Hello everyone. i am facing problem of my xiaomi mi note 3 stuck in twrp mode. i still could not quit whenver i try every methods. it was all when i try some zip file or image file in twrp mode. what should i do to get out of this problem? mi flashtool does not work in fastboot mode. Please someone help me.
Edited: Problem solved by flashing stock firmware with twrp.
You should install another system but before installing new system you should wipe everything from twrp wipe / advanced Format / choose everything ( mark ) after that you should download new system on your laptop and put in twrp and flash it after that you will log into your system .
Related
Good Day every one
I really need your urgent help
I have a chinese Mate7 Gold dual SIM that I upgraded it till I reached MT7-TL10C00B357 using OTA
I have unlocked the bootloader and rooted the phone and installed TWRP 2.7.8.0 for lolipop
then I tried to install a middle east update.app by extract the file and make flashable Zip using huawei extractor
after this trial the Phone went to rescue Mode with no access to TWRP Recovery
I have tried the following with No Use
1-Install huawei suite 4 and trying system recovry ...it install the recovery and when installing the system it fails and after that the phone goes back to rescue mode with no access to rcovery
2- I extracted the Cust, Recovery, System, Boot and userdata from the Stock Rom MT7-TL10C00B357 and I flashed them using fast boot flash after putting the phone in fastboot rscue mode... the flash was OK but after the five files were flashed and trying to reboot, the phone goes back to rescue mode
3- trying the same as step 2 and trying to flash the update.app using three buttons flash... the phone stuck at Huawei Ascened Logo and nothing happens
4- trying another Update.app of Android 4.4 and extracting cust,recovery,boot, system and userdata and flash them using fast boot.. flash is ok but rescue mode is still presist
5- I have tried several times to flash TWRP again .. the flash is ok but no access to TWRP only Rescue mode or fastboot rescue mode
6- I tried to change to oeminfo and custom.bin to be eu using Huawei SRK tool 1.8 but I failed
when trying to adb devices the result is empty
I heared from one psot that this might be a problem in the sensor although I dont see a direct relation
so any one could figure out a solution to this problem
I guess I have all the tools necessary but cant find a working solution
Please help me urgently
Sherif Nassif said:
Good Day every one
I really need your urgent help
I have a chinese Mate7 Gold dual SIM that I upgraded it till I reached MT7-TL10C00B357 using OTA
I have unlocked the bootloader and rooted the phone and installed TWRP 2.7.8.0 for lolipop
then I tried to install a middle east update.app by extract the file and make flashable Zip using huawei extractor
after this trial the Phone went to rescue Mode with no access to TWRP Recovery
I have tried the following with No Use
1-Install huawei suite 4 and trying system recovry ...it install the recovery and when installing the system it fails and after that the phone goes back to rescue mode with no access to rcovery
2- I extracted the Cust, Recovery, System, Boot and userdata from the Stock Rom MT7-TL10C00B357 and I flashed them using fast boot flash after putting the phone in fastboot rscue mode... the flash was OK but after the five files were flashed and trying to reboot, the phone goes back to rescue mode
3- trying the same as step 2 and trying to flash the update.app using three buttons flash... the phone stuck at Huawei Ascened Logo and nothing happens
4- trying another Update.app of Android 4.4 and extracting cust,recovery,boot, system and userdata and flash them using fast boot.. flash is ok but rescue mode is still presist
5- I have tried several times to flash TWRP again .. the flash is ok but no access to TWRP only Rescue mode or fastboot rescue mode
6- I tried to change to oeminfo and custom.bin to be eu using Huawei SRK tool 1.8 but I failed
when trying to adb devices the result is empty
I heared from one psot that this might be a problem in the sensor although I dont see a direct relation
so any one could figure out a solution to this problem
I guess I have all the tools necessary but cant find a working solution
Please help me urgently
Click to expand...
Click to collapse
I had tried all the methods in the globe to flash the 4 files cust,recovery,system..etc and nothing happened
till I got this program from another thread the program called DC Pheonix
the advantage of this program is that you can flash all the image files of any update.app while if you try to flash for example sensorhub.img using fastboot , you will get a message that command not allowed
so install the program and buy a 15 Euoro credit and flash the original last ROM that was on the phone
I could not wait till the morning I downloaded Phoenix DC and bought 15 credits = 15 Euoros and flashed the original update.app which was the chinese version MT7-TL10C00B357
The phone is working well nowwwwwwwwwwwwwwww Yupeeeeeeeeeeeeeeeeeeeee
I am so Happy
Happened to me before, sounds wierd but actually , I thought it's a hard problrm to solve and that actually made me solve it after working for 8 hours and the solution simply was reboot in fastboot and rescue mode will be Rescue&fastboot mode , then flash
Sent from my JAZZ using Tapatalk
hello,
i tried to install custom rom on bobarry k10se tablet (chinese tablet) has mediatake processor.
1) I wrongly did boot recovery with twrp image file with flashify mobile apk-- its showing bootloop only
2) then at recovery mode I tried to do wipe data and then wipe partion then I tried to install rom from sdcard but it shows - installation aborted.
3) at last i did back up & restore in recovery mode.. god.. its stuck to the flashing green robot screen and wont do anything else.
Please help me what should I do now, after starting the tablet it shows green flashing robot with written "installing system update" and nothing happnes.
I know I have done lots of mistake and tried to install custom RR 5.8.0 which failed. pls help this frnd.
i tried to flash with sp flash tool with other phones stock rom having same processor mt6580. (format all + download)
first it was installed successfully but tablet is not opening.
so again tried download only but it shows as brom error s_ft_enable_dram_fail (0xfc0).
please help me friends
i think its hard bricked now. its like switched off. if i connect to the pc via usb, there is only connecting-disconnecting sound.. nothing else happens.
i used sp flash tool with similar kind of firmware, the result shows- s_ft_unable_dram_fail (4032).
pls help me
Hi !
I see that you posted again here https://forum.xda-developers.com/an...rd-bricked-t3548246/post70826170#post70826170
Let`s keep everything in one place
Good luck !
thread closed
Hi....
I was on Chinese Firmware.
I was unlocked bootloader of m2 note.
Then i install twrp recovery( I created backup through twrp recovery ).
Then Flash LineageOS ROM.
Then i restore ( chinese firmware ) from twrp.
I found stock recovery of flyme 5 and I flashed this from Rashr.
Then i try to re-flash same chinese firmware(like normal update from update.zip from file manager).
it successfully upgraded(shown in phone screen), but not booted.
when i try to connect phone to pc, it connect and dis-connect automatically after 1-2 seconds.
i can't flash anything..(when i try to flash recovery, it downloaded in sp flash tool, but not flashed bcoz phone is disconnected.):crying::crying:
if anyone know the solution, plzzz tell me....
Hello
I own a Huawey Y6 SCL-L21 dual sim and last night i try to install a custom rom and problems are:
-First of all i unlocked bootloader and FRP
-Flashed TWRP with Adb
-Download custom rom and gapps and put on sd
-Boot in TWRP and....... wipe my internal storage cache and davlik without make a backup....i know my bad(
-Then i just go to install and try install rom (Cyanogenn 12.1) and after 3 seconds stops and its say this package is for device: y6; this device is Honor4a
"E:Error executing updater binary in zip ' /sdcard/cm-12.1-2016514-UNOFFICIAL-Y6.ZIP' Error flashingzip
-I try all custom roms for my Y6 from XDA and i just get same error for all of them
-Now the real problem is because i didnt make backup befor wipe all data now i just dont have any rom installed on my device and i cant use it
-Now i just want go back at stock rom via update.app firmware downloaded from Huawei and because i have custom recovery TWRP i cant flash it
Please help me replace TWRP with stock recovery because i want install stock rom again.
Sorry for my english i hope u guys can understand me and help.
Thnx in advance.
AndroMen said:
Hello
I own a Huawey Y6 SCL-L21 dual sim and last night i try to install a custom rom and problems are:
-First of all i unlocked bootloader and FRP
-Flashed TWRP with Adb
-Download custom rom and gapps and put on sd
-Boot in TWRP and....... wipe my internal storage cache and davlik without make a backup....i know my bad(
-Then i just go to install and try install rom (Cyanogenn 12.1) and after 3 seconds stops and its say this package is for device: y6; this device is Honor4a
"E:Error executing updater binary in zip ' /sdcard/cm-12.1-2016514-UNOFFICIAL-Y6.ZIP' Error flashingzip
-I try all custom roms for my Y6 from XDA and i just get same error for all of them
-Now the real problem is because i didnt make backup befor wipe all data now i just dont have any rom installed on my device and i cant use it
-Now i just want go back at stock rom via update.app firmware downloaded from Huawei and because i have custom recovery TWRP i cant flash it
Please help me replace TWRP with stock recovery because i want install stock rom again.
Sorry for my english i hope u guys can understand me and help.
Thnx in advance.
Click to expand...
Click to collapse
Bro , Download Stock Rom For Your Model . Then extract recovery image file using Huawei Update Extractor Tool
And follow the same steps for flashing stock recovery as you flashed the TWRP recovery
SmartDrevil said:
Bro , Download Stock Rom For Your Model . Then extract recovery image file using Huawei Update Extractor Tool
And follow the same steps for flashing stock recovery as you flashed the TWRP recovery
Click to expand...
Click to collapse
Thnx m8.
Btw i figured out how to flash Huawei stock recovery and then update.app.
Phone it's just like new out of box:laugh::laugh::laugh:
Hi there
My phone is Realme 5 pro (4 GB RAM)
I've tried to flash Pixel Experience Plus ROM (Android 12), so I got into their website, and followed the instructions (including that: they put a link to a custom recovery, I guess it's TWRP, but when I hit the link, it said: Error, Not found! Or something like that.. Then I installed the TWRP from an external website and flashed it, then flashed the ROM without problems facing me)
But after the process and hitting "Reboot system" , the phone is stuck on fastboot mode and doesn't proceed to the system normally!!
I tried the process with: TWRP, and OrangeFox 12.1, and PE recovery that's attached to the A12 ROM at their website! And the same happened every time!
In addition, when I tried to flash the PE custom recovery itself, the phone also is stuck on fastboot mode, even if I tried to get into recovery mode!! It doesn't get into the recovery mode, but reboot again to fastboot mode!! As if I didn't flash the PE custom recovery!!
Any explanation and help please?!