Database Info

[ROOTED] Lava X81 using Magisk Manager by patching stock boot image (No TWRP)

Who said this method to us ?
aIecxs, XDA Senior Member from Germany
https://forum.xda-developers.com/member.php?u=7285913
Thread Link :
https://forum.xda-developers.com/android/help/helproot-lava-x81-t3620166
Thanks alecks!!!!:highfive:
------------------------------------------------------------
Youtube Video Assistance:
Video Name: How to root Android using Magisk Manager & stock boot.img
Channel : Hovatek
------------------------------------------------------------
REQUIREMENTS :
(0) Unlocked Bootloader
To unlock bootloader in Lava X81 by Fastboot mode use the command
fastboot oem unlock #unlock bootloader via fastboot mode
{{{{{ NOTE: Unlocking bootloader in Lava X81 will erase all the user data. So please take a backup before unlocking bootloader. }}}}}
(1) Stock boot.img for your phone model (its best its for your Build Number / Variant ) . You can extract from the stock rom / firmware of your device (you may check our collection at https://forum.hovatek.com/forum-89.html ) OR backup from your device using a hardware box e.g Miracle Box, CM2, Nck Box Pro etc
(2) Download Latest Magisk Manager {Currently 7.3.0 (220)}
(3) Active internet connection on your Android device
(4) A windows 10 Laptop
---------------------------------------------------------
INSTRUCTIONS :
Step 1: Patching the stock boot.img
1. Install Magisk Manager 7.3.0 (220) APK on your android device.
2. Copy the stock boot.img of Lava X81 to your phone's internal storage or SD card whereever you want (Internal Storege\Dowloads is the better option)
3. Launch Magisk Manager app and check for latest updates. After the updates you will see that Magisk Manager is up to date.
4. Then, Select (Magisk is not installed. Latest 19.3 (19300)) Install > (Install Magisk) Install > Select and Patch a File >
5. Navigate to the location of the stock boot.img you copied earlier on (select Dowloads option or in my case, I used ES File Explorer File Manager), then Select it
6. Magisk Manager should begin downloading the magisk zip file for our arm64-v8a Device platform.
7. Once download is complete, MagiskManager will automatically patch the boot file and store it under
/storage/emulated/0/Download/magisk_patched.img
(Then I renamed it as "patched_boot.img" for our convenience)
Step 2: Flashing the patched boot.img
Among a variety of options to flash, I preferred Fastboot method
(0) Connect your Lava X81 one or two times to the PC (for preinstalling drivers)
(1) Boot your Lava X81 into fastboot mode.
(2) Open platform-tools_r28.0.1-windows.zip file
(3) Simultaneously press Keyboard's Shift key and Right click on the mouse, to open PowerShell window
(4) On the PowerShell use the following codes to flash:
Starting from phone's normal usb debugging mode,
adb devices #Ensures your phone connectivity in ADB (Android Debug Interface) mode via USB Debugging
adb reboot-bootloader #Reboot your phone to Fastboot Mode from ADB
fastboot devices #Ensures your phone connectivity in Fastboot mode
fastboot getvar unlocked #To check whether the bootloader is unlocked or not. It should be unlocked to proceed further steps
fastboot flash boot patched_boot.img #Flash the Magisk Patched Boot image file in Fastboot Mode
fastboot reboot #Reboot to the system from exiting Fastboot Mode​
(5) Congrats and check with a Root checker app for root status. While checking for root status itself pop out for root permission.
--------------------------------------------------------
Proofs and All the necessary files as a zip file - MediaFire Link
Root Lava X81 using Magisk Manager by patching stock boot image (No TWRP)
http://www.mediafire.com/file/zjb78878i52865c/Root_Lava_X81_using_Magisk_Manager_by_patching_stock_boot_image_%2528No_TWRP%2529.zip/file

It is worked successfully guys!
Try it.
Two Bugs:
1. Cannot try reboot to the stock recovery. It strucks. You have to switch off and switch on the phone. During this your phone will make fear "Performing factory reset". Don't worry! blah blah blah...
SO YOU MUST DEVELOP TWRP RECOVERY FOR LAVA X81
2. Cannot flash .zip files using Magisk only. It every time asks TWRP or any other recovery to flash the zip file.
So you must develop TWRP recovery for Lava X81
3. While installing SuperSU it says "binary occupied" by MagiskSU. So apps like FlashFire won't flash zip file.
4. Don't try to uninstall stock YouTube app & and replace it with YouTube vanced app. Use YouTube Vanced the app for no root along with MicroG. But YouTube vanced 14.21.54 seems to be exceptional.

[Guide] Root with Magisk, easy method

Hello,
I have a Galaxy On5 Pro in my home and was running AdHell till it could. Now that Samsung has stopped providing keys, an alternate way of disabling stock bloats and adblock was needed.
I tried the simplest way of rooting this phone, should work with any phone on On5 series.
1. Download the latest Firmware for your Phone from Updato or in other thread. Make sure it matches what you already have on your phone. Open archive and extract boot.img from that.
2. In Developer Options, enable OEM Unlocking.
3. Install Magisk Manager (as you normally do any apk).
4. Open Magisk Manager and click install, then select patch boot image. Select the boot.img you extratced in step 1 and select format to be 'tar'. Copy this patched image in Computer.
5. Boot in Odin and flash the patched boot image. Reboot the device.
You are rooted with Magisk.
If anyone is interested, I can provide more information if needed.
Thank you.

Works on SM-S550TL (TracFone)?

indianets said:
Hello,
I have a Galaxy On5 Pro in my home and was running AdHell till it could. Now that Samsung has stopped providing keys, an alternate way of disabling stock bloats and adblock was needed.
I tried the simplest way of rooting this phone, should work with any phone on On5 series.
1. Download the latest Firmware for your Phone from Updato or in other thread. Make sure it matches what you already have on your phone. Open archive and extract boot.img from that.
2. In Developer Options, enable OEM Unlocking.
3. Install Magisk Manager (as you normally do any apk).
4. Open Magisk Manager and click install, then select patch boot image. Select the boot.img you extratced in step 1 and select format to be 'tar'. Copy this patched image in Computer.
5. Boot in Odin and flash the patched boot image. Reboot the device.
You are rooted with Magisk.
If anyone is interested, I can provide more information if needed.
Thank you.
Click to expand...
Click to collapse
Boss, do u have a video instruction regarding this?

[ROOT] Galaxy J810x Methods Magisk And Twrp

[ROOT] Galaxy J810x Methods Magisk And Twrp
[ROOT Normaly]
1. Download Stock ROM 9.x or upgrade normaly
2. Start your ROM enter configuration, developer options and set Unlock by OEM
3. Download Odin 3.14 and drivers
4. Download Magisk and TWRP 3.3.0 and no-verity-opt-encrypt-6.1.zip
5. Install drivers for J7
6. Copy Magisk and no-verity-opt-encrypt-6.1.zip to SD Card
7. Enter in Stock Recovery and Factory reset
[Download MODE]
8. After this enter in download mode imediatly or your system encrypt
9. no start your stock rom or your system encrypt
10. Open Odin 3.14 flash Stock Bootloader and Modem Only If necessary
11. Flash TWRP with Odin or upgrade via img
12. Reboot imediatly in Recovery
13. Flash Magisk 20
14. Flash no-verity-opt-encrypt-6.1.zip
15. iNTALL your prefered Custom ROM
16. Install Magisk Manager 7.5
17. Press Thanks please
18. in this moment install Havoc or Lineage 17.1
[mAgisk mEthod]
You will need the stock Rom files from Sammobile for your phone model(BL, AP, CP, HOME CSC) and Odin on your PC.
1. Install Magisk manager on your phone.
2 Copy the AP file on your Download folder of your phone.
3 Open Magisk and tap Install Magisk then Select and patch a file. Go on Download folder and select the AP file to patch. After is done it will create a file in your Download folder named magisk_patched.tar. Copy this file back on your PC.
4 Run Odin and put your phone on Download mode. To get in Download mode shut your phone off, Hold pressed VOLUME UP + POWER, select Reboot to bootloader.
5 In Odin select BL, CP and Home_CSC from your stock ROM folder. In AP select the magisk_patched.tar file. Go on Optons and uncheck Auto Reboot. Hit START and let him finish. IMPORTANT, READ FIRST : After is done you have to restart the phone by pressing VOLUME DOWN + POWER and when the screen is black immediately press VOLUME UP + POWER. Dont let go until you are in Recovery mode, even if restarts.
5 select Wipe data/ factory reset and then Reboot system now. Might take a while to boot.
6 Set up your phone and install Magisk Manager again. It will ask you to complete the rooting will need to install few more files. Press OK.
WELL DONE. You have root now.
[RECOVERY][UNOFFICIAL]TWRP 3.3.1-0 Galaxy J8 J810M/F/FN/G/DS
https://forum.xda-developers.com/an...overy-twrp-3-3-1-0-galaxy-j8-j810m-f-t3962423
[Magisk 20.4] Primary option
https://github.com/topjohnwu/Magisk/releases/download/v20.4/Magisk-v20.4.zip
[Manager 7.5.2]
https://www.apkmirror.com/apk/topjohnwu/magisk-manager/magisk-manager-7-5-2-1e2de1bb-release/
[no-verity-opt-encrypt-6.1.zip]
https://build.nethunter.com/android-tools/no-verity-opt-encrypt/
[Official]
Magisk Official Post
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
[RMM State Fix] Miracle box
https://forum.xda-developers.com/ga...-rmm-fix-oreo-8-1-oem-unlock-fix-dez-t3877764
The Secret Of My Seccess is Jesus​

Since you mentioned custom ROMs in the first guide, have you found any that are compatible with the J8? If so, could you link them?
Edit: Found a port of LineageOS 16 (Android 9.0) by the developer Bad Guy. However I couldn't get TWRP to flash it as it always resulted in error 7, despite modifying the file to remove the assert section. The no-verity-opt-encrypt-6.1.zip would not flash either due to error 1.

Someonerandom said:
Since you mentioned custom ROMs in the first guide, have you found any that are compatible with the J8? If so, could you link them?
Edit: Found a port of LineageOS 16 (Android 9.0) by the developer Bad Guy. However I couldn't get TWRP to flash it as it always resulted in error 7, despite modifying the file to remove the assert section. The no-verity-opt-encrypt-6.1.zip would not flash either due to error 1.
Click to expand...
Click to collapse
Hello my friend
technically j8 has a native treble and means that any treble ROM can be installed on the j8 with a custom kernel
If You have time test this ROM
https://forum.xda-developers.com/ga...om-crdroid-6-3-android-q-10-0-galaxy-t4048917
You need Kernel Android 10
Remember backup your files
Unlock oem and USB debugg

hacker812c said:
Hello my friend
technically j8 has a native treble and means that any treble ROM can be installed on the j8 with a custom kernel
If You have time test this ROM
https://forum.xda-developers.com/ga...om-crdroid-6-3-android-q-10-0-galaxy-t4048917
You need Kernel Android 10
Remember backup your files
Unlock oem and USB debugg
Click to expand...
Click to collapse
I have taken a look at your ROM, however I don't think it would work.
The ROM is ARM64, and the Galaxy J8 is an ARM device with a 64-bit binder. This means that the ROM needs to have that architecture to work.
It also requires Spaget X which is built for Exynos, and the J8 is a Snapdragon device.
And on another note, do you happen to know the fix for error 1 on the disable forced encryption zip?

Someonerandom said:
I have taken a look at your ROM, however I don't think it would work.
The ROM is ARM64, and the Galaxy J8 is an ARM device with a 64-bit binder. This means that the ROM needs to have that architecture to work.
It also requires Spaget X which is built for Exynos, and the J8 is a Snapdragon device.
And on another note, do you happen to know the fix for error 1 on the disable forced encryption zip?
Click to expand...
Click to collapse
Yes
If j8 use custom kernel 10
You install any release treble
I have release arm and arm64

Can i do that with android 8?

J810F android 8 or 10 working ???

TWRP and Root

Samsung galaxy A01 (A015F) How to install TWRP and unlock bootloader?

1. Unlock your bootloader enter in download mode Vol+ + Vol- + USB conected to pc (Keep in mind that by doing this you will lose your files, it is advisable to make a backup of your photos, music, etc.)
2. Once you start your cell phone install magisk manager, Choosing the boot.img file of your rom into the app (Tip: Only!!! If your model is SM-A015M Android 11 I leave you my own modified boot.img to flash:
File on MEGA
mega.nz
Otherwise, you can download the firmware (3.79 gb) and extract the boot.img from the firmware of your model SM-A015 M / F ... Android 10, Android 11... etc. And No need for pc
https://samfrew.com/model/SM-A015M/
3. The image will begin to flash
4. When it restarts you will have Root on the cell phone!
------------------------------------------------------------------------------------------------------------------------------------------------
Extra: If you need the custom recovery I give you the link with my TWRP which is installed through the Odin program on a PC (this step does not delete your files)
File on MEGA
mega.nz
Keep in mind that to install TWRP you must deactivate the DM-VERITY & FORCEENCRYPT DISABLER I leave it in a link:
Zackptg5 - Android
zackptg5.com
This is a module that can be installed via magisk, which is necessary to decrypt the system ... so once TWRP is installed, it is advisable to uninstall it via Magisk to avoid R / W errors

Tell me please, without pu it is impossible to flash the phone at all?
Подскажите пожалуйста, без пу прошить телефон вообще нельзя получается?

BV9900 TWRP and Root for EAA Firmware

Hello I Port TWRP 3.3.1. and Magisk Manager v23 for rooting BV9900 with Firmware BV9900_EEA_S900AA_V1.0_20200522V12_user_20200523-0035!
If you have Firmware BV9900_EEA_S900AA_V1.0_20191225V08_user_20200103 Update to BV9900_EEA_S900AA_V1.0_20200522V12_user_20200523-0035.
instructions:
You must follow a procedure!
Make Backup because your data will be wiped!
Unlock Botloader!
Flash Firmware BV9900_EEA_S900AA_V1.0_20191225V08_user_20200103 with SP Flash tool -Includet Scatter File
Offical Firmware:
MEGA
MEGA provides free cloud storage with convenient and powerful always-on privacy. Claim your free 20GB now
mega.nz
Boot system
Connect wifi internet
Make system update to version BV9900_EAA_S900AA_V1.0_20200522V12_20200523-0035 - Normal Update in the Phone
Run on PC adb Tool and flash Vbmeta.imf from TWRP Folder:
adb devices
adb reboot-bootloader
fastboot devices
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
Power on Mobile
Power off Mobile
Run Sp Flash tool and Flash:
(RECOVERY)TWRP-Recovery 3.3.1.img and
(BOOT)-Boot-Magisk23.img with SP Flash Tool
Disconect Phone from PC
HOLD KEY UP and POWER. Then click Recovery.In TWRP-Recovery Slide "Swipe to Allow Modifications"
Go "Mount" Vendor and nvada
////If you cant mount Data Partition in TWRP-Recovery:
Format Data Partition In TWRP Recovery - You must Formating data not Wipe
Wipe Dalvik/Cache
Reboot to Recovery (check now if you can mount data)
/////
Copy File from BV9900 TWRP&Magisk/fstab/Vendor/etc to vendor/etc
Copy File from BV9900 TWRP&Magisk/fstab/nvdata to nvada
Reboot to System
Instal magisk apk from your launcher....Click ok and restart phone.
Now you can login to google acount.
If you have problem with loading Widgets find build.prop file in mobile or download from Playstore BuildProp Editor
This problem is solved very easily with root access. You just need to fix one line in the build.prop file:
ro.freeme_freemanager=1
ro.hct_autostart_manager=1
In these lines you need to change 1 to 0
Magisk manager works without TWRP great
In TWRP recovery dos not work mtp
And big problem with TWRP is if you formating data then mobile can not recognize sim card (IMEI null,baseband unkown)
If anybody have solution thanks.

Android 10?

Android 9

How remove Chinese text? Thank You.