Related
Hello,
I have successfully installed TWRP and a custom ROM on a UHANS A101S. And now I want to share the files and instructions, because they come from Russian forum 4pda.ru (thanks and credits to them).
Warning: I do not take any responsibility for whatever outcome you have when trying this on your device. It worked for me, but everything you do is your own risk.
Now, here's how it worked for me:
(Instructions are for UHANS A101S only, NOT for A101)
Installation of TWRP:
1. Download TWRP recovery image for UHANS A101S. Check that you get the correct recovery.img for your firmware build. Also download the scatter file for the UHANS A101S.
2. Download SP Flash Tool and driver for UHANS A101S.
3. Install driver on your PC and reboot your PC.
4. Unpack SP Flash Tool. Unpack scatter file. Put scatter file in same folder as recovery.img file.
5. On your phone, enable USB debugging mode in developer settings. (To activate developer settings menu, tap 7 times on your build number in Settings > About).
6. Switch off phone. Remove battery. Wait for 10 seconds. Put battery back into your phone, but don't start it! Keep it switched off.
7. Start SP Flash Tool with Admin permission. Click "scatter-loading" and navigate to the folder where you unpacked the scatter file and select it. Make sure that "Download Only" is selected in drop-down menu on the left. Then click the "Download" button in SP Flash Tool.
8. Connect your phone to the USB port of your PC and press Volume Up on your phone, so SP Flash Tool will recognize it.
9. If everything goes fine, in SP Flash Tool a red progress bar at the bottom turns yellow, then green and finally you get a pop-up with a green check mark.
10. Now you can boot into TWRP. To do so, unplug phone from PC and press Power On and Volume Up simultaneously.
Download links for installing custom recovery TWRP for UHANS A101S:
Download from Mediafire
(For the recovery.img file, choose DRV.TEST version if you see this appendix in your firmware version. Otherwise, option v3.05 is correct).
If you want to restore stock recovery, recovery image from firmware version 3.05 is available too.
To install custom ROM, download your preferred ROM, copy it to your phone and flash from within TWRP.
Custom ROMs for UHANS A101S:
CLEAN MOD (Stock ROM without bloat)
MOKEE ROM (Gapps: no, root: no)
Resurrection Remix 5.7.4 (Gapps: no, root: yes)
To get Google Play store, flash Gapps package.
Download Gapps package here (choose ARM and Android 6.0):
http://opengapps.org
(Pico or Nano package recommended).
If you want root access and if it's not included in the ROM, you can flash SuperSU Zip using TWRP:
SR2-SuperSU-v2.79-SR2-20170103215521.zip
Stock ROM from UHANS (via SP Flash Tool):
https://mega.nz/#F!lX5BGKJS!pVksNANFfS2R8Jrpy6O1XQ
Source: http://www.uhans.cc/Service/index
A new custom rom
Hey guy! Thanks for your ROMs, I have Uhans A101S and they worked properly but I wanted to try something else with a google stock experience and so I wanna ask you if you can create another custom ROM (like lineage os) for this device.
Thanks a lot!
This guide is specifically aimed for Z010DD users who want to flash custom ROMs:If you want to stay on stock and only wanna flash TWRP and root the Stock ROM, please skip this thread and refer to @jide1 's guide here instead: https://forum.xda-developers.com/as...ot-asus-zenfone-max-zc550kl-qualcomm-t3652518
Things to be noted beforehand:
1. Make sure you are on the latest/final stock rom/firmware
2. Need Unlocked bootloader (Linked below, install the apk and follow the steps)
3. Take backup of all of your data from the internal storage. (To avoid depression if accidentally wiped your precious data)
4. Minimal ADB and Fastboot (Thread Linked below, Download from there and follow on-screen steps).
Steps:
A. To flash TWRP:
1. Once you have unlocked the bootloader, download 'minimal adb and fastboot zip' and PBRP zip(extract img from it).
2. Boot into fastboot by switching off the device, then POWER + VOLUME 'UP'. (You'll enter CSC ode screen, which is fastboot so don't worry)
3. Place the recovery image into the fastboot folder and open a command window there.
4. Connect your device, then type 'fastboot devices' and Enter, just to verify if your device is shown.
5. type: fastboot flash recovery recoveryname.img
THE NEXT STEP IS IMPORTANT, Pay Attention.
6. Now REBOOT Directly to twrp by holding POWER + VOLUME 'DOWN'. Don't boot into system else stock recovery will get restored.
B. Preparing for Flashing ROMs:
Once you have booted to twrp successfully, you will need to 'format' all the partitions, which includes:
System, Data, Cache, Dalvik/ART Cache, & Internal Storage.
HERE YOU WILL LOSE ALL OF YOUR DATA, YOU HAVE BEEN WARNED ALREADY SO, yeah.
Click to expand...
Click to collapse
1. In TWRP, go to WIPE -> ADVANCED WIPE;
2. Select the above listed partitions and then SWIPE TO WIPE.
Note: You will notice a partition called 'ASDF' ,wipe/skip, doesn't matter.
3. Come back to home, go to REBOOT -> RECOVERY
C. Flashing ROMs:
1. Download the ROM, Patch, and Kernel zip (Linked Below).
2. Flash them in the mentioned order.
3. Flash Opengapps (if needed) (Nano Gapps recomended).
4. Reboot.
(NOTE: FOR MAGISK, FLASH IT 'AFTER FIRST BOOT ONLY', AND IF FLASHING ZIP NOT WORKING, THEN see POST #3)
Bugs and Notes:
1. Notification LED doesn't BLINK when a notification arrives, it stays on (colors are correct though).
2. VoLTE is broken on pie roms (ignore the volte logo), stick to Oreo if you want VoLTE. (LTE data works fine).
3. Reboot Sometimes get stuck in black screen, its RANDOM, LONG Press the power button for 15 secs instead if that happens.
4. If any ROM contains 'Always On' functionality, disable it as the feature doesn't work properly. (Ambient display has no issues)
Links: Refer POST #2 .
Credits:
@SakilMondal for roms.
@YaAlex for kernel and patch for Z010DD.
Myself for testing.
Created 2019-04-22
Last Updated 2019-05-20
Links:
ROMs: https://sourceforge.net/projects/zenfone-max-updates/files/Z010D/ (Please flash the latest ones only, don't use old ones)
Patch (link updated): https://anonymousfiles.io/3WLplRtD/
Kernel (link updated + new kernel update): https://anonymousfiles.io/m4oKP6wL/
TWRP Recovery (Image file, Flash via fastboot): https://drive.google.com/file/d/1txHT0vRNo0gTMkD0Sb5kpuQQT0dAiphH/view
ASUS Official Bootloader Unlock Tool for 8939 Devices: http://dlcdnet.asus.com/pub/ASUS/Ze...513.74708998.1502054577-2083321676.1502054577
Minimal ADB and Fastboot: https://forum.xda-developers.com/showthread.php?t=2317790
Troubleshooting:
Instructions for Magisk:
1. Extract boot image from the rom zip
2. Go to Magisk Manager app
3. Tap 'Install' next to 'Magisk is not installed' line.
4. Tap 'Select and patch a file'
5. Navigate to the extracted boot image. It will now create a new boot image and save it in mentioned location.
6. Reboot to recovery, Flash the Boot image + KERNEL zip.
7. Reboot to system.
To fix CTS Mismatch in Magisk:
Open /system/build.prop, replace the line 'ro.build.fingerprint=' with:
Code:
ro.build.fingerprint=asus/WW_Phone/ASUS_Z010_2:6.0.1/MMB29P/13.8.26.80-20161230:user/release-keys
Open /system/vendor/build.prop , replace the line 'ro.vendor.build.fingerprint=' with:
Code:
ro.vendor.build.fingerprint=asus/WW_Phone/ASUS_Z010_2:6.0.1/MMB29P/13.8.26.80-20161230:user/release-keys
Patch is required for sd410 devices??
koushik99 said:
Patch is required for sd410 devices??
Click to expand...
Click to collapse
Nope, patch is only for DD.
Guide has been updated. Please check.
unable to flash GAPPS
Hai , i got a problem , phone shutdowns after flashing GAPPS (opengapps) , i tried Many RAMS(DOT OS, lineage-16.0-20190514-Z010D, BootleggersROM-Pie4Z010D.4.1-Stable-Unshishufied-20190421-170442 ,RR-P-v7.0.2-20190505-Z010D-Unofficial ) , without GAPPS Flashing it is , ROM working good , please let us know how to fl
I cant turn off the phone with pie,
i need to go in recovery first to power off otherwise after a while it turns back on
is it a known bug?
PRASAD.ASRS said:
Hai , i got a problem , phone shutdowns after flashing GAPPS (opengapps) , i tried Many RAMS(DOT OS, lineage-16.0-20190514-Z010D, BootleggersROM-Pie4Z010D.4.1-Stable-Unshishufied-20190421-170442 ,RR-P-v7.0.2-20190505-Z010D-Unofficial ) , without GAPPS Flashing it is , ROM working good , please let us know how to fl
Click to expand...
Click to collapse
Looks like you're using aroma gapps..
Use micro gapps or below. Here everything works fine.
ihatebarrels said:
I cant turn off the phone with pie,
i need to go in recovery first to power off otherwise after a while it turns back on
is it a known bug?
Click to expand...
Click to collapse
In both oreo and pie, for both z010d and dd, reboot and shutdown is an issue
It doesn't happen everytime, its random, and no fix is found yet.
Is it working on asus zenfone max 2016 sd 615?
Can anyone give me the updated link for the dd-fix-r5.zip and GUNMetal-R3.zip files
james_imch said:
Can anyone give me the updated link for the dd-fix-r5.zip and GUNMetal-R3.zip files
Click to expand...
Click to collapse
I just saw that the link was no longer working (would have been better if you pointed out that first instead)
Anyways,
Link is updated, check again (kernel is updated,patch remains the same).
Kaustav365 said:
Is it working on asus zenfone max 2016 sd 615?
Click to expand...
Click to collapse
Hope you have read the OP properly
This thread is only for sd615/Z010DD/MSM8939, and its clearly mentioned.
TechNova said:
I just saw that the link was no longer working (would have been better if you pointed out that first instead)
Anyways,
Link is updated, check again (kernel is updated,patch remains the same).
Click to expand...
Click to collapse
PBRP Recovery (flashable zip) link is also not working. Please update it.
james_imch said:
PBRP Recovery (flashable zip) link is also not working. Please update it.
Click to expand...
Click to collapse
Done,
Removed pbrp and now Twrp link posted.
TechNova said:
Looks like you're using aroma gapps..
Use micro gapps or below. Here everything works fine.
Click to expand...
Click to collapse
Hey! I am also facing the same issue. I tried the nano version of Gapps on my Asus Zenfone Max Z010D and my phone is still crashing it keeps restarting and then automatically turns off. Is there any issue to fix this?
unable to flash roms it shows up no digest found or invalid zip or update error 7
please help how do i find correct rom for sd615 8939
Eric0000 said:
unable to flash roms it shows up no digest found or invalid zip or update error 7
please help how do i find correct rom for sd615 8939
Click to expand...
Click to collapse
I too facing same problem
Unlocking the apk no longer works
Hello,
I have a Galaxy On5 Pro in my home and was running AdHell till it could. Now that Samsung has stopped providing keys, an alternate way of disabling stock bloats and adblock was needed.
I tried the simplest way of rooting this phone, should work with any phone on On5 series.
1. Download the latest Firmware for your Phone from Updato or in other thread. Make sure it matches what you already have on your phone. Open archive and extract boot.img from that.
2. In Developer Options, enable OEM Unlocking.
3. Install Magisk Manager (as you normally do any apk).
4. Open Magisk Manager and click install, then select patch boot image. Select the boot.img you extratced in step 1 and select format to be 'tar'. Copy this patched image in Computer.
5. Boot in Odin and flash the patched boot image. Reboot the device.
You are rooted with Magisk.
If anyone is interested, I can provide more information if needed.
Thank you.
Works on SM-S550TL (TracFone)?
indianets said:
Hello,
I have a Galaxy On5 Pro in my home and was running AdHell till it could. Now that Samsung has stopped providing keys, an alternate way of disabling stock bloats and adblock was needed.
I tried the simplest way of rooting this phone, should work with any phone on On5 series.
1. Download the latest Firmware for your Phone from Updato or in other thread. Make sure it matches what you already have on your phone. Open archive and extract boot.img from that.
2. In Developer Options, enable OEM Unlocking.
3. Install Magisk Manager (as you normally do any apk).
4. Open Magisk Manager and click install, then select patch boot image. Select the boot.img you extratced in step 1 and select format to be 'tar'. Copy this patched image in Computer.
5. Boot in Odin and flash the patched boot image. Reboot the device.
You are rooted with Magisk.
If anyone is interested, I can provide more information if needed.
Thank you.
Click to expand...
Click to collapse
Boss, do u have a video instruction regarding this?
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Introduction
This thread is dedicated to newbies and rooting, so if you're familiar with the whole procedure, you're done
Just ask questions about every step and you'll receive help!
Downloads
TWRP Installer ZIP and TWRP IMG for Android 9/10: https://forum.xda-developers.com/oneplus-7/development/recovery-unofficial-twrp-recovery-t3932943
TWRP for Android 11(including instructions, thank's to @Nebrassy ): https://forum.xda-developers.com/t/recovery-11-unofficial-teamwin-recovery-project.4289455/
TWRP Installer ZIP = For example twrp-3.4.0-10-guacamole-unified-installer-mauronofrio.zip
TWRP IMG = For example twrp-3.4.0-10--guacamole-unified-Q-mauronofrio.img
Check for Pie or Q TWRP IMG! If you have Android Pie, choose Pie TWRP IMG, if you have Android Q, choose Q TWRP IMG.
The TWRP Installer ZIP works on Android Pie(9)/Q(10)
Magisk ZIP: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Hints
If you need to update TWRP or Magisk, always keep older versions of both in hand(Magisk canary or beta may have issues)
Remove your lockscreen protection which also removes encryption to prebvent mounting issues within TWRP
Before proceeding
Your Windows PC should already recognized your device with the USB cable
Use an USB cable provided with the phone
Make sure your Windows Explorer is set up to have file extensions enabled to avoid file name issues
This process will FORMAT/WIPE/DELETE your internal storage and every file of your phone, so please back it off your device at first!
Also keep a boot.img from your current system in place if anything went wrong so you can flash it via fastboot, see "Rooting without TWRP" for how to get it.
Rooting with TWRP (Android 9/10)
Steps for unlocked bootloader with TWRP AND Root(Magisk)
1. Follow this guide to unlock your Oneplus 7 bootloader(wipes everything on your device, works for OP7 pro and OP7): https://forum.xda-developers.com/showpost.php?p=79741564&postcount=2.
2. Your phones bootloader is now unlocked, leave the phone plugged to your PC
3. Make sure you have enabled USB-Debugging and Advanced Reboot under developer options(see step 1 how to enable it all) again after the first boot of the wiped device, since this gets reset
4. Copy the latest "TWRP installer ZIP" and "Magisk ZIP" to the phones internal storage.
5. Copy the "TWRP IMG" to the "platform-tools" folder from step 1.
6. Open command window or PowerShell window again if you did not closed it before within the "platform-tools" folder from step 1
7. Type
Code:
adb devices
to see if your device is connected and recognized sucessfully by your PC.
8. Type
Code:
adb reboot bootloader
to reboot to fastboot mode.
9. Type
Code:
fastboot boot recoveryimgfilename.img
to temporary boot TWRP, where recoveryimgfilename.img is the name of your downloaded TWRP *.img file, so watch your file name!.
10. Enter your screen lock PIN within TWRP if you have set it up before.
11. Allow modifications.
12. Now you have temporary booted twrp recovery. To make it stick permanently you need to flash the "TWRP installer ZIP" from your phones storage from step 4.
13. Hit "install" and navigate to the "TWRP installer ZIP" file and select it for installation(dont boot the system now!).
14. Go back and flash "Magisk ZIP" the same way as for TWRP Zip otherwise your device will not boot!
15. Thats all, you can unplug the USB cable and boot the device to your system. Your device is now bootloader unlocked with TWRP and Magisk:highfive:
Steps for unlocked bootloader with TWRP WITHOUT Root(Magisk)
1. Follow this guide to unlock your Oneplus 7 bootloader(wipes everything on your device, works for OP7 pro and OP7): https://forum.xda-developers.com/showpost.php?p=79741564&postcount=2.
2. Your phones bootloader is now unlocked, leave the phone plugged to your PC
3. Make sure you have enabled USB-Debugging and Advanced Reboot under developer options(see step 1 how to enable it all) again after the first boot of the wiped device, since this gets reset
4. Copy the latest "TWRP IMG" to the phones internal storage.
5. Copy the latest "TWRP IMG" to the "platform-tools" folder from step 1.
6. Open command window or PowerShell window again if you did not closed it before within the "platform-tools" folder from step 1
7. Type
Code:
adb devices
to see if your device is connected and recognized sucessfully by your PC.
8. Type
Code:
adb reboot bootloader
to reboot to fastboot mode.
9. Type
Code:
fastboot boot recoveryimgfilename.img
to temporary boot TWRP, where recoveryimgfilename.img is the name of your downloaded TWRP *.img file, so watch your file name!.
10. Enter your screen lock PIN within TWRP if you have set it up before.
11. Allow modifications.
12. Now you have temporary booted twrp recovery. To make it stick permanently you need to flash the "TWRP IMG" from your phones storage from step 4
13. Navigate to advanced menu within TWRP, click on "Install Recovery Ramdisk" and select the "TWRP IMG". This will patch the boot image which does Magisk otherwise.
14. Thats all, you can unplug the USB cable and boot the device to your system. Your device is now bootloader unlocked with TWRP:highfive:
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Rooting without TWRP (Android 9/10/11)
Also useful to get stock recovery and kernel --> Recovery is within boot.img on A/B devices like OP7
Refer here for unlocking the bootloader.
1. Download the payload dumper tool to your PC from here and extract it
2. Download the FULL OxygenOS Rom zip(The version your phone is running) and extract the payload.bin
3. Put payload.bin to "payload_input" folder o the extracted tool
4. Run payload_dumper.exe from the tool's folder
5. Extracted img files are in "payload_output" folder
6. Now you have your own boot.img for your Rom
7. Copy it to your phone
8. Patch the boot.img with Magisk directly on your device: Magisk Manager App -> hit install after your Magisk version -> hit "Select and Patch a file"
9. Copy the patched boot.img (it should be in the Download folder of your device named something like "magisk_patched-22100_bjjRn.img") back to your PC
10. Reboot your device to fastboot
11. Flash the patched magisk_patched-22100_bjjRn.img
Code:
fastboot flash boot_a magisk_patched-22100_bjjRn.img
fastboot flash boot_b magisk_patched-22100_bjjRn.img
12. Reboot your device. Now you have your phone rooted without the need of TWRP (Check with Magisk Manager App)
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Update your rooted OxygenOS (Android 9/10)Steps for UPDATE OxygenOS via OTA and keep unlocked bootloader, TWRP, Root(Magisk)
1. [OPTIONAL, but highly recommended]Backup everything in case of issues!
2. Go to Magisk Manager App and uninstall all modules
2.1 [Optional]: For some modules(read those instructions) you should do an reboot now, then proceed
3. Go to Android settings -> system -> system update and hit "Download & Install Now", don't reboot yet!
4. (not for Android 11)Flash "TWRP ZIP" within Magisk Manager App like a Module: Magisk Manager App -> Menu -> Modules "+". This installs TWRP to both a/b partitions.
5. Install Magisk via Magisk Manager App again: Magisk Manager App -> hit install after your Magisk version -> hit "install to inactive slot"
6. Reboot your device
7. Reinstall your Magisk Modules(maybe a reboot is necessary)
Your device is now updated via OTA and you keep TWRP and Root:highfive:
Steps for UPDATE OxygenOS via local upgrade and keep unlocked bootloader, TWRP, Root(Magisk)
1. [OPTIONAL, but highly recommended]Backup everything in case of issues!
2. Download the full rom zip file and place it into the root folder of your storage(/storage/emulated/0)
3. Go to Magisk Manager App and uninstall all modules
2.1 [Optional]: For some modules(read those instructions) you should do an reboot now, then proceed
4. Go to Android settings -> system -> system update and hit gear icon top right -> local upgrade, don't reboot yet!
5. (not for Android 11)Flash "TWRP ZIP" within Magisk Manager App like a Module: Magisk Manager App -> Menu -> Modules "+". This installs TWRP to both a/b partitions.
6. Install Magisk via Magisk Manager App again: Magisk Manager App -> hit install after your Magisk version ->hit "install to inactive slot"
7. Reboot your device
8. Reinstall your Magisk Modules(maybe a reboot is necessary)
Your device is now updated via local upgrade and you keep TWRP and Root:highfive:
If you have any issues, just feel free to ask!
@strongst you should maybe write in your guide that magisk flash is a must! Without phone won't boot if it's stock.
There are a lot of people who wanna flash TWRP without magisk. I don't know why they do that it makes no sense for me.
Kollachi said:
@strongst you should maybe write in your guide that magisk flash is a must! Without phone won't boot if it's stock.
There are a lot of people who wanna flash TWRP without magisk. I don't know why they do that it makes no sense for me.
Click to expand...
Click to collapse
I made it a little bit more clear, thanks, that's an common issue across several devices and requested often enough
Thank you for the quick tutorial. For me it looks very similar to the procedure with the OnePlus 5, am I right?
Does this indicate, that an EFS Backup is also to create the same way? https://forum.xda-developers.com/oneplus-5/how-to/oneplus-5-unlock-bootloader-flash-twrp-t3624877
BR
Axel
AxelM said:
Thank you for the quick tutorial. For me it looks very similar to the procedure with the OnePlus 5, am I right?
Does this indicate, that an EFS Backup is also to create the same way? https://forum.xda-developers.com/oneplus-5/how-to/oneplus-5-unlock-bootloader-flash-twrp-t3624877
BR
Axel
Click to expand...
Click to collapse
There's something different after unlocking the bootloader(which is the same). Twrp and magisk installation is different due to treble.
For EFS you can backup with twrp or local terminal
dd if=/dev/block/sdf2 of=/sdcard/modemst1.bin bs=512
Thanks for the guide, my OnePlus 7 came with 9.5.5 and I want to clean flash to the latest 9.5.8. I have already unlocked the bootloader, boot into TWRP and installed TWRP, are these the correct steps to flash 9.5.8 as I'm confused with the A/B partition?
1. Wipe data, cache, system and internal storage
2. Flash 9.5.8 signed flashable zip
3. Flash kernel and Magisk or the other way round?
Camack said:
Thanks for the guide, my OnePlus 7 came with 9.5.5 and I want to clean flash to the latest 9.5.8. I have already unlocked the bootloader, boot into TWRP and installed TWRP, are these the correct steps to flash 9.5.8 as I'm confused with the A/B partition?
1. Wipe data, cache, system
2. Flash 9.5.8 signed flashable zip
3. Flash kernel and Magisk or the other way round?
Click to expand...
Click to collapse
1. Wipe data, cache, system and internal storage
2. Flash 9.5.8 signed flashable zip with current twrp
3. Flash twrp installer zip with current twrp
4. Flash magisk zip with current twrp
5. Reboot
Make sure not to FORMAT internal data, otherwise you wipe the files you want to flash as it formats sdcard
strongst said:
1. Wipe data, cache, system and internal storage
2. Flash 9.5.8 signed flashable zip with current twrp
3. Flash twrp installer zip with current twrp
4. Flash magisk zip with current twrp
5. Reboot
Make sure not to FORMAT internal data, otherwise you wipe the files you want to flash as it formats sdcard
Click to expand...
Click to collapse
Thanks, so I boot into TWRP first and then do step 1 and 2? Also, which step should I flash custom kernel?
Camack said:
Thanks, so I boot into TWRP first and then do step 1 and 2? Also, which step should I flash custom kernel?
Click to expand...
Click to collapse
You need to do all steps. I recommend to flash the custom kernel when you've sucessfully booted the device at first.
Hi, a new OP7 User here. I wanted to know how can i keep my data decrypted? i have installed TWRP but i want to decrypt my data and also keep it the same after updated newer updates. Is it possible? I was able to do it on my OP3T, so wanted to know if its possible on OP7 as well
murti52 said:
Hi, a new OP7 User here. I wanted to know how can i keep my data decrypted? i have installed TWRP but i want to decrypt my data and also keep it the same after updated newer updates. Is it possible? I was able to do it on my OP3T, so wanted to know if its possible on OP7 as well
Click to expand...
Click to collapse
This should work https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389
strongst said:
This should work https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389
Click to expand...
Click to collapse
I think i messed up real bad, now when iam booting the phone, a message comes, your device is corrupt. It can't be trusted and will not boot.
murti52 said:
I think i messed up real bad, now when iam booting the phone, a message comes, your device is corrupt. It can't be trusted and will not boot.
Click to expand...
Click to collapse
That message is the bootloader unlocked warning and comes every time as soon as you unlocked the bootloader.
Flashing DM verity patch can only be done when you format internal storage which wipes everything of your internal storage. You can't "decrypt" your existing data permanently with this.
strongst said:
That message is the bootloader unlocked warning and comes every time as soon as you unlocked the bootloader.
Flashing DM verity patch can only be done when you format internal storage which wipes everything of your internal storage. You can't "decrypt" your existing data permanently with this.
Click to expand...
Click to collapse
No, this is not the same, i can't even go to fastboot or anything, it's hardbricked.
murti52 said:
No, this is not the same, i can't even go to fastboot or anything, it's hardbricked.
Click to expand...
Click to collapse
If you have really bricked it: https://forum.xda-developers.com/oneplus-7/how-to/op7-unbrick-tool-to-restore-device-to-t3954325
strongst said:
If you have really bricked it: https://forum.xda-developers.com/oneplus-7/how-to/op7-unbrick-tool-to-restore-device-to-t3954325
Click to expand...
Click to collapse
Sadly it didn't worked, as phone doesn't gets detected on pc, keeps on rebooting. Gave it to service center and they are also not able to solve it ??. So a replacement for me ?
Edit : i think the force decryption was the culprit. When i rebooted, system was crashing. Op3t had its specific force decrypt file, not a general one, So i think as the development moves forward, op7 will also get it's own. Hoping the best ?
murti52 said:
Sadly it didn't worked, as phone doesn't gets detected on pc, keeps on rebooting. Gave it to service center and they are also not able to solve it ??. So a replacement for me ?
Edit : i think the force decryption was the culprit. When i rebooted, system was crashing. Op3t had its specific force decrypt file, not a general one, So i think as the development moves forward, op7 will also get it's own. Hoping the best ?
Click to expand...
Click to collapse
This file also works on OP7 pro, so it should also work on normal op7. I think the issue comes from something other.
strongst said:
This file also works on OP7 pro, so it should also work on normal op7. I think the issue comes from something other.
Click to expand...
Click to collapse
Then there must be some issue with my flashing sequence. Btw, The service centre repaired the issue and i have rooted it and using bluespark with stock rom. I'll give the zip another try later on when a new update comes. Thanks for the help
I believe the default file system is ext4, is there any benefits changing it to f2fs?
Jacckz said:
I believe the default file system is ext4, is there any benefits changing it to f2fs?
Click to expand...
Click to collapse
A good and quick overview and comparison with oneplus 7 pro https://sparrowsnews.com/2019/08/13/difference-between-f2fs-and-ext4-file-system/
Root Samsung Galaxy S10 Series Android 12, WITHOUT Ramdisk Root Samsung S10+ - S10 - S10e SM-G97xxx, Stock Rom Android 12 - UI 4.1 Latest Version (I tested G970FXXSGHWC2) (Without combination keys for active Magisk after normal restart – Without press power key for warning massage booting)
How to root:
1. Extract your downloaded Rom and patch AP file with magisk (Recovery Mod)
2. Go to download mode.
3. Uncheck auto reboot in Odin.
4. Flash your patched AP file with BL CP CSC.
5. When flash passed, again we should go to download mode.
6. Hold volume down and power key, and after vibration release power key and hold Bixby key and volume down for going to download mod again.
7. Reset Odin and again uncheck auto reboot, put twrp recovery,
To AP and flash, it.
8. When passed, we need again reset and go to twrp recovery, volume down power key, after vibration release volume down and hold volume up and bixby key with power key after splash release power key and hold your volume up and bixby for 1 second then release.
9. We should be in twrp recovery mod, format data, rename magisk.apk to magisk.zip, copy magisk.zip, kernel, multi disabler and twrp boot logo to the sd card.
10. Mount your sd card and install first magsik.zip, then multi disabler, twrp boot logo and finally kernel.zip
11. Restart to system.
12. After booting to android 12 open the magisk app and let download the latest version.
13. When download finished open magisk, you will see one massage for install complete magisk after reboot in 5 seconds, cancel it and go to setting and active Zygisk and Magisk Hide, rename it.
14. When magisk hide process finished. Open again magisk, you will see the reboot massage again.
15. Tap ok and wait for rebooting.
Fix Internal Storage Size:
First Format Data.
If it doesn't work :
Boot into TWRP recovery.
Select Wipe » Advanced Wipe.
Tick/check the Data partition.
Select Repair or Change File System button.
And lastly, select Resize File System button. (Let TWRP resize your file system. It might take some time, have patience)
After reboot, your galaxy is rooted without any problem. And you can install modules zips. And enjoy your root same stock Rom without any opened bootloader warning massage first of booting android. And without press power key after that.
---------------------------------------------------------------------------------------------------------
UPDATED (G970FXXSGHWC2) Android 12 - One UI 4.1 - March 2023For update your android without losing data, follow these steps:1. Download: One of Kernels - Multidisabler Samsung 3.5 - TWRP Bootlogo Patch - Magisk - Odin 3.14.1-3B Patched.
2. In Odin uncheck Auto reboot, flash (BL - Patched AP File with Magisk - CP - Home CSC).
3. Reboot manual to download mode again, Flash TWRP Recovery in AP slot.
4. Reboot to TWRP recovery, flash Magisk.zip, Kernel and Multidisabler then TWRP Bootlogo.
5. Reboot to system and finished.
Download the latest Firmware version for your galaxy here: https://samfirms.com
Download the latest TWRP recovery version for your galaxy here: https://twrp.me/Devices/Samsung/Download the latest Magisk version for your galaxy here: https://github.com/topjohnwu/Magisk/releases
Special Thanks to Ambasadii Dev. And CruelKernel Develop Team For Kernels. Magisk Dev. TeamWin For TWRP Recovery And Odin3 Patched.
Happy to see your post!
I have Android 11 FUL1, with Magisk 23000 (last versioin with Magisk Hide and Modules) and last Official Twrp and I want to pass to Android 12.
So my question:
May I patch android 12 AP file G970FOXMEGVA4 and patch also twrp but under Android 11 and Magisk 23000?
My aim is to maintain the Twrp already present and to avoid to install stock Android 12 only to patch AP file and twrp.
Then I should start immediately with Odin, AP patched, twrp patched, multidisabler, kernel and all the orther things.
Is this possible?
And just for info, your kernel is the same as Ambasadii rom?
will try but, what to do with Downloaded Kernel?
Hello everybody, thans for the work.
I tried your method but it's not working for me.
All is good until step 7.
At Step 8, the phone restarts good on TWRP but a script is executing and the phone restarts.
On this restart, i do like you explain (hold volume up and bixby key with power key after splash release power key and hold your volume up and bixby for 1 second then release) but the phone don't restarts in TWRP and the phone vibrate instead, then the phone is freeze on SAMSUNG logo
EDIT : A resolved it by flashing the CSC file instead of the CSC HOME file.
is.Mehrdad said:
Root Samsung Galaxy S10 Series Android 12, WITHOUT Ramdisk
Root Samsung S10+ - S10 - S10e SM-G97xxx, Stock Rom Android 12 Latest Version (I tested G970FOXMEGVA4)
(Without combination keys for active Magisk after normal restart – Without press power key for warning massage booting)
Sorry For Bad ENGLISH
https://1drv.ms/w/s!AiUnkR9HkhduiqRfflrkvHqg5Ai_lQ?e=fIGiFi
Downloads:
1. Download the latest stock ROM for your galaxy here: https://samfirms.com
2. Magist the Latest Version 24.0: https://bit.ly/3rYnEzQ
3. Kernel: https://bit.ly/3o55bR1
4. TWRP Recovery, The Latest Version: https://bit.ly/3ADTk1F
5. MultiDisabler: https://bit.ly/3r693mY
6. TWRP Boot logo: https://bit.ly/33TNrRT
7. Odin 3.14.4: https://bit.ly/3o67YcG
How to root:
1. Extract your downloaded Rom and patch AP file with magisk (Recovery Mod)
2. Go to download mode.
3. Uncheck auto reboot in Odin.
4. Flash your patched AP file with BL CP CSC.
5. When flash passed, again we should go to download mod.
6. Hold volume down and power key, and after vibration release power key and hold Bixby key and volume down for going to download mod again.
7. Reset Odin and again uncheck auto reboot, put twrp recovery,
To AP and flash, it.
8. When passed, we need again reset and go to twrp recovery, volume down power key, after vibration release volume down and hold volume up and bixby key with power key after splash release power key and hold your volume up and bixby for 1 second then release.
9. We should be in twrp recovery mod, wipe data, rename magisk.apk to magisk.zip, copy magisk.zip, kernel, multi disabler and twrp boot logo to the sd card.
10. Mount your sd card and install first magsik.zip, then multi disabler, twrp boot logo and finally kernel.zip
11. Restart to system.
12. After booting to android 12 open the magisk app and let download the latest version.
13. When download finished open magisk, you will see one massage for install complete magisk after reboot in 5 seconds, cancel it and go to setting and active Zygisk and Magisk Hide, rename magisk to “manage” (without R).
14. When magisk hide process finished. Open again magisk, you will see the reboot massage again.
15. Tap ok and wait for rebooting.
After reboot, your galaxy is rooted without any problem. And you can install modules zips. And enjoy your root same stock Rom without any opened bootloader warnning massage first of booting android. And without press power key after that.
Click to expand...
Click to collapse
Fantastic instructions! Worked like a charm....except that my internal storage has gone from 128gb, to 32gb.
How can this be resolved?
I notice that the instructions did not include flashing vbmeta. Could this be problem?
BlaqqSL8 said:
Fantastic instructions! Worked like a charm....except that my internal storage has gone from 128gb, to 32gb.
How can this be resolved?
I notice that the instructions did not include flashing vbmeta. Could this be problem?
Click to expand...
Click to collapse
After step 8 you are in TWRP Recovery, You must “Format Data” in TWRP then again boot your device to TWRP recovery. After Wipe data, vbmeta and your storage will be fixed.
Be careful, After Wipe Data don't boot in OS, because you must pass other steps before boot to OS.
bruram said:
Happy to see your post!
I have Android 11 FUL1, with Magisk 23000 (last versioin with Magisk Hide and Modules) and last Official Twrp and I want to pass to Android 12.
So my question:
May I patch android 12 AP file G970FOXMEGVA4 and patch also twrp but under Android 11 and Magisk 23000?
My aim is to maintain the Twrp already present and to avoid to install stock Android 12 only to patch AP file and twrp.
Then I should start immediately with Odin, AP patched, twrp patched, multidisabler, kernel and all the orther things.
Is this possible?
And just for info, your kernel is the same as Ambasadii rom?
Click to expand...
Click to collapse
No, not working, you should install multidisabler and other files in twrp recovery.
Kernel is same
DelNero said:
Hello everybody, thans for the work.
I tried your method but it's not working for me.
All is good until step 7.
At Step 8, the phone restarts good on TWRP but a script is executing and the phone restarts.
On this restart, i do like you explain (hold volume up and bixby key with power key after splash release power key and hold your volume up and bixby for 1 second then release) but the phone don't restarts in TWRP and the phone vibrate instead, then the phone is freeze on SAMSUNG logo
EDIT : A resolved it by flashing the CSC file instead of the CSC HOME file.
Click to expand...
Click to collapse
Happy for resolved problem.
But I wrote in step 4 CSC File, Not CSC Home.
4. Flash your patched AP file with BL CP CSC.
is.Mehrdad said:
After step 8 you are in TWRP Recovery, You must “Wipe Data” in TWRP then again boot your device to TWRP recovery. After Wipe data, vbmeta and your storage will be fixed.
Be careful, After Wipe Data don't boot in OS, because you must pass other steps before boot to OS.
Click to expand...
Click to collapse
Thanks for the quick reply.
Just one more thing: Can I flash vbmeta in the CP slot, at the same time as flashing TWRP in the AP slot? Or do I have to flash them individually?
BlaqqSL8 said:
Thanks for the quick reply.
Just one more thing: Can I flash vbmeta in the CP slot, at the same time as flashing TWRP in the AP slot? Or do I have to flash them individually?
Click to expand...
Click to collapse
I don't think so
What is exactly the problem with vbmeta ?
is.Mehrdad said:
I don't think so
What is exactly the problem with vbmeta ?
Click to expand...
Click to collapse
There's no problem with vbmeta that I know of. It's just that, following your instructions, I still only have 32gb of internal storage instead of 128gb.
It would really help if you could update your instructions to include flashing the vbmeta file either via Odin, or using vbmeta.img in TWRP.
BlaqqSL8 said:
There's no problem with vbmeta that I know of. It's just that, following your instructions, I still only have 32gb of internal storage instead of 128gb.
It would really help if you could update your instructions to include flashing the vbmeta file either via Odin, or using vbmeta.img in TWRP.
Click to expand...
Click to collapse
Test this, if not working, I will test again all of my files.
After flash your patched AP, Boot to TWRP and mount all of your partitions, then restart again to twrp recovery and then do Wipe Data and again reboot to recovery for flash other files.
Boot into TWRP recovery.
Select Wipe » Advanced Wipe.
Tick/check the Data partition.
Select Repair or Change File System button.
And lastly, select Resize File System button. (Let TWRP resize your file system. It might take some time, have patience)
is.Mehrdad said:
Test this, if not working, I will test again all of my files.
After flash your patched AP, Boot to TWRP and mount all of your partitions, then restart again to twrp recovery and then do Wipe Data and again reboot to recovery for flash other files.
Boot into TWRP recovery.
Select Wipe » Advanced Wipe.
Tick/check the Data partition.
Select Repair or Change File System button.
And lastly, select Resize File System button. (Let TWRP resize your file system. It might take some time, have patience)
Click to expand...
Click to collapse
From reading many posts\instructions on how to install\root A12, I think that, where you say "WIPE DATA", It should be FORMAT DATA - YES.
I'm going to try it that way, and will let you know ow it goes.
BlaqqSL8 said:
From reading many posts\instructions on how to install\root A12, I think that, where you say "WIPE DATA", It should be FORMAT DATA - YES.
I'm going to try it that way, and will let you know ow it goes.
Click to expand...
Click to collapse
Thanks, I edited my post to Format Data.
So I followed all the steps. I did everything and everything worked as it should. However, when I get to magisk wanting to update, it does so, patches everything successfully but on restart, I get a bootloop.
Hello. Does anybody try to do it on USA Snapdragon model?
How do we install magisk with ap file?
patched ap file I did as you said but it won't load. It gets stuck loading system.img.
VenfefulRat said:
So I followed all the steps. I did everything and everything worked as it should. However, when I get to magisk wanting to update, it does so, patches everything successfully but on restart, I get a bootloop.
Click to expand...
Click to collapse
Same thing here....
Impossibile to update magisk
Gamras606 said:
patched ap file I did as you said but it won't load. It gets stuck loading system.img.
Click to expand...
Click to collapse
Uninstall Samsung drivers and install it again, reboot your pc and check it again with another USB port.