Related
Hi All,
I'm trying to map network drive using the Resco Explorer, however Resco does not see the SAMBA (3.2.5) shares
There is nothing in sambas log suggesting the HD2 is trying to connect.
I had no problems with wm6.1 but on my 6.5.x it doesn't work.
I was searching the forum but couldn't find the answer. Anyone has an idea? Maybe someone managed to solve this?
maybe this?
pepesz said:
Hi All,
I'm trying to map network drive using the Resco Explorer, however Resco does not see the SAMBA (3.2.5) shares
There is nothing in sambas log suggesting the HD2 is trying to connect.
I had no problems with wm6.1 but on my 6.5.x it doesn't work.
I was searching the forum but couldn't find the answer. Anyone has an idea? Maybe someone managed to solve this?
Click to expand...
Click to collapse
instead of COMPUTER\DISK, try this: \\COMPUTER\SharedDocs (=name of the shared folder on my pc)
this works with me, good luck!
bramgg said:
instead of COMPUTER\DISK, try this: \\COMPUTER\SharedDocs (=name of the shared folder on my pc)
this works with me, good luck!
Click to expand...
Click to collapse
Yep, I did exactly this the other day.
Resco doesn't see samba shares directly (like a windows PC would see them in my network places or whatever), so you have to tell Resco the location.
I have an ubuntu server called "ubuntu", and my shares are "music", "photos" and so on. To get resco to see the shares I typed:
\\ubuntu\music
\\ubuntu\photos
etc...
Note, it wont work based on IP addresses (that was what originally caused my problem).
To find out your PC name (if you don't know it) on a windows machine, hold the windows key, hit pause break, and then click on computer name (this is for XP).
Cheers.
blog post about this very subject
I got it too sometimes. I dont know the reason tho.
But hey it is so easy to set it up manually.
It is longer but will work anyways. Try the method the guy 2 posts above me posted with \\COMPUTERNAME\SHAREDFOLDER
WIll work if you are in the same network.
Ah and make sure not to connect via mobile network but with WiFi as then you are not in the same net.
Thanks all of you!
It works at least partially...
Works for shares without password, doesn't work for password protected shares.When i put \\computer\myshare and then press ok then I'm asked for user name and password. As soon as I fill them in the application freezes (maybe it tries to connect?) I gave it 5 minutes and then I had to reset HD2
Strange problem
I reinstalled resco but no improvements.
Thanks again
Yeah i noticed that one too.
Do not use pass protection on shares.
It must be a bug in the Resco Explorer.
Before i thought i made a fault but i never tried it out again as i assume a freeze as not too good for the device LOL
I'm not sure where the problem is. I tried the same on P3600 (trinity) with wm6.5. It does not freeze, but is re-asking for credentials, so I guess there are two problems:
1) resco on hd2 freezes (probably when the resco cannot connect - bug)
2) authentication problem?
Probably I'll skip the password protection until someone will find the solution...
Works fine here. It sees the shares on my XP machine, but not on the 2 Win7 ones so I have to enter them manually for those. All 3 have password protection.
On one of the W7 machines it "freezes" for about 10 seconds the first time I access the share after a soft reset, for the others it comes instantly. But that particular volume is huge (a 80% full 1.5TB drive) so it might have to do with it if it lists the contents, the others only have like 30GB on them.
You might want to try menu->settings, if you have data active as well as wifi then uncheck autodetection, and delete the network entry (or entries) that aren't your local wifi.
It can happen that it finds nothing or hangs if it tries searching the cell provider's network (that can have tons of hosts) instead of your local one.
kilrah said:
Works fine here. It sees the shares on my XP machine, but not on the 2 Win7 ones so I have to enter them manually for those. All 3 have password protection.
Click to expand...
Click to collapse
Yes - no problem for windows, I'm struggling with SAMBA (linux) shares.
Fixed freezing/credential issues when mapping drives on my HD2
Hi guys,
I had the same problem of my HTC HD2 freezing in the Network Log On dialogue when trying to map a drive, and also the issue where I was repeatedly asked for credentials which would never save. I managed to solve this issue, though in my case the problem was actually due to the network share settings on my NAS device (which is a QNAP TS-109).
What I did to remedy my problem was:
Go to the Administration page through the web-based interface for my TS-109.
Go to the Access Right Management menu.
Go to the Share Folders section.
Click on the Access Control icon for the folder I wanted to map.
Under the Guest Access Right drop-down menu I changed Deny Access to Read Only.
After that I was able to log in with my admin username and password, and to save the mapped drive on my HTC HD2 (I mapped drives successfully using both Resco File Explorer 2010 and HTC Network Plugin 1.0).
Hopefully this will work for anyone else experiencing this problem with a QNAP NAS, or if not then hopefully following similar steps on your NAS will yield favourable results.
Kate.
I am using HD2 with a Qnap NAS . Initially , got problem mapping drive as described by previous post . I did not do any changes on NAS . But , in the resco password page , i uncheck permanent login . Seems did the trick . Able to mapped folder on the NAS , even Hidden folders also . Hope this helps .
pagoda123 said:
I am using HD2 with a Qnap NAS . Initially , got problem mapping drive as described by previous post . I did not do any changes on NAS . But , in the resco password page , i uncheck permanent login . Seems did the trick . Able to mapped folder on the NAS , even Hidden folders also . Hope this helps .
Click to expand...
Click to collapse
I've post this in Resco Explorer Forum, just yesterday:
Re: File Explorer hangs when mapping Network Drive on WM 6.5
First, excuse me for my bad english (I'm italian).
I think to be solved the bug in this mode (I've a Netgear STORA NAS):
- select "Work" instead of "Internet settings" in wi-fi network adapter
- select "Work" instead of "Internet settings" in your wi-fi connection
Now, I can succesfully map all my shared resources and add them in "My Network", but I can't use wi-fi to connect in Internet.
So I've revert both the above settings to "Internet settings" ad all it's ok, browsing in Internet and accessing to my network folder on NAS.
I think that the bug is present only when we try to map a network folder the first time.
I hope to be useful to solve our problem.
Bye
Although last post is long time ago, and mine is too recent. yet I hope it would be useful to somebody, and be able to repay the great advantages I myself got from XDA forum.
HardwareC with Win7 Home Prem, HTC HD2 with RescoExplorer v.8, Wifi Connection
first, as most of the posts, I can see PC while mapping in RescoExplorer.
yet when expanding the +, I had to enter username and password, then I get an error.
well, what I did is that I shared a folder with everyone full access on my PC.
then on resco mapping I typed the full path, i.e. \\computername\sharedfolder
then, I got it...
NOTE: when exiting Resco, and accessing the mapped folder, I still had to enter my windows username and password to access my PC shared folder that has no password...
Thus, I think when sharing a folder with a password, Resco goes nuts. for two passwords must be applied...
*edit- For some reason, this thread got posted in Android Software and Hacking general instead of Android apps and games :-|
Hey everyone, its me again.
I have recently been using an app called Paw Server for Android. Though it may seem stupid, this app can really come in handy. The app itself is a utility for managing messages, contacts ect.. But what many people do not realise is that you can host your own website on it, wherever you go. Though this will only work over wifi, you can optionally do some port forwarding to make the site accessible over the internet.
To put a custom website on the server, do the following
1. Install PAW Server for android.
2. Mout your phone's SD-Card On your computer
3. This step has two options:
A Website:
Put your website files in /paw/html/ and make sure the index.html is in this directory. (If you need help creating a site, please visit http://cyanstatic.com)
A File explorer:
If creating a website is too much of a hassle, you can just put some files that you would like to access from your browser in /paw/html/. I Put a couple of songs and videos in the folder and had no trouble streaming the files to my browser.
4. Now open PAW and press the 'Start" Button.
Congratulations!
Your website/chosen files should now be accessible from your browser
i use swiftp, does pretty much that, though it is dedicates to do so, so i think it's a bit more comfortable
This is a great tool
Will give it a shot
doenis said:
i use swiftp, does pretty much that, though it is dedicates to do so, so i think it's a bit more comfortable
Click to expand...
Click to collapse
Really? So can swiftp run a web server or just file services?
Wow amazing!
Sent from my HTC Vision using XDA App
I used PAW Server to host a WIKI on my Nexus One
I used PAW Server to host a WIKI on my Nexus One....
And it almost worked!
tiddlywiki (google it, I'm new and can't do links) is a one page wiki written in, I can't really tell because the tiddlywiki page doesn't do much about talking about how it works.
But PAW serves the pages, and some of the read/browse functions seem to work -- but I was unable to figure out how to edit a page -- and that could just be my fault.
And installing the wiki was pretty easy. I downloaded the zip file to my pc, moved it into my dropbox directory, unpacked it into a directory called wiki, and then on my phone, I synced drop box, and I moved the wiki directory into the paws/html directory. And it served up the page just fine.
But I couldn't edit it.
Why does it ask for permissions to everything? ie Camera, Vibrate, etc....
This maybe unintentional with the manifest, but it looks awfully rogue when programs look for permission to things they don't use.
Very cool thanks for the share! Tough it doesn't make much sense serving via mobile, but i might give it a shot and see if I can use some DNS servers too, starting with dyndns.org
Check out Wifi Remote Access for Windows Mobile: You can do the same thing, but it also comes with a whole range of other stuff.
To edit it, you just need to go into program file, and add a folder inside public (I think) with all your website files. Then change Wifi Remote Access's default.html to redirect you there,instead of to /fs/
mik101 said:
Why does it ask for permissions to everything? ie Camera, Vibrate, etc....
This maybe unintentional with the manifest, but it looks awfully rogue when programs look for permission to things they don't use.
Click to expand...
Click to collapse
This is because it comes with a site on it for managing your phone, like take pictures from the browser and send sms.
With the server it is also possible to develop web applications that use the Android API.
That's also a reason (apart from the web interface mentioned by GlobaL_TroTTer) why there are so many permission requested.
Great find! This is going to be very beneficial to me if I ever misplace my phone around the house or at school. It also has several features that are invaluable IMHO.
Great App - but not working on Verizon network
PAW Server is a real gem... it works great in a LAN/WiFi environment.
Unfortunately, it appears that Verizon Wireless doesn't route ANY traffic that is not initiated by the phone/user.
So thi nice little personal web server is unreachable over the air.
Same for Telnet, FTP, etc.
If anyone has a working app (on a Verizon network) - reachable FROM the net - please let me know!!
Android Port Forward?
GlobaL_TroTTer said:
*Though this will only work over wifi, you can optionally do some port forwarding to make the site accessible over the internet.
Click to expand...
Click to collapse
I'm trying to access the server without connecting through wifi. Is this even possible?
Thanks
I've played around with PAW Server. I like the PHP Plugin. I created an offline UPC scanner web app (for retail inventory) in PHP/JS/WebSQL which synched with a remote server. It eventually turned into a Phonegap app.
Directory Permissions
Does anyone have a link to some documentation regarding "Directory Protection" part of PAW?
It mentioned that granting permissions to certain folders must follow the following format
relative-directory:auth-type:realm:users
with a sample of
/test:basic:Test Real:user
But I don't know what auth-types are available. I'd like to grant a certain folder read permissions to everybody.
I just have to say that setting up my own website with PAW was super easy (10 easy steps):
1) Install PAW and start up server: google PAW android
2) Find external IP: google "what's my IP"
3) Go to router (192.168.0.1 or 192.168.1.1 ) and enable port forwarding to your android for the port you used.
4) Set up PHP: Use browser to hit server(192.168.1.?), sign in, go to add-ons, setup PHP, transfer unzipped folder to /sdcard/paw/html/app/plugins/ and restart PAW server
5) create file (mypage.php) with contents(<html><head></head><body><?php echo '<p>Hello World again</p>'; ?> </body></html>) and place it in /sdcard/paw/html/app/
6) Navigate to [myexternalIP]:[myport]/app/mypage.php (note requires login) Unless you changed the port number it defaults to 8080
7) Register for a free domain: no-ip.com
8) Modify host to have "Port 80 Redirect" to the port you configured (typically 8080)
9) Fix permissions on certain folders so joe blow can hit my server <---- How to do this part????
10) Profit!
Please read the whole guide once before trying. This will help in making the process easy as most of the parts are covered in detail.
1. Introduction:
You got a file in Windows PC and you intend to transfer it to your Android device. The most common way is that we connect the device to system via USB cable. However there are alternatives such as the Bluetooth or Wi-Fi. Bluetooth is a very slow method when compared to USB and Wi-Fi. So let us take Wi-Fi as the medium. Now let me first tell you various advantages and disadvantages regarding USB when compared with WI-Fi:
Disadvantages of USB v/s Wi-Fi
1. The phone should be near to the system = you being near the system too ---- This is avoided. All you need that the PC and device to be connected to the Wi-FI network
2. Cluttering of wires ---- Avoided
3. Drivers may have to be installed ---- No drivers needs to be installed
4. In a whole way, its not very productive ---- Oh very productive
Advantages - the only one is that files transfer speed is high ---- Yes. USB has a upper hand here. Wi-Fi transfer speed is low when compared. But the difference is just a few minutes. We can live with that
So excited to start using the Wi-Fi method? Then make sure you meet the requirements.
2. Requirements:
1. Wi-Fi router - PC should be connected to this either through LAN/ Wi-Fi
2. Install ES File Explorer in your Android device (you can try other file explorers like FX File Explorer, Solid Explorer, Astro File manager). The methodology for other apps are quite similar. I will take ES File Explorer as example as I have found it to be simple and fast.
3. Windows PC with 2000/XP/Vista/7/8 (I have not tested in Windows 8 personally)
4. Administrative access for Windows PC
3. Steps:
Step 1. Install ES File Explorer
Step 2. Find IP Address, make static IP and find system name [optional]
i. Find your IP address - to do this follow the steps as below:
a. Start -> Run (or press Windows key + R)
b. Type "ncpa.cpl" (without quotes) and press enter
c. You will see the Network Connections now
d. Identify the one which is connected to the Wi-Fi router. It will be either the LAN adapter or Wireless adapter. In my case it is the Wireless adapter.
e. Double click on the connection
f. Click on details and here note down the IPv4 Address. Also make not of IPv4 Subnet Mask, Default Gateway and DNS Server.
View attachment 1343982
ii. If you are going by IP address method then it is better yet to make the IP address as static [thank you kjplasma for the tip].
An static IP address means that your system will be having the same IP address all the time and will not be changed anytime later by the router. To set static IP address:
a. Go to Network Connections
b. Double click on the connection
c. Click on properties
d. Double click on - Internet Protocol Version 4 (TCP/IPv4) and fill up the IP address as you have noted them down above.
e. Click on OK for all dialogue boxes.
View attachment 1343983
iii. You can even make note of the system name by checking the properties of “My Computer”. To do this:
a. Go to Start - Right click on My Computer [Shortcut -> Windows + Pause/Break]
b. You can find the computer name under "Computer name, domain, and workgroup settings"
View attachment 1343984
If your going by this method then it is not necessary to note down or change the IP address. However I feel that tracking your system through IP address in ES File Explorer is much more efficient and fool proof. Either the system name or IP address its okay.
Step 3.a. Windows 2000 PC
i. Open ES File Explorer in your device
ii. On top right corner tap on "Local" - select LAN
iii. Tap on "New"
iv. Here you can either scan for your system or Click on Server
v. Here in server field type the IP address (that is IPv4 Address) or the system name
vi. Type in the Username and Password which you use to access your Windows PC
vii. Give a name under "Display as" for easy identification
viii. Tap on OK.
ix. Now you will see an laptop with globe icon. Tap on it and you will see all your files/folder of the system there.
Step 3.b. Windows XP PC:
i. Firstly you will need to enable Guest account by going to Control Panel – User Accounts – Guest Account – Click on "Turn on Guest account". This is because there is no other way I found to access the files in Windows XP in Android device with actual user name and password.
ii. Share the drives or folder you want to access [Refer the Reference Note 1 below to know how to share a folder]
iii. Open ES File Explorer in your device
iv. On top right corner tap on "Local" - select LAN
v. Tap on "New"
vi. Here you can either scan for your system or Click on Server
vii. Here in server field type the IP address (that is IPv4 Address) or the system name
viii. Type in the Username and Password which you use to access your Windows PC
ix. Give a name under "Display as" for easy identification
x. Tap on OK.
xi. Now you will see an laptop with globe icon. Tap on it and you will see all your shared files/folder of the system there.
Step 3.c. Windows Vista/7/8 PC:
i. Share the drives or folder you want to access [Refer the Reference Note 1 below to know how to share a folder]
ii. Open ES File Explorer in your device
iii. On top right corner tap on "Local" - select LAN
iv. Tap on "New"
v. Here you can either scan for your system or Click on Server
vi. Here in server field type the IP address (that is IPv4 Address) or the system name
vii. Type in the Username and Password which you use to access your Windows PC
viii. Give a name under "Display as" for easy identification
ix. Tap on OK.
x. Now you will see an laptop with globe icon. Tap on it and you will see all your shared files/folder of the system there.
Note: If you are using blank password for logging into windows then follow the steps below:
a. Run - gpedit.msc to access Group Policies
b. Navigate to Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options
c. Find -> Account: Limit local account use of blank passwords to console logon only
d. Double click on it and select "disable"
View attachment 1343985
Uploaded with ImageShack.us
4. Reference Note 1 - How to share folders:
On Windows XP:
a. Right click on the folder you want to share
b. Go to the sharing tab
c. Click the "If you understand the risk but still want to share the folder, click here"
d. Under "Network Sharing and Security" tick on "Share this folder on the network" and also on "Allow network users to change my files"
e. Click OK
View attachment 1343986
On Windows Vista/7/8:
a. Right click on the folder you want to share
b. Go to the sharing tab
c. Click on "Advanced Sharing"
d. In the next dialog box tick on "Share the folder"
e. Click on "Permissions" and tick on all the checkboxes under allow.
View attachment 1344010
5. Troubleshooting:
1 - The "Login Error"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You might get a login error at times. It happens highly when you use the computer name instead of the IP address and sometimes the error pops up even when using the IP address. You can try the below troubleshooting steps:
a. Delete the connection entry
b. Make a new entry and use the IP address this time
c. If the problem still persists, then try opening it 5-6 times repeatedly by ignoring the error.
d. If the problem still persist, then delete the connection, exit ES File Explorer completely and create a new connection again by using the IP address. This time it should work.
I feel this is a bug in the app. Hope it will be fixed in future.
Note - I was using ES File Explorer before FX File Explorer came to play store. Later after trying FX File Explorer, it had not given any error at all and hence its much more reliable. But for that you will have to pay as the app is out of beta.
2 - Wrong Username/Password even when entering the correct one
This usually happens if you put the system name instead of the IP address in the app. What you can do delete the entry and then close the app and reopen it and try a new connection with the IP address itself as this will solve the issue.
6. Useful tips:
1: You can increase the transfer speed by moving near to the router. The closer you are to the router the higher speed you gain.
2: You can even make shortcut of the folder in the network and place them on the home screen of the app. Do to that on ES File Explorer simply long press on the folder and choose "Add to server list".
7. Other Notes:
1: Please note that no internet connection is required to make this possible. Everything is done through the local network. Take out the idea from your mind that Wi-Fi is only for internet.
2: There are various other apps like KiesAir, AirDroid. But that will require you to be near the PC and access the files through a WebUI. But the guide which I have laid out here works from PC to device directly. You can sit at your living room, kitchen or bedroom or where you like within the Wi-Fi network and you are good to go.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Hope you find this guide useful. Please leave feedback and do post here for queries. Thanks!
Thank you Sun90, Bala_Gamer for heads up and others who responded for making this guide even better.
PS. Too bad that FX File Explorer network module is being made as a paid add-on. This was expected as the app is not of beta. Still it an awesome file explorer. Worth buying those add-ons.
Change log:
v0.1 [21-Sep-12]
-Initial guide
v0.2 [22-Sep-12]
-Changed app from FX File Explorer to ES File Explorer
-Made the guide even more detailed
-Added more screen shots
-Added troubleshooting
-A step closer to Noob-Proof guide
nice guide dude... keep them coming
edit:
windows 2000 ? epic
this will be a very usefull guide for sure ma8, especially for people with USB connectivity issues
Good work once again:good:
bala_gamer said:
nice guide dude... keep them coming
edit:
windows 2000 ? epic
Click to expand...
Click to collapse
I got my server in office at my place with Windows 2000 actually its so insecure that it does not even need proper authentication.
Sun90 said:
this will be a very usefull guide for sure ma8, especially for people with USB connectivity issues
Good work once again:good:
Click to expand...
Click to collapse
Yup. Or even lazy to sit by the PC for people like me
Nice guide harsha......But Windows 2000...ROFL
Made the guide a bit detailed and added screenshots. Hope this helps in making it noob proof.
Hello there,
i have an PC which is connected to plasma TV for movies. Also have Laptop.
I successful connected them to personal network since the Windows 7 sharing is a bit confusing than to XP.
I had to to add "Everyone" with permissions. Also had to add permission to the folders properties (Security tab).
So now i have access to the shared folder with read/write permissions, and it's working like a charm.
Than i tried this guide and can work it out. I've added static private/unreal IP and still have internet and network access to the shared folder.
But when try to add sever it returns error "Cannot find the server".
I've tried every possible way (with and without checked anonymous box also with/without domain, display as, ip/shared folder and so on) and nothing. Than i turn off windows firewall and still nothing.. any ideas?
soadfan said:
Hello there,
i have an PC which is connected to plasma TV for movies. Also have Laptop.
I successful connected them to personal network since the Windows 7 sharing is a bit confusing than to XP.
I had to to add "Everyone" with permissions. Also had to add permission to the folders properties (Security tab).
So now i have access to the shared folder with read/write permissions, and it's working like a charm.
Than i tried this guide and can work it out. I've added static private/unreal IP and still have internet and network access to the shared folder.
But when try to add sever it returns error "Cannot find the server".
I've tried every possible way (with and without checked anonymous box also with/without domain, display as, ip/shared folder and so on) and nothing. Than i turn off windows firewall and still nothing.. any ideas?
Click to expand...
Click to collapse
Hey. Kindly read the thread u linked below. Someone else might have already had an issue like yours and for a solution in that thread. Let me know if you still not able to get it work. http://forum.xda-developers.com/showthread.php?t=1896999
Sent from my GT-I9100 using Tapatalk 2
Harsha Raj said:
Hey. Kindly read the thread u linked below. Someone else might have already had an issue like yours and for a solution in that thread. Let me know if you still not able to get it work. http://forum.xda-developers.com/showthread.php?t=1896999
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Nope, no solution atm
Both PCs running 32 bit Windows 7 Ultimate
THIS is the router.
Phone is HTC Vision, running ICS Mimicry 1.5
EDIT: Upgraded router firmware to the latest version with no effect
EDIT2: Tried to set static ip for phone, different from PCs IPs > internet disappear. Rollback to DHCP and suddenly everything start working.
Thanks for this awesome tutorial, now I can enjoy my media library on my android without having to buy expensive router and "Stream" it through DLNA.
nice guide, i've used airdroid in the past, which is fairly easy - but this seems like a more secure way to transfer files.
Hi everyone!
I used ES File Explorer with my Xperia Z3 and Windows 10 desktop PC and all worked well. My PC failed so I purchased a new laptop and now I cannot get ES File Explorer to see the new laptop. I checked the server's IP address using Windows 10 settings > Network and Internet and can see the IPv4 address and also another quad number for IPv4 Servers and have tried both.
I also checked the username and I am very sure it is the email address that I use to log on to Windows 10. I also tried the Anonymous setting but nothing works. I get the screen stating login failed, WLAN is off, SMB server is out of network scope etc.
I think Kaspersky manages my firewall but I am not experienced enough to play with those settings. I will keep searching but any advice is much appreciated!
Edit :- I found the solution here.
https://techjourney.net/cannot-conn...-network-shares-shared-folders-in-windows-10/
Ofiaich
See the full post above...
This solution worked a few times on both my Xperia Z3 mobile and Xperia Z2 Tablet, but now doesn't!
emailed the developer of ES File Explorer and awaiting a response..
ofiaich
So this is admittedly a pretty vague issue. Until now i've been able to use the app DroidNas to transfer files with my Macbook. Randomly today, when I go to my device (Verizon HTC one) in Finder, it tells me "Connection Failed" almost immediately. They're both on the same wifi network, and as far as a I can tell I haven't changed any settings that would affect the network connectivity of my phone. I tried using a clean hosts file, in case maybe adaway was causing the problem, but no dice.
Anyone have any idea what the problem is / any troubleshooting ideas?
i'm having the same issue with a similar app called samba filesharing for android.
murtaza217 said:
So this is admittedly a pretty vague issue. Until now i've been able to use the app DroidNas to transfer files with my Macbook. Randomly today, when I go to my device (Verizon HTC one) in Finder, it tells me "Connection Failed" almost immediately. They're both on the same wifi network, and as far as a I can tell I haven't changed any settings that would affect the network connectivity of my phone. I tried using a clean hosts file, in case maybe adaway was causing the problem, but no dice.
Anyone have any idea what the problem is / any troubleshooting ideas?
Click to expand...
Click to collapse
you probably updated to mavericks here is what to do:
OS X Mavericks workaround:
Press Cmd+K in Finder and enter IP address AND share:
smb://IP_ADDRESSort/Share
for example:
smb://192.168.1.2:7777/SD Card
dft8 said:
you probably updated to mavericks here is what to do:
OS X Mavericks workaround:
Press Cmd+K in Finder and enter IP address AND share:
smb://IP_ADDRESSort/Share
for example:
smb://192.168.1.2:7777/SD Card
Click to expand...
Click to collapse
awesome! thanks for the workaround.
dft8 said:
you probably updated to mavericks here is what to do:
OS X Mavericks workaround:
Press Cmd+K in Finder and enter IP address AND share:
smb://IP_ADDRESSort/Share
for example:
smb://192.168.1.2:7777/SD Card
Click to expand...
Click to collapse
Thank you! I had even tried /Downloads and /Music to get to my Nexus 10 but only /SD Card gave me access to everything I needed.
dft8 said:
you probably updated to mavericks here is what to do:
OS X Mavericks workaround:
Press Cmd+K in Finder and enter IP address AND share:
smb://IP_ADDRESSort/Share
for example:
smb://192.168.1.2:7777/SD Card
Click to expand...
Click to collapse
Could you explain, why this happened. Why we need to do it ? Why the developer didn't address those problems ? Thank you in advance
Doesn't seem to work, it keeps saying connecting to server on my mac...
dft8 said:
you probably updated to mavericks here is what to do:
OS X Mavericks workaround:
Press Cmd+K in Finder and enter IP address AND share:
smb://IP_ADDRESSort/Share
for example:
smb://192.168.1.2:7777/SD Card
Click to expand...
Click to collapse
Am i supposed to type in the address they gave on the droid nas app or my internet ip address? Everytime i type in the droid nas adress it gives, it just keeps saying connecting to server the eventually says it failed because it either doesn't exist or anymore or something of that sort.
waqar.qu said:
Am i supposed to type in the address they gave on the droid nas app or my internet ip address? Everytime i type in the droid nas adress it gives, it just keeps saying connecting to server the eventually says it failed because it either doesn't exist or anymore or something of that sort.
Click to expand...
Click to collapse
You'll want to use the address it gives you and add the "/SD Card" or any other folders that you have shared. I also have only had success connecting as a guest, so you might want to delete anything out of your keychain with username/password for your android device. Hope this helps.
Droid Nas -43
I get an erreor -43 when I try to copy or create a new folder. Can some one help me resolve this issue. I am running maveriks on my imac seca 2008. I would like to purchase the product but it seems to need more work interms of a how too for us nubies.
Thanks,
M
external SD
dft8 said:
you probably updated to mavericks here is what to do:
OS X Mavericks workaround:
Press Cmd+K in Finder and enter IP address AND share:
smb://IP_ADDRESSort/Share
for example:
smb://192.168.1.2:7777/SD Card
Click to expand...
Click to collapse
Yeah sure it works, but what is the SMB for EXTERNAL SD ?
Aile said:
Yeah sure it works, but what is the SMB for EXTERNAL SD ?
Click to expand...
Click to collapse
You need to add the path of your ext SD on Droid NAS first. Tab and hold 'SD Card', you will get a new menu to add a new path. Choose a name and define the path of your ext SD. Now use the name you chose for smb.
Anyone got this working with Yosemite?? Im using a Xpera Z3, no root and a MacBook Pro with Yosemite and I cant get it to work.
Ive deleted all the standard shares besides SD CARD and made a new one with only the internal space. I need more OsX Yosemite help
I've just bought a T95Q and would like to be able to put BBC iPlayer downloads onto it but from a Laptop / PC over the network and believe it needs a \\sambadroid\usb\storage ........ type of address as opposed to being able to enter an IP address for say an FTP server.
I setup Sambadroid and was able to save it as a network location but if ever I tried to copy anything like a film to it from the laptop there was a write access error.
I googled and found various videos on how to change read / write access and used ES File Manager to drill down into System and Build Prop ... I also enabled execute as well as read and write and it bricked when I tried a download.
Someone suggested using Total commander and Paragon ... when I clicked on the drive in Total Commander I received a message saying .... contact my vendor as com.android.documentsui isn't installed .... but also with these tools I think I can only do it via FTP transfer which again isn't recognised.
I've seen a number of threads / videos saying enable write access to "Documents" which should appear in my list of apps but doesn't and I'm guessing is referring to above .... com.android.documentsui isn't installed .... and is where the problem is.
If anybody knows how I can do this to save the storage as a network location / mapped drive for easy access / file transfer from the laptop would be much appreciated .... or am I trying to achieve something that can't be done.