Related
(Can't put the [RECOVERY][PORT] in title because it exceeds character limit)
Bugs:
- MTP (or just my driver?)
- The rest is just working fine (including adb)
How to boot?
Due to how this device works, we can only flash a stock recovery or else it won't boot with custom recovery at all
Click to expand...
Click to collapse
Download TWRP here: https://androidfilehost.com/?fid=818070582850505557
& (skip if already installed) install adb & fastboot drivers here: https://forum.xda-developers.com/showthread.php?t=2588979
1. Enable OEM unlocking & USB debugging via Settings > Developer Options
2. Open Command Prompt & "cd" where you downloaded the image & type:
Code:
adb reboot bootloader
Allow it when a prompt shows up then try again if it doesn't work
Code:
fastboot oem unlock
SKIP THIS STEP WHEN ALREADY UNLOCKED!
When a warning about unlocking bootloader shows up, press volume up (will factory reset your device after rebooting)
Code:
fastboot boot TWRP-3.1.0-0_v3961.img
There! Enjoy TWRP & READ NOTES!
NOTES:
- If this is the first time you booted TWRP, install SuperSU zip (or use "adb reboot") or else the device won't boot to Android after rebooting using TWRP's reboot option! (modifies /system partition, renames recovery-from-boot.p to recovery-from-boot.bak, causing dm-verity to invalidate system partition)
- If your /data partition is throwing errors, you need to reboot it using "adb reboot", since you've just unlocked the bootloader & needs to be formatted via stock recovery
- Since it's just "fastboot boot", it won't stay on your device (don't even try to "fastboot flash" it)
Help me Please
Pls help. My Cloudfone Excite Prime 2 got bootlopp in orange state after trying to fastboot unlock oem and flashed twrp. is there any fix please. I cant turn off my phone its always restarting on orange state on repeat.
Bootloop (
My wiko u pluse got bootloop too :crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Fixed - Forgot to read note LOL
I fastboot flash it lol :v
Hello,
Does it work on U-pulse lite ?
Thanks
Laurent
link for download twrp not working
pls provide link for download twrp u pulse v3961, that one not working anymore
twrp?
pls provide twrp for u pulse v3961, thanks
Update the twrp link please, i need it for my wiko u pulse
3DMapPlayer said:
(Can't put the [RECOVERY][PORT] in title because it exceeds character limit)
Bugs:
- MTP (or just my driver?)
- The rest is just working fine (including adb)
How to boot?
Download TWRP here: https://androidfilehost.com/?fid=818070582850505557
& (skip if already installed) install adb & fastboot drivers here: https://forum.xda-developers.com/showthread.php?t=2588979
1. Enable OEM unlocking & USB debugging via Settings > Developer Options
2. Open Command Prompt & "cd" where you downloaded the image & type:
Code:
adb reboot bootloader
Allow it when a prompt shows up then try again if it doesn't work
Code:
fastboot oem unlock
SKIP THIS STEP WHEN ALREADY UNLOCKED!
When a warning about unlocking bootloader shows up, press volume up (will factory reset your device after rebooting)
Code:
fastboot boot TWRP-3.1.0-0_v3961.img
There! Enjoy TWRP & READ NOTES!
NOTES:
- If this is the first time you booted TWRP, install SuperSU zip (or use "adb reboot") or else the device won't boot to Android after rebooting using TWRP's reboot option! (modifies /system partition, renames recovery-from-boot.p to recovery-from-boot.bak, causing dm-verity to invalidate system partition)
- If your /data partition is throwing errors, you need to reboot it using "adb reboot", since you've just unlocked the bootloader & needs to be formatted via stock recovery
- Since it's just "fastboot boot", it won't stay on your device (don't even try to "fastboot flash" it)
Click to expand...
Click to collapse
I have old phone here which is Cloudfone next lite. I want to root this phone, but I need twrp first but I don't see twrp for my phone. Is there somebody can help me 🥹
1. Open Settings-About Phone, repeat click Build Number until Developer options shown.
2. Check USB debugging and OEM unlocking
3. Install adb and USB driver, then connect RM3 to computer
USB Driver: https://developer.android.com/studio/run/win-usb
ADB: https://forum.xda-developers.com/showthread.php?t=2317790
4. open cmd, then type adb reboot bootloader , then phone will reboot to fastboot mode.
5. Use fastboot flashing unlock, use volume key select unlock , confirm with power button , then the phone will do factory reset and reboot. Now the phone is unlocked
6. Install Magisk Manager, you can download it here: https://github.com/topjohnwu/Magisk/releases/latest
7. Download current ROM of RM3 here: http://ui.nubia.cn/rom/detail/62 then unpack it, copy boot.img to your phone.
8. Use Magisk Manager patch the boot.img then copy magisk_patched.img to computer.
9. Power off. Then hold volume down+ power button , boot into fastboot mode.
10. Flash the patched kernel to phone.
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot magisk_patched.img
fastboot reboot
11. The phone is rooted now.
Note:
1. All data will be erased when unlock bootloader
2. After unlock, a warning will shown when phone boot.
changguangyu said:
1. Open Settings-About Phone, repeat click Build Number until Developer options shown.
2. Check USB debugging and OEM unlocking
3. Install adb and USB driver, then connect RM3 to computer
USB Driver: https://developer.android.com/studio/run/win-usb
ADB: https://forum.xda-developers.com/showthread.php?t=2317790
4. open cmd, then type adb reboot bootloader , then phone will reboot to fastboot mode.
5. Use fastboot flashing unlock, use volume key select unlock , confirm with power button , then the phone will do factory reset and reboot. Now the phone is unlocked
6. Install Magisk Manager, you can download it here: https://github.com/topjohnwu/Magisk/releases/latest
7. Download current ROM of RM3 here: http://ui.nubia.cn/rom/detail/62 then unpack it, copy boot.img to your phone.
8. Use Magisk Manager patch the boot.img then copy magisk_patched.img to computer.
9. Power off. Then hold volume down+ power button , boot into fastboot mode.
10. Flash the patched kernel to phone.
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot magisk_patched.img
fastboot reboot
11. The phone is rooted now.
Note:
1. All data will be erased when unlock bootloader
2. After unlock, a warning will shown when phone boot.
Click to expand...
Click to collapse
thank you so much friend
Can you please make a video how to use Google camera in nubia red magic 3
changguangyu said:
1. Open Settings-About Phone, repeat click Build Number until Developer options shown.
2. Check USB debugging and OEM unlocking
3. Install adb and USB driver, then connect RM3 to computer
USB Driver: https://developer.android.com/studio/run/win-usb
ADB: https://forum.xda-developers.com/showthread.php?t=2317790
4. open cmd, then type adb reboot bootloader , then phone will reboot to fastboot mode.
5. Use fastboot flashing unlock, use volume key select unlock , confirm with power button , then the phone will do factory reset and reboot. Now the phone is unlocked
6. Install Magisk Manager, you can download it here: https://github.com/topjohnwu/Magisk/releases/latest
7. Download current ROM of RM3 here: http://ui.nubia.cn/rom/detail/62 then unpack it, copy boot.img to your phone.
8. Use Magisk Manager patch the boot.img then copy magisk_patched.img to computer.
9. Power off. Then hold volume down+ power button , boot into fastboot mode.
10. Flash the patched kernel to phone.
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot magisk_patched.img
fastboot reboot
11. The phone is rooted now.
Note:
1. All data will be erased when unlock bootloader
2. After unlock, a warning will shown when phone boot.
Click to expand...
Click to collapse
Hello I'm interested in rooting the ZTE Axon 10 Pro 4g. Is it possible that the root process could be similar to this? I have not bought it yet, since I want to decide between ZTE Axon 10 Pro and Xiaomi Mi 9. If the ZTE Axon will be rootable im going to get it, if not im going for the Mi 9. I already asked the German customer support and they told me that it is possible, but they would not give any details on how to do it.
Will this root methode works with international model?
WhySoSeriousJoKer said:
Will this root methode works with international model?
Click to expand...
Click to collapse
I don't have international model. But i think it will works.
If you want to use cn rom with gapps then try this mathod.
My phone is corrupted and bootloops. Is there a file that I can use in EDL mode?
changguangyu said:
1. Open Settings-About Phone, repeat click Build Number until Developer options shown.
2. Check USB debugging and OEM unlocking
3. Install adb and USB driver, then connect RM3 to computer
USB Driver: https://developer.android.com/studio/run/win-usb
ADB: https://forum.xda-developers.com/showthread.php?t=2317790
4. open cmd, then type adb reboot bootloader , then phone will reboot to fastboot mode.
5. Use fastboot flashing unlock, use volume key select unlock , confirm with power button , then the phone will do factory reset and reboot. Now the phone is unlocked
6. Install Magisk Manager, you can download it here: https://github.com/topjohnwu/Magisk/releases/latest
7. Download current ROM of RM3 here: http://ui.nubia.cn/rom/detail/62 then unpack it, copy boot.img to your phone.
8. Use Magisk Manager patch the boot.img then copy magisk_patched.img to computer.
9. Power off. Then hold volume down+ power button , boot into fastboot mode.
10. Flash the patched kernel to phone.
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot magisk_patched.img
fastboot reboot
11. The phone is rooted now.
Note:
1. All data will be erased when unlock bootloader
2. After unlock, a warning will shown when phone boot.
Click to expand...
Click to collapse
Sir..how to lock bootloader again if already in global rom asia version
I try in adb,it said locked but in setting developer option still show unlock
andixxx81 said:
Sir..how to lock bootloader again if already in global rom asia version
I try in adb,it said locked but in setting developer option still show unlock
Click to expand...
Click to collapse
First install cn rom. Then you unlock bootloader options
I want to know how can I lock the bootloader again, since i need to return this phone, it come with some issues, and if they see i touch that maybe they said that i break the warranty rules
Simple just install global or Chinese rom again ur then your bootloader lock again
sandeepkhatri said:
Simple just install global or Chinese rom again ur then your bootloader lock again
Click to expand...
Click to collapse
I have the international version, where can i get the international rom?
I also search global rom but not find. Hope anyone send global rom link
Global rom link
https://eu.redmagic.gg/blogs/news/red-magic-3-global-rom-flash-instructions
Amazing!! thank you very much! I have one question, if i root my phone, I can unroot it using the original rom?
All I get is "Your Device is corrupt. It can't be trusted and will not boot."
Can some one share the europe & asia boot image which already patch by magisk. Tks
Sent from my ALP-L29
Has anyone been successful with this yet?
Working flawlessly?
Hello guys is there any way to relock bootloader?
This is root method for ZC553KL ,because the old zentalk forum shut down ,so i back up the needed file for rooting
1.Download the TWRP from my g drive :https://drive.google.com/file/d/1pAd_Z32mG7wQaYKs1Vxp03aT8QYdo7Yd/view?usp=sharing
2.Boot the phone to the fastboot mode
3.Open cmd , and type fastboot flash recovery twrp-3.1.1-0-X00D-20171020-5.img,and press enter
4.Boot phone to the recovery mode
5.And flash magisk zip/super su and Reboot your phone
6.Done!
if you want to go back to stock recovery use this :https://drive.google.com/file/d/1YUQ3RI_bV52VQqj7c1sfsjDmVZs0v69j/view?usp=sharing
update : the original dev is @shakalaca
and the original download link still work (only forum died)
original link:https://mega.nz/#F!ZtMT0KxI!ObnACk_mxnPCbPHCVu_G8Q
sylveon cheung said:
This is root method for ZC553KL ,because the old zentalk forum shut down ,so i back up the needed file for rooting
1.Download the TWRP from my g drive :https://drive.google.com/file/d/1pAd_Z32mG7wQaYKs1Vxp03aT8QYdo7Yd/view?usp=sharing
2.Boot the phone to the fastboot mode
3.Open cmd , and type fastboot flash recovery twrp-3.1.1-0-X00D-20171020-5.img,and press enter
4.Boot phone to the recovery mode
5.And flash magisk zip/super su and Reboot your phone
6.Done!
if you want to go back to stock recovery use this :https://drive.google.com/file/d/1YUQ3RI_bV52VQqj7c1sfsjDmVZs0v69j/view?usp=sharing
update : the original dev is @shakalaca
and the original download link still work (only forum died)
original link:https://mega.nz/#F!ZtMT0KxI!ObnACk_mxnPCbPHCVu_G8Q
Click to expand...
Click to collapse
Anyone can tell me is it work for oreo firmware zenfone 3 max 5'5 or not?? I've unloked bootloader
Before starting you need to :
1- download unbirck tool (RM3, RM3S);
2- download TWRP for A11 (for both of them)
3-download minimal adb and fastboot tool ADB
4- Buy OTG Link
The Steps1- You should install the ADB
2- Go to fastboot mode then to Boot to edload (by using volume down) then press power the screen will be black screen
3- Open the unbirck tool and follow the steps which the developer put in his note
4- if the phone didn't open and still giving (device is corrupt) go to again to fastboot mode then open the TWRP tool (its in cn language so may be weird for you) and will explain the steps in pics
5- when it finishes go down in fastboot mode to reach to recovery mode press on power it will take u to TWRP (may u found it in cn language so follow that video to make it in eng)
6- Plug ur flash drive in ur pc and put the rom on it RM3S , RM3
7- Connect ur phone with that flash drive then in TWRP [ Mount > Select Storage > USB-CTG ] then go back and join [Install > the rom which u downloaded] after that restart the phone
Note : 1- While installing TWRP you should be in fastboot mode only, don't go to boot edload ... Sec pic u press on fasboot [may at first u get failed after first pic open the tool again and try again]
2- You will need ADB when u open the bootloader
If there is anything DM me
RZaR2001 said:
Before starting you need to :
1- download unbirck tool (RM3, RM3S);
2- download TWRP for A11 (for both of them)
3-download minimal adb and fastboot tool ADB
4- Buy OTG Link
The Steps1- You should install the ADB
2- Go to fastboot mode then to Boot to edload (by using volume down) then press power the screen will be black screen
3- Open the unbirck tool and follow the steps which the developer put in his note
4- if the phone didn't open and still giving (device is corrupt) go to again to fastboot mode then open the TWRP tool (its in cn language so may be weird for you) and will explain the steps in pics
5- when it finishes go down in fastboot mode to reach to recovery mode press on power it will take u to TWRP (may u found it in cn language so follow that video to make it in eng)
6- Plug ur flash drive in ur pc and put the rom on it RM3S , RM3
7- Connect ur phone with that flash drive then in TWRP [ Mount > Select Storage > USB-CTG ] then go back and join [Install > the rom which u downloaded] after that restart the phone
Note : 1- While installing TWRP you should be in fastboot mode only, don't go to boot edload ... Sec pic u press on fasboot [may at first u get failed after first pic open the tool again and try again]
2- You will need ADB when u open the bootloader
If there is anything DM me
Click to expand...
Click to collapse
Who is better in Red Magic 3/3S
I mean Android = 9/10/11 ?
lilo_ind said:
Who is better in Red Magic 3/3S
I mean Android = 9/10/11 ?
Click to expand...
Click to collapse
Look i use RM3S software but i have RM3 .. i feel that RM3S software smooth more than RM3 software .. look i see u stay on A10 till they fix all bugs in A11 .. its my point + Pubg not working in A11 for RM3/3S so if u playing on it don't use now A11
Edit: pubg worked u can download it from Here
I had problem about less charger mA on 3 charger and cables so strange on my red magic 3s, so yesterday i did buy another cable and same thing less mA like 100 should be 3000 , so i did use one charger adapter rampow for try , when i did put charger less again but the screen get blocked and reboot , when it restarted i did see that if i put to charger again also with orginal charger and cable will block screen and reboot so i did try to reset and install Europe & Asia: V212 , when did get 100% will show that " Device is corrupt. It can't be trusted and will not boot " ,this happen if you put one not original cable or charger i did discovery ,now the problem is if i put the cable on laptop for flash install roms windows will not detected the new hardware of red magic so how can i fix that now
cacaocaca said:
I had problem about less charger mA on 3 charger and cables so strange on my red magic 3s, so yesterday i did buy another cable and same thing less mA like 100 should be 3000 , so i did use one charger adapter rampow for try , when i did put charger less again but the screen get blocked and reboot , when it restarted i did see that if i put to charger again also with orginal charger and cable will block screen and reboot so i did try to reset and install Europe & Asia: V212 , when did get 100% will show that " Device is corrupt. It can't be trusted and will not boot " ,this happen if you put one not original cable or charger i did discovery ,now the problem is if i put the cable on laptop for flash install roms windows will not detected the new hardware of red magic so how can i fix that now
Click to expand...
Click to collapse
U tried the tool unbrick?
i can t do that because windows not recognized the phone , so i should get that before all but i did see some solution maybe and afther can i do all maybe
1. https://forum.xda-developers.com/t/q-bricked-and-not-recognized-by-usb.2280393/post-41531497
2. https://forum.xda-developers.com/t/...device-in-download-mode.1486234/post-22454863
And now maybe i did understand because have less charger also with the new cable maybe
cacaocaca said:
i can t do that because windows not recognized the phone , so i should get that before all but i did see some solution maybe and afther can i do all maybe
1. https://forum.xda-developers.com/t/q-bricked-and-not-recognized-by-usb.2280393/post-41531497
2. https://forum.xda-developers.com/t/...device-in-download-mode.1486234/post-22454863
And now maybe i did understand because have less charger also with the new cable maybe
Click to expand...
Click to collapse
Come pm
RZaR2001 said:
Come pm
Click to expand...
Click to collapse
Thankyou So much RZaR2001 i am glad to say that i successfully unbricked my NUBIA REDMAGIC 3 love you bro❤ No homo
m device is not recognized in my pc i also tried using different laptops so i cant go any more from step 2....and i dint even enable usb debugging is there any way i can enable it from hardbrick mode(currupted stage)
help me please.....
RZaR2001 said:
Before starting you need to :
1- download unbirck tool (RM3, RM3S);
2- download TWRP for A11 (for both of them)
3-download minimal adb and fastboot tool ADB
4- Buy OTG Link
The Steps1- You should install the ADB
2- Go to fastboot mode then to Boot to edload (by using volume down) then press power the screen will be black screen
3- Open the unbirck tool and follow the steps which the developer put in his note
4- if the phone didn't open and still giving (device is corrupt) go to again to fastboot mode then open the TWRP tool (its in cn language so may be weird for you) and will explain the steps in pics
5- when it finishes go down in fastboot mode to reach to recovery mode press on power it will take u to TWRP (may u found it in cn language so follow that video to make it in eng)
6- Plug ur flash drive in ur pc and put the rom on it RM3S , RM3
7- Connect ur phone with that flash drive then in TWRP [ Mount > Select Storage > USB-CTG ] then go back and join [Install > the rom which u downloaded] after that restart the phone
Note : 1- While installing TWRP you should be in fastboot mode only, don't go to boot edload ... Sec pic u press on fasboot [may at first u get failed after first pic open the tool again and try again]
2- You will need ADB when u open the bootloader
If there is anything DM me
Click to expand...
Click to collapse
This man is sooooo Goooood Thankyou soomuch For helping me and other people out there. This man will give it his time to help and fix my iisue he's actually handsome tho. So i recommend this guy if you want some solution for your problem just direct him. This man is sooooo kind it will make your day much happier hahaha
RZaR2001 said:
Before starting you need to :
1- download unbirck tool (RM3, RM3S);
2- download TWRP for A11 (for both of them)
3-download minimal adb and fastboot tool ADB
4- Buy OTG Link
The Steps1- You should install the ADB
2- Go to fastboot mode then to Boot to edload (by using volume down) then press power the screen will be black screen
3- Open the unbirck tool and follow the steps which the developer put in his note
4- if the phone didn't open and still giving (device is corrupt) go to again to fastboot mode then open the TWRP tool (its in cn language so may be weird for you) and will explain the steps in pics
5- when it finishes go down in fastboot mode to reach to recovery mode press on power it will take u to TWRP (may u found it in cn language so follow that video to make it in eng)
6- Plug ur flash drive in ur pc and put the rom on it RM3S , RM3
7- Connect ur phone with that flash drive then in TWRP [ Mount > Select Storage > USB-CTG ] then go back and join [Install > the rom which u downloaded] after that restart the phone
Note : 1- While installing TWRP you should be in fastboot mode only, don't go to boot edload ... Sec pic u press on fasboot [may at first u get failed after first pic open the tool again and try again]
2- You will need ADB when u open the bootloader
If there is anything DM me
Click to expand...
Click to collapse
after flash v3.30 device logo restart only
[email protected] -help me bro
RZaR2001 said:
Before starting you need to :
1- download unbirck tool (RM3, RM3S);
2- download TWRP for A11 (for both of them)
3-download minimal adb and fastboot tool ADB
4- Buy OTG Link
The Steps1- You should install the ADB
2- Go to fastboot mode then to Boot to edload (by using volume down) then press power the screen will be black screen
3- Open the unbirck tool and follow the steps which the developer put in his note
4- if the phone didn't open and still giving (device is corrupt) go to again to fastboot mode then open the TWRP tool (its in cn language so may be weird for you) and will explain the steps in pics
5- when it finishes go down in fastboot mode to reach to recovery mode press on power it will take u to TWRP (may u found it in cn language so follow that video to make it in eng)
6- Plug ur flash drive in ur pc and put the rom on it RM3S , RM3
7- Connect ur phone with that flash drive then in TWRP [ Mount > Select Storage > USB-CTG ] then go back and join [Install > the rom which u downloaded] after that restart the phone
Note : 1- While installing TWRP you should be in fastboot mode only, don't go to boot edload ... Sec pic u press on fasboot [may at first u get failed after first pic open the tool again and try again]
2- You will need ADB when u open the bootloader
If there is anything DM me
Click to expand...
Click to collapse
this man is really awsome for red magic device. now im on v5.11 and using gapps. thnx again
RZaR2001 said:
Before starting you need to :
1- download unbirck tool (RM3, RM3S);
2- download TWRP for A11 (for both of them)
3-download minimal adb and fastboot tool ADB
4- Buy OTG Link
The Steps1- You should install the ADB
2- Go to fastboot mode then to Boot to edload (by using volume down) then press power the screen will be black screen
3- Open the unbirck tool and follow the steps which the developer put in his note
4- if the phone didn't open and still giving (device is corrupt) go to again to fastboot mode then open the TWRP tool (its in cn language so may be weird for you) and will explain the steps in pics
5- when it finishes go down in fastboot mode to reach to recovery mode press on power it will take u to TWRP (may u found it in cn language so follow that video to make it in eng)
6- Plug ur flash drive in ur pc and put the rom on it RM3S , RM3
7- Connect ur phone with that flash drive then in TWRP [ Mount > Select Storage > USB-CTG ] then go back and join [Install > the rom which u downloaded] after that restart the phone
Note : 1- While installing TWRP you should be in fastboot mode only, don't go to boot edload ... Sec pic u press on fasboot [may at first u get failed after first pic open the tool again and try again]
2- You will need ADB when u open the bootloader
If there is anything DM me
Click to expand...
Click to collapse
Hi
I habe redmagic 3 stuck at device corrupted
I have tried almost every guide i could
Its still same
I tried your way and now it keeos booting back to fastboot
Even if i choose reboot to recovery or reboot to system after i use twrp tool
Any suggestions?
hafizrehman1992 said:
Hi
I habe redmagic 3 stuck at device corrupted
I have tried almost every guide i could
Its still same
I tried your way and now it keeos booting back to fastboot
Even if i choose reboot to recovery or reboot to system after i use twrp tool
Any suggestions?
Click to expand...
Click to collapse
Pm me
RZaR2001 said:
Before starting you need to :
1- download unbirck tool (RM3, RM3S);
2- download TWRP for A11 (for both of them)
3-download minimal adb and fastboot tool ADB
4- Buy OTG Link
The Steps1- You should install the ADB
2- Go to fastboot mode then to Boot to edload (by using volume down) then press power the screen will be black screen
3- Open the unbirck tool and follow the steps which the developer put in his note
4- if the phone didn't open and still giving (device is corrupt) go to again to fastboot mode then open the TWRP tool (its in cn language so may be weird for you) and will explain the steps in pics
5- when it finishes go down in fastboot mode to reach to recovery mode press on power it will take u to TWRP (may u found it in cn language so follow that video to make it in eng)
6- Plug ur flash drive in ur pc and put the rom on it RM3S , RM3
7- Connect ur phone with that flash drive then in TWRP [ Mount > Select Storage > USB-CTG ] then go back and join [Install > the rom which u downloaded] after that restart the phone
Note : 1- While installing TWRP you should be in fastboot mode only, don't go to boot edload ... Sec pic u press on fasboot [may at first u get failed after first pic open the tool again and try again]
2- You will need ADB when u open the bootloader
If there is anything DM me
Click to expand...
Click to collapse
OMG guys
this guy in an angel
within sometime of me posting here for help
he Contacted me through pm
and then we started conversation through whatsapp
he took details of how i got myself stuck
and then through anydesk
downloaded some files and viola
my device is running again
on cn version 5.11 android 11
rooted and with gapps installed
i can't thank you enough brother
god bless you
please guys
give a like to this post
and applaud for his generosity that when i offered to pay him he said he is gona do it for free
Thanks a lot
i wud be forever your thankful
lotz of love n prayer from me❤♥♥♥♥♥♥♥
hafizrehman1992 said:
OMG guys
this guy in an angel
within sometime of me posting here for help
he Contacted me through pm
and then we started conversation through whatsapp
he took details of how i got myself stuck
and then through anydesk
downloaded some files and viola
my device is running again
on cn version 5.11 android 11
rooted and with gapps installed
i can't thank you enough brother
god bless you
please guys
give a like to this post
and applaud for his generosity that when i offered to pay him he said he is gona do it for free
Thanks a lot
i wud be forever your thankful
lotz of love n prayer from me❤♥♥♥♥♥♥♥
Click to expand...
Click to collapse
i want to do the exact same solution but i have bricked my rm3 with a downgrade. now my best problema is that pc not recognized the Phone on fastboot. i'm demoralized...
fedezio said:
i want to do the exact same solution but i have bricked my rm3 with a downgrade. now my best problema is that pc not recognized the Phone on fastboot. i'm demoralized...
Click to expand...
Click to collapse
I also had that issue and i fixed it recently,
Just go to a mobile shop tell them to try to unlock bootloader step while connected to a box like miracle, ultimate where any of red magic series phone available.
After that the result got failed but phone starting recognizing in fastboot mode.
Thnx me later.
Thank you for your enthusiastic help. My phone came back to life
Bro around 15-20 days back I was on global rom, as it was not receiving any update lately thought to install cn android 11 rom. After installing the rom I was unable to find any twrp for it so, I downgraded it to android 10 cn rom, but my phone got bricked. I thought there might be some issue with recovery so I did a fresh install following:
Using cn android 11 rom
Using brioli
Extracted the sdat2img.py system.transfer.list system.new.dat system.img
fastboot oem nubia_unlock NUBIA_NX629J
Fastboot erase boot
Fastboot erase recovery
Fastboot erase system
Fastboot erase userdata
Fastboot erase cache
Fastboot erase data
fastboot erase system
fastboot erase modem
fastboot erase dsp
fastboot erase vbmeta
fastboot erase dtbo
fastboot flash parameter parameter.img
fastboot reboot bootloader
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash modem NON-HLOS.bin
fastboot flash dtbo dtbo.img
fastboot flash dsp dspso.bin
fastboot flash vbmeta vbmeta.img
fastboot flash -S 100M system system.img
fastboot reboot
It showed device corrupt again
I tried unbrick tool and the twrp you uploaded.
But after installing the twrp, when I try to reboot to recovery, it reboots in fastboot again.
I have tried at least 10-11 times with the above process but no luck.
Please help me out bro this is my only phone and we don't have a service center here.
Best regards,
Dibyank
Dibyank said:
Bro around 15-20 days back I was on global rom, as it was not receiving any update lately thought to install cn android 11 rom. After installing the rom I was unable to find any twrp for it so, I downgraded it to android 10 cn rom, but my phone got bricked. I thought there might be some issue with recovery so I did a fresh install following:
Using cn android 11 rom
Using brioli
Extracted the sdat2img.py system.transfer.list system.new.dat system.img
fastboot oem nubia_unlock NUBIA_NX629J
Fastboot erase boot
Fastboot erase recovery
Fastboot erase system
Fastboot erase userdata
Fastboot erase cache
Fastboot erase data
fastboot erase system
fastboot erase modem
fastboot erase dsp
fastboot erase vbmeta
fastboot erase dtbo
fastboot flash parameter parameter.img
fastboot reboot bootloader
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash modem NON-HLOS.bin
fastboot flash dtbo dtbo.img
fastboot flash dsp dspso.bin
fastboot flash vbmeta vbmeta.img
fastboot flash -S 100M system system.img
fastboot reboot
It showed device corrupt again
I tried unbrick tool and the twrp you uploaded.
But after installing the twrp, when I try to reboot to recovery, it reboots in fastboot again.
I have tried at least 10-11 times with the above process but no luck.
Please help me out bro this is my only phone and we don't have a service center here.
Best regards,
Dibyank
Click to expand...
Click to collapse
Pm me
[AIO Guide] Bootloader unlocking, Root ,Twrp , Custom Rom & Stock Firmware] NOTE :unlocking bootloader wipe your data
Root at your own risk
I am not responsible for any data loss or brick
# Twrp recovery for hot 9
Device- Infinix Hot 9
Model & Variant :
1: X655C-H6211ABKG-Q-OP
1.Bootloader Unlocking Guide:
1. Download & install ADB driver
2.Enable devloper mode by taping on Build verson(setting->my phone) then enable Oem Unlock & usb debugging from (settings->System->Devloper option)
3.Now connect device & open ADB path & run cmd
command: ADB devices
then reboot to bootloader
command: ADB reboot bootloader
4. unlock bootloader
command: fastboot flashing unlock the phone will ask to confirm
5. now reboot to system
command:fastboot reboot
If you are stuck waiting for the device screen
2. TWRP [Official]
https://forum.xda-developers.com/t/recovery-for-infinix-hot-9.4472895/
3. Root:
## Root zip link: Magisk-v21.0.zip
## Unroot link : Magisk-uninstaller-20201003.zip
4. Orange state disabler:
Flashing guide & zip file
Click Wipe →Format Data → Yes → Press Enter.
Then Click Reboot → Recovery (Reboot to Recovery ).
After this, TWRP Recovery Mode will be installed on your phone
Link::Orange disabler.zip
5. Gsi Rom / Custom Rom Install guide & link:
https://forum.xda-developers.com/t/custom-rom-dynamic-partition-arm64-ab.4379341/
6. Phone Hard Brick fix / Flashing guide & tools :
https://forum.xda-developers.com/t/phone-soft-brick-phone-on-off-poblem-tecno-device.4378501/
6.1. Stock Firmware Files / Flash file
## Download link :
1.X655C-H6211ABKG-Q-OP-210704V303
Hit Thanks If You Liked My Work
Hey, the recovery just stuck at the TWRP logo screen.
I'm stuck with < waiting for any device > when I enter fastboot flashing unlock command
Dkwbsn said:
I'm stuck with < waiting for any device > when I enter fastboot flashing unlock command
Click to expand...
Click to collapse
if you are using windows OS check your USB drivers
enable USB Debugging from developers options and make sure your device is listed in results of CLI command USB devices otherwise may the problem is the USB Cable