unlocked :good:
i need please u6 or s6 bootable g930f plz plz

Help Google FRP Lock | Samsung Galaxy A3 2017 SM-A320F

Hi Everyone
My brother have a Samsung Galaxy A3 2017 - sm-a320f
I was trying to install new android on it and i didn't know he had a google account on it which can't remember it's address or password.
So now it's frp locked.
The last firmware i flashed on it was A320FOXY8CTI4_SER which is android 8.0
I already tried keyboard copy and Sim pin trick but non work.
Can anyone help me please?
It exists Samsung FRP Unlock Tool. Google for it ...
jwoegerbauer said:
It exists Samsung FRP Unlock Tool. Google for it ...
Click to expand...
Click to collapse
Yes. I've downloaded a few file but the flash always fails. It's a Binary 2.

Categories

Resources