Database Info

Revert from OxygenOS to Cyannogen - problem with recovery

Hi,
Last month I've successfully switched my Oneplus One 16Gb to official Oxygen OS 2.1.4
Finaly I prefer the Cyanogen version and here I have a problem with the recovery tool.
I can't replace OxygenOS recovery at all and with it : not possible to install "super su" or cyanogen 12.1 rom.
With adb the installation of TWRP recovery or or cm12.1 recovery seems to work fine (transfer ok and no errors) but when I restart in recovery mode ((power + volume down) It's still OxygenOS Recovery in my phone.
Please help, I don't want to be stuck in this state :crying:

sylvainsjc said:
Hi,
Last month I've successfully switched my Oneplus One 16Gb to official Oxygen OS 2.1.4
Finaly I prefer the Cyanogen version and here I have a problem with the recovery tool.
I can't replace OxygenOS recovery at all and with it : not possible to install "super su" or cyanogen 12.1 rom.
With adb the installation of TWRP recovery or or cm12.1 recovery seems to work fine (transfer ok and no errors) but when I restart in recovery mode ((power + volume down) It's still OxygenOS Recovery in my phone.
Please help, I don't want to be stuck in this state :crying:
Click to expand...
Click to collapse
download the latest COS12.1.1 factory image to your pc, boot into fastboot mode and install the factory image via fastboot (flash aboot FIRST and do a "fastboot reboot bootloader" before you flash the rest ).
After that (or during, just replace recovery.img) you may install any custom recovery
Gesendet von meinem A0001 mit Tapatalk

Yes :good:
You brought me on the right track
I have successfully applied this method.
I nearly lost my phone because I had a power outage during the recovery but finally all is fine : I am back on COS 12.1.1 :victory:
A big thank-you

Revert from OxygenOS to Lineage - problem with recovery
Hi,
My phone OPO is currently running Oxygen Os
I am trying to switch to Lineage OS, however whenever the phone boots to the "Fast Boot" screen its just stuck at that.
Could someone please help me fix this?

[email protected] said:
Hi,
My phone OPO is currently running Oxygen Os
I am trying to switch to Lineage OS, however whenever the phone boots to the "Fast Boot" screen its just stuck at that.
Could someone please help me fix this?
Click to expand...
Click to collapse
Flash twrp with fastboot , then flash the lineage os :good:

Azhar_Fahry said:
Flash twrp with fastboot , then flash the lineage os :good:
Click to expand...
Click to collapse
Yes I am trying to flash TWRP
However, when I follow the below mentioned steps this is what i end up with :
List of devices attached
dc1c2a16 unauthorized
C:\Program Files (x86)\ClockworkMod\Universal Adb Driver>adb devices
List of devices attached
dc1c2a16 device
C:\Program Files (x86)\ClockworkMod\Universal Adb Driver>adb reboot bootloader
C:\Program Files (x86)\ClockworkMod\Universal Adb Driver>fastboot devices
C:\Program Files (x86)\ClockworkMod\Universal Adb Driver>fastboot oem unlock
< waiting for device >
And on the device screen it just reads "Fastboot mode"

So I kind of have the same problem but not exactly, I flashed the oxygen os and it worked perfectly but I wanted to change it to a nugget based rom and realized that I can not even boot into recovery. it gets stuck on the first oneplus logo that comes up and will not boot into the twrp. Any suggestions?

wait, so ur phone can't boot into the rom? or stuck at the fastboot mode everytime u try to turn on the phone ? I'm having that problem too, but I reinstall all the driver, and it worked.
Sent from my A0001 using Tapatalk

Azhar_Fahry said:
wait, so ur phone can't boot into the rom? or stuck at the fastboot mode everytime u try to turn on the phone ? I'm having that problem too, but I reinstall all the driver, and it worked.
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
My device is just stuck at the Fast boot screen that shows a One Plus Logo under which "Fastboot Mode" is written after I try to boot into fast boot.

[email protected] said:
My device is just stuck at the Fast boot screen that shows a One Plus Logo under which "Fastboot Mode" is written after I try to boot into fast boot.
Click to expand...
Click to collapse
try to reinstall all the driver from this link ( https://goo.gl/MxKLjH ) and follow the instruction , i use that method and it worked

arashsh2002 said:
So I kind of have the same problem but not exactly, I flashed the oxygen os and it worked perfectly but I wanted to change it to a nugget based rom and realized that I can not even boot into recovery. it gets stuck on the first oneplus logo that comes up and will not boot into the twrp. Any suggestions?
Click to expand...
Click to collapse
Go to fastboot and flash latest twrp first. If you are rooted, you can do that also from running systen (flashify, twrp manager)

giaur said:
Go to fastboot and flash latest twrp first. If you are rooted, you can do that also from running systen (flashify, twrp manager)
Click to expand...
Click to collapse
Thank you for your response. I tried doing that but it gives me an error saying that there is already a twrp installed. I used Twrp Manager

giaur said:
Go to fastboot and flash latest twrp first. If you are rooted, you can do that also from running systen (flashify, twrp manager)
Click to expand...
Click to collapse
so I am still having the same issue, I got the latest twrp on there and still stuck, cant boot into recovery. everything I find online is about oneplus 2 and nothing about oneplus 1, can I use the same instructions for my oneplus1?

arashsh2002 said:
so I am still having the same issue, I got the latest twrp on there and still stuck, cant boot into recovery. everything I find online is about oneplus 2 and nothing about oneplus 1, can I use the same instructions for my oneplus1?
Click to expand...
Click to collapse
Yes, this is general procedure for any android phone. The only requirement is unlocked bootloader.

giaur said:
Yes, this is general procedure for any android phone. The only requirement is unlocked bootloader.
Click to expand...
Click to collapse
it is unlocked

Stuck at logo/Bootloop with locked bootloader

My Redmi Note 6 Pro Global version just rebooted itself out of nowhere and now its showing MI logo and rebooting every 3-5 seconds. I didn't unlock bootloader and had MIUI 10 latest stable version installed. I can still enter fastboot mode. What can I do to fix this?

UPDATE
Over the last few days, these are the things that I've tried:
I can enter Fastboot mode and connect to my PC, but can't enter recovery mode.
I was able to unlock my bootloader (I was in the process of waiting for the 360 hours)
I tried flashing fastboot rom with MiFlash, but when MiFlash causes phone to reboot towards the end of flashing, the bootlooping problem occurs again and it cannot complete flashing.
I also tried flashing TWRP from fastboot, it says that it's successful, but when I try fastboot boot twrp.img, the same problem: MI logo and constant reboots.
I also tried to use fastboot oem edl mode and my phone is recognized as Qualcomm device, but MiFlash can't flash in this mode, saying that hello packet is not received.
At this point, I don't know what else to do and wondering if this is a hardware problem. Any ideas?

Did you tried to press VOL UP + POWER BUTTON after you flash TWRP? If flashing TWRP doesn't work Try to flash Official MIUI RECOVERY 3.0 That's all you can do. Otherwise you should give it to Mi customer service for faster solution.

I have the same problem, did you manage to solve this issue?

hello guys,
here is a solution, open your phone backpart and put your phone to edl mode by testpoint pinout,
then try to flash latest stable rom if fail then flash latest dev rom.

MI stuck at boot logo
m1s3rys1gn4l said:
hello guys,
here is a solution, open your phone backpart and put your phone to edl mode by testpoint pinout,
then try to flash latest stable rom if fail then flash latest dev rom.
Click to expand...
Click to collapse
Hello all ! same problem here !
i reinstall the last version in EDL mode every week !!
I can not handle it anymore !
sometime he match 1 day sometime 3 week ... everytime he stuck on menu and i can't reboot .
the only version i can use its 10.3.2 global ... all other version don't match !
Sorry for my english (i'm french) and thanx you for your help

hi my redmi note 6 pro is stuck on mi logo its not getting over it .
i dont have any pc or laptop at my home how can i solve this issue
during this lockdown ,and now its showing charging in shutdown mode?

Hello All i have the same problem stuck on MI logo
I have tried to wipe through Mi recovery but no use
I cant flash anything because the bootloader is locked
and i dont want to use EDL mode cuz i am stuck at home and dont have necessary tools for that
My question is can we flash anything using Fastboot command or can we ON usb debugging through fastboot be cause Mi flash wont work until USB debugging in On
Please help

Try another flash tool i.e. Qfil_flash_tool

Hi, I have even tried EDL mode to flash latest rom (android 9,miui11.0.4) using Mi flash tool,still facing the same issue.
It constantly reboots while on charging, and it doesn't turn on otherwise(2 Sec of that logo and then it fades away).
Please Help

any one find solution for this?

Hi, my problem is simpler, so is there any suggestion.
after last official update, due to the internal partition was encrypted, update wasn't finished and I am stuck on MI logo when restarted the phone.
bootloader is unlocked and I can enter to (orangefox) recovery, yet I am not sure what is the best way just to return phone to the bootable state? I presume some wiping is to be done, which is not the problem, just to have as short procedure as possible, preferably without need to re-flash clean ROM from recovery?
regards

mertcanekiz said:
I was able to unlock my bootloader (I was in the process of waiting for the 360 hours)
Click to expand...
Click to collapse
Hi, i'm in the same situation as you. How did you solve it? with the miunlock app I can't unlock it because it tells me that I have to select something on the phone first, but if the phone doesn't start I can't select anything ..

Try to remove hardware buttons from board and try

redmi 6 pro (bootloader locked)
same problem...
tried methods :
1) using mi flah tool ( error occurred : )
2) edl method (showing: device is locked)
........still stuck on miui logo .........

Redmi Note 7 pro no fastboot logo after flashing resurrection remix latest

Hi i am using redmi note 7 pro. i have recently flashed resurrection remix rom from xda thread.
when i boot into fastboot mode, it showing only black screen. and when i enter the command - fastboot devices, the result is - my device is showing in fastboot mode. But no fastboot logo in device.
Recovery is working and system boot successfully.
How I fix black fastboot screen ?
Note : my mobile is unlocked and rooted. previously i installed evolution x.

Just flash this In twrp, ofox or pbrp recovery it is stock splash screen
You can aslo get custom splash screen of many roms on telegram

MonuGurjar said:
Hi i am using redmi note 7 pro. i have recently flashed resurrection remix rom from xda thread.
when i boot into fastboot mode, it showing only black screen. and when i enter the command - fastboot devices, the result is - my device is showing in fastboot mode. But no fastboot logo in device.
Recovery is working and system boot successfully.
How I fix black fastboot screen ?
Note : my mobile is unlocked and rooted. previously i installed evolution x.
Click to expand...
Click to collapse
This problem is occurs due to latest china weekly firmware
Because after 20.5 splash screen removed from firmware so in future only try Indian stable firmware

Should I worry for this black fastbook screen or not.

MonuGurjar said:
Should I worry for this black fastbook screen or not.
Click to expand...
Click to collapse
Don't worry but if you want then flash upper splash zip in recovery

Thanks bro

Redmi 9A Cannot Install GSI

Hello,
I just wanna to ask you all that is it possible to install GSI on top MIUI 12 on Redmi 9A because every time I install GSI through fastboot,I always get boot loop.
I already erase data and flash Vbmeta
I also download a64 or binder64 GSI with a only because I know redmi 9a using 32 bit software but 64 bit capability
So whats the problem
May you guys give me an answer because I want to try something new like GSI because Redmi 9A is my first Project Treble phone
Thanks

GSI works on my phone
how do you get into FASTBOOTD mode ?

Mrinalsaha said:
GSI works on my phone
how do you get into FASTBOOTD mode ?
Click to expand...
Click to collapse
how can i get into FASTBOOTD ? i did the fastboot reboot fastboot but commands not working and phone not detected

mo3az2002 said:
how can i get into FASTBOOTD ? i did the fastboot reboot fastboot but commands not working and phone not detected
Click to expand...
Click to collapse
Code:
adb reboot fastboot

VD171 said:
Code:
adb reboot bootloader
Click to expand...
Click to collapse
it opened the FASTBOOT(the blue one), not FASTBOOTD(the yellow one)

used adb reboot fastboot , and it worked , THANKS A LOT DUDE <3

mo3az2002 said:
used adb reboot fastboot , and it worked , THANKS A LOT DUDE <3
Click to expand...
Click to collapse
please install the drivers first

NeonzGamingYT said:
please install the drivers first
Click to expand...
Click to collapse
???

Finally, we have a custom rom for REDMI 9A by @Sushrut1101
[ROM][11] crDroid Android [dandelion][18-Sep-2021][UNOFFICIAL]
*** Disclaimer I am not responsible for any damage you made to your device You have been warned crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features...
forum.xda-developers.com

in redmi device there is some restrictions to bootloader and fastboot cannot access some partitions in your device bcz of insuficient drivers.
here sol:
flash custum recovery in your device
-through custum recovery you can flash gsi
-if your version of redmi 9a is 12.0.25-12.5.9 you cannot open custum recovery but
-you can get full access of fastboot through recovery by using this commands you will enter into custum recovery that is"fastboot reboot fastboot","adb reboot fastboot".this commands works after flashing custum recovery.
-if you want use custum even if your data lost flash custum recovery and wipe data.
-you can esily enter into recovery
COMMANDS TO ENTER CUSTUM RECOVERY IN REDMI 9A
_________________________________________________________
POWER OFF YOUR PHONE AND PRESS POWER+VOLUME DOWN BUTTON
________________________or____________________________________________
ADB:"adb reboot bootloader".
FASTBOOT:"fastboot flash recovery <recovery.img path>
in pc goto place where your recovery image is and open terminal by right click.and paste "recovery image name in <.....>this dont use this symbols
ex:"fastboot flash recovery recovery.img",here recovery.img is name and terminal opened in downloads if your linux user above is exact but you are windows you had set path in environment variables.
FASTBOOT:"fastboot -w".--------wipes the partitions
(warns no one responsible)
FASTBOOT:"fastboot reboot recovery",--------------------------------you can enter into recovery even you are in redmi 9a 12.0.25-12.5.9.
NOTE: always extract your boot image from you mobile stable rom to fix boot loop by flashing boot image.
NOTE:use a memory card.
NOTE:dont try to make root bcz it causing boot loop in redmi 9a. if you want root ask me.
NOTE:FASTBOOT -W command clear every partion except system,recovery,boot.so try if you had only perfect rom.if you had any ask me i can help you bcz i bricked my redmi 9a nearly so many times.

tiru2003-02-12 said:
in redmi device there is some restrictions to bootloader and fastboot cannot access some partitions in your device bcz of insuficient drivers.
here sol:
flash custum recovery in your device
-through custum recovery you can flash gsi
-if your version of redmi 9a is 12.0.25-12.5.9 you cannot open custum recovery but
-you can get full access of fastboot through recovery by using this commands you will enter into custum recovery that is"fastboot reboot fastboot","adb reboot fastboot".this commands works after flashing custum recovery.
-if you want use custum even if your data lost flash custum recovery and wipe data.
-you can esily enter into recovery
COMMANDS TO ENTER CUSTUM RECOVERY IN REDMI 9A
_________________________________________________________
POWER OFF YOUR PHONE AND PRESS POWER+VOLUME DOWN BUTTON
________________________or____________________________________________
ADB:"adb reboot bootloader".
FASTBOOT:"fastboot flash recovery <recovery.img path>
in pc goto place where your recovery image is and open terminal by right click.and paste "recovery image name in <.....>this dont use this symbols
ex:fastboot flash recovery recovery.img",here recovery.img is name and terminal opened in downloads if your linux user above is exact but you are windows you had set path in environment variables.
FASTBOOT:"fastboot -w".--------wipes the partitions
(warns no one responsible)
FASTBOOT:"fastboot reboot recovery",--------------------------------you can enter into recovery even you are in redmi 9a 12.0.25-12.5.9.
NOTE: always extract your boot image for you mobile stable rom to fix boot loop by flashing boot image.
NOTE:dont try to make root bcz it causing boot loop in redmi 9a. if you want root ask me.
NOTE:FASTBOOT -W command clear every partion except system,recovery,boot.so try if youo had only perfect rom.if you had any ask me i can help you bcz i bricked my redmi 9a nearly so many times.
Click to expand...
Click to collapse
use orangefox bcz its official

any ?s rise your voice

Vivo y12s always reboots to fastboot

After I updated my phone rom it only boots to fastboot mode and before then it reboots always and hangs on vivo logo then again and again
Can someone please help!

Halogen_xii said:
After I updated my phone rom it only boots to fastboot mode and before then it reboots always and hangs on vivo logo then again and again
Can someone please help!
Click to expand...
Click to collapse
Try wiping or flash stock firmware again.

Suji2k said:
Try wiping or flash stock firmware again.
Click to expand...
Click to collapse
I've tried that already I even upgraded it to Android 11

Sometimes it might on boot up completely then few seconds after it reboots

Your phone's bootloader is misconfigured: it's the bootloader which tells the Android kernel what to boot into ( e.g. Fastboot, Recovery; Sideload, EDL, Normal ).
Try
Code:
fastboot devices
fastboot reboot
to have phone booting into Normal mode ( read: Android OS ).

Download Vivo y12s