How To Remove FRP Lock (Guide) - Samsung Galaxy S7 Edge Guides, News, & Discussion

...............................................................................................................................................................................................................................
STEP 1
...............................................................................................................................................................................................................................
Hey Everyone Its CM-ROMS Here With A Tutorial To Remove FRP Lock This Works With Both 7.0 And 8.0
///////////////////////////////////////////////////////////////////////////////////////////
For 8.0 And 7.0 Follow These Steps And Downloads!
Odin 1.13.1 DONT USE ANY OTHER OR ELSE FAIL! = https://odindownloader.com/download/odin3-v3-13-1
Samsung Usb Drivers (Download Latest) = https://samsungusbdriver.com/
Samsung Drivers = Mod Edit link removed
Now Downlaod FRP Tool = https://mega.nz/#F!4npUXCyA!SztQrf8ciwsvfmiwpShx4A
Download Android 7.0 And Flash It After Combination!
...............................................................................................................................................................................................................................
STEP 1
...............................................................................................................................................................................................................................
If You Have Samsung Galaxy S7 (SM-G930F) On 7.0 Already
If You Have Samsung Galaxy S7 (SM-G930F) On 8.0 Downgrade To 7.0!
For 7.0
Just Download The File Below And Flash With Odin
Do A Clear Data Reboot Device Open Up The FRP Tool Wait For It To Show DEVICEnline
File To Enable ADB = https://drive.google.com/file/d/1wFH7DGAT7neejB6ZGRWbzdzps0gKiaDh/view
Flash Tat File
Now Use FRP Tool The One You Downloaded From The Top!
Wait For Your Device To Get To Setup At This Point DO NOT GO FORWARD
The FRP Tool Shold Be Green.... Now Click Unlock
FOR 8.0
DO ALL ABOVE STEPS AND DOWNLOAD YOUR COMBINATION FILE you can search google for this! :highfive:
Then Downgrade!
...............................................................................................................................................................................................................................
FOR Samsung Galaxy S7 edge (SM-G935F)
...............................................................................................................................................................................................................................
Just Download The File Below And Flash With Odin
Do A Clear Data Reboot Device Open Up The FRP Tool Wait For It To Show DEVICEnline
File To Enable ADB = https://drive.google.com/file/d/1wFH7DGAT7neejB6ZGRWbzdzps0gKiaDh/view
Flash Tat File
Now Use FRP Tool The One You Downloaded From The Top!
Wait For Your Device To Get To Setup At This Point DO NOT GO FORWARD
The FRP Tool Shold Be Green.... Now Click Unlock
FOR 8.0
DO ALL ABOVE STEPS AND DOWNLOAD YOUR COMBINATION FILE http://www.mediafire.com/file/j7asg...635521_REV00_user_mid_noship.tar.md5.zip/file :highfive:
Then Downgrade!
@eriktirador For The Official Combination

its true or not????

thanks op, I hope this works

someone tried?

wotanas said:
someone tried?
Click to expand...
Click to collapse
Seeing as the op has been banned, i would ignore this thread

DSA said:
Seeing as the op has been banned, i would ignore this thread
Click to expand...
Click to collapse
This works

the mega link contain virus

vzttzv said:
the mega link contain virus
Click to expand...
Click to collapse
I tried their is no virus u can't just say its a virus I had an s7 edge frp locked and now its unlocked :good:

i need please u6 or s6 bootable g930f plz plz

Related

[Completed] Samsung S6 Edge Plus G928F can't flash ERR BIANRAY:0 err

hi
i have samsung g928f edge phone, phone get flashed successfully to latest version 6.0.1 but after giving DRK err, when try to root with kernel or any other root file frp doens't let it to get flashed the file phone only go to download and recovery mode tried also downgrading to 5.1 but due to frp lock i am unable to flash the phone did lots of tires to remove frp with different tool but no luck phone is usless now for me can't flash can't root how to get rid of this problem ? updated to 6.0.1 with odin smart switch but same drk problem comes up
help would be really appreciated
XDA Visitor said:
hi
i have samsung g928f edge phone, phone get flashed successfully to latest version 6.0.1 but after giving DRK err, when try to root with kernel or any other root file frp doens't let it to get flashed the file phone only go to download and recovery mode tried also downgrading to 5.1 but due to frp lock i am unable to flash the phone did lots of tires to remove frp with different tool but no luck phone is usless now for me can't flash can't root how to get rid of this problem ? updated to 6.0.1 with odin smart switch but same drk problem comes up
help would be really appreciated
Click to expand...
Click to collapse
Hi and welcome to XDA.
Your device has a dedicated forum here:
> Samsung Galaxy S6 Edge+ > Galaxy S6 Edge+ Q&A, Help & Troubleshooting
All questions regarding your device belong in the forum linked above. You'll need to create an account first so you can post in the main forums.
Good luck

Find out exact firmware version

Hi guys,
I just bought a Samsung Galaxy S7 SM-G930W8 via Ebay but unfortunately it is FRP locked. I know how to bypass the FRP but Android 6.0.1 needs to be installed and as it seems to me Android 7 is installed on it. I downloaded the original 6.0.1 firmware from Samfirmware for the SM-G930W8 but Odin gives a notification "system rev check fail device 1 binary 0". It seems that one gets this notification when trying to install an incorrect original firmware. The problem is that I cannot retrieve any info from the device because of the FRP lock (cannot get into device info).
Is there a way to find out which firmware is installed on it right now so I can download and install the correct 6.0.1 firmware?
try Phone Info Samsung
enrique54 said:
try Phone Info Samsung
Click to expand...
Click to collapse
people need to try start reading posts........
My device is FRP locked
People need to post in the right section to begin with...
sanderh said:
people need to try start reading posts........
My device is FRP locked
Click to expand...
Click to collapse
Easy fix use Odin to downgrade firmware bypass the FRP lock then set phone up to your Gmail etc... Then upgrade I done it before to a FRP locked S7 edge and was pretty easy to do
Sent from my SM-G930F using Tapatalk

FRP Lock after flash firmware Android Oreo 8.0 on S7 (SM-G930F)

Hey guys,
I flash the new firmware of the S7 Flat (SM-G930F) to Android Oreo 8.0.
But what I was forgot its that I need to verify my account after the flashing, unfortunatly i didn't know what was the google account, how can i bypass the frp lock?
I am trying to downgrade but the odin block it because the frp lock.
Someone know how to help me to unlock the frp lock in Samsung Galaxy S7 Flat (SM-G930F) with Android Oreo 8.0?
Please help me, its really really important for me, please!! ?
rifek4 said:
So good... Goodluck
Click to expand...
Click to collapse
Hi
How can i do this??
Im stuck
If you're stuck on FRP lock at boot, you cannot downgrade, you can only flash with same or newer (original) firmware (I discovered it the hard way- tried over 20 firmwares). Download the latest one for your phone, location (CSC) shouldnt matter, try flashing one item at a time (Pit-> Modem -> Bootloader -> System -> CSC)
The pit file can be extracted from the CSC archive.
Once you complete the flash, you should be able to boot the OS and verify your google account. from there, you should know what to do.
Hope this works for you - I spent 2 days trying to bypass FRP (PITA)
I missed the part where you don't know which Google account you used. That's gonna be a tough one...let us know if you figure it out.

is it posible? to be done or not

i have a samsung
Model: SM-A320FL
AP: A320FLXXS5CSL5
CSC: A320FLXEO5CSL3
CP: A320FLXXS5CSK1
Country: XEO
DAP 8.0.0/R16NW/A320FLXXS5CSL5
i have try everything to bypass the frp google (even tenoshare)any thing that i could find on internet and even if i can get inside the phone and i follow the instructions ,when i reboot the google verification system with the email(that mail i have forgot is to old one) come's up again and again .My question is this. Can i use a custom rom for my phone (upgrade or downgrade)and if i do that will the frp protection bypassed? and if it can be done can you please give me a link for rom and tool to use for that specific model of my phone?(for example odin ver. X.X and rom....)
YG if this post is at wrong area please admins move it in the correct one
New Easy Samsung FRP Bypass Tool Download to FRP Bypass 2020
On this page, you can download Samsung frp tool and APK which can help you to bypass Google account lock from your phone. So, Download the FRP Bypasss tool
www.gadgetsdr.com
jwoegerbauer said:
New Easy Samsung FRP Bypass Tool Download to FRP Bypass 2020
On this page, you can download Samsung frp tool and APK which can help you to bypass Google account lock from your phone. So, Download the FRP Bypasss tool
www.gadgetsdr.com
Click to expand...
Click to collapse
yes but there to many what i download (btw most ofthem i have try it and they dont have the specific version of my phone

New easy way to root ALL Samsung devices 100%

Hello everyone
Here is new method to root all Samsung devices,twrp not needed.
First you need to download EFTSU tool: https://mega.nz/file/34lDEBqB#7mSv2SeYKP2kReheBk7q5AU582TZUdsJy6GL5sd7O-I
Then you need file from this website where you can find for your device and download it : https://eftsu.com/
After you downloaded this file put your samsung device in download mode *need oem unlock* then flash your file with eftsu tool.
Your device will reboot it and it will during boot ask to reset ,then reset it.
When it comes to system you need to download and install eftsu manager: https://mega.nz/file/Oo1yCSiQ#rWlMbcBiBHSzv5oMioyGxQZ0ynxqaeqz_Nfm4ze240c
And you are done.
You can also install root checker to see if it rooted.

			
				
jasmin811 said:
root all Samsung devices
...
*need oem unlock*
Click to expand...
Click to collapse
US/CA Sammys: hmmm...
The rest are rather easy to root with Magisk anyway.
AndyYan said:
US/CA Sammys: hmmm...
The rest are rather easy to root with Magisk anyway.
Click to expand...
Click to collapse
There is more supported devices besides samsung that will work just look at the website above eftsu.com
If there is no device model supported in the list,just tell me an will add it.
if you need any help with it,I can help you.
What I'm looking for is twrp working for M105G,because with M105F is also working but during boot it ask for password,even if i format data in twrp.
I have note10 plus SM-N975U Snap dragon that has the OEM toggle missing and tried everything to make it appear but no luck and without that i can't install anything or unlock the bootloader......Any tools or ideas to overcome my situation?
if no oem in developer option than you have to wait for 7 days .
Hello! I want to root my Samsung Galaxy A01 with firmware A015MUBS3ATL8, I found all the files that I should download, but no way to unlock the bootloader, I did all the guides and when it asks me for confirmation on the bootloader screen to unlock it, I affirm and the phone is formatted and it reboots, but when re-entering the bootloader it is still blocked
Sorry for my bad English, I'm using Google Translate
Please help.
My phone is SM-G955F with Exynos processor. Hungarian XEH code. The latest PIE is running on it. OEM does not allow unlocking. The slider can be turned on, but it also turns off immediately after enabling. What can I do to make OEM resolution work?
Thank you.
jasmin811 said:
Hello everyone
Here is new method to root all Samsung devices,twrp not needed.
First you need to download EFTSU tool: https://mega.nz/file/34lDEBqB#7mSv2SeYKP2kReheBk7q5AU582TZUdsJy6GL5sd7O-I
Then you need file from this website where you can find for your device and download it : https://eftsu.com/
After you downloaded this file put your samsung device in download mode *need oem unlock* then flash your file with eftsu tool.
Your device will reboot it and it will during boot ask to reset ,then reset it.
When it comes to system you need to download and install eftsu manager: https://mega.nz/file/Oo1yCSiQ#rWlMbcBiBHSzv5oMioyGxQZ0ynxqaeqz_Nfm4ze240c
And you are done.
You can also install root checker to see if it rooted.
Click to expand...
Click to collapse
Hi
Samsung Galaxy Note 10+ not supported?
OEM unlock still doesn't work.
bautigarzabal said:
Hello! I want to root my Samsung Galaxy A01 with firmware A015MUBS3ATL8, I found all the files that I should download, but no way to unlock the bootloader, I did all the guides and when it asks me for confirmation on the bootloader screen to unlock it, I affirm and the phone is formatted and it reboots, but when re-entering the bootloader it is still blocked
Sorry for my bad English, I'm using Google Translate
Click to expand...
Click to collapse
you need to ulock developer option in setting-about phone-build info and tap 7 times in it.
Ptreki said:
OEM unlock still doesn't work.
Click to expand...
Click to collapse
activate also usb debbuging
fazi78 said:
Hi
Samsung Galaxy Note 10+ not supported?
Click to expand...
Click to collapse
check if there is file for you model in website
jasmin811 said:
usb debbuging-ot
Nem, nem, nem, nem, nem
I activated it too, but nothing happens.
Click to expand...
Click to collapse
I have a samsung galaxy j4 +
I got it from a friend today.
The phone is after a hard reset (some dumbass did it)
Unfortunately, there is no access to google accounts because the accounts were from her husband and he died.
I keep searching and trying but can't root. Because Debug Usb doesn't go on.
And the computer doesn't read the phone after all.
Yes, I have drivers installed, various Odins, I also took your EFTSU, Fastboot and I do not read my phone anywhere. Nothing else is just loading.
Yup i trying Hard reset many many times...
Jerry3Tears said:
I have a samsung galaxy j4 +
I got it from a friend today.
The phone is after a hard reset (some dumbass did it)
Unfortunately, there is no access to google accounts because the accounts were from her husband and he died.
I keep searching and trying but can't root. Because Debug Usb doesn't go on.
And the computer doesn't read the phone after all.
Yes, I have drivers installed, various Odins, I also took your EFTSU, Fastboot and I do not read my phone anywhere. Nothing else is just loading.
Yup i trying Hard reset many many times...
Click to expand...
Click to collapse
try to frp unlock your phone,you have here on xda tuts how to do it,just search for it.
what do you mean nothing happened?
I can't unlock the OEM with either method.
did you follow the guide i wrote above?
First you need file downloaded from the website and with the eftsu tool flash it in download mode,the when phone is reseted and comes in system install eftsu manager and root checker and in root checker you have to see if it's rooted or not.

Categories

Resources