Hello everyone, I have a problem with my P30 ELE-L29 with Emui 10.1.0.171, my car does not recognize the phone, when I connect usb cable, so android auto does not start. I remember that months ago I tried to connect my phone, and it works, but I was on Emui 10, so I suspect that Emui 10.1 broke my connection in some way. Could someone confirm that Android Auto works on Emui 10.1? If the answer is yes, what could be the problem? Thank you in advance.
I have same problem but in 10.1.0.191 , I found that the problem is the cable, if u use the original cable always works fine;
But before this update, I used short cables with my car without problem, and If I try with a Samsung with any cable always goes well Android Auto.
Its very strange.... I dont understand why this happen! Have u tried with original cable ?
Related
I have a MTCD head unit MX (witson) with Android 5.1, my problem is that the USB port cannot recognize my phones, A note 4 with Android 6.0 (eRobot ROM) and a Samsung GT386T no rooted with stock ROM 4.4.2. The USB port works find with a usb stick, I can play music, pictures, etc. but not my phones. Both have the USB debugging enable.
When I plug a phone it is charging but nothing happens, my note 4 after a few minutes pop a windows saying that there is a problem with the connection MTP and that I need to download samsung Sync etc.
What I want to do is to use the mirror link function.
Any of you know something about this issue?
Thanks in advance for your help.
paniqueado said:
I have a MTCD head unit MX (witson) with Android 5.1, my problem is that the USB port cannot recognize my phones, A note 4 with Android 6.0 (eRobot ROM) and a Samsung GT386T no rooted with stock ROM 4.4.2. The USB port works find with a usb stick, I can play music, pictures, etc. but not my phones. Both have the USB debugging enable.
When I plug a phone it is charging but nothing happens, my note 4 after a few minutes pop a windows saying that there is a problem with the connection MTP and that I need to download samsung Sync etc.
What I want to do is to use the mirror link function.
Any of you know something about this issue?
Thanks in advance for your help.
Click to expand...
Click to collapse
I believe i read that there is a specific app that you have to run on these to do the mirror link...easy connect, maybe? Did your HU come with an instruction booklet? I was looking through mine earlier and it went over in detail how to setup mirroring through that app.
Yes, when I tried to use EasyConnected is when I saw the problem. The app waits for my phone to be connected, It says that it must be turned on USB debugging, but it is on. Then I checked in the File manager and the USB was not enable there, like if nothing is plug it. If I plug a USB memory it works fine.
I will try today to do a factory reset.
Thank you!
paniqueado said:
Yes, when I tried to use EasyConnected is when I saw the problem. The app waits for my phone to be connected, It says that it must be turned on USB debugging, but it is on. Then I checked in the File manager and the USB was not enable there, like if nothing is plug it. If I plug a USB memory it works fine.
I will try today to do a factory reset.
Thank you!
Click to expand...
Click to collapse
You ever get this solved? My easyconnected never stays connected. WiFi and USB both are garbage.
WiFi randomly disconnects.
USB also disconnects asks me to allow USB debugging every couple of minutes. The phone never remembers the headunit, so it constantly asks me again to allow connection. Must be a crap RSA fingerprint coming from the headunit.
JordanB said:
You ever get this solved? My easyconnected never stays connected. WiFi and USB both are garbage.
WiFi randomly disconnects.
USB also disconnects asks me to allow USB debugging every couple of minutes. The phone never remembers the headunit, so it constantly asks me again to allow connection. Must be a crap RSA fingerprint coming from the headunit.
Click to expand...
Click to collapse
Nope, Still does not work for me. Same symptoms as you. I already tried with 3 differents phones, factory reset and different versions of easyconnected.
I seem to have USB connection working now with only one "allow USB Debugging?" popup, only when I first connect.
What I did was turn wifi off on the headunit. I am not sure why it worked, but I just wanted to turn everything not needed off, and see if the headunit would stop disconnecting all the time. So far so good. I can probably live with one annoying popup, instead of one every few minutes.
Of course you have to keep the screen on the phone on, and the battery in the phone will deplete faster than the headunit charges it, but still an improvement. I had a 30 minute drive today, and the USB never disconnected!
paniqueado said:
Nope, Still does not work for me. Same symptoms as you. I already tried with 3 differents phones, factory reset and different versions of easyconnected.
Click to expand...
Click to collapse
paniqueado, try the da_anton ROM. I just installed it and easyconnect finally works as it should. I just plug in my phone to the USB and it fires right up! One prompt if any on the head unit, and NO disconnects whatsoever.
I'm on xiaomi EU on the latest update and Android auto doesn't work.
Someone know if it can be a Rom problem or just a phone problem?
I connect it but my new vw t-roc don't Detect anything.
Any solution?
Thanks and sorry for my bad English
You do not say HOW you connect your Xiaomi to your VW.
I have my Xiaomi working with Android Auto just fine (Global ROM), but on a Mazda.
To be sure: you have connected the phone by BOTH Bluetooth and USB? Your USB cable needs to be DATA as well as Power (4 wires NOT 2). Use the original Xiaomi data cable!
Sorry for my bad kidneys.
Yes obviously both, with usb and Bluetooth.
Maybe can be a problem of xiaomi.eu?
Now I don't have the cable with me, I'll try when I get back home and I let you know if it works.
Thanks for the answer
Now work
Ok, I change the cable and everything work perfectly.
Hello,
I've recently bought a Realme 5 Pro, but the android auto is unable to communicate with my car.
I've already tried to enable usb debug (as required with some huawei devices) but I was unable to get it working.
Any feedback? Does your device connect your car?
CyberPK said:
Hello,
I've recently bought a Realme 5 Pro, but the android auto is unable to communicate with my car.
I've already tried to enable usb debug (as required with some huawei devices) but I was unable to get it working.
Any feedback? Does your device connect your car?
Click to expand...
Click to collapse
Have you opened a ticket in the Realme Community ?
Today started working.
I've use an original cable from Samsung, but I don't know if the problem was the cable or something else
Today started working.
I've use an original cable from Samsung, but I don't know if the problem was the cable or something else
Good morning connecting my Pocox3 NFC to the car via Usb, a Seat Arona of 2020 does not start Android auto. I think it is a phone problem as I have tried with a Real me X2 pro and everything works.
I read on other forums I have heard about the problem of cloned apps but I don't have any. Equal is more a problem of MIUI 12 .. I don't know ... can you help me !? thanks
for me in an audi a3 (which should be similar to arona regarding software) 2018 it works perfectly :S (using cable, not wifi)
Try removing second space and enabling usb debug
no I have already tried to delete the second space and enable usb debugging but on my Poco x3 there is nothing to do it does not start
Hi All!
I need some help.
I have an android head unit in my car, with an android auto adapter on it for more than 1,5 years, and it has worked perfectly fine before. Yesterday i pluged my phone (galaxy note 9) on the adapter and it rebooted my phone again and again, after i tryed with an other phone (galaxy A41), it was working.
Today it doesn't work with the A41 eather, it made the same issue, constantly restarted the phone.
What do you think, what could be the problem.
Thank you the answers in advance.
Daniel
I have the same issue now after the latest update for Android Auto.
Very good I also have the same problem, I have been using android auto for more than a year without problems, I use a huawei Mate 20 pro phone and a CarlinKit unit. Try with a Xiaomi Note 9 pro and it also reboots automatically when connecting the phone. But with a Xiaomi Mi A1 it works perfectly.
The mirrorlink mode works perfectly so I discard the drive and cable.
Problem solved!!
You need to delete the Chrome updates, after that reboot your phone, and it will work again.
Yes, uninstall the update and also remove brave that uses the same engine. Thank you very much.