Before starting you need to :
1- download unbirck tool (RM3, RM3S);
2- download TWRP for A11 (for both of them)
3-download minimal adb and fastboot tool ADB
4- Buy OTG Link
The Steps1- You should install the ADB
2- Go to fastboot mode then to Boot to edload (by using volume down) then press power the screen will be black screen
3- Open the unbirck tool and follow the steps which the developer put in his note
4- if the phone didn't open and still giving (device is corrupt) go to again to fastboot mode then open the TWRP tool (its in cn language so may be weird for you) and will explain the steps in pics
5- when it finishes go down in fastboot mode to reach to recovery mode press on power it will take u to TWRP (may u found it in cn language so follow that video to make it in eng)
6- Plug ur flash drive in ur pc and put the rom on it RM3S , RM3
7- Connect ur phone with that flash drive then in TWRP [ Mount > Select Storage > USB-CTG ] then go back and join [Install > the rom which u downloaded] after that restart the phone
Note : 1- While installing TWRP you should be in fastboot mode only, don't go to boot edload ... Sec pic u press on fasboot [may at first u get failed after first pic open the tool again and try again]
2- You will need ADB when u open the bootloader
If there is anything DM me
RZaR2001 said:
Before starting you need to :
1- download unbirck tool (RM3, RM3S);
2- download TWRP for A11 (for both of them)
3-download minimal adb and fastboot tool ADB
4- Buy OTG Link
The Steps1- You should install the ADB
2- Go to fastboot mode then to Boot to edload (by using volume down) then press power the screen will be black screen
3- Open the unbirck tool and follow the steps which the developer put in his note
4- if the phone didn't open and still giving (device is corrupt) go to again to fastboot mode then open the TWRP tool (its in cn language so may be weird for you) and will explain the steps in pics
5- when it finishes go down in fastboot mode to reach to recovery mode press on power it will take u to TWRP (may u found it in cn language so follow that video to make it in eng)
6- Plug ur flash drive in ur pc and put the rom on it RM3S , RM3
7- Connect ur phone with that flash drive then in TWRP [ Mount > Select Storage > USB-CTG ] then go back and join [Install > the rom which u downloaded] after that restart the phone
Note : 1- While installing TWRP you should be in fastboot mode only, don't go to boot edload ... Sec pic u press on fasboot [may at first u get failed after first pic open the tool again and try again]
2- You will need ADB when u open the bootloader
If there is anything DM me
Click to expand...
Click to collapse
Who is better in Red Magic 3/3S
I mean Android = 9/10/11 ?
lilo_ind said:
Who is better in Red Magic 3/3S
I mean Android = 9/10/11 ?
Click to expand...
Click to collapse
Look i use RM3S software but i have RM3 .. i feel that RM3S software smooth more than RM3 software .. look i see u stay on A10 till they fix all bugs in A11 .. its my point + Pubg not working in A11 for RM3/3S so if u playing on it don't use now A11
Edit: pubg worked u can download it from Here
I had problem about less charger mA on 3 charger and cables so strange on my red magic 3s, so yesterday i did buy another cable and same thing less mA like 100 should be 3000 , so i did use one charger adapter rampow for try , when i did put charger less again but the screen get blocked and reboot , when it restarted i did see that if i put to charger again also with orginal charger and cable will block screen and reboot so i did try to reset and install Europe & Asia: V212 , when did get 100% will show that " Device is corrupt. It can't be trusted and will not boot " ,this happen if you put one not original cable or charger i did discovery ,now the problem is if i put the cable on laptop for flash install roms windows will not detected the new hardware of red magic so how can i fix that now
cacaocaca said:
I had problem about less charger mA on 3 charger and cables so strange on my red magic 3s, so yesterday i did buy another cable and same thing less mA like 100 should be 3000 , so i did use one charger adapter rampow for try , when i did put charger less again but the screen get blocked and reboot , when it restarted i did see that if i put to charger again also with orginal charger and cable will block screen and reboot so i did try to reset and install Europe & Asia: V212 , when did get 100% will show that " Device is corrupt. It can't be trusted and will not boot " ,this happen if you put one not original cable or charger i did discovery ,now the problem is if i put the cable on laptop for flash install roms windows will not detected the new hardware of red magic so how can i fix that now
Click to expand...
Click to collapse
U tried the tool unbrick?
i can t do that because windows not recognized the phone , so i should get that before all but i did see some solution maybe and afther can i do all maybe
1. https://forum.xda-developers.com/t/q-bricked-and-not-recognized-by-usb.2280393/post-41531497
2. https://forum.xda-developers.com/t/...device-in-download-mode.1486234/post-22454863
And now maybe i did understand because have less charger also with the new cable maybe
cacaocaca said:
i can t do that because windows not recognized the phone , so i should get that before all but i did see some solution maybe and afther can i do all maybe
1. https://forum.xda-developers.com/t/q-bricked-and-not-recognized-by-usb.2280393/post-41531497
2. https://forum.xda-developers.com/t/...device-in-download-mode.1486234/post-22454863
And now maybe i did understand because have less charger also with the new cable maybe
Click to expand...
Click to collapse
Come pm
RZaR2001 said:
Come pm
Click to expand...
Click to collapse
Thankyou So much RZaR2001 i am glad to say that i successfully unbricked my NUBIA REDMAGIC 3 love you bro❤ No homo
m device is not recognized in my pc i also tried using different laptops so i cant go any more from step 2....and i dint even enable usb debugging is there any way i can enable it from hardbrick mode(currupted stage)
help me please.....
RZaR2001 said:
Before starting you need to :
1- download unbirck tool (RM3, RM3S);
2- download TWRP for A11 (for both of them)
3-download minimal adb and fastboot tool ADB
4- Buy OTG Link
The Steps1- You should install the ADB
2- Go to fastboot mode then to Boot to edload (by using volume down) then press power the screen will be black screen
3- Open the unbirck tool and follow the steps which the developer put in his note
4- if the phone didn't open and still giving (device is corrupt) go to again to fastboot mode then open the TWRP tool (its in cn language so may be weird for you) and will explain the steps in pics
5- when it finishes go down in fastboot mode to reach to recovery mode press on power it will take u to TWRP (may u found it in cn language so follow that video to make it in eng)
6- Plug ur flash drive in ur pc and put the rom on it RM3S , RM3
7- Connect ur phone with that flash drive then in TWRP [ Mount > Select Storage > USB-CTG ] then go back and join [Install > the rom which u downloaded] after that restart the phone
Note : 1- While installing TWRP you should be in fastboot mode only, don't go to boot edload ... Sec pic u press on fasboot [may at first u get failed after first pic open the tool again and try again]
2- You will need ADB when u open the bootloader
If there is anything DM me
Click to expand...
Click to collapse
This man is sooooo Goooood Thankyou soomuch For helping me and other people out there. This man will give it his time to help and fix my iisue he's actually handsome tho. So i recommend this guy if you want some solution for your problem just direct him. This man is sooooo kind it will make your day much happier hahaha
RZaR2001 said:
Before starting you need to :
1- download unbirck tool (RM3, RM3S);
2- download TWRP for A11 (for both of them)
3-download minimal adb and fastboot tool ADB
4- Buy OTG Link
The Steps1- You should install the ADB
2- Go to fastboot mode then to Boot to edload (by using volume down) then press power the screen will be black screen
3- Open the unbirck tool and follow the steps which the developer put in his note
4- if the phone didn't open and still giving (device is corrupt) go to again to fastboot mode then open the TWRP tool (its in cn language so may be weird for you) and will explain the steps in pics
5- when it finishes go down in fastboot mode to reach to recovery mode press on power it will take u to TWRP (may u found it in cn language so follow that video to make it in eng)
6- Plug ur flash drive in ur pc and put the rom on it RM3S , RM3
7- Connect ur phone with that flash drive then in TWRP [ Mount > Select Storage > USB-CTG ] then go back and join [Install > the rom which u downloaded] after that restart the phone
Note : 1- While installing TWRP you should be in fastboot mode only, don't go to boot edload ... Sec pic u press on fasboot [may at first u get failed after first pic open the tool again and try again]
2- You will need ADB when u open the bootloader
If there is anything DM me
Click to expand...
Click to collapse
after flash v3.30 device logo restart only
[email protected] -help me bro
RZaR2001 said:
Before starting you need to :
1- download unbirck tool (RM3, RM3S);
2- download TWRP for A11 (for both of them)
3-download minimal adb and fastboot tool ADB
4- Buy OTG Link
The Steps1- You should install the ADB
2- Go to fastboot mode then to Boot to edload (by using volume down) then press power the screen will be black screen
3- Open the unbirck tool and follow the steps which the developer put in his note
4- if the phone didn't open and still giving (device is corrupt) go to again to fastboot mode then open the TWRP tool (its in cn language so may be weird for you) and will explain the steps in pics
5- when it finishes go down in fastboot mode to reach to recovery mode press on power it will take u to TWRP (may u found it in cn language so follow that video to make it in eng)
6- Plug ur flash drive in ur pc and put the rom on it RM3S , RM3
7- Connect ur phone with that flash drive then in TWRP [ Mount > Select Storage > USB-CTG ] then go back and join [Install > the rom which u downloaded] after that restart the phone
Note : 1- While installing TWRP you should be in fastboot mode only, don't go to boot edload ... Sec pic u press on fasboot [may at first u get failed after first pic open the tool again and try again]
2- You will need ADB when u open the bootloader
If there is anything DM me
Click to expand...
Click to collapse
this man is really awsome for red magic device. now im on v5.11 and using gapps. thnx again
RZaR2001 said:
Before starting you need to :
1- download unbirck tool (RM3, RM3S);
2- download TWRP for A11 (for both of them)
3-download minimal adb and fastboot tool ADB
4- Buy OTG Link
The Steps1- You should install the ADB
2- Go to fastboot mode then to Boot to edload (by using volume down) then press power the screen will be black screen
3- Open the unbirck tool and follow the steps which the developer put in his note
4- if the phone didn't open and still giving (device is corrupt) go to again to fastboot mode then open the TWRP tool (its in cn language so may be weird for you) and will explain the steps in pics
5- when it finishes go down in fastboot mode to reach to recovery mode press on power it will take u to TWRP (may u found it in cn language so follow that video to make it in eng)
6- Plug ur flash drive in ur pc and put the rom on it RM3S , RM3
7- Connect ur phone with that flash drive then in TWRP [ Mount > Select Storage > USB-CTG ] then go back and join [Install > the rom which u downloaded] after that restart the phone
Note : 1- While installing TWRP you should be in fastboot mode only, don't go to boot edload ... Sec pic u press on fasboot [may at first u get failed after first pic open the tool again and try again]
2- You will need ADB when u open the bootloader
If there is anything DM me
Click to expand...
Click to collapse
Hi
I habe redmagic 3 stuck at device corrupted
I have tried almost every guide i could
Its still same
I tried your way and now it keeos booting back to fastboot
Even if i choose reboot to recovery or reboot to system after i use twrp tool
Any suggestions?
hafizrehman1992 said:
Hi
I habe redmagic 3 stuck at device corrupted
I have tried almost every guide i could
Its still same
I tried your way and now it keeos booting back to fastboot
Even if i choose reboot to recovery or reboot to system after i use twrp tool
Any suggestions?
Click to expand...
Click to collapse
Pm me
RZaR2001 said:
Before starting you need to :
1- download unbirck tool (RM3, RM3S);
2- download TWRP for A11 (for both of them)
3-download minimal adb and fastboot tool ADB
4- Buy OTG Link
The Steps1- You should install the ADB
2- Go to fastboot mode then to Boot to edload (by using volume down) then press power the screen will be black screen
3- Open the unbirck tool and follow the steps which the developer put in his note
4- if the phone didn't open and still giving (device is corrupt) go to again to fastboot mode then open the TWRP tool (its in cn language so may be weird for you) and will explain the steps in pics
5- when it finishes go down in fastboot mode to reach to recovery mode press on power it will take u to TWRP (may u found it in cn language so follow that video to make it in eng)
6- Plug ur flash drive in ur pc and put the rom on it RM3S , RM3
7- Connect ur phone with that flash drive then in TWRP [ Mount > Select Storage > USB-CTG ] then go back and join [Install > the rom which u downloaded] after that restart the phone
Note : 1- While installing TWRP you should be in fastboot mode only, don't go to boot edload ... Sec pic u press on fasboot [may at first u get failed after first pic open the tool again and try again]
2- You will need ADB when u open the bootloader
If there is anything DM me
Click to expand...
Click to collapse
OMG guys
this guy in an angel
within sometime of me posting here for help
he Contacted me through pm
and then we started conversation through whatsapp
he took details of how i got myself stuck
and then through anydesk
downloaded some files and viola
my device is running again
on cn version 5.11 android 11
rooted and with gapps installed
i can't thank you enough brother
god bless you
please guys
give a like to this post
and applaud for his generosity that when i offered to pay him he said he is gona do it for free
Thanks a lot
i wud be forever your thankful
lotz of love n prayer from me❤♥♥♥♥♥♥♥
hafizrehman1992 said:
OMG guys
this guy in an angel
within sometime of me posting here for help
he Contacted me through pm
and then we started conversation through whatsapp
he took details of how i got myself stuck
and then through anydesk
downloaded some files and viola
my device is running again
on cn version 5.11 android 11
rooted and with gapps installed
i can't thank you enough brother
god bless you
please guys
give a like to this post
and applaud for his generosity that when i offered to pay him he said he is gona do it for free
Thanks a lot
i wud be forever your thankful
lotz of love n prayer from me❤♥♥♥♥♥♥♥
Click to expand...
Click to collapse
i want to do the exact same solution but i have bricked my rm3 with a downgrade. now my best problema is that pc not recognized the Phone on fastboot. i'm demoralized...
fedezio said:
i want to do the exact same solution but i have bricked my rm3 with a downgrade. now my best problema is that pc not recognized the Phone on fastboot. i'm demoralized...
Click to expand...
Click to collapse
I also had that issue and i fixed it recently,
Just go to a mobile shop tell them to try to unlock bootloader step while connected to a box like miracle, ultimate where any of red magic series phone available.
After that the result got failed but phone starting recognizing in fastboot mode.
Thnx me later.
Thank you for your enthusiastic help. My phone came back to life
Bro around 15-20 days back I was on global rom, as it was not receiving any update lately thought to install cn android 11 rom. After installing the rom I was unable to find any twrp for it so, I downgraded it to android 10 cn rom, but my phone got bricked. I thought there might be some issue with recovery so I did a fresh install following:
Using cn android 11 rom
Using brioli
Extracted the sdat2img.py system.transfer.list system.new.dat system.img
fastboot oem nubia_unlock NUBIA_NX629J
Fastboot erase boot
Fastboot erase recovery
Fastboot erase system
Fastboot erase userdata
Fastboot erase cache
Fastboot erase data
fastboot erase system
fastboot erase modem
fastboot erase dsp
fastboot erase vbmeta
fastboot erase dtbo
fastboot flash parameter parameter.img
fastboot reboot bootloader
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash modem NON-HLOS.bin
fastboot flash dtbo dtbo.img
fastboot flash dsp dspso.bin
fastboot flash vbmeta vbmeta.img
fastboot flash -S 100M system system.img
fastboot reboot
It showed device corrupt again
I tried unbrick tool and the twrp you uploaded.
But after installing the twrp, when I try to reboot to recovery, it reboots in fastboot again.
I have tried at least 10-11 times with the above process but no luck.
Please help me out bro this is my only phone and we don't have a service center here.
Best regards,
Dibyank
Dibyank said:
Bro around 15-20 days back I was on global rom, as it was not receiving any update lately thought to install cn android 11 rom. After installing the rom I was unable to find any twrp for it so, I downgraded it to android 10 cn rom, but my phone got bricked. I thought there might be some issue with recovery so I did a fresh install following:
Using cn android 11 rom
Using brioli
Extracted the sdat2img.py system.transfer.list system.new.dat system.img
fastboot oem nubia_unlock NUBIA_NX629J
Fastboot erase boot
Fastboot erase recovery
Fastboot erase system
Fastboot erase userdata
Fastboot erase cache
Fastboot erase data
fastboot erase system
fastboot erase modem
fastboot erase dsp
fastboot erase vbmeta
fastboot erase dtbo
fastboot flash parameter parameter.img
fastboot reboot bootloader
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash modem NON-HLOS.bin
fastboot flash dtbo dtbo.img
fastboot flash dsp dspso.bin
fastboot flash vbmeta vbmeta.img
fastboot flash -S 100M system system.img
fastboot reboot
It showed device corrupt again
I tried unbrick tool and the twrp you uploaded.
But after installing the twrp, when I try to reboot to recovery, it reboots in fastboot again.
I have tried at least 10-11 times with the above process but no luck.
Please help me out bro this is my only phone and we don't have a service center here.
Best regards,
Dibyank
Click to expand...
Click to collapse
Pm me
Related
My OPO is 100% stock currently running the second latest OTA update(coz I'd received a notification saying theres new update today but i haven't updated)
It was working perfectly fine until just now when I withdraw it from my pocket it shows the 1+ Powered by android loading screen.
I re-booted and it stuck at the same screen. I then boot into recovery and factory reset, wipe data wipe cache and boot and its still stucking at the same loading screen.
P/S : I was on wifi for a while in the cafe maybe it had downloaded the new OTA and maybe when the screen rubs against my pants in my pocket idk how it unlocks itself and it update itself with the downloaded(maybe) software update and eventually it dies. This might be one of the possibilities because if otherwise, it just dies itself without reason lel.
I've researched abit and someone suggested me to flash a stock rom using fastboot mode and PC adb command prompt which idk wtf is that lel. But in order to use that u need to unlock bootloader right, being 100% stock my bootloader is probably locked right?
omfg please guide me through this i need to solve this asap i dont have a backup phone. :silly::silly::silly::silly::silly::silly:
kingdew11 said:
My OPO is 100% stock currently running the second latest OTA update(coz I'd received a notification saying theres new update today but i haven't updated)
It was working perfectly fine until just now when I withdraw it from my pocket it shows the 1 Powered by android loading screen.
I re-booted and it stuck at the same screen. I then boot into recovery and factory reset, wipe data wipe cache and boot and its still stucking at the same loading screen.
P/S : I was on wifi for a while in the cafe maybe it had downloaded the new OTA and maybe when the screen rubs against my pants in my pocket idk how it unlocks itself and it update itself with the downloaded(maybe) software update and eventually it dies. This might be one of the possibilities because if otherwise, it just dies itself without reason lel.
I've researched abit and someone suggested me to flash a stock rom using fastboot mode and PC adb command prompt which idk wtf is that lel. But in order to use that u need to unlock bootloader right, being 100% stock my bootloader is probably locked right?
omfg please guide me through this i need to solve this asap i dont have a backup phone. :silly::silly::silly::silly::silly::silly:
Click to expand...
Click to collapse
Follow this
http://forum.xda-developers.com/oneplus-one/help/solved-how-to-recover-oneplus-soft-t2864800
OR
Agai u can manually download any cm firmware
Then go to recovery
Factory reset
And flash desired firmware
FOLLOW this ( this is cm12 os)
http://webtrickz.com/guide-to-update-oneplus-one-to-cm12-lollipop-os/
If u don't like lollipop u can flash cm11s
FOLLOW this
http://www.technobuzz.net/update-oneplus-one-cm-11s-44s-resolve-several-bug-fixes/
note: u can find most guides on Google just search with keywords of your problems
Second mentioned flashing methods are most easiest prrocess
Factory reset and flash u r zip file
Problem solved. Detailed solutions for noobs like me!
OKAY here is what I DID. it may not work for u, but it worked for me. so if ur gonna follow these steps do it at ur own risk. and please dont expect me to helpp u to counter any special circumstances i.e. any condition not stated here coz im a perfect noob too, lel.
FYI this is called flashing roms in fastboot mode. And i had successfully flashed my OPO back into CM12.
STEPS :
Using a windows PC:
1) Download the UNIVERSAL ABD driver for Windows and freaking INSTALL IT.
2) Download the OnePlus One CM12 factory image “cm-12.0-YNG1TAS0YL-bacon-signed-fastboot.zip” (fastboot flashable package).
3) Download the flashing tools. ( it contains 4 things: adb.exe AdbWinApi.dll AdbUsbWinApi.dll and fastboot.exe)
the download links are available from this link:
ok im not allowed to attach links but u can search for it " webtrickz[dot]com how to flash cm12 factory image fastboot mode"
however, the steps given in the above link are crappy as well so follow mine =P just do the downloadings only from there.
4) Extract the 4 things from the flashing tools zip file into a folder, name it whatever****ing folder u want. we call it folder X.
5) and then extract all the things in the CM12 rom zip file into folder X.
6) Boot ur phone into fastboot mode simply by pressing and holding down the power button and the volume up button simultanoesly until u see "fastboot mode" with an Android face appears.
7) Connect ur phone to your PC with a USB cable. Now ur phone should be connected to the pc in fastboot mode.
8) open up folder X. then right click in folder X while holding down the Shift button, and click on "Open command window here"
p/s : this, I think, is like a special way to open up a cmd prompt used specifically for abd/fastboot. U can also actually open up cmd prompt normally but in order to do that you need to install idk some **** so that ur NORMAL cmd prompt will recognise abd or whatever **** it is. however, if u do that, u do not need to extract the CM12 rom files into folder X as the NORMAL cmd prompt will have the ability to, sorta like detect the CM12 ****s. anyways, forget it, just ****ing use the special way i.e. go to folder X , shift + right click to open up the SPECIAL cmd prompt)
9) a command prompt(cmd) should appear, Now check if u are connected by keying in "fastboot devices" in the cmd. Then the serial number of ur phone should turn up, and not " waiting for device" "devices not found" or any messages of that sort.
If the latter appears, idk how to help u sort that out urself lel.
10) Now u have to unlock the OEM in order for this flashing process to work. idk whats unlocking oem but just unlock it FFS. To do this, simply key in "fastbook oem unlock"
11) I think that under normal circumstances, a pop-up will appear in ur phone to let u choose if u really wanna unlock this oem thingy. BUT for me, my phone just rebooted back into the ****ing 1+ Powered by android screen idk why, but its alright i was on the right track as my oem has been unlocked. Then i powered off my phone and booted in back into fastboot mode once again. (FYI whenever I have to boot my phone to fastboot mode I disconnect the usb cable idk if this is necessary but thats what i DID)
12) go back to the CMD just now, and freaking paste the commands listed below into the CMD.
fastboot flash modem NON-HLOS.bin
fastboot flash sbl1 sbl1.mbn
fastboot flash dbi sdi.mbn
fastboot flash aboot emmc_appsboot.mbn
fastboot flash rpm rpm.mbn
fastboot flash oppostanvbk static_nvbk.bin
fastboot flash tz tz.mbn
fastboot flash LOGO logo.bin
fastboot flash boot boot.img
fastboot flash cache cache.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash userdata userdata.img
fastboot reboot
13) Wait for several minutes, and when everything's done, the commands will stop at the last command which is "fastboot reboot"
Press Enter! and ur phone will reboot normally! =)
walpanmad said:
Follow this
http://forum.xda-developers.com/oneplus-one/help/solved-how-to-recover-oneplus-soft-t2864800
OR
Agai u can manually download any cm firmware
Then go to recovery
Factory reset
And flash desired firmware
FOLLOW this ( this is cm12 os)
http://webtrickz.com/guide-to-update-oneplus-one-to-cm12-lollipop-os/
If u don't like lollipop u can flash cm11s
FOLLOW this
http://www.technobuzz.net/update-oneplus-one-cm-11s-44s-resolve-several-bug-fixes/
note: u can find most guides on Google just search with keywords of your problems
Second mentioned flashing methods are most easiest prrocess
Factory reset and flash u r zip file
Click to expand...
Click to collapse
I can't flash it with recovery, as i cant 'insert' any ROM into my internal memory, as i cannot access my Internal memory, coz the phone wont boot?
However thank you so much! problem solved =)
kingdew11 said:
I can't flash it with recovery, as i cant 'insert' any ROM into my internal memory, as i cannot access my Internal memory, coz the phone wont boot?
However thank you so much! problem solved =)
Click to expand...
Click to collapse
Phone wont boot means?
If u are able to get in to recovery then its always possible to flash any official firmware without root with factory reset its easiest process to solve soft bricked device
First method mentioned is the same process u had done
(fastboot recover) but its automated process with OPO tollbox
Again fastboot method is usefull if u already enabled usb debugging in developer option before u went in to bootloop
I think u have previously enabled usb debugging
So it is also a method to recover u r problem
Any way its great news u got it worked
I flashed stock fastboot rom (YU OS) and it booted. After that, I did "fastboot oem lock" and phone not booting. fastboot not allowing me to flash another rom too.
I googled about this and it says I need to enabled USB debugging from dev tools. But since phone not booting, I am not able to do this.
Can anyone help please?
parvejsolkar said:
I flashed stock fastboot rom (YU OS) and it booted. After that, I did "fastboot oem lock" and phone not booting. fastboot not allowing me to flash another rom too.
I googled about this and it says I need to enabled USB debugging from dev tools. But since phone not booting, I am not able to do this.
Can anyone help please?
Click to expand...
Click to collapse
Hmm you use a single bad command
fastboot oem lock
Its created problem at all.
Flash stock ROM using ets tool.
Download stock ROM from firmwarefile.com
http://firmwarefile.com/yu-yunique
Contents of the ZIP :
Drivers
Firmware
Flash Tool
YU YUNIQUE STOCK ROM FLASHING TECHNIQUE { TESTED AND WORKING }
==============================
· Now Extract the folder on Desktop
· Install the Driver given in the Driver Folder
· Restart PC
· Open the ETS Flash tool
· Connect your phone in Fastboot Mode
To go to FASTBOOT Mode...
Switch off your phone.
Press Vol. Down + Power Button till the YU logo comes up.
Then.. It will stuck on YU Logo.. and thats the FASTBOOT Mode.
· Press the Butterfly USB Button
· You can see your device to the connected USB Slot with Device ID 0X2A96
· Now open Set Select Emergency Mode and Select the Firmware Folder
· Now Select the Correct USB Slot for Example : USB801 and Set others to NULL
· Now Switch off Phone
· PRESS VOLUME UP + VOLUME DOWN + POWER BUTTON KEEP PRESSED AND AFTER SOME TIME THE SCREEN WILL TURN ON AND THE PHONE WILL VIBRATE AND WILL IMMEDIATELY THE SCREEN WILL GO BLANK...
DON'T WORRY AS IT HAS NOW SUCCESSFULLY ENTERED THE DOWNLOAD MODE.
AND THEN CONNECT PHONE TO PC.
IT WILL SHOW UP AS 'sahara download mode'. If it doesn't show this try installing Qualcomm USB Drivers.
Press Start All Then You have to wait ( DO NOT DISCCONECT THE MOBILE KEEP ATLEAST 50% BATTERY )
Phone will restart Automatically
Full reset wipe data and restart
ENJOY!! Its done.
After it you got unbricked yu yunique
Now follow steps given on yuplaydeveloper site to flash latest official yuos
Don't use any other commands which is not in steps.
:laugh:
Hit thanks if you solve it with this method.
bro i'm getting a md5 checksum error on tz.mbn and the process fails everytime in v2. However v1 worked for me. Thanks for the guide :laugh:
1. Turn of your phone
2. HOLD volume Down & connect to your pc
3. Extract your firmware via Huawei UPDATE Extractor Software [ Extract Boot , Recovery & System Only ]
Software Link - https://forum.xda-developers.com/att...6&d=1481543154
4. DOWNLOAD SRK TOOL
Link - https://www.androidfilehost.com/?fid=23991606952598964
5. Copy Boot , Recovery & System AND paste into Srk Tool FOLDER (Don't paste into any FOLDERS)
6. DOWNLOAD ADB & Fastboot
Link - https://docs.google.com/file/d/0B2gh...dBR3VkRlE/view
Open ADB & Fastboot FOLDER
7. HOLD Shift Key & Right Click on FOLDER of ADB & Fastboot
8. Click on OPEN COMMAND WINDOW HERE
9.Type
Fastboot flash boot BOOT.img
Than press Enter Key & again type
Fastboot flash recovery RECOVERY.img
Than press Enter Key & again type
Fastboot flash system SYSTEM.img
Than press Enter Key & again type
Fastboot reboot
I'm sure sure it's will work 100% also work on any Huawei Phone
Rakhib.Mistry said:
1. Turn of your phone
2. HOLD volume Down & connect to your pc
3. Extract your firmware via Huawei UPDATE Extractor Software [ Extract Boot , Recovery & System Only ]
Software Link - https://forum.xda-developers.com/att...6&d=1481543154
4. DOWNLOAD SRK TOOL
Link - https://www.androidfilehost.com/?fid=23991606952598964
5. Copy Boot , Recovery & System AND paste into Srk Tool FOLDER (Don't paste into any FOLDERS)
6. DOWNLOAD ADB & Fastboot
Link - https://docs.google.com/file/d/0B2gh...dBR3VkRlE/view
Open ADB & Fastboot FOLDER
7. HOLD Shift Key & Right Click on FOLDER of ADB & Fastboot
8. Click on OPEN COMMAND WINDOW HERE
9.Type
Fastboot flash boot BOOT.img
Than press Enter Key & again type
Fastboot flash recovery RECOVERY.img
Than press Enter Key & again type
Fastboot flash system SYSTEM.img
Than press Enter Key & again type
Fastboot reboot
I'm sure sure it's will work 100% also work on any Huawei Phone
Click to expand...
Click to collapse
its not working for me
rohitgohan said:
its not working for me
Click to expand...
Click to collapse
Jeah, this metod will not work to anyone, who have locked bootloader.
But, there is bug, when bootloader is unlocked (atlest in fastboot its shows that its unlockd), but realy its locked.
Why there are this bug? i dont know, but its happen when someone try with dload method to fix phone, or when with twrp recovery are flashing official nuget zip. In developer options there are turned of option "alow to unlock bootloader", and thats reason why cant flash with fastboot thease img files.
So, at the end, this method will work only in certain circumstances, and not for everyone who bricked phone, due this bug .
Arnys said:
Jeah, this metod will not work to anyone, who have locked bootloader.
But, there is bug, when bootloader is unlocked (atlest in fastboot its shows that its unlockd), but realy its locked.
Why there are this bug? i dont know, but its happen when someone try with dload method to fix phone, or when with twrp recovery are flashing official nuget zip. In developer options there are turned of option "alow to unlock bootloader", and thats reason why cant flash with fastboot thease img files.
So, at the end, this method will work only in certain circumstances, and not for everyone who bricked phone, due this bug .
Click to expand...
Click to collapse
I have unlocked bootloader i even flashed .imgs through fastboot but no use
Rakhib.Mistry said:
1. Turn of your phone
2. HOLD volume Down & connect to your pc
3. Extract your firmware via Huawei UPDATE Extractor Software [ Extract Boot , Recovery & System Only ]
Software Link - https://forum.xda-developers.com/att...6&d=1481543154
4. DOWNLOAD SRK TOOL
Link - https://www.androidfilehost.com/?fid=23991606952598964
5. Copy Boot , Recovery & System AND paste into Srk Tool FOLDER (Don't paste into any FOLDERS)
6. DOWNLOAD ADB & Fastboot
Link - https://docs.google.com/file/d/0B2gh...dBR3VkRlE/view
Open ADB & Fastboot FOLDER
7. HOLD Shift Key & Right Click on FOLDER of ADB & Fastboot
8. Click on OPEN COMMAND WINDOW HERE
9.Type
Fastboot flash boot BOOT.img
Than press Enter Key & again type
Fastboot flash recovery RECOVERY.img
Than press Enter Key & again type
Fastboot flash system SYSTEM.img
Than press Enter Key & again type
Fastboot reboot
I'm sure sure it's will work 100% also work on any Huawei Phone
Click to expand...
Click to collapse
Thanks bro it work for me..?
Bro my phone is locked and it is rooted then how to unbrick it Huawei y6 scl-l21 region middle east
P9 eva l19 dead after flash
Please Help..
Br..
p9 eva l19 flashing with sigma.
Done. Ok.
Now dead. Press only vibreting. No connecting with
Computer. Please help..
Its urgent...
Thanks a Lot.....!!!
Quick question, I bricked my phone when I did a factory reset and deleted internal storage and accidentally deleted important files while doing so. I flashed a stock update from the warehouse and completely deleted the system instead. I then flashed Lineage ROM which reinstalled the system but now causes me to get stuck in bootup. When I installed Lineage ROM, I got the following error.
Attached photo
https://imgur.com/a/nx6U5bC
kazshizka said:
Quick question, I bricked my phone when I did a factory reset and deleted internal storage and accidentally deleted important files while doing so. I flashed a stock update from the warehouse and completely deleted the system instead. I then flashed Lineage ROM which reinstalled the system but now causes me to get stuck in bootup. When I installed Lineage ROM, I got the following error.
Attached photo
https://imgur.com/a/nx6U5bC
Click to expand...
Click to collapse
Download the FULL OTA files on the last approved update you were and flash via HuRupdater method.
If you are on the Chinese variant, you can flash stock recovery via fastboot and then download firmware from there on.
cant you just restore your nandroid backup?
blitzball said:
cant you just restore your nandroid backup?
Click to expand...
Click to collapse
Not on Oreo because TWRP does not support encryption and thus cannot backup/restore Data partition
1. Open Settings-About Phone, repeat click Build Number until Developer options shown.
2. Check USB debugging and OEM unlocking
3. Install adb and USB driver, then connect RM3 to computer
USB Driver: https://developer.android.com/studio/run/win-usb
ADB: https://forum.xda-developers.com/showthread.php?t=2317790
4. open cmd, then type adb reboot bootloader , then phone will reboot to fastboot mode.
5. Use fastboot flashing unlock, use volume key select unlock , confirm with power button , then the phone will do factory reset and reboot. Now the phone is unlocked
6. Install Magisk Manager, you can download it here: https://github.com/topjohnwu/Magisk/releases/latest
7. Download current ROM of RM3 here: http://ui.nubia.cn/rom/detail/62 then unpack it, copy boot.img to your phone.
8. Use Magisk Manager patch the boot.img then copy magisk_patched.img to computer.
9. Power off. Then hold volume down+ power button , boot into fastboot mode.
10. Flash the patched kernel to phone.
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot magisk_patched.img
fastboot reboot
11. The phone is rooted now.
Note:
1. All data will be erased when unlock bootloader
2. After unlock, a warning will shown when phone boot.
changguangyu said:
1. Open Settings-About Phone, repeat click Build Number until Developer options shown.
2. Check USB debugging and OEM unlocking
3. Install adb and USB driver, then connect RM3 to computer
USB Driver: https://developer.android.com/studio/run/win-usb
ADB: https://forum.xda-developers.com/showthread.php?t=2317790
4. open cmd, then type adb reboot bootloader , then phone will reboot to fastboot mode.
5. Use fastboot flashing unlock, use volume key select unlock , confirm with power button , then the phone will do factory reset and reboot. Now the phone is unlocked
6. Install Magisk Manager, you can download it here: https://github.com/topjohnwu/Magisk/releases/latest
7. Download current ROM of RM3 here: http://ui.nubia.cn/rom/detail/62 then unpack it, copy boot.img to your phone.
8. Use Magisk Manager patch the boot.img then copy magisk_patched.img to computer.
9. Power off. Then hold volume down+ power button , boot into fastboot mode.
10. Flash the patched kernel to phone.
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot magisk_patched.img
fastboot reboot
11. The phone is rooted now.
Note:
1. All data will be erased when unlock bootloader
2. After unlock, a warning will shown when phone boot.
Click to expand...
Click to collapse
thank you so much friend
Can you please make a video how to use Google camera in nubia red magic 3
changguangyu said:
1. Open Settings-About Phone, repeat click Build Number until Developer options shown.
2. Check USB debugging and OEM unlocking
3. Install adb and USB driver, then connect RM3 to computer
USB Driver: https://developer.android.com/studio/run/win-usb
ADB: https://forum.xda-developers.com/showthread.php?t=2317790
4. open cmd, then type adb reboot bootloader , then phone will reboot to fastboot mode.
5. Use fastboot flashing unlock, use volume key select unlock , confirm with power button , then the phone will do factory reset and reboot. Now the phone is unlocked
6. Install Magisk Manager, you can download it here: https://github.com/topjohnwu/Magisk/releases/latest
7. Download current ROM of RM3 here: http://ui.nubia.cn/rom/detail/62 then unpack it, copy boot.img to your phone.
8. Use Magisk Manager patch the boot.img then copy magisk_patched.img to computer.
9. Power off. Then hold volume down+ power button , boot into fastboot mode.
10. Flash the patched kernel to phone.
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot magisk_patched.img
fastboot reboot
11. The phone is rooted now.
Note:
1. All data will be erased when unlock bootloader
2. After unlock, a warning will shown when phone boot.
Click to expand...
Click to collapse
Hello I'm interested in rooting the ZTE Axon 10 Pro 4g. Is it possible that the root process could be similar to this? I have not bought it yet, since I want to decide between ZTE Axon 10 Pro and Xiaomi Mi 9. If the ZTE Axon will be rootable im going to get it, if not im going for the Mi 9. I already asked the German customer support and they told me that it is possible, but they would not give any details on how to do it.
Will this root methode works with international model?
WhySoSeriousJoKer said:
Will this root methode works with international model?
Click to expand...
Click to collapse
I don't have international model. But i think it will works.
If you want to use cn rom with gapps then try this mathod.
My phone is corrupted and bootloops. Is there a file that I can use in EDL mode?
changguangyu said:
1. Open Settings-About Phone, repeat click Build Number until Developer options shown.
2. Check USB debugging and OEM unlocking
3. Install adb and USB driver, then connect RM3 to computer
USB Driver: https://developer.android.com/studio/run/win-usb
ADB: https://forum.xda-developers.com/showthread.php?t=2317790
4. open cmd, then type adb reboot bootloader , then phone will reboot to fastboot mode.
5. Use fastboot flashing unlock, use volume key select unlock , confirm with power button , then the phone will do factory reset and reboot. Now the phone is unlocked
6. Install Magisk Manager, you can download it here: https://github.com/topjohnwu/Magisk/releases/latest
7. Download current ROM of RM3 here: http://ui.nubia.cn/rom/detail/62 then unpack it, copy boot.img to your phone.
8. Use Magisk Manager patch the boot.img then copy magisk_patched.img to computer.
9. Power off. Then hold volume down+ power button , boot into fastboot mode.
10. Flash the patched kernel to phone.
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot magisk_patched.img
fastboot reboot
11. The phone is rooted now.
Note:
1. All data will be erased when unlock bootloader
2. After unlock, a warning will shown when phone boot.
Click to expand...
Click to collapse
Sir..how to lock bootloader again if already in global rom asia version
I try in adb,it said locked but in setting developer option still show unlock
andixxx81 said:
Sir..how to lock bootloader again if already in global rom asia version
I try in adb,it said locked but in setting developer option still show unlock
Click to expand...
Click to collapse
First install cn rom. Then you unlock bootloader options
I want to know how can I lock the bootloader again, since i need to return this phone, it come with some issues, and if they see i touch that maybe they said that i break the warranty rules
Simple just install global or Chinese rom again ur then your bootloader lock again
sandeepkhatri said:
Simple just install global or Chinese rom again ur then your bootloader lock again
Click to expand...
Click to collapse
I have the international version, where can i get the international rom?
I also search global rom but not find. Hope anyone send global rom link
Global rom link
https://eu.redmagic.gg/blogs/news/red-magic-3-global-rom-flash-instructions
Amazing!! thank you very much! I have one question, if i root my phone, I can unroot it using the original rom?
All I get is "Your Device is corrupt. It can't be trusted and will not boot."
Can some one share the europe & asia boot image which already patch by magisk. Tks
Sent from my ALP-L29
Has anyone been successful with this yet?
Working flawlessly?
Hello guys is there any way to relock bootloader?
Works Only For Cos 6 !
Method for Rooting ur REALME U1!!
Now here is the full procedure of rooting ur REALME U1 Cos 6
Read this carefully!!
Thanks to:
*****Caution*********
U Need To Be In Unlocked Bootloader
And Also
Don't Blame Me If Anything Happens To Ur Device
*****Caution*********
How to flash Magisk boot image!!
•First : Enable Usb Debugging and Oem unlock in Developer options
•Second : Connect ur phone to ur PC "You may get a request to authorize USB debugging on the device, accept it."
•Third : Install ADB on ur PC
•Fourth : Copy the Magisk boot image into ur PC in ADB folder.
•Fifth : Now Click this in abd folder - Shift + Right click and select "Open Powershell or Open ADB "
•Sixth : Use the following command and boot into recovery mode :
adb devices(to check if ur phone is connected)
Then :
adb reboot recovery
After that :
U will boot into stock recovery
In stock recovery just click wipe data after wiping it will reboot instantly
In that time just hold Vol Down + Power To boot in to Fastboot
Then:
Use Command: fastboot devices(to check if ur phone is connected)
After That:
Use Command : fastboot flash boot rootboot.img
•After this reboot ur phone using manually.(By Holding Vol Up + Power Button)
Then install Magisk Manager Given Below And Update It
Boom Enjoy The Root???
Here is the Link to download Magisk boot image :
http://technoput.com/XnDip
Here is the Link to download Magisk Manager :
http://technoput.com/SVfiA1z
If u guys have any doubt about how to install boot image using ADB , then u can Google it or YouTube it.
NOTE!! IF YOU UPLOAD IT ON YOUTUBE OR WEBSITE WITHOUT GIVING CREDITS THEN WE WILL GIVE YOU COPYRIGHT STRIKE TO END YOUR CARRIER OF YOUTUBE OR SITE!!
Nice bro!
realme u1 got stucked in bootloading
my realme u1 got stucked on bootloading screen