So I used MTK tools to create a custom cwm for my Verizon ellipsis 7 and it all went smooth until I accidently flashed CM for the wrong decide and now it's stuck in a loop going no further than the initial Android boot screen. It will not connect to the computer in any way I'm guessing because it's looping before the system actually boots? If anyone could be of any help I would greatly appreciate it. There are a few games I can't play on my phone and I'm dying to get this tablet back going
No one?
I can't get this thing to boot into anything. Does anyone know of a windows application that you can start, plug the tablet in and then start the tablet and it force boot into bootloader mode or anything at all?
Related
I have an AllWinner A10 based tablet that started working weird about a month ago - when the display was on there was no sound and to get the sound you had to turn off the display. I tried to fix it by flashing a custom ROM without understanding the process thoroughly. Long story short, I think I may have bricked it I believe the last thing I did was to install CWM-recovery-5.5.0.4.img through LiveSuit. Now I get only a blue Android logo at startup and nothing more. I have tried installing the stock ROM back but I always get this error in LiveSuit - ".PnpFelIn:invalid ID"
I am attaching a shot of the logo that comes up, hoping that some one will recognize what the logo means, and more importantly, if it's possible to recover my tablet from that point ?
Any pointers are very welcome at this stage.
Thanks
Hi
Any luck sorting this?
I have same error when using livesuit, and phoenixusbpro, ive got the natpc m009s with forgotten pincode, have got image file but can't install it, recovery mode just shows a dead android with red triangle,nothing else happens. Android Multi Tools v1.02b gsmforum gives an error of no files in the tablet so i can't use that either, tried .zip files on sd card too, nothing. tried 3 cables 2 computers with different operating systems.
Any help from anyone much appreciated.
Hi all,
My zte v987 is rooted and got stuck on zte logo boot.
Before it got stuck i was playing around with an app called "freedom" that hacks in app purchases. I went into settings and turned on the "freecore" it rebooted itself after and got stuck on zte logo forever. I am able to go into recovery mode but i dont have custom recovery installed i also dont have a backup of my stock rom or any kind of backup. I am clueless about flashing so i will really need a step by step instruction. I also tried resseting my phone back to factory settings but nothing happened. I also read some threads about flashing recovery using adb and fastboot but since im a noob on android i turned off usb debugging mode(I dont know if its needed) before this all happened and i dont know what to do now. I need help
Thanks in advance
Hey guys, I've ran into a problem here maybe you guys can help me out. An update for my phone came today I downloaded it. After I installed it the device tried to restart as it should. But the phone wasn't able to boot. There was a USB logo on the screen which just came for a fraction of a second and the phone just powered off again. I was able to open Droidboot I tried recovery, factory reset but after I selected any option the phone had to restart and the USB logo came as I mentioned before. My device is rooted and it's running Android 4.4.2 KitKat. Any help would be greatly appreciated . Please help me. :crying:
CAL1BER said:
Hey guys, I've ran into a problem here maybe you guys can help me out. An update for my phone came today I downloaded it. After I installed it the device tried to restart as it should. But the phone wasn't able to boot. There was a USB logo on the screen which just came for a fraction of a second and the phone just powered off again. I was able to open Droidboot I tried recovery, factory reset but after I selected any option the phone had to restart and the USB logo came as I mentioned before. My device is rooted and it's running Android 4.4.2 KitKat. Any help would be greatly appreciated . Please help me. :crying:
Click to expand...
Click to collapse
try waiting for atleast 10 minutes coz first boot of new softwares takes a little time
else you can contact to manufacturer
I have come into possession of a Polaroid P900 tablet which says it is Powered by Android, however, when turned on it never progresses past the boot screen. The model number on the back of the tablet is P900 and the build number is BN01.01.006.076.01.
The battery seems to charge fine and I can boot the tablet into recovery mode, in recovery mode the model number, or perhaps firmware revision number, is P900_20141216. I have tried the factory reset option to no avail.
The bizarre thing is I can't seem to find any information on this tablet online, apart from a copy of the really basic Quick Start Guide on the official website. There seem to be no firmware images or Android updates I could attempt to flash the tablet with to try to fix this boot issue.
Does anyone know of any resources I can use to fix this booting issue?
Alternately, if this is not an appropriate forum, does anyone know any other resources for hacking these tablets?
This is the first Android device ever in my possession so I am at a loss as to where to go or what to do at this point!
Thanks for any advice or suggestions you may be able to provide!
I've been trying to root my phone for the last few days, everything just seems to be going badly.
I was finally able to unlock the bootloader, and i wasn't able to flash TWRP
after trying to get it to work and faffing around in recovery. I some how have got my phone in an endless loop. But not just an endless loop, but after the phone logo comes up, my phone's screen goes all glitchy and crazy with loads of colour. I can go into fastboot mode all ok, but now i can't access recovery mode anymore it's the same as normal mode.
I have no idea what's going on
i can't flash anything, when i do i get the message USB Transferring ... USB Transmission OK
Hi !
This looks like a soft brick but can you tell us more about your device ( model , software ) ?
Thank you
It's a BLU Vivo 6. it runs android marshmallow
AHappyLittleFishy said:
It's a BLU Vivo 6. it runs android marshmallow
Click to expand...
Click to collapse
Hi !
Some devices just can`t be unlocked without a prover support from the manufacturer
You can search for more on Google and wait for development , your case is far from unique
I see that you have alredy posted same issue here
https://forum.xda-developers.com/an...oot-device-t3546400/post70765622#post70765622
Thread closed