Hello everybody, my niece forgot the lock screen pattern of her Alcatel A2XL and i'm looking for a way to bypass/remove it or at least be able to retrieve all the photos on the smartphone.
The problem is (i think) the smartphone is not rooted and doesn't have USB debugging enabled, thus ADB (from pc) doesn't show devices and i can't find a way to flash TWRP or CWM on it. I also tried to flash the recovery with "SP flash tool" but when i press Download, nothing happens, the download just doesn't start.
I tried the method suggested on another topic where you press (and keep pressed) Volume+ key and connect the phone to the pc but it still refuses to download.
Can someone suggests me a way to resolve my issue please? I'd really appreciate.
Thanks and merry christmas
I solved my issue by doing a backup of the user data with the official Alcatel recovery and then extracting and cracking the gesture.key file.
Thanks anyway
good job bro and nice info
Related
I stated to update ROM but unfortunately unplugged the cable with mistake.
Now my JAM is showing only black Screen with Text USB V1.02 . What i should do now, After rebooting many time, nothing happend, same screen.
Please help
You need to flash it again:
- fully charge your magician ( remove battery cover and plug in the charger )
- after you start your magician in bootloader ( You press power button + camera, and hit reset with stylus )
- download the rom u want ( magician wiki has loads of them and dont forget to disable USB Connections on Active Sync )
- and use matupgradenoid if you have country id error.
Rom Update Problem
Hi,
Thanks for Writing me.
I repeated all the step you sent me.
I rebooted the device and it shows USB Boot Sceen.
I downloaded ROM from clubimate.com and tried to install.
but its not working. its says unable to connect device.
Attached is the error screenshot. Please help
Hmm, can u fully upgrade your rom ?
Hi
I have the same problem.
When i try to load the rom, the device "boot" and stay in blank screen!
I tried what was sugested, bu t with no luck!
I ideias,
Thanks
Nuno Cancelo
I had a similar problem. I tried to flash the ext ROM with NZ Vodaphone and it didn't finish. The Phone would boot then hard reset. I tried to reflash with the ROM file from PC but it keep failing. Luckily I have a spare Jam. I dump the ROM of the old phone and reflashed it to the broken one. To dump the ROM of a good Imate Jam goto http://forum.xda-developers.com/showthread.php?t=230151
Once you have done this, Reboot your phone into the ROM flash menu with the SDCARD that you used from the good phone into yours.
I think from there it sees the ROM files and gives you options to reflash.
Good luck.
Hi everyone!
I need, please help with a Chinese phone I just bought.
Some information about the phone:
MC603CH, board cellonsz73_gb, MT6573 ARMv6 797.90mhz, MC7305.zheng.V1.en display, brand Yusu, total 214 Mb RAM, 130 Mb internal space, external 3.7 Gb, Imagination Technologies GPU, OpenGL ES 2.0, currently running Android 2.3. 5 Kernel 2.6.35.7.
In Windows 8 on Mac and was recognized as HTC (Windows as My HTC). Turns out I can not stand just looking for that kind of device without having the urge to start moving in everything and in every way (especially since it's my first Android). I did root, installed a bunch of app to change the system and found a script that makes the Apps recognize a partition EXT4 like to have more internal space to install applications. The last two things I did while he was connected were able to install BusyBox to make the system recognize the init.de folder so I can run scripts in the beginning of the section and, silly me, make a run in the script.
He was pretty one, running everything is fast with the ROM that was running, which it came (modified to look like iOS), but after running the script, it restarted and went into boot loop. Then I try to recover the poor, and went hunting for information ... flash rom did (I was afraid to try installing and kill him at once), then I found a video that said I could try clearing the cache, I tried, I removed the USB cable from the computer to wait for the battery dies (it does not restart the button is in loop) and nothing.
I found another video that told me to go back to factory settings purchases that could go right.
The problem is I can not get into recovery mode by buttons (already tried all possible combinations and does not enter the recovery). I managed, after Google searches, and find the adb installed, managed to make it into the recovery by adb! Then I thought I could do everything that was needed to revive the pet. I fell to the tale of the factory settings, and I gave myself badly. Now the adb condegue not recognize the phone, I believe it is because he is no longer on usb debuging (factory settings), so now I'm here at all in the stirring cell, trying to find a way to disconnect the battery and do not think (believe only a technician can or someone with technical knowledge) so I can try some procedures using software I found (SP flash tools, tools mtkdroid, Android AIO flasher, etc.). To get drivers that worked in Portcom has been very difficult, I tried several until you find what the Windows install left. Well, it's more or less what is happening to me. I hope you can find someone to help me on this, because, as I said, it's my first android and I can not buy another one for a long time (I have a wife and four children, i can not spend too much ) and it cost me R$ 590.00 (Brazil) and not just pay. If anyone can help me, I am very grateful.
God bless you. Sorry for english from Google Translator.
Hej,
If you just can get into the recovery you could flash any rom made for your phone, just get the zip on your SD card and install through recovery.
Try to get into recovery through fastboot if your phone is supported and next time you root your android just do a nandroid backup.
dR.BaNaNe said:
Hej,
If you just can get into the recovery you could flash any rom made for your phone, just get the zip on your SD card and install through recovery.
Try to get into recovery through fastboot if your phone is supported and next time you root your android just do a nandroid backup.
Click to expand...
Click to collapse
Hi Dr.Banane! Thanks for responding!
The point is that I can not go into recovery mode at all the buttons on this phone.
The only ways in which I saw the screen of recovery mode this cell were: 1 by 2 by adb root manager when
I was with usb debugging enabled. I need to figure out exactly how to enter the recovery mode, because I think it
I will be able to access adb again and be able to delete the folder init.d script or do some flash ROM.
By the way, does the ROM Sophone MT6575 will work on it or kill it once?
Thank you. God bless you.
learned alot from your question
Wppley said:
Hi Dr.Banane! Thanks for responding!
The point is that I can not go into recovery mode at all the buttons on this phone.
The only ways in which I saw the screen of recovery mode this cell were: 1 by 2 by adb root manager when
I was with usb debugging enabled. I need to figure out exactly how to enter the recovery mode, because I think it
I will be able to access adb again and be able to delete the folder init.d script or do some flash ROM.
By the way, does the ROM Sophone MT6575 will work on it or kill it once?
Thank you. God bless you.
Click to expand...
Click to collapse
Look at this and maybe it will help you:
http://forum.xda-developers.com/showthread.php?t=1929957
You have to flash a recovery.img and boot.img with computer but i don´t know if it´s possible without USB-debugging OFF, but atleast you can try.
dR.BaNaNe said:
Look at this and maybe it will help you:
http://forum.xda-developers.com/showthread.php?t=1929957
You have to flash a recovery.img and boot.img with computer but i don´t know if it´s possible without USB-debugging OFF, but atleast you can try.
Click to expand...
Click to collapse
Ok, thanks Dr. I will try this.
Please tell me someone knows a way to get into recovery mode?
Edit: I think i found the model of my phone: Sophone 4s v5 or Gooapple v5, I'm not sure.
Thanks.
God bless you.
Sorry for flood, but anybody can help me please? Think i loose my recovery. What can i do? Please!
Thanks,
Edit 16 02 13: I have in my hands another one cell ecxately same of mine, but im not able to get a backup of their rom, please help me, im almost in the goal!
Thanks. God bless you.
Edit 17 02 13: I would like to thank Dr. Banane and all the help that friends here from XDA have done to help me.
Thank God I managed to grab the rom from a device identical to mine and restore my Android. I learned a lot in those days I tried and tried and could help in forums with this topic: http://forum.xda-developers.com/showthread.php?t=1683883.
dear friend
i have y511-u30...unfortunately i wipe system partition and my phone hang on start and i have not access to recovery or anything.i found a article about flash phone with sp flash tools and i did it but now my phone do not turn on at all and in sp flash tools not found my phone .in my computer (win7) in device manager for some second comes an item : Android usb ethernet/rndis and after seconds gone.please help me with this .i really need my phone.thanks
strix666 said:
dear friend
i have y511-u30...unfortunately i wipe system partition and my phone hang on start and i have not access to recovery or anything.i found a article about flash phone with sp flash tools and i did it but now my phone do not turn on at all and in sp flash tools not found my phone .in my computer (win7) in device manager for some second comes an item : Android usb ethernet/rndis and after seconds gone.please help me with this .i really need my phone.thanks
Click to expand...
Click to collapse
hello strix666 unfortunately your problem may not be fixed for some causes :
1. your phone is a low quality phone (sorry for saying that)
2.before huawei created the phone some documents leaked and many companies created clones with much lower quality
3. this is a common problem with this model of huawei phone so don't be surprised if it has gone BRICKED without anything
and i wanted to know what were you doing with the phone (with details) before that happens and did you try to had reset it?
paywand said:
hello strix666 unfortunately your problem may not be fixed for some causes :
1. your phone is a low quality phone (sorry for saying that)
2.before huawei created the phone some documents leaked and many companies created clones with much lower quality
3. this is a common problem with this model of huawei phone so don't be surprised if it has gone BRICKED without anything
and i wanted to know what were you doing with the phone (with details) before that happens and did you try to had reset it?
Click to expand...
Click to collapse
Dear sulaimaniyah,
thank you and i appreciated for honest answer, i instal a recovery that support touch and have so many features (recovery_TWRP_2.6.3.0) . i go to wipe section and wipe system partition.after restart phone my phone just stay on the logo huawei and do nothing.i try to flash my phone with SP flash tools but after 2time failed in process (i think because of wrong files that i chosen) .that logo doesn't show and my phone doesn't turn on and show nothing .in my computer in device manager comes an item with name Android Usb Ethernet/rndis but with yellow mark and i try so many drivers but still nothing.and for hard reset i have not access to any function.
strix666 said:
Dear sulaimaniyah,
thank you and i appreciated for honest answer, i instal a recovery that support touch and have so many features (recovery_TWRP_2.6.3.0) . i go to wipe section and wipe system partition.after restart phone my phone just stay on the logo huawei and do nothing.i try to flash my phone with SP flash tools but after 2time failed in process (i think because of wrong files that i chosen) .that logo doesn't show and my phone doesn't turn on and show nothing .in my computer in device manager comes an item with name Android Usb Ethernet/rndis but with yellow mark and i try so many drivers but still nothing.and for hard reset i have not access to any function.
Click to expand...
Click to collapse
dear strix666
i'm very sorry but the (recovery_TWRP_2.6.3.0) is a recovery used for lenovo phones specially lenovo p780 and as the most common results there are 3 things that happen :-
1. the phone gets bricked possibility : %70 (your current phone situation)
2. the phone gets stuck in a boot loop possibility : %22 ( thats what happened to your phone at the first flash )
3. the phone stays safe and nothing happens possibility : %8 ( impossible )
and so after you tried to fix it by flashing it 2 times again it is commonly bricked which can't be fixed easily and the only way to fix it is by using apps similar to odin.
but before that i need to need know some other details :-
1. does it charge or show the charging icon?
2. try to hold the volume down and power key for about 15 seconds anything happened?
3. connect it to your pc and go to | start menu > devices and printer > right click your device > troubleshoot
and if it doesn't appear please tell me.
by the way my name is paywand and sulaimaniyah is my city
Hi guys, i'm desperately writing this thread after asking for help in the Oppo Community forum without no luck.
I know that this is for R7 Plus but i hope that someone could help me with my beloved R7s.
Months ago i've succefully installed the Project Spectrum ROM and it worked fine until few weeks ago when i noticed a random system slow down, maybe after an automatic app update.
I tryed to uninstall few apps and reboot the phone several times but with no luck.
So i decided to wipe it and reinstall the Color OS following the walkthrough but something went wrong and now my OPPO R7s is in a strange bootloop without recovery and fastboot.
The strange things are these:
- if I press the power button all I can see is the OPPO Logo and the loading dots in slow-mo
- if i connect it directly to a Windows PC it is recognized as a generic "Android" terminal.
- if i connect it to a Windows PC pressing and holding POWER + VOLUME DOWN + VOLUME UP it's recognized as a QHSUSB_BULK
I'm not a noob, neither an engineer, but i've a bit of familiarity with computers and similar things so i've tried to follow this guide:
http://community.oppo.com/en/forum.php?mod=viewthread&tid=48654
Downloading this service repair rom : https://drive.google.com/file/d/0BybDE_sPI3b5cmgtU05fbXNobVU/view (from this related discussion : http://forum.xda-developers.com/r7-plus/help/r7s-service-romqpst-unbrick-t3493377)
Following the guide, when i try to execute MSM8x39Downloadtool.exe selecting the phone model (i've three choices xx080_32G, xx081_32G, xx082_32G - and i don't know which one is the correct one) the phone is not recognized as COM CONNECTED in none of the ports. If I also do the verification, clicking on the top right button, it shows FAILED on system.img file.
Can that be the problem?
I'm stuck guys and i don't know what to do.
Any help will be better then a christmas present
Thanks in advance!!
A.
Download this rom and place it in the internal sd and flash to downgrade from spectrum
https://s3.amazonaws.com/public.opp...d_ColorOS/Specified_ColorOS_R7sf_full_009.zip
kishd said:
Download this rom and place it in the internal sd and flash to downgrade from spectrum
https://s3.amazonaws.com/public.opp...d_ColorOS/Specified_ColorOS_R7sf_full_009.zip
Click to expand...
Click to collapse
Thanks kishd i'll give this a try!
The only thing i'm bit worried about is how to flash from the internal sd without recovery mode and fastboot...
I'll keep you updated!:good:
any news?did you manage to fix?
hello guys
i have a problem with my oppo RS7
it has a hard bricked and stucked on booting and booting..... I only have a MacBook Pro and not windows
is anyone over there that knows exactly how to unbrick it using a Mac ?!
Hi everyone, recently i did een OTA update on my z7, but now is doesn't leave the zte recovery. At first i couldn't connect it to my laptop, because the laptopt did not recognize it, didn't find it. Now i managed to get fastboot running (at least that is what i think, i pressed power and both volume rockers at the same time and i heard my laptop reacting) and i can only find 1 folder, named image.
Inside is a list of things that i do not know. First a list of adsp.b01 files, then cmnlib.b01 and more.
And that is it.
When i use the recovery in the Phone, i can look around, there are more files there, but i can not install anything. I tried to use u usbstick as a way to install something, but it is not seen or recognised by the Phone.
I am not an android expert, i managed to use twrp, cyanogenmod recovery etc to install a custom rom on my xiaomi and asus tablet, but for those there are multiple howto's. I am not so familiar with it to figuere this one out. On the z7 there is almost no info or howto's to find
Can anybody help me? Thank you!
Lars