Hi there i'm in a situation like the title says;To rescue all my Data is there a command where i can those back?under ubuntu software with fastboot or adb is that possible?
MSM does it work under linux as well?I stuck at logo loop just because i wanted to upgrade the Oxygen after 2 month of rooted the devices with kali linux on it,never upgrade it.
Can someone suggest me the best SO for the OnePLus and how to accomplish it?
Thanks in advanced
Related
So I used MTK tools to create a custom cwm for my Verizon ellipsis 7 and it all went smooth until I accidently flashed CM for the wrong decide and now it's stuck in a loop going no further than the initial Android boot screen. It will not connect to the computer in any way I'm guessing because it's looping before the system actually boots? If anyone could be of any help I would greatly appreciate it. There are a few games I can't play on my phone and I'm dying to get this tablet back going
No one?
I can't get this thing to boot into anything. Does anyone know of a windows application that you can start, plug the tablet in and then start the tablet and it force boot into bootloader mode or anything at all?
Hi guys, i'm desperately writing this thread after asking for help in the Oppo Community forum without no luck.
I know that this is for R7 Plus but i hope that someone could help me with my beloved R7s.
Months ago i've succefully installed the Project Spectrum ROM and it worked fine until few weeks ago when i noticed a random system slow down, maybe after an automatic app update.
I tryed to uninstall few apps and reboot the phone several times but with no luck.
So i decided to wipe it and reinstall the Color OS following the walkthrough but something went wrong and now my OPPO R7s is in a strange bootloop without recovery and fastboot.
The strange things are these:
- if I press the power button all I can see is the OPPO Logo and the loading dots in slow-mo
- if i connect it directly to a Windows PC it is recognized as a generic "Android" terminal.
- if i connect it to a Windows PC pressing and holding POWER + VOLUME DOWN + VOLUME UP it's recognized as a QHSUSB_BULK
I'm not a noob, neither an engineer, but i've a bit of familiarity with computers and similar things so i've tried to follow this guide:
http://community.oppo.com/en/forum.php?mod=viewthread&tid=48654
Downloading this service repair rom : https://drive.google.com/file/d/0BybDE_sPI3b5cmgtU05fbXNobVU/view (from this related discussion : http://forum.xda-developers.com/r7-plus/help/r7s-service-romqpst-unbrick-t3493377)
Following the guide, when i try to execute MSM8x39Downloadtool.exe selecting the phone model (i've three choices xx080_32G, xx081_32G, xx082_32G - and i don't know which one is the correct one) the phone is not recognized as COM CONNECTED in none of the ports. If I also do the verification, clicking on the top right button, it shows FAILED on system.img file.
Can that be the problem?
I'm stuck guys and i don't know what to do.
Any help will be better then a christmas present
Thanks in advance!!
A.
Download this rom and place it in the internal sd and flash to downgrade from spectrum
https://s3.amazonaws.com/public.opp...d_ColorOS/Specified_ColorOS_R7sf_full_009.zip
kishd said:
Download this rom and place it in the internal sd and flash to downgrade from spectrum
https://s3.amazonaws.com/public.opp...d_ColorOS/Specified_ColorOS_R7sf_full_009.zip
Click to expand...
Click to collapse
Thanks kishd i'll give this a try!
The only thing i'm bit worried about is how to flash from the internal sd without recovery mode and fastboot...
I'll keep you updated!:good:
any news?did you manage to fix?
hello guys
i have a problem with my oppo RS7
it has a hard bricked and stucked on booting and booting..... I only have a MacBook Pro and not windows
is anyone over there that knows exactly how to unbrick it using a Mac ?!
After rooting this tablet I immediately started having WiFi issues, plus each boot or power cycle would trigger a factory erase. By placing my apks in the preinstall folder all of my apps would be replaced each time, but personal data and setup were deleted.
Due to this I started using Kernal Auditor to soft reboot. Somehow I managed to hit " reboot to boot loader " and now my tab is stuck dead on first android logo screen. I downloaded the Phoenix suite and a ROM that was supposed to work but Phoenix refuses to flash it.
Astar_y3 KVT49L A33 realtek WiFi etc... It was a release key but I would be happy with any firmware that would work for this. I am currently trying to I stall a minimal like ux on my xp PC and will be better set to communicate with the phone.
I was also wondering I'd it would be possible to load a Linux distro on this tablet????
Ky2T said:
After rooting this tablet I immediately started having WiFi issues, plus each boot or power cycle would trigger a factory erase. By placing my apks in the preinstall folder all of my apps would be replaced each time, but personal data and setup were deleted.
Due to this I started using Kernal Auditor to soft reboot. Somehow I managed to hit " reboot to boot loader " and now my tab is stuck dead on first android logo screen. I downloaded the Phoenix suite and a ROM that was supposed to work but Phoenix refuses to flash it.
Astar_y3 KVT49L A33 realtek WiFi etc... It was a release key but I would be happy with any firmware that would work for this. I am currently trying to I stall a minimal like ux on my xp PC and will be better set to communicate with the phone.
I was also wondering I'd it would be possible to load a Linux distro on this tablet????
Click to expand...
Click to collapse
Greetings and welcome to assist. Unfortunately I can't find any information for your device on xda. It is possible to run linux on most tablets but each device is different. There is a guide for a similar device here
https://forum.xda-developers.com/th...dd-gui-desktop-linux-to-aol-base-yt2-t3244681
Good Luck
Sawdoctor
I can start it up and all but WiFi is grey and won't turn on.
Is there a way to start from 0 and so is there a guide anywhere?
How do i install the latest stock img and where do i get it and where do i find a patch of latest img to then root my oneplus 8t?
I am just lost and i've been at it for 8 hrs i just want this crap to be over with.
Just got huge information overload going over dozens of guides all saying and mentioning different things...
I just need a plain simply guide with links
please someone just help me i beg you guys.
edit: i did a fastboot flash boot boot.img
and now it is just booting and loading into safe mode. All i see is safe mode bottom left and nothing else on the screen.
please anyone help me before i brick this phone with my head literally.
I own a "OnePlus 8T SIM Free Lunar Silver 12 GB RAM + 256 GB Storage"
When i try doing the MsmDownloadTool i keep getting "Automatic detection of DDR failed"
Update:
When i try doing the MsmDownloadTool i keep getting "Automatic detection of DDR failed"
Can anyone help me to just reset this device entirely. As if it just came from the factory itself. MSMDownloadTool is not working for some reason...
Brand: OnePlus
Model: KB2005
Model Name: 8T
How do i fully unbrick my phone? Which MSM version or tool or android or whatever do i use?
Please please please somebody help me i am going crazy over this.
I unbricked my phone and it is back to STOCK OS. CLOSE THREAD please.
Need some help from master... I brick my phone after adb sideload to install pixel experience. Now it stuck in edl mode. Last stock rom already flash to latest Android 12 retcn.
zackkaizer said:
Need some help from master... I brick my phone after adb sideload to install pixel experience. Now it stuck in edl mode. Last stock rom already flash to latest Android 12 retcn.
Click to expand...
Click to collapse
To whoever facing this problem. To be specifically, after I bricked my phone, I tried to blankflash but it give me error like "Sahara greet device" or anything like this. So after a while I'm searching for solution I found the way to avoid this kind of error in xda forum for another moto device... To avoid u need to hold down volume down button + power button at the same time run for blankflash.bat. And it works... Hope it can help u guys who facing this type of hardbrick... Cheersss...