I have Mato G XT1033, just got it yesterday. And I have my old samsung data cable with me. I am using the samsung's one since there is no data cable provided by moto g. today I tried charging my mobile in my office, when I connected my phone to the CPU, its showing "Charging" in the notification bar, but after a minute, I can see in battery settings, it showing as "Not charging" but I can still the charging logo in my battery icon.
There is a restriction policy in my office computer, it wont allow to install device drivers... Moto G is not getting charging because of this limitation in my office PC or any bug in my phone?
Kindly help...Thanks in advance.
I tested on my ubuntu laptop, could charge only when tethering via USB
powersupply from USB too low??
Nope, that is USB cable is working for other phones.. like Samsung, Nokia... in my home its working.. I suspect the limitation in my office is preventing the charging.... I think in order to charge motog, one need to install device drivers also...
Sent from my XT1033 using xda app-developers app
padhu1989 said:
I suspect the limitation in my office is preventing the charging.... I think in order to charge motog, one need to install device drivers also...
Click to expand...
Click to collapse
Sounds incredable.
I've encountered charger/cable combinations that just did not charge the moto, but changing the charger or cable solved it. There should be no need for drivers whatsoever.
I experienced the same issue with MOTO E.
The below solution worked for me.
Once you attach the charger to the PC and the phone the default setting is applied and the phone is connected as Media device.
Swipe down to see the notification center and click on the message that provides the USB connection info.
Change the option to Camera(PTP) and it will start charging the phone.
Hope it works for MOTO G as well.
PSatish said:
I experienced the same issue with MOTO E.
The below solution worked for me.
Once you attach the charger to the PC and the phone the default setting is applied and the phone is connected as Media device.
Swipe down to see the notification center and click on the message that provides the USB connection info.
Change the option to Camera(PTP) and it will start charging the phone.
Hope it works for MOTO G as well.
Click to expand...
Click to collapse
I bet it doesn't work.. it will show charging for moment.. it won't charge later then. I found out it was a USB charger issue and now I'm using Samsung USB cables.. I'm not facing any issues.. my phone charging with the default settings...
Sent from my Moto G using XDA Premium 4 mobile app
It worked for me and is still working without issues.
I cannot comment on MOTO G as I do not own it. For MOTO E it works.
All the best.............
MOTO E charging based on windows OS version
What I have observed for MOTO E is the USB cable can be used for data connection and charging. But NOT in XP OS based system where it is only transferring data, where as in Windows 7 based system the Phone is charging as well as transferring data
I have tried both in 2-3 systems ( of both type each) and the result was same. I have tried with 3 different cable in different PC each time result was same. However the MOTO G was tried only in one XP based ( and one cable only) system where it was charging
Has anyone else also had the same experience
padhu1989 said:
Nope, that is USB cable is working for other phones.. like Samsung, Nokia... in my home its working.. I suspect the limitation in my office is preventing the charging.... I think in order to charge motog, one need to install device drivers also...
Sent from my XT1033 using xda app-developers app
Click to expand...
Click to collapse
That is not true. There is no need for device drivers. In my office i also have no admin rights and i don't have any drivers on my pc, but still it is charging.
Just bought a Moto G 4G.
Noticed this behaviour in my office when connected via USB to my laptop.
I've discovered that if I plug the cable in with the screen off / locked state, it continues to charge as it should via the USB :victory:
It's only once you unlock the screen (hitting the power button to wake the screen is fine and doesn't affect it - I use a pattern lock) and the phone detects a data connection, it then drops the charging function.
So as long as the phone doesn't go into transfer mode charging is good.
I never had a charging problem.........till today.
Wonder why this suddenly happend?!
I daily charge my phone at work using the USB port of my PC.
On my PC there are no drivers installed due to administrator restictions but i could charge the phone till now always without any problems. Today i wanted to charge my mobile and suddenly it did not charge. Restarted phone and pc what did not solve the problem. Also i was using always the same cable and the same usb ports. But below quoted suggestion helped me out of trouble. I thought charging problems were solved using 4.4.4?!
Damn.
PSatish said:
I experienced the same issue with MOTO E.
The below solution worked for me.
Once you attach the charger to the PC and the phone the default setting is applied and the phone is connected as Media device.
Swipe down to see the notification center and click on the message that provides the USB connection info.
Change the option to Camera(PTP) and it will start charging the phone.
Hope it works for MOTO G as well.
Click to expand...
Click to collapse
:good:
@vkr200710: In our office we also have XP based PC's. Glad that there will be soon a Rollout!
Hi. (my first post at this site)
i confirm that, on xp (without drivers installed) my moto g started charging after changing USB connection to Camera(PTP) mode.
cya'
Sergio from Argentina
Enable USB Debugging
Works for me after enabling USB Debugging option.
I have Windows 7. Both at work and Home. It needs to install USB drivers to charge via USB Cable. But in Office I was unable to install driver due to restriction. I Enabled Developers option and then USB Debugging and wallah it worked like charm.
Not sure if this will work on XP.
To enable and access developer options on Moto E, you can simply follow these steps:
Tap Settings
Tap About phone
Tap the Build number field 7 times. You will begin seeing a message as you approach the 7 touches.
Tap the back arrow once complete.
Go to Developer Options and check USB debugging
yes its working
[email protected] said:
Works for me after enabling USB Debugging option.
I have Windows 7. Both at work and Home. It needs to install USB drivers to charge via USB Cable. But in Office I was unable to install driver due to restriction. I Enabled Developers option and then USB Debugging and wallah it worked like charm.
Not sure if this will work on XP.
To enable and access developer options on Moto E, you can simply follow these steps:
Tap Settings
Tap About phone
Tap the Build number field 7 times. You will begin seeing a message as you approach the 7 touches.
Tap the back arrow once complete.
Go to Developer Options and check USB debugging
Click to expand...
Click to collapse
Yes after making it to debugging mode its damn working cool yar......
Worked for me in office laptop moto g
Even i have also faced the same issue, pl dont select either options(PTP and MTP) modes then it works
not charging moto g connected to laptop
i have followed the debugging options said yet again its not charging
Same Problem here: But I guess the PC isn't the problem
padhu1989 said:
I have Mato G XT1033, just got it yesterday. And I have my old samsung data cable with me. I am using the samsung's one since there is no data cable provided by moto g. today I tried charging my mobile in my office, when I connected my phone to the CPU, its showing "Charging" in the notification bar, but after a minute, I can see in battery settings, it showing as "Not charging" but I can still the charging logo in my battery icon.
There is a restriction policy in my office computer, it wont allow to install device drivers... Moto G is not getting charging because of this limitation in my office PC or any bug in my phone?
Kindly help...Thanks in advance.
Click to expand...
Click to collapse
I've a similar problem too. My Moto G3 charges well with my old laptop (HP 431) but when I use the same data cable on my new laptop (HP Pavilion x360 Convertible) the phone shows charging for about 30 seconds then it wont charge after that. The problem repeats if I unplug the phone and plug it in again i.e it shows charging for some time and won't charge again. I tried installing the latest Motorola drivers from the Motorola but it won't solve the issue. Can anyone provide a fix for this.
Hello guys,
I bought my Moto G (Indian, Dual Sim with Kitkat out-of-the-box) couple of days back.
So here are few issues:
1) While I connected it to wall charger, there's no charging animation showed even though its charging. Is it like that with everyone?
2) It doesn't get charged while I connect it through USB to my Windows 7 PC. Normal?
3) It gets connected only as MTP. No Mass Storage Device option in the USB Connection. And it doesn't let me copy folders. Only individual files. Anyone else?
Thanks for your replies.
1) There is no charging animation but only a flashing sign over battery.
2) Connecting via usb to pc charges the phone same as wall charger but also offers option such as mtp and stuffs..
3) No usb mass storage option instead mtp is activated by default. Yes i can transfer folders too.
Sent from my XT1033 using xda app-developers app
I was buy android phone 9 days ago.
First case, my battery indicator stuck on 50%, after use or charge only stuck on 50%.
Second case, when i connect my phone to pc, nothing happen, only charging indicator.. Nothing popup mtp or storage device option or something.. I have enable usb debugging on developer option.
And another testing, I try connect my usb OTG type-C, but my phone cant detect my otg..
What should i do to fix this issue? This is bugs on my ROM or from my usb type-C phone connector broken?
pls help me :''/
Sorry i can't added picture, beause my phone totally can't use after all experiment and wipe all data..
Stuck with TWRP and "No OS installed".
Btw, I can't insert ROM files to my device, because my phone cant recognize my pc or transfer data via usb..
feels life on flintstones century, disconnect communication from all my friend more than 3 days :'(
i tried to plug in my mi4c to computer - charging work fine but phone doesnt show in my computer and in mi pc suite. I used 2 different cables and tried all usb ports, with and without usb debugging. No problem few months ago with this and now nothing, no reaction on pc. Anyone can help me?
i have miui 8.2 by xiaomi.eu
Hi guys I need your help.
Since a while my Poco X3 NFC (M2007J20CG) MIUI 13.0.4 is not showing the usb connected notification anymore.
I tested multiple Xiaomi cable and several PC and USB Ports (both Linux and Win10) and this is what I've got:
Charge working properly (Mi Fast Charge too)
NO notification when the cable is inserted to a pc
NO way to choose the various type of connection.
I tried to access USB Debugging to test an app but no wired adb device is found and when i plug in the cable the only thing I have is the charging of the battery.
Can anyone help me?
Thanks in advance