[ROM][OFFICIAL] LineageOS 17.1 weeklies for Nexus 7 2013 (flox)

[ROM][OFFICIAL] LineageOS 17.1 weeklies for Nexus 7 2013 (flox) - Nexus 7 (2013) Android Development

So, why flox?
We use name flox to show the difference between installation method in new versions of LineageOS on this device, which is not compatible with older versions.
TWRP
If TWRP is a convenient installation method for you, then you can download and use my recovery build.

flox의 ROM은 flo, deb 공통입니까 아니면 둘 중 하나입니까? 영어를 몰라서 영어를 못해요

그리고 deb, flo 및 flox 사이에 기능적 차이가 있습니까?

jun0713 said:
그리고 deb, flo 및 flox 사이에 기능적 차이가 있습니까?
Click to expand...
Click to collapse
if i translated correctly (내가 제대로 번역 한 경우):
flox = flo, debx = deb
flox, flo - Nexus 7 2013 Wi-Fi only
debx, deb - Nexus 7 2013 with LTE

[QUOTE = "ud4, 게시 : 84137359, 회원 : 5213841"]
내가 정확하게 번역 한 경우 (내가 제대로 번역 한 경우) :
flox = flo, debx = deb
flox, flo-Nexus 7 2013 Wi-Fi 전용
debx, deb-LTE 기반 Nexus 7 2013
[/인용문]
나는 그것에 대해 물었다. 감사합니다. 14.1에 비해 17.1은 얼마나 빠릅니까?

I am trying to switch from LineageOS 17.1 Unofficial version to flox version, but I fail. It shows ERROR 7 while installing. All I have to do is re-install the Unofficial version back.

[QUOTE = "gontera, 게시물 : 84140227, 회원 : 4333584"]
LineageOS 17.1 비공식 버전에서 flox 버전으로 전환하려고하는데 실패합니다. 설치하는 동안 오류 7이 표시됩니다. 내가해야 할 일은 비공식 버전을 다시 설치하는 것입니다.
[/Try reinstalling TWRP over 3.3.]

gontera said:
I am trying to switch from LineageOS 17.1 Unofficial version to flox version, but I fail. It shows ERROR 7 while installing. All I have to do is re-install the Unofficial version back.
Click to expand...
Click to collapse
lineage-17.1-20201214-nightly-flox(flo)-signed.zip
drive.google.com
Try this
This is the one with device verification disabled

few__ said:
Try this
This is the one with device verification disabled
Click to expand...
Click to collapse
Thank you very much. It works!

gontera said:
Thank you very much. It works!
Click to expand...
Click to collapse
Use official lineage recovery or twrp from second post

I tried flashing this build and nano gapps with lineage recovery and get error 21, then i reflashed ua twrp and flased it with succes. Then reboot bootloader and flashed lineage recovery. Booted into system and everything working flawless. Thanks for this build!

I'm stuck with installing an newer twrp or official recovery. In twrp 3.3.1.0 it says "Size of image is larger than target device", same error with fastboot. I tried the CROSS script, because i thought of a repartition error, but it fails after repartitioning and twrp fails again despite the repartitioning.
Ideas anybody?

I am trying to install your recovery. I want to do it from TWRP 3.0.2-0. However I get the error message shown in the picture. I have also tried to install the ROM using the same method, it has not been possible either, I get error 7 and the indication that the ROM is flox and the device is flo

What custom kernels work with this rom? Just looking to overclock the device for performance.

jaucar said:
I am trying to install your recovery. I want to do it from TWRP 3.0.2-0. However I get the error message shown in the picture. I have also tried to install the ROM using the same method, it has not been possible either, I get error 7 and the indication that the ROM is flox and the device is flo
Click to expand...
Click to collapse
use repartition guide from flox wiki page

ud4 said:
Use official lineage recovery or twrp from second post
Click to expand...
Click to collapse
I update recovery with what you've mentioned, then install LineageOS flox again. Works like a charm.
Thank you for your hard work!

Thank you very much for all the work done and the time spent. Finally I have managed to install the recovery and the rom. The problem was in the partitioning method used, I was using Followmsi's and Clamor's was needed. I have a question: Is this rom updated automatically from the system? Do you have to do it manually? Thanks a lot

Lineage를 업데이트하려고하는데 파일이 다운로드되어 설치할 수 없습니다.

ud4 said:
TWRP
If TWRP is a convenient installation method for you, then you can download and use my recovery build.
Click to expand...
Click to collapse
Hi, I'm loving Lineage 17.1 on my flo!
I followed the Lineage installation guide and had some trouble with installation process, like not being able to install opengapps with the lineage recovery, but it was fixed simply by using TWRP. The problem is that I used the official TWRP build for that and later on realized there was this modified version.
Now, I'm wondering, what's the difference between the official TWRP for flo and this modified one for flox? Could I have silently broken something in my installation by using the official flo TWRP?

Related

[ROM][UNOFFICIAL] LineageOS 14.1 & LineageOS 15.1

Disclaimer:
Not responsible for any injuries you do to yourself or your device being damaged caused by this ROM.
Big thanks goes to @Steel01 for all the hard work an the Sources.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions :
Download the latest build and optional gapps(arm for 14.1 & 15.1)
Reboot to recovery
Flash the latest build and gapps
Reboot
Downloads :
Builds : https://androidfilehost.com/?w=files&flid=296557
Root addon : https://download.lineageos.org/extras
Google Apps : http://opengapps.org/
Firmware Update : N/Stock 5.0
Known Issues
Hardware video decoding does not work (only 15.1)
WIFI works, but there are problems with the security function PMF. If this is disabled, everything works. (wiki) (only 14.1)
Credits to:
Steel01
Source Code: https://github.com/LineageOS
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
I publish here the LineageOS Builds 14.1 & 15.1. I create them with the Docker Image from MicroG, but without any MicroG components. Therefore GApps can be installed without any problems.
I'm only testing the 14.1 builds, as I'm currently using them.

Info: the frist 15.1 was tested by me, but in the future iam only testing 14.1 builds

Thank you.
Sent from my SHIELD Tablet

I assume wipe is required if going from official build to this build?

bland.life said:
I assume wipe is required if going from official build to this build?
Click to expand...
Click to collapse
If you go from 15.1=> 15.1 or from 14.1=>14.1 it should not be necessary.

The-Saint2k said:
Info: the frist 15.1 was tested by me, but in the future iam only testing 14.1 builds
Click to expand...
Click to collapse
What are the benefits you find in 14.1 as opposed to 15.1 on the shield tablet?

zagzag99 said:
What are the benefits you find in 14.1 as opposed to 15.1 on the shield tablet?
Click to expand...
Click to collapse
In 15.1 HWC is corrupt, so some apps are crashing( like netflix) Steel01 is hopping that he can fix it in Android Q.
In 14.1 all is great.

The-Saint2k said:
If you go from 15.1=> 15.1 or from 14.1=>14.1 it should not be necessary.
Click to expand...
Click to collapse
Ok, I just tried installing your build over the official build 15.1=> 15.1.
It just bootloops, Nvidia logo -> LOS load screen -> Nvidia logo -> TWRP -> Reboot from TWRP -> Nvidia logo -> LOS load screen -> Nvidia logo -> TWRP -... loop

bland.life said:
Ok, I just tried installing your build over the official build 15.1=> 15.1.
It just bootloops, Nvidia logo -> LOS load screen -> Nvidia logo -> TWRP -> Reboot from TWRP -> Nvidia logo -> LOS load screen -> Nvidia logo -> TWRP -... loop
Click to expand...
Click to collapse
Me too... Will try a fresh flash later...

I'd suggest wiping system but keeping data partition and then install the los 15.1 of your choice...

I have a feeling there might be a problem with my builds.
Has anyone done a dirty flash with gapps without any problems? (I only did this without gapps times and otherwise I always had to do a full wipe due to various tests anyway)
If there should be problems I would take the builds offline and test it completely by myself.

I did a clean flash for 14 with the exception of wiping internal storage and had a flawless installation.
Sent from my LG-H918 using Tapatalk

The-Saint2k said:
I have a feeling there might be a problem with my builds.
Has anyone done a dirty flash with gapps without any problems? (I only did this without gapps times and otherwise I always had to do a full wipe due to various tests anyway)
If there should be problems I would take the builds offline and test it completely by myself.
Click to expand...
Click to collapse
I wouldn't take them offline for that really...
Like I said if only system is wiped, users will still keep all their data and app settings even fingerprint data and the likes... I would 'ever suggest a dirty flash between different builds of the same os even of they are both lineage os... Sometimes the device related adaptations are different and drivers conflict or the likes can arise because of this... At least that's how I experience it

Lineage 15.1 /w Magisk Installed.
Can't seem to get SafetyNet Check to work...
ctsProfile: False
basicIntergrity: True
Module: MagiskHide Props Config doesn't fix this issue. </3

VJmac15 said:
Lineage 15.1 /w Magisk Installed.
Can't seem to get SafetyNet Check to work...
ctsProfile: False
basicIntergrity: True
Module: MagiskHide Props Config doesn't fix this issue. </3
Click to expand...
Click to collapse
Which Magisk build? Magic hide enabled?
I've never seen this not working on latest builds

You can't go from official to unofficial builds or vice versa without wiping data due to signing key differences. Anyone coming off officials to this will have to wipe and start over. Just like when I release unofficial builds myself.

MrBlubke said:
Which Magisk build? Magic hide enabled?
I've never seen this not working on latest builds
Click to expand...
Click to collapse
Latest magisk
Magisk enabled
Fresh ROM Installed

Hello, everyone,
the August patch day is approaching, so I have now tested updating my builds extensively. I noticed that the 14.1 build is not updateable. It comes, as already described once, to an ERROR 7 error in TWRP.
The 15.1 builds do not seem to be affected. To control this I created a new 15.1 build for testing.
Currently I am planning to change the build image for the 14.1 version to eliminate the bug.
LineageOs15.1 Test Build
Please let us know if it works. And importent is to test it with dirty flash.

as already announced, I changed the build environment for LineageOS 14.1 because of the error " Error 7". I tried several workarounds (adaptation of "update-script" etc), but without success. I deleted the old 14.1 builds and replaced them with the new docker image from jfloff. With this I created two images on different days and could update them without any problems. Unfortunately you have to do Full Wipe otherwise you get Error 7 again, at least with me.

Maybe I'm saying something absurd but the other day I watched Avengers Endgame with MX Player and could use HW+ mode. As far as I know this mode uses mx own framework and the video played smoothly without major battery drain. Does this mean that at least with mx player hw acceleration is working?

[ROM]-[13]-[NAIRO]-LineageOS-20-[OFFICIAL]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Motorola G 5G Plus/ Motorola One G 5G
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Introduction:
This is the Official Lineage OS 20 thread for the Motorola G 5G Plus/Motorola One 5G, codename Nairo.Join our Motorola G 5G Plus / Motorola One 5G Development Telegram Group!
LINKS:
ROM/Recovery: LineageOS-20 - Latest Official BuildsMind The Gapps: DownloadMagisk: MagiskFactory Firmware: Stock Firmware MirrorCopy Partitions: copypartitions.zip
How to Install:
LineageOS Wiki
Contributors[/B]
erfanoabdi, SyberHexen, Jleeblanch
Source Code: https://github.com/LineageOS/
ROM OS Version: Android 13
ROM Kernel: Linux 4.19
Based On: LineageOS
Version Information
Status: Stable

reserved 1

reserved 2

Thanks alot.
What is not working?

I can't wait for a lineage os 19 I saw the source code for it and I know there is a pixel experience with Android 12 available

Hmmm... nairo-twrp-3.6.0_11.0_RC-1.0.img linked above boots, but no touchscreen (from V- + Power or CLI fastboot reboot bootloader). I have a twrp-3.5.0-1-nairo.img from a previous Arrow OS load that does... is that safe to use to load the Lineage OS?

Note to self: no, no you can't. Corrupt OS message from recovery after trying to reboot. Also storage appears encrypted still from "install Magisk" step, guess that should have been a warning. Sigh.
Flash back to stock again, sigh. At least that seems to recover everything.

we do really need a hero who can create a nairo twrp, this version boots with android 12 on nairo but touch doesnt work :c

Tommy0000 said:
we do really need a hero who can create a nairo twrp, this version boots with android 12 on nairo but touch doesnt work :c
Click to expand...
Click to collapse
wait a min or 2 for touch screen

1. is there any screen shots ?
2. what the step 04 does ?

Emerald_N8 said:
1. is there any screen shots ?
2. what the step 04 does ?
Click to expand...
Click to collapse
Step 4 will prevent you from bricking as it's common slot_b tends to be empty or not correctly setup on Motorola phones.
Esentially it copies the bootloader partitions from a -> b

Emerald_N8 said:
1. is there any screen shots ?
2. what the step 04 does ?
Click to expand...
Click to collapse
Step 4 will prevent you from bricking as it's common slot_b tends to be empty or not correctly setup on Motorola phones.
Esentially it copies the bootloader partitions from a -> b

wesleyvanneck12345678 said:
wait a min or 2 for touch screen
Click to expand...
Click to collapse
Hey wesley,
i'm currently trying to flash my motorola.
the touchscreen will not respond. i have waited for a coulple of minutes, but no avail.
are there any tricks to make it work?
best regards
EDIT :
My first try was TWRP-3.6.0_11.0_RC-1.0.img. This did not work
I've Downloaded "twrp 3.5.0", and i had to wait one or two minutes for the touchscreen to start work
TWRP 3.6.0 did not work for me.
EDIT2:
i was not able to flash the newest zip (03.24) on my "vanilla" phone but the first one worked well.
The 27.1.2022
Also Install the Pico gapps. i could not flash the nano package
best regards

bendedheadtube said:
Hey wesley,
i'm currently trying to flash my motorola.
the touchscreen will not respond. i have waited for a coulple of minutes, but no avail.
Click to expand...
Click to collapse
As a workaround I used a keyboard / trackpad combo via a 2.4 GHz dongle (china mini keyboard) and was able to use above linked TWRP 3.6.0_11.0_RC-1.0

bendedheadtube said:
Hey wesley,
i'm currently trying to flash my motorola.
the touchscreen will not respond. i have waited for a coulple of minutes, but no avail.
are there any tricks to make it work?
best regards
EDIT :
My first try was TWRP-3.6.0_11.0_RC-1.0.img. This did not work
I've Downloaded "twrp 3.5.0", and i had to wait one or two minutes for the touchscreen to start work
TWRP 3.6.0 did not work for me.
EDIT2:
i was not able to flash the newest zip (03.24) on my "vanilla" phone but the first one worked well.
The 27.1.2022
Also Install the Pico gapps. i could not flash the nano package
best regards
Click to expand...
Click to collapse
touch works for me after phew seconds on 3.6.0

The flash was succsessful to a lineage version. so the twrp is no longer a problem
I think my problem with (03.24) was a misunderstanding with slot A and slot B.
i can't change them within the lineageos bootloader.
i was able to get 3.24 running after a couple of tries (and factory resets)
one of the tries showed no mobile data available.
i was able to fix it with "factory resets" and reflashing until it worked again.
But then the gps was not working. a couple of satellites in view, but no in use.
until i found a note in my old google keep from 2016:
" fastboot erase modemst1 "
" fastboot erase modemst2 "
facepalm. so one of the factory resets was unnecessary.
so a small hint for all people :
1) wireless mouse is a good hint, for twrp 3.6.0
2) fastboot to erase the gps data, then it will work again.
3) pico gapps

can someone check if there is a wireless display option in cast setting on this custom rom ?
or can this custom rom mirror screen to a tv or mirror screen to a laptop (or a pc with a wifi dongle ) via project settings in windows 10 ?

Emerald_N8 said:
can someone check if there is a wireless display option in cast setting on this custom rom ?
or can this custom rom mirror screen to a tv or mirror screen to a laptop (or a pc with a wifi dongle ) via project settings in windows 10 ?
Click to expand...
Click to collapse
Sorry, i don't have devices to test your request.
Is this Rom still in development, or is the development in "freeze" because there is now an official lineageos rom
LineageOS Downloads
download.lineageos.org

bendedheadtube said:
Sorry, i don't have devices to test your request.
Is this Rom still in development, or is the development in "freeze" because there is now an official lineageos rom
LineageOS Downloads
download.lineageos.org
Click to expand...
Click to collapse
just compare the maintainers ;-)

justtogetit said:
just compare the maintainers ;-)
Click to expand...
Click to collapse
where too look for the maintainers name ?

[ROM][OFFICIAL] LineageOS 19 for Galaxy Note10/Note10+/Note10+ 5G Exynos

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 12, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions:
Follow the instructions on the wiki page for your device https://wiki.lineageos.org/devices/#samsung
Only the provided lineage recovery will be supported, using TWRP might result in a possible data loss!
Note: You may use Odin instead of Heimdall, for this you will need to rename the recovery image to recovery.img and pack it into a tar archive.
Downloads:
Builds: https://download.lineageos.org
Firmware:
d1: https://lineage.linux4.de/fw_update/d1.html
d2s: https://lineage.linux4.de/fw_update/d2s.html
d2x: https://lineage.linux4.de/fw_update/d2x.html
GApps: https://wiki.lineageos.org/gapps.html
Reporting Bugs
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.
Code:
What is your--
LineageOS version:
LineageOS Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
Support
Telegram group
Contributors
Linux4
Source Code: https://github.com/LineageOS
Kernel source: https://github.com/LineageOS/android_kernel_samsung_exynos9820

reserved

reserved

Instructions on the wiki page is telling to be sure the device is using Android 12 firmware . So how can I upgrade from official LineageOs 18.1 ?
From my understanding I need to flash stock Android 12 from Samsung and after that I can flash LineageOs 19..Is that right..?

HF2008 said:
Instructions on the wiki page is telling to be sure the device is using Android 12 firmware . So how can I upgrade from official LineageOs 18.1 ?
From my understanding I need to flash stock Android 12 from Samsung and after that I can flash LineageOs 19..Is that right..?
Click to expand...
Click to collapse
You can do it without wipe, here's an example for d2s: https://lineage.linux4.de/fw_update/d2s.html
Just follow these instructions (select right device ofc) and after it flashed boot recovery and continue with installing 19.1.

Linux4 said:
You can do it without wipe, here's an example for d2s: https://lineage.linux4.de/fw_update/d2s.html
Just follow these instructions (select right device ofc) and after it flashed boot recovery and continue with installing 19.1.
Click to expand...
Click to collapse
Thank's for your reply.!
So to be clear the steps to firmware update without flashing full Samsung firmware are:
Put the phone in Download mode
Heimdall flash the firmware files
Heimdall flash LineageOs 19.1 recovery
Boot directly into lineage recovery
Adb sideload LineageOs 19.1 zip file
Can I skip Format data in lineage recovery after Heimdall flash the firmware files considering I'm coming from LineageOs 18.1 .?
My current bootloader is ver 7 so the new one will be ver 7 also..?

Hello,
I follow the instructions for a first installation to my Note10+ d2s
I have an error21 at the last step during sideload I get "failed to verify the whole-file signature"
I have check twice the .zip file.
Anyone has an idea ? Thanks

I probably made my case worse, I tried to install the firmware for lineageos 19.1 (d2s: https://lineage.linux4.de/fw_update/d2s.html)
And now, I have this "kernel rev. check fail. device::8, binary:7"
It sounds bad...
Just tried to reflash the previous recovery (lineage-19.1-20220524-recovery-d2s.img) but I can't access, just a bootloop with the kernel message...

Hi! Does this default kernel have the TTL module for iptables? (And if not, maybe it would be a good idea to add it?)
Actually, running iodeOS but it seems like it is based on this LOS sources...

Why twrp does not work and causes bootloop?

Thx for your Work Linux4

Hello. I want to switch from dr.ketan's rom to lineageOs. What should I do. Is it okay if I flash directly from twrp?

does it have themes? customisable? except color tones and so on...any custom theming? like you have in samsung store

Development [ROM][13.0] LineageOS 20 Unofficial for Veux [Stable][20230418]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 13, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Code:
/*
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Current build: 20230418
lineage-20.0-20230418-UNOFFICIAL-veux.zip
https://devuploads.com/qwzulbkkaw7r
(Please disable any adblockers downloading from my links)
gapps:
https://devuploads.com/2b4cyuom68n2
Instructions
Flashing via recovery if already have TWRP or OrangeFox:
Flash build, reboot to recovery
Flash Gapps
Flash Magisk
Reboot to system
Profit!
Flashing via lineage recovery:
Use payload-dumper to extract payload.bin
fastboot flash boot boot.img
fastboot flash vendor_boot vendor_boot.img
fastboot reboot recovery
adb sideload build.zip
adb sideload gapps.zip
adb sideload magisk.zip
Reboot to system
Profit!
Flashing via OTG or SdCard :
Apply update from sdcard1 or OTG, flash build
Apply update from sdcard1 or OTG, flash gapps
Apply update from sdcard1 or OTG, flash magisk
Reboot to system
Profit!
Feel free to join my telegram group for any doubts, and builds:
deepongi-labs | Aurora Kernel OSS ⚡️
unofficial and official stuff for OnePlus 8 | Home of Aurora OSS Kernel
t.me
Kernel source: https://github.com/deepongi-labs/android_kernel_xiaomi_sm6375-pex
Thanks to @Ramyski for the device trees, and also @JaswalAshish
If you wish to donate, use the button bellow. Thank you.

new build is up:
Download
Download File
devuploads.com
regards.

Interested

Good job.
I should try it later.

That's fantastic news, will flash as soon as I can

I put it, by the way, it is perfectly stitched through twrp.
The firmware is for fans of minimalism, there are no additional settings at all.
Oh, it's a pity, the days of cyan have passed.

guys, just a heads-up.. i've changed my nickname here on XDA, "infected_" ceases to exist, and "deepongi" is borned...
regards,
deepongi

okay, so anything special to be done on this one? flash twrp, run backup, do a full cleanup, flash ROM zip from twrp, then gapps, profit?

kopaczus said:
okay, so anything special to be done on this one? flash twrp, run backup, do a full cleanup, flash ROM zip from twrp, then gapps, profit?
Click to expand...
Click to collapse
correct.

new build is up:
https://devuploads.com/hb6g2vcpl0g0
updated OP with instructions

deepongi said:
new build is up:
https://devuploads.com/hb6g2vcpl0g0
updated OP with instructions
Click to expand...
Click to collapse
Changelog?

ruperxl89 said:
Changelog?
Click to expand...
Click to collapse
https://review.lineageos.org/q/branch:lineage-20.0+status:merged+mergedafter:2023-01-20
no new device changes.

Thanks, but this rom have some bug??
deepongi said:
https://review.lineageos.org/q/branch:lineage-20.0+status:merged+mergedafter:2023-01-20
no new device changes.
Click to expand...
Click to collapse

ruperxl89 said:
Thanks, but this rom have some bug??
Click to expand...
Click to collapse
non that i am aware.

something wrong with the gapps you linked? I only get play store and it says I have no network connection, so it won't log me in.

deepongi said:
View attachment 5814669
LineageOS is a free, community built, aftermarket firmware distribution of Android 13, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Code:
/*
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Current build: 20230123
lineage-20.0-20230123-UNOFFICIAL-veux.zip
https://devuploads.com/hb6g2vcpl0g0
gapps:
https://devuploads.com/2b4cyuom68n2
twrp
https://devuploads.com/gfzkp7f5k768
Instructions
Flashing via recovery if already have TWRP:
Flash build, reboot to recovery
Flash Gapps
Flash Magisk
Reboot to system
Profit!
Flashing via lineage recovery:
Use payload-dumper to extract payload.bin
fastboot flash boot boot.img
fastboot flash vendor_boot vendor_boot.img
fastboot reboot recovery
adb sideload build.zip
adb sideload gapps.zip
adb sideload magisk.zip
Reboot to system
Profit!
Flashing via OTG or SdCard :
Apply update from sdcard1 or OTG, flash build
Apply update from sdcard1 or OTG, flash gapps
Apply update from sdcard1 or OTG, flash magisk
Reboot to system
Profit!
Kernel source: https://github.com/infectedmushi/android_kernel_xiaomi_sm6375
Thanks to @Ramyski for the device trees.
If you wish to donate, use the button bellow. Thank you.

Click to expand...
Click to collapse
thank you so much video recording not working

kopaczus said:
something wrong with the gapps you linked? I only get play store and it says I have no network connection, so it won't log me in.
Click to expand...
Click to collapse
https://sourceforge.net/projects/nikgapps/files/Canary-Releases/NikGapps-T/21-Jan-2023/NikGapps-core-arm64-13-20230121-signed.zip/download

okay, I flashed the NikGapps and all is okay outside of chrome and android system webview not updating, but not a big deal for now.
more issues:
- NFC is inactive in the drop-down menu and it cannot be found in settings
- google wallet tells me I'm rooted even though all other banking apps are fine, I set up magisk with shamiko, systemless hosts and universal safetynet fix, and of course hid the applications and google services in the denylist. I'll try to figure this one out.
- video recording crashing google camera (camera error: can't connect to camera)

Thanks for your work! Two questions:
deepongi said:
Kernel source: https://github.com/infectedmushi/android_kernel_xiaomi_sm6375
Click to expand...
Click to collapse
1. That source link is dead. What's the current URL?
2. What are the differences between your ROM build and this one: https://github.com/xiaomi-sm6375-devs/LineageOS_veux/releases / https://github.com/xiaomi-sm6375-devs/android_device_xiaomi_veux

del

Development [ROM] [13.0] DerpFest Tango for Pixel 6a [OFFICIAL] [bluejay]

I get this when i'm trying to flash. Can anyone help me?

jordan2333 said:
I get this when i'm trying to flash. Can anyone help me?
Click to expand...
Click to collapse
Did you flash boot and vendor_boot before sideload ?
I did a clean install with this way below:
(1) Extract boot.img, vendor_boot.img from payload.bin in ROM.zip
(2) fastboot flash boot boot.img
(3) fastboot flash vendor_boot vendor_boot.img
(4) reboot and goto recovery
(5) Factory reset -> Format data
(6) Install update -> ADB Sideload
(7) adb sideload ROM.zip

Derpfest Release Candidate
-Fixed Wifidisplay
-Launcher Optimizations
DOWNLOAD

E-sim is supported on this rom
Thanks

Thank you Derpfest for our Pixel 6a.
I installed 20230510 build (clean install, no restoration, completely newly seting up)
and then update to 20230522 build (dirty install),
and update to 20230524 build (dirty install)
3 days have passed since the 20230524 build, but there is no problem at all.
From the first time installation, there really is no problem, and it operates extremely smooth. Both of the 20230522 and 20230524 builds are also perfectly fine. Some bug fixes were done, but I didn't notice the bug itself.

klazyStrida said:
Thank you Derpfest for our Pixel 6a.
I installed 20230510 build (clean install, no restoration, completely newly seting up)
and then update to 20230522 build (dirty install),
and update to 20230524 build (dirty install)
3 days have passed since the 20230524 build, but there is no problem at all.
From the first time installation, there really is no problem, and it operates extremely smooth. Both of the 20230522 and 20230524 builds are also perfectly fine. Some bug fixes were done, but I didn't notice the bug itself.
Click to expand...
Click to collapse
How's your battery life compared to stock, vs. other roms? Just overall

mmead1143 said:
How's your battery life compared to stock, vs. other roms? Just overall
Click to expand...
Click to collapse
There's no problem in battery consamption.
It's not that Derpfest is good, but it's the same with Google's stock OS and other custom ROMs.

klazyStrida said:
There's no problem in battery consamption.
It's not that Derpfest is good, but it's the same with Google's stock OS and other custom ROMs.
Click to expand...
Click to collapse
Thanks a ton!

Hello! Dear developer, is there an "oriole" planned?

klazyStrida said:
Did you flash boot and vendor_boot before sideload ?
I did a clean install with this way below:
(1) Extract boot.img, vendor_boot.img from payload.bin in ROM.zip
(2) fastboot flash boot boot.img
(3) fastboot flash vendor_boot vendor_boot.img
(4) reboot and goto recovery
(5) Factory reset -> Format data
(6) Install update -> ADB Sideload
(7) adb sideload ROM.zip
Click to expand...
Click to collapse
1st newcomers should always make sure their on the latest official google firmware before flashing any custom rom.
Then the Dev could build with these commands and provide maximum compatibility for end user.
source build/envsetup.sh
Click to expand...
Click to collapse
Then
Brunch bluejay
Click to expand...
Click to collapse
This provides the Full OTA zip and is optimal in flashing via recovery, also provides a way for the Dev to develop his ota system. But if the dev doesn't clean his directory after it finishing brunch , would to be run these commands and build a full update image zip that's flash able via bootloader
croot
Click to expand...
Click to collapse
And then
m updatepackage
Click to expand...
Click to collapse
This builds the same identical builds , leaving end users better choices

maximusfoa said:
Hello! Dear developer, is there an "oriole" planned?
Click to expand...
Click to collapse
Not from me. I only build for devices i own.

pete80pro said:
Not from me. I only build for devices i own.
Click to expand...
Click to collapse
Ok, thnk

Database Info

welcome