I am desperate here. After installing the TWRP, you can still see the Poco logo instead of the Redmi after booting. On the PC the Poco 2 is recognized as Redmik30pro Safetynet etc dont pass. What i can do?
Which ROM?
Hi, thanks for answering first. It is the eu weekly 20.12.10
Weekly is beta,you must use magisk for Safetynet ..
Maybe try here:https://forum.xda-developers.com/t/...droid-11-and-magisk-on-xiaomi-eu-rom.4170031/
Sorry for the late responce. Thanks, but i have tried magisk. I got it now. My phone dont sccept k30pro twrp. so i flashed original chines firmware k30Pro. Installed twrp and it still boots as K30Pro. Flashed eu again,than magisk and see there, it works
!bigbabba said:
Sorry for the late responce. Thanks, but i have tried magisk. I got it now. My phone dont sccept k30pro twrp. so i flashed original chines firmware k30Pro. Installed twrp and it still boots as K30Pro. Flashed eu again,than magisk and see there, it works
Click to expand...
Click to collapse
Last weekly and stable eu rom have playstore certified and pass safetynet without root.
Related
I was trying to root several roms for hours! with latest TWRP version, no matter wich method I used, the result was always a non-rooted device.
After too much hours, I decided to go back to TWRP 3.1.1-0, and it rooted my phone at once (MIUI v11 Android 10.0).
SO, dont try to root anything with latest TWRP because it simply doesnt work to root.
(apparently wasnt working due to Multirom, I have to do some tests)
I hope this help some guy wich is going crazy trying to root Android 10 (or older).
Magisk 20.0 with twrp 3.3.1-1 worked perfectly fine for me. I did it on xiaomi.eu miui11 - android 10.
malimukk said:
Magisk 20.0 with twrp 3.3.1-1 worked perfectly fine for me. I did it on xiaomi.eu miui11 - android 10.
Click to expand...
Click to collapse
Hmmm... No way for me ?
Worked as always for me. Used the official version from the homepage and flashed magisk version 20 with it.
No problems so far, everything works fine. Safety net passes also.
Did you get any error messages when flashing?
kleinholzinferno said:
Did you get any error messages when flashing?
Click to expand...
Click to collapse
No, the process ends without any error, but Magisk Mgr doesnt detects to be rooted.
Maybe was a multirom error (as primary rom) but have so do some tests .
Hi everyone,
I had recently upgraded to android 10 (clean flash) and installed TWRP and Magisk and everything was fine. However, one fine day, I performed a random reboot and my phone got stuck in a bootloop. I proceeded to boot into TWRP and flashed Magisk uninstaller and the phone booted again. But now, the problem is that every time I try to flash Magisk, I end up in the same bootloop. I am unsure how to get Magisk installed again and I don't want to Clean flash and set up the device all over again.
Please help me out XDA.
Thank you!
ImperatorShade said:
Hi everyone,
I had recently upgraded to android 10 (clean flash) and installed TWRP and Magisk and everything was fine. However, one fine day, I performed a random reboot and my phone got stuck in a bootloop. I proceeded to boot into TWRP and flashed Magisk uninstaller and the phone booted again. But now, the problem is that every time I try to flash Magisk, I end up in the same bootloop. I am unsure how to get Magisk installed again and I don't want to Clean flash and set up the device all over again.
Please help me out XDA.
Thank you!
Click to expand...
Click to collapse
Hello,
Which instruction did you follow?
What version of rom, twrp and magisk did you have? (maybe with file names).
strongst said:
Hello,
Which instruction did you follow?
What version of rom, twrp and magisk did you have? (maybe with file names).
Click to expand...
Click to collapse
Thank you for the response strongst!
I am using the 10.0.1 GM57AA build right now. Updated directly from 10.0.0 by flashing rom in local updater, then without reboot, flashed twrp installer and magisk in inactiv slot, in magisk iteslf (followed your guide and the one Kollachi had put up).
Magisk version is 20.1 and TWRP version is 3.3.1-70.
Everything was working fine for about two months before one reboot started causing the bootloop. (I made no other changes to magisk before this reboot)
Thanks!
ImperatorShade said:
Thank you for the response strongst!
I am using the 10.0.1 GM57AA build right now. Updated directly from 10.0.0 by flashing rom in local updater, then without reboot, flashed twrp installer and magisk in inactiv slot, in magisk iteslf (followed your guide and the one Kollachi had put up).
Magisk version is 20.1 and TWRP version is 3.3.1-70.
Everything was working fine for about two months before one reboot started causing the bootloop. (I made no other changes to magisk before this reboot)
Thanks!
Click to expand...
Click to collapse
Maybe you did have any magisk modules left?
Have you tried an older magisk version?
strongst said:
Maybe you did have any magisk modules left?
Have you tried an older magisk version?
Click to expand...
Click to collapse
Thanks for the fast response! Yes, I tried Magisk 19.3 ver but got the same issue.
ImperatorShade said:
Thanks for the fast response! Yes, I tried Magisk 19.3 ver but got the same issue.
Click to expand...
Click to collapse
And are there any magisk modules or mods left? It can be the reason for this.
Are there any errors within the log while flashing?
You have the twrp guacamole unified from mauronofrio 3.3.1-70, right? You can try 3.3.1-73 if you want.
There were no errors when flashing. But I'm not sure whether I had disabled Magisk Modules before flashing OxygenOS 10. Anyway, what would be the best way to untwrp and clean flash?
Since kernel releases are yet to be published " a total duck move by xiaomi ?" I wanted to keep on using the stock ROM without changing anything but miui is too cringy for me to live with it, so I need to put the ol'rooting hat once again
My question is.. did any one actually root it using magisk and can still get ota , or you would need to uninstall magisk then update then get magisk again?
Also what happens to TWRP , can it coexist with miui ?
I had a previous xiaomi phone (mido) but tbh I never even thought of using the miui and switched to RR once I unlocked the bootloader ?
You can get ota with magisk but updating will rewrite boot and recovery so you'll need to re-root.
mr-mero said:
My question is.. did any one actually root it using magisk and can still get ota , or you would need to uninstall magisk then update then get magisk again?
Also what happens to TWRP , can it coexist with miui ?
Click to expand...
Click to collapse
FYI, I'm still on stock EU v12.0.3.0 with mauronofrio TWRP and rooted with Magisk.
I got two OTAs already, the last with v12.0.4.0 -- and it even tried to apply one of them while I wasn't looking but it obviously failed, since there's no stock recovery.
pnin said:
FYI, I'm still on stock EU v12.0.3.0 with mauronofrio TWRP and rooted with Magisk.
I got two OTAs already, the last with v12.0.4.0 -- and it even tried to apply one of them while I wasn't looking but it obviously failed, since there's no stock recovery.
Click to expand...
Click to collapse
What if I reflash the stock recovery.img after rooting, that might get the ota working ?
Yes I know I would still have to flash twrp and magisk again after it
I'll test it on my old phone first , hope it can work as a reference for one last time of it's miserable life
mr-mero said:
What if I reflash the stock recovery.img after rooting, that might get the ota working ?
Click to expand...
Click to collapse
I thought the same, but then I'm not keen on moving to v12.0.4.0 right now, so I didn't budge. Let us know how it goes. :good:
.
How to install magisk on stock miui global after bootloader unlock?
@coolboy744:
In case you haven't already, you'll have to install a custom recovery first...
.
pnin said:
@coolboy744:
In case you haven't already, you'll have to install a custom recovery first...
.
Click to expand...
Click to collapse
yes i know that. using since 2015 TWRp. but i heard there is system wipe issue on poco twrp. if you installed it confirm
No issue here, just flashed it through TWRP as usual.
.
what about installing magisk from orangefox? What are the steps?
abubin said:
what about installing magisk from orangefox? What are the steps?
Click to expand...
Click to collapse
Still the same, just flash the root file and reboot it up... And also install magisk manager to have root management
Orange Fox is much more recommended for our Poco by ManoloRey for installing AOSP ROMS...
yan2xme said:
Still the same, just flash the root file and reboot it up... And also install magisk manager to have root management
Orange Fox is much more recommended for our Poco by ManoloRey for installing AOSP ROMS...
Click to expand...
Click to collapse
thanks! done it and it is working now.
Hi,
how to know if a version of twrp is good for my device,
i mean i read some post about the different versions of twrp and sometime bootloop happen with 3.4.2b sometime with 3.4.1 or chinese LWR.
I want to install magisk over stock 12.0.4 Global but am a bit afraid with all the versions of TWRP and bootloop problem for my Poco F2 Pro 8/256 with stock 12.0.4 QJKMIXM...
Subsidiary question: When can we expect to have an official version of twrp?
Thanks by advance.
Well, pick anyone, I'm personally using LRTeam TWRP.
Just backup your data and if you'r stuck in a bootloop you can try flash another or reflash your stock ROM with miflash.
yzena said:
Well, pick anyone, I'm personally using LRTeam TWRP.
Just backup your data and if you'r stuck in a bootloop you can try flash another or reflash your stock ROM with miflash.
Click to expand...
Click to collapse
Okay i will do this! thanks
New here...
I was using lineage 18.1 unofficial on my poco x3 nfc... worked well.
I flashed the latest surya Lineage 18.1 official... (followed the guide on recoverymode dot com)
after flashing, phone will begin loading the lineage logo... after 30 to 40 seconds it restarts and goes back into TWRP.
In TWRP there is now a warning/error message in red letters....
"android rescue party trigger! possible solutions? either 1.wipe caches, and/or 2.format data, and/or 3. clean flash rom"
I tried going back to the 18.1 unofficial lineage rom... same behavior and message....???
I read a lot online and believe it may be Magisk but am at a loss as to how to proceed and fix the issue to get my phone working again !
TWRP 3.5.2
Magisk 23.0
Any solutions, advice welcome... first post here so hoping some Big BRAIN has a fix for me... thanks in Advance !
Flacoustix said:
was using lineage 18.1 unofficial on my poco x3 nfc... worked well.
I flashed the latest surya Lineage 18.1 official... (followed the guide on recoverymode dot com)
Click to expand...
Click to collapse
You should follow the instructions given in the official Lineage thread.
It's not possible to dirty flash official Lineage over unofficial.
If you want to take the safe route:
- Flash latest MIUI fastboot ROM (don't relock your bootloader)
- Flash TWRP recommend in the Lineage thread
- Flash Lineage, GApps, Magisk according the instructions in the Lineage thread
thanks for your speedy reply...
yes I want to take the "safe route"
I am downloading the latest MIUI fastboot rom.... do I install with MiFlash tool or adb?
I have only been at this game a few months and have had no problems up until now... still a bit green...
Thanks in advance
Flacoustix said:
thanks for your speedy reply...
yes I want to take the "safe route"
I am downloading the latest MIUI fastboot rom.... do I install with MiFlash tool or adb?
I have only been at this game a few months and have had no problems up until now... still a bit green...
Thanks in advance
Click to expand...
Click to collapse
Use Miflash tool. Once you successfully flashed MIUI, the rest is rather easy
Cheers m8... many thanx !!!