I have come into possession of a Polaroid P900 tablet which says it is Powered by Android, however, when turned on it never progresses past the boot screen. The model number on the back of the tablet is P900 and the build number is BN01.01.006.076.01.
The battery seems to charge fine and I can boot the tablet into recovery mode, in recovery mode the model number, or perhaps firmware revision number, is P900_20141216. I have tried the factory reset option to no avail.
The bizarre thing is I can't seem to find any information on this tablet online, apart from a copy of the really basic Quick Start Guide on the official website. There seem to be no firmware images or Android updates I could attempt to flash the tablet with to try to fix this boot issue.
Does anyone know of any resources I can use to fix this booting issue?
Alternately, if this is not an appropriate forum, does anyone know any other resources for hacking these tablets?
This is the first Android device ever in my possession so I am at a loss as to where to go or what to do at this point!
Thanks for any advice or suggestions you may be able to provide!
Related
I have an AllWinner A10 based tablet that started working weird about a month ago - when the display was on there was no sound and to get the sound you had to turn off the display. I tried to fix it by flashing a custom ROM without understanding the process thoroughly. Long story short, I think I may have bricked it I believe the last thing I did was to install CWM-recovery-5.5.0.4.img through LiveSuit. Now I get only a blue Android logo at startup and nothing more. I have tried installing the stock ROM back but I always get this error in LiveSuit - ".PnpFelIn:invalid ID"
I am attaching a shot of the logo that comes up, hoping that some one will recognize what the logo means, and more importantly, if it's possible to recover my tablet from that point ?
Any pointers are very welcome at this stage.
Thanks
Hi
Any luck sorting this?
I have same error when using livesuit, and phoenixusbpro, ive got the natpc m009s with forgotten pincode, have got image file but can't install it, recovery mode just shows a dead android with red triangle,nothing else happens. Android Multi Tools v1.02b gsmforum gives an error of no files in the tablet so i can't use that either, tried .zip files on sd card too, nothing. tried 3 cables 2 computers with different operating systems.
Any help from anyone much appreciated.
BRICKED 7inch Irola Tablet...PLEASE HELP
I am in DIRE need of some help with my tablet. I received this irola dx752 tablet bricked and cannot fix it for the life of me. I am able to hold power and volume up and get into recovery system version 4.2.01. I Have tried a factory reset and a wipe system cache and the tablet just reboots to the green robot with and exclamation mark. If I press volume up, it brings me back to the system recovery. Now i am not very versed in ADB but I tried to sideload just about every firmware I could find for an a13 allwinner a8 cortex 7inch tablet, since the irola website has taken down its firmware. Also, fastboot will not work on this tablet whatsoever (it just says waiting for device) when i enter any command. I have never seen this tablet boot into a rom of any kind and therefore cannot tell if USB Debugging was ever enabled. I also Have tried different drivers but the one that seem to hold is the Android ADB Interface. CAN ANYONE PLEASE GIVE ME SOME SUGGESTIONS OR SOME HELP? It would be greatly appreciated. Thank you.
Hey guys I'm new here and I found myself with a situation. Sorry if this isn't the right area to post this.
So my friend has this tablet: Storex Ezee Tab 74D14-S. And it got bricked, stuck on logo screen.He doesn't have warranty. Tried hard reset, power volume +/-, got into recovery mode and wiped cache,factory reset all that stuff. Yet it's still stuck on logo screen. So I went searching for firmware to install the OS. I found this link but I can't post it due to not having permission yet, you can find it by searching "Storex Ezee Tab 74D14-S firmware" first link, first PDF and it has 2 links. So I downloaded the firmware and the program to try it out. However to use this program, called phoenix I need to have USB Debugged on, and I can't do that obviously. Went searching for custom ROM's but I didn't find anything for this tablet. Also I'm no expert on rom's and I don't wanna screw this even more.
So I'm opened up for suggestions guys. Thanks.
EDIT: Is there a way to reinstall firmware from recovery mode? I can seem to get into recovery mode, but it can't be charging or else it doesn't work, although it's a bit buggy can't go up only down and says "No command".
UP
Still need help
UP still need help guys
Hi there,
I am using a Q8H 2014 02 20 A23 Allwinter tablet. This tablet has pretty bad battery issues so I have looked to swap the battery with one from my older tablet (this doesn't fit its far to big) however my issue before and after replacing the battery is the OS would constantly reboot as soon as I got to the homescreen I litterally get 1minute into it then it reboots again. Have already tried to factory reset and it sits there with the dead android logo guy and does nothing.
I am wanting to know if this indeed a OS issue if so how can I fix it I have had a search on the net trying to find the ROM file for this model but I am unable to find what I require, I saw when it goes into recovery that I can grab a rom via SD card if I am not mistaken.
Is it possible for someone to help me with the rom file I require and able to tell me if this will fix my issue??
Thanks for your help in advance.
Regards,
Time Bandit
Apologies if I have put this in the wrong place.
Hello elders. I hope that I'm in the right session for my ask. I have tried to update my tecno 7c android 5.0 based tablet (that I've bought, just a month ago) cause it proposed it to me in the settings, software update option. Everything went well till the end of the download. After that, my tablet rebooted correctly and came to the android home screen. But each time I put any SIM card inside, I always have this message: "com.phone stopped working". I've tried to perform a full reset of the phone through the stock recovery but I don't even have access to recovery now. The phone is MTK 6582 processor based tablet. I've tried to read on internet to see if there's a way to fix it but the one I've found explained that I need a same working tablet whose backup file I'll flash on the bricked one through SP FlashTool to revive it but I have nobody having such tablet. Help please if you have solutionq for me. Very urgent. My tablet, the only on I have! Thanks in advance.
Hello! Nobody to answer me?