Hello
I want android Q aosp but I can't found for J7 prime
Pls help me
crdroid there is
https://drive.google.com/drive/folders/1IE4KQEiOHGJW_StOidA5lWHeymn8NDLW
selo28 said:
crdroid there is
Click to expand...
Click to collapse
Thanks, but how install it? This rom use vendor
AM.Ohadi said:
Thanks, but how install it? This rom use vendor
Click to expand...
Click to collapse
1)Copy crDroid zip, gapps zip to your device
2) Boot into Recovery
3) Wipe cache, system, & data (or just cache & system for a dirty flash).
4) Flash ROM
5) Flash gapps
6) reboot
7 ) enjoy!
I see that the installation is easy, could someone send screenshots of this rom.
mistiko247 said:
I see that the installation is easy, could someone send screenshots of this rom.
Click to expand...
Click to collapse
https://crdroid.net
selo28 said:
1)Copy crDroid zip, gapps zip to your device
2) Boot into Recovery
3) Wipe cache, system, & data (or just cache & system for a dirty flash).
4) Flash ROM
5) Flash gapps
6) reboot
7 ) enjoy!
Click to expand...
Click to collapse
Thanks for your help but ask again,
J7 prime in Stock don't use vendor partition and this rom use vendor partition.
Need before flash, flash createvendor or createvendor 2 from spaget x project?
Because I got error 7 when I flashing rom
AM.Ohadi said:
Thanks for your help but ask again,
J7 prime in Stock don't use vendor partition and this rom use vendor partition.
Need before flash, flash createvendor or createvendor 2 from spaget x project?
Because I got error 7 when I flashing rom
Click to expand...
Click to collapse
Create vendor 1
pwazoski said:
Create vendor 1
Click to expand...
Click to collapse
why trun off screen got SOD and i can't trun on screen?
use H-VENDOR but my camera stuck and can't start
use Prish Vendor but android can't boot
if i say true @Astrako(thank you for your good rom) Please repair this problems
AM.Ohadi said:
why trun off screen got SOD and i can't trun on screen?
use H-VENDOR but my camera stuck and can't start
use Prish Vendor but android can't boot
if i say true @Astrako(thank you for your good rom) Please repair this problems
Click to expand...
Click to collapse
Why aosp one ui treble rom are much better performance aosp just good about the battery but its causing heating really fast so i guess the battery life is same mine used gsi before and get to one ui again
pwazoski said:
Why aosp one ui treble rom are much better performance aosp just good about the battery but its causing heating really fast so i guess the battery life is same mine used gsi before and get to one ui again
Click to expand...
Click to collapse
OneUI port roms are incomplete and got a lot of system, ram and have a lot of bug and nothing works in system and i think battery performance in Havoc Os now i using its great battery life and now usage ram is lower than 800 mb
Many apps i can install in aosp like samsung app
But in OneUI i can not install it.
I used note20 ultra port and all of OneUI roms ported. I like radical quak rom but in arm64 have lot of bugs. Now because i installed this roms my battery is broke and always my phine charging.
Sorry for my bad english.
AM.Ohadi said:
OneUI port roms are incomplete and got a lot of system, ram and have a lot of bug and nothing works in system and i think battery performance in Havoc Os now i using its great battery life and now usage ram is lower than 800 mb
Many apps i can install in aosp like samsung app
But in OneUI i can not install it.
I used note20 ultra port and all of OneUI roms ported. I like radical quak rom but in arm64 have lot of bugs. Now because i installed this roms my battery is broke and always my phine charging.
Sorry for my bad english.
Click to expand...
Click to collapse
Nope i prefer arm32 on this phone arm64 make it more slowly and lag 7870 is old right now arm32 have better build and got less bug than arm64
pwazoski said:
Nope i prefer arm32 on this phone arm64 make it more slowly and lag 7870 is old right now arm32 have better build and got less bug than arm64
Click to expand...
Click to collapse
sorry but i say i want aosp because iwant use arm 64
selo28 said:
crdroid there is
https://drive.google.com/drive/folders/1IE4KQEiOHGJW_StOidA5lWHeymn8NDLW
Click to expand...
Click to collapse
Link doesn't working :c
it will be good if any developer get to make aosp for g610x and maintain it till be highly stable as we see many people hate one ui
Now i working on it but need help i can't make vendor support my rom
And can not made a aosp installer zip
AM.Ohadi said:
Now i working on it but need help i can't make vendor support my rom
And can not made a aosp installer zip
Click to expand...
Click to collapse
you can ask any one of the active developers here
thank you man for trying to make this rom available for us
pwazoski said:
Nope i prefer arm32 on this phone arm64 make it more slowly and lag 7870 is old right now arm32 have better build and got less bug than arm64
Click to expand...
Click to collapse
arm32 will be unusable at 2021-09 due to google's policy. no apps will run then. save money for A new phone
yahiaashraf111 said:
it will be good if any developer get to make aosp for g610x and maintain it till be highly stable as we see many people hate one ui
Click to expand...
Click to collapse
https://t.me/s/erfangsi
This pixel gsi (generic one is too big so not flashable)android 11 is highly unstable,random reboots. Hope some devs can modify and fix it.
also h vendor should be needed for this
Thank for all helps
I using H-Vendor Resources for found good vendor with my rom
I working on Havoc os because have a lot of things for customizing
Related
Android Open Kang Project
AOKP stands for Android Open Kang Project. It is a custom ROM distribution for several high-end Android devices. The name is a play on the word kang and AOSP (Android Open Source Project). The name was sort of a joke, but it just stuck, just like our infatuation with unicorns.
We fork the source code of Android that Google puts out in the open with every major version release, and we then add the magical unicorn bytes (read: we add some of the coolest features that are both useful and make your ROM awesome.
Downloads
Rom
Gapps
Instructions
Factory Reset/Wipe Data
Format System
Format Cache
Format Dalvik Cache
Install ROM
Install Gapps
Reboot
BugsAccelerometer
XDA: DevDB Information:
AOKP for Oppo F1 (f1f,f1w), ROM for the Oppo F1
Contributors: @highwaystar_ru , @mikeioannina
ROM OS VERSION: 7.x
ROM KERNEL:Linux 3.1.x
Rom Firmware Required:PS Unlocked BL , TWRP
Based On : AOKP
Version Information
Status: Beta
Created: 2018-07-03
Last Updated : 2018-07-03
reserved
khannz7 said:
Android Open Kang Project
AOKP stands for Android Open Kang Project. It is a custom ROM distribution for several high-end Android devices. The name is a play on the word kang and AOSP (Android Open Source Project). The name was sort of a joke, but it just stuck, just like our infatuation with unicorns.
We fork the source code of Android that Google puts out in the open with every major version release, and we then add the magical unicorn bytes (read: we add some of the coolest features that are both useful and make your ROM awesome.
Downloads
Rom
Gapps
Instructions
Factory Reset/Wipe Data
Format System
Format Cache
Format Dalvik Cache
Install ROM
Install Gapps
Reboot
Bugs Accelerometer
XDA: DevDB Information:
AOKP for Oppo F1 (f1f,f1w), ROM for the Oppo F1
Contributors:@highwaystar_ru , @mikeioannina
ROM OS VERSION: 7.x
ROM KERNEL:Linux 3.1.x
Rom Firmware Required:PS Unlocked BL , TWRP
Based On : AOKP
Version Information
Status: Beta
Created: 2018-07-02
Last Updated : 2018-07-02
Click to expand...
Click to collapse
If you send me 5he sound patches I'll send you a dirty accelerometer patch.
MiniBlu said:
If you send me 5he sound patches I'll send you a dirty accelerometer patch.
Click to expand...
Click to collapse
Those are already on Gerrit
Here you go
https://review.lineageos.org/#/q/owner:highwaystar.ru%40gmail.com+status:open
Patch please?
No music player application
Battery calibration fixed?
Then will install
OK installed it
Same bug as highway
Battery calibrates after one charge cycle and accelerometer missing
Can u also mention that spectrum is required to install this or won't start
Phucan2017 said:
No music player application
Click to expand...
Click to collapse
No such issue !! Comes preinstalled
Ghostv33 said:
OK installed it
Same bug as highway
Battery calibrates after one charge cycle and accelerometer missing
Can u also mention that spectrum is required to install this or won't start
Click to expand...
Click to collapse
I wonder if you have read the OP
Please Fix battery drain from 100 down to 60
Thanks for the AOKP, but I've got a issue here, is there a way to port stock oppo camera? Or at least an alternative of stock? My girlfriends nagging me non-stop. You know how girls are like :crying::silly:
ezrawk said:
Thanks for the AOKP, but I've got a issue here, is there a way to port stock oppo camera? Or at least an alternative of stock? My girlfriends nagging me non-stop. You know how girls are like :crying::silly:
Click to expand...
Click to collapse
Try the google pixel camera
lol
thisbearisdrunk said:
Try the google pixel camera
lol
Click to expand...
Click to collapse
Tried GC, tried Nokia Cam, tried ColorOS Camera Port, non of'em satisfied her :silly: :crying:
I
ezrawk said:
Tried GC, tried Nokia Cam, tried ColorOS Camera Port, non of'em satisfied her :silly: :crying:
Click to expand...
Click to collapse
If I get to find the stock oppo camera I will let u know
thisbearisdrunk said:
I
If I get to find the stock oppo camera I will let u know
Click to expand...
Click to collapse
Yes please! Do let me know ASAP if you find one. I've even tried to extract the Oppo Stock Cam from project spectrum. Tried installing it in AOKP but it says that it can't be installed because it's overlapping with another packet (which I couldn't figure out what app is interfering with it). Thank you! :highfive:
ezrawk said:
Yes please! Do let me know ASAP if you find one. I've even tried to extract the Oppo Stock Cam from project spectrum. Tried installing it in AOKP but it says that it can't be installed because it's overlapping with another packet (which I couldn't figure out what app is interfering with it). Thank you! :highfive:
Click to expand...
Click to collapse
Hey I found the solution I tried to install the camera from spectrum on a diff phone and installed all the plugins it worked
thisbearisdrunk said:
Hey I found the solution I tried to install the camera from spectrum on a diff phone and installed all the plugins it worked
Click to expand...
Click to collapse
Yeah but on AOKP it doesn't, which is weird. I tried uninstalling Snap LOS Camera, still it didn't work. I wonder what went wrong.
Hello guys,
I'm new to oppo f1 community. I was just checking around every aosp based rom thread but i am confused. Can i know that which is the stablest of them all? (irrespective to it's android version and except the stock rom) .
Please reply ASAP.
I just wanted to advise that I have installed and used every ROM in the Honor View 10 forum.
https://forum.xda-developers.com/honor-view-10/development
Need:
- Honor View 10 ROM
- gapps (https://opengapps.org/)
- Your current p20 pro kernel (backup with twrp)
- Magisk 17.1 zip
- Huawei_P20Pro_B131_Camera.zip (https://androidfilehost.com/?fid=11050483647474833532)
- HwCamera2_addon.zip (https://drive.google.com/open?id=1ktNZWP8O0Oqnm6Zb5c_mFpwKyHvkdCTK)
Note: Pixel ROM doesn't need gapps, and after installing one of these ROMs on first boot it maybe reboot on its own once or twice, it's normal. I'm gonna try and export the IR blaster apk from the stock image, might work. maybe....
Doesn't work:
- NFC
- RAW picture format
- Headphones by type-c
- Dual speakers
- VoLTE (Not yet tested)
They have lots of great customization options, note when I installed Android 9 ROMs it breaks twrp, not sure why but erecovery brings me back every time.
Vedrick said:
I just wanted to advise that I have installed and used every ROM in the Honor View 10 forum.
Need:
- Honor View 10 ROM
- gapps
- Your current p20 pro kernel (backup with twrp)
- Magisk 17.1 zip
- Huawei_P20Pro_B131_Camera.zip
- HwCamera2_addon.zip
Doesn't work:
- NFC
- RAW picture format
They have lots of great customization options, note when I installed Android 9 ROMs it breaks twrp, not sure why but erecovery brings me back every time.
Click to expand...
Click to collapse
Why do you need the Kernel? Is it for recovery purposes if something goes wrong?
Vedrick said:
I just wanted to advise that I have installed and used every ROM in the Honor View 10 forum.
Need:
- Honor View 10 ROM
- gapps
- Your current p20 pro kernel (backup with twrp)
- Magisk 17.1 zip
- Huawei_P20Pro_B131_Camera.zip
- HwCamera2_addon.zip
Doesn't work:
- NFC
- RAW picture format
They have lots of great customization options, note when I installed Android 9 ROMs it breaks twrp, not sure why but erecovery brings me back every time.
Click to expand...
Click to collapse
Thanks man! I have now installed the PixelExperience ROM, works great.
kikireki said:
Why do you need the Kernel? Is it for recovery purposes if something goes wrong?
Click to expand...
Click to collapse
I'm not sure why, it maybe device specific as I have the L04 model. If I don't use the kernel it bootloops.
PKnaepel said:
Thanks man! I have now installed the PixelExperience ROM, works great.
Click to expand...
Click to collapse
No problem.
PKnaepel said:
Thanks man! I have now installed the PixelExperience ROM, works great.
Click to expand...
Click to collapse
What Gapps did you use?
kikireki said:
What Gapps did you use?
Click to expand...
Click to collapse
GAPPS are in included.
What about IR blaster, headphones by type c and dual speakers?
casley79 said:
What about IR blaster, headphones by type c and dual speakers?
Click to expand...
Click to collapse
Thanks for the question, I did forget to add those, those do not work. List updated above.
VoLTE ?
mrabcx said:
VoLTE ?
Click to expand...
Click to collapse
Untested.
any download
dzupert said:
any download
Click to expand...
Click to collapse
Nope, feel free to explore the available ROM's using the link below:
https://forum.xda-developers.com/honor-view-10/development
PKnaepel said:
GAPPS are in included.
Click to expand...
Click to collapse
Do you have problems with the battery on PixelExperience? Mine it goes down pretty fast and the device heats a little bit.
kikireki said:
Do you have problems with the battery on PixelExperience? Mine it goes down pretty fast and the device heats a little bit.
Click to expand...
Click to collapse
Yes, the battery ran out relatively quickly. I removed the NFC app and since then the battery life is better. Tomorrow I test the screen on time.
I hate EMUI and try to find the best ROM with Android 9. PixelExperience seems the best choice to me.
I'm partial to the Aicp Oreo Edition - beautiful dark interface and tons of customization.
Vedrick said:
I'm partial to the Aicp Oreo Edition - beautiful dark interface and tons of customization.
Click to expand...
Click to collapse
Link please
casley79 said:
Link please
Click to expand...
Click to collapse
I think he means this ROM: https://forum.xda-developers.com/honor-view-10/development/preview-aicp-13-1-t3783519
PKnaepel said:
I think he means this ROM: https://forum.xda-developers.com/honor-view-10/development/preview-aicp-13-1-t3783519
Click to expand...
Click to collapse
yup, them's the one.
VENDOR FOR GSI (Generic System Image)
I'm not responsible for whatever damage this could possibly cause to your device.
Before Starting Make Sure You Treble Your Bevice By This Guide here If you appreciate the work i have done, Feel free to buy me a cup of coffee @paypal
Just to Make it clear, Treble Vendor for A8/A8+ is been ported from A7 2018 Oreo. We have tested many Oreo GSI from phhuson generic list and they are booted with this vendor. We have also tested Pie GSI, most of them didn't booted but few did(Phh-AOSP-9.0).
What is GSI?
A Generic System Image (GSI) is a system image. It is considered a "pure Android" implementation with Android Open Source Project (AOSP) code that any Treble device can run successfully. For more info visit here : https://source.android.com/setup/build/gsi
What is working?
Wi-Fi & Hotspot
Telephony & Ril (Mobile Data, Calls, SMS, MMS)
NFC
Camera
Bluetooth
GPS
Fingerprint
All Sensors
2D/3D Graphics + Vulkan
What is not working?
VoLTE
**Important: Vendor attached to this thread is stable, If you find any bugs on GSI, report it to their respective maintainer's with logs.
Instructions
1- Make Sure u Treble your device
2- Wipe System, Vendor, Data, Cache
3- Flash Vendor-Installer.zip (includes Kernel)
4- Flash GSI as system_image on TWRP
5- Reboot and start using your device
Downloads. Changelogs below
Credits
IF you helped in this rom and i forgot you, tell me in a PM or in a reply
@corsicanu for repartition help
@lzzy12 , @TaifAljaloo , @Griffin98 , @somadsul , @ananjaser1211 for lot of contributions and helping to fix bugs
@enesuzun2002 , @neondragon1909 for helping to fix FP and NFC
@587.saboor for testing
XDA:DevDB Information
Project Treble, Vendor for Samsung Galaxy A8 / A8+ 2018
Kernel Source
Contributors
prashantp01
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Current Stable Version: v1.0
Created 2019-02-12
Last Updated 2019-02-12
Download
Vendor-Installer For Android 8.1 / 9.0 GSIs (includes Kernel)
You can download an A only ARM64 GSI from here
OpenGapps
Fix for bugs
Camera Fix
Fingerprint Fix
Changelog
V1.0
-initial release
reserved 2
Massive thanks to all of you guys!
I have just installed it on my device and it works wonderfully. I used the AOSP extended and everything's great so far. Thanks a lot for giving us this opportunity, I've been looking for a stock experience on my A8+ plus for a while now
wayers said:
I have just installed it on my device and it works wonderfully. I used the AOSP extended and everything's great so far. Thanks a lot for giving us this opportunity, I've been looking for a stock experience on my A8+ plus for a while now
Click to expand...
Click to collapse
More is yet to come:highfive: untill i have this device
prashantp01 said:
More is yet to come:highfive: untill i have this device
Click to expand...
Click to collapse
I'm trying to install asop extended from.
I flashed vendors then flashed rom image and show no system installed.
What partition is a ? I through it was system?
I'm new at flashing this .
What I'm I doing wrong?
I have flashed your project treble-rom it works good.
mchlbenner said:
I'm trying to install asop extended from.
I flashed vendors then flashed rom image and show no system installed.
What partition is a ? I through it was system?
I'm new at flashing this .
What I'm I doing wrong?
I have flashed your project treble-rom it works good.
Click to expand...
Click to collapse
If it shows no OS installed.... Just reboot it.. It will boot gsi
prashantp01 said:
If it shows no OS installed.... Just reboot it.. It will boot gsi
Click to expand...
Click to collapse
What do I whipe before install?
Do flash image to system?
mchlbenner said:
Do flash image to system?
Click to expand...
Click to collapse
Yes do flash your gsi to system image and reboot
prashantp01 said:
Yes do flash your gsi to system image and reboot
Click to expand...
Click to collapse
Last question do do do a full whipe data system ECT?
Thanks I got it!!
Dolby works on asop extended rom
No GSI image is working good. Camera is still unstable in Re-commanded GSI images and others. No GSI image is connecting with PC . i have tried every GSI image Mentioned in this post and Other famous Ones as well. In most of them Finger print is also not working. i tried every image for just 10 mints and i fingered out these things may be many more.
ajnajao1 said:
No GSI image is working good. Camera is still unstable in Re-commanded GSI images and others. No GSI image is connecting with PC . i have tried every GSI image Mentioned in this post and Other famous Ones as well. In most of them Finger print is also not working. i tried every image for just 10 mints and i fingered out these things may be many more.
Click to expand...
Click to collapse
I have had them all connect to PC undo USB debugging and select transfer files and the camera works fine.
Finger print only works on Galaxy project rom.
Picture included.
I'm on asop extended rom .
wayers said:
I have just installed it on my device and it works wonderfully. I used the AOSP extended and everything's great so far. Thanks a lot for giving us this opportunity, I've been looking for a stock experience on my A8+ plus for a while now
Click to expand...
Click to collapse
Can you tell us what's broke and what's not in the GSI ?
Also how is the experience @mchlbenner ?
SRIHARI_GUY said:
Can you tell us what's broke and what's not in the GSI ?
Also how is the experience @mchlbenner ?
Click to expand...
Click to collapse
The Galaxy project rom all works.
I'm on aosp extended rom and it has two bugs only.
No volte
No finger print.
Dolly works
The rom is a 9/10.
This rom works really good.
mchlbenner said:
The Galaxy project rom all works.
I'm on aosp extended rom and it has two bugs only.
No volte
No finger print.
Dolly works
The rom is a 9/10.
This rom works really good.
Click to expand...
Click to collapse
I can live without VoLTE but someone has to fix the fingerprint issue. Can anyone who tried fixing it open a issue in AOSP Extended's GitHub or any for that matter. I know it's asking for too much . If there's a dirty fix, I am cool with that as well
---------- Post added at 03:53 AM ---------- Previous post was at 02:57 AM ----------
@prashantp01 Does the fingerprint sensor work in Phh-Treble? I am considering to try both Phh-Treble and AOSP Extended. Afaik the GitHub says Fingerprint works just fine and you made a dirty fix for Phh-Treble Camera issue as well. So what can I look forward?
ajnajao1 said:
No GSI image is working good. Camera is still unstable in Re-commanded GSI images and others. No GSI image is connecting with PC . i have tried every GSI image Mentioned in this post and Other famous Ones as well. In most of them Finger print is also not working. i tried every image for just 10 mints and i fingered out these things may be many more.
Click to expand...
Click to collapse
SRIHARI_GUY said:
Can you tell us what's broke and what's not in the GSI ?
Also how is the experience @mchlbenner ?
Click to expand...
Click to collapse
SRIHARI_GUY said:
I can live without VoLTE but someone has to fix the fingerprint issue. Can anyone who tried fixing it open a issue in AOSP Extended's GitHub or any for that matter. I know it's asking for too much . If there's a dirty fix, I am cool with that as well
---------- Post added at 03:53 AM ---------- Previous post was at 02:57 AM ----------
@prashantp01 Does the fingerprint sensor work in Phh-Treble? I am considering to try both Phh-Treble and AOSP Extended. Afaik the GitHub says Fingerprint works just fine and you made a dirty fix for Phh-Treble Camera issue as well. So what can I look forward?
Click to expand...
Click to collapse
1)Camera is fixed for all gsi....just check post #2
2)phone which cant detect by pc.. are because of magisk....magisk breaks the mtp
3)fingerprint is working...only AOSP by phh have latest implementation....other gsi maintainers didn't updated those phh patches, so most likely u will face FP bug on their gsi. Fingerprint from VENDOR is stable
4)VoLTE well idc about it, on AOSP volte is impossible for exynos
SRIHARI_GUY said:
I can live without VoLTE but someone has to fix the fingerprint issue. Can anyone who tried fixing it open a issue in AOSP Extended's GitHub or any for that matter. I know it's asking for too much . If there's a dirty fix, I am cool with that as well
---------- Post added at 03:53 AM ---------- Previous post was at 02:57 AM ----------
@prashantp01 Does the fingerprint sensor work in Phh-Treble? I am considering to try both Phh-Treble and AOSP Extended. Afaik the GitHub says Fingerprint works just fine and you made a dirty fix for Phh-Treble Camera issue as well. So what can I look forward?
Click to expand...
Click to collapse
One thing on aosp extended only 6.0 they boot fine 6.1 and up will not boot.
I've been building this ROM since 1.5 month ago, it's a fine ROM and I thought I might as well share it here. It's unofficial, I'm not a part of the Bliss team.
kernel used: https://github.com/UtsavisGreat/kernel_xiaomi_raphael
Tested and running fine on my own Mi 9T Pro Global (decrypted) with global 11.0.4 firmware. I had previosuly flashed the chinese 11.0.2 and it ran fine, too.
Installation:
1. Wipe cache and data
2. Flash ROM (I also flash dm-verity at this point because i'm decrypted, you can find it here: https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389)
3. Reboot to system...reboot to twrp.
4. Flash opengapps & magisk. (opengapps still in beta - here: https://sourceforge.net/projects/opengapps/files/arm64/beta/)
5. Reboot to system again.
ROM sources on github: https://github.com/BlissRoms
ROM download: https://androidfilehost.com/?fid=4349826312261798304
(https://androidfilehost.com/?w=files&flid=301904)
Some screenshots:
Cool glad to see this up, i remember i tried first and second builds and they worked well. Will definitely give it a shot:good:
Mooatreides said:
Cool glad to see this up, i remember i tried first and second builds and they worked well. Will definitely give it a shot:good:
Click to expand...
Click to collapse
you won't regret, the Bliss team did a great job with their sources
How does FOD on AOD works?
quake73 said:
you won't regret, the Bliss team did a great job with their sources
Click to expand...
Click to collapse
Thank you for the ROM.
Is there any bugs? Is it stable enough for daily driver?
akkh99 said:
Thank you for the ROM.
Is there any bugs? Is it stable enough for daily driver?
Click to expand...
Click to collapse
I myself use it for more than a motnh...heavy gaming, alarm wakes me up every morning, i take pics with the camera etc.
Do you have a link for dm-verity? Im on miui 11.0.3 dont want to wipe all my data.
jasondutch said:
Do you have a link for dm-verity? Im on miui 11.0.3 dont want to wipe all my data.
Click to expand...
Click to collapse
https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389
Does bluetooth audio works? Which gapps package should I flash in order to get google dialer?
@jackeagle
signature spoofing for microG is supported ?
Great to see another rom will try it, Thanks Dev!
Edit: the rom is very good but when i enabled the aod and when i lock the screen to see aod the screen flickers then it shows aod, also how do i make the animation speed normal like circles i want normal speed i already checked the settings but i don't know which would make it like normal speed, otherwise the rom is good i will test the battery too, Thanks.
SyCreed said:
@quake73 gr8 to see you here.
Do you plan to keep building it?
I remember you from op6 topics, there was like 8 roms built by you that was abandoned after 2-3 updates...
Click to expand...
Click to collapse
I sure don't plan to open 8 rom threads here as for the op6 .
As for the updates of bliss - yes, I plan to keep building and sharing it until an official one appears (or someone else opens another bliss thread).
I'm a fan of caf roms, I'm also building a few of those but they proved to be tough beasts for this device.
The battery is very friendly played CODM with max graphics and Max 60 fps no framedrops at all very smooth the battery is perfect also fp is very responsive and fast , the only issue i faced i already commented above it was about aod, Thanks for this awesome ROM!
SyCreed said:
Hey, can you tell if there is an option to double tap for pulse notifications? Didn't see it in screenshots
Click to expand...
Click to collapse
No, i Couldn't see it anywhere
<deleted>
I am really tempted by this rom. Is it good? I'm currently on evox
Thank you so much for your hard work and this nice ROM :good: will test it for a while...can say the fod is amazing fast...thank you very much and keep IP the good work
What trees have you based off?
Everything work fine
It's a good rom
Thanks to dev
Which rom will be better for a regular poco x3 pro user ?
MIUI
no discussion
bínsháms said:
Which rom will be better for a regular poco x3 pro user ?
Click to expand...
Click to collapse
At the moment i using AncientOS. No issues found.
LineageOS has least bugs as compared to other custom roms (it performs best with default stuff no need to change anything like kernel etc). My stats are
LineageOS 19.1
KangarooX Kernel r18
Gpu Driver [email protected] (TWRP variant)
i like crdroid rom the battery and performance are great with built in miui cam
alonsoj636 said:
MIUI
no discussion
Click to expand...
Click to collapse
I think there are 2 great ROMs available.
ArrowOS => Stability, Performance and Battery Life are unequaled
CrDroid => Most of customisations, MIUI CAM included and very good performance, stability and battery life
Both are usable for regular users
Pixel experience all day everyday!
SmartJuwel said:
I think there are 2 great ROMs available.
ArrowOS => Stability, Performance and Battery Life are unequaled
CrDroid => Most of customisations, MIUI CAM included and very good performance, stability and battery life
Both are usable for regular users
Click to expand...
Click to collapse
Thanks a lot
Usama-CW said:
LineageOS has least bugs as compared to other custom roms (it performs best with default stuff no need to change anything like kernel etc). My stats are
LineageOS 19.1
KangarooX Kernel r18
Gpu Driver [email protected] (TWRP variant)
Click to expand...
Click to collapse
How do you flash the GPU driver? Ik I need to go to addons and select the one I want, but then on TWRP would it work if I adb sideload it, or there's a different way. I'm currently using the magisk module for the driver
palopaxo said:
How do you flash the GPU driver? Ik I need to go to addons and select the one I want, but then on TWRP would it work if I adb sideload it, or there's a different way. I'm currently using the magisk module for the driver
Click to expand...
Click to collapse
in order to use TWRP variant, your rom must support SystemR/W (read write) ... if your rom have that support follow the steps
1 :- Download your desired driver from here
adreno driver for sm8xxx/sm7xxx/sm6xxx
adreno driver magisk module for sm8150 or sm8xxx/sm7xxx/sm6xxx family running on R or newertested on sm8150 and sm8250WARNING : [email protected] has known crash issues when used with magiskWARNING: BLOBS HAS...
dl.lybxlpsv.com
2 :- go to TWRP > Advanced > Terminal
3 :- write "mount /vendor"
4 :- Go back and flash your driver in TWRP
5 :- Use "Device Info HW" app to check if your driver is successfully updated or not
Note : You can check for yourself in TWRP terminal by using "mount /vendor" command if it shows nothing then it's (vendor) mounted otherwise it will show error (means you need to make your rom SystemR/W-able)
Usama-CW said:
in order to use TWRP variant, your rom must support SystemR/W (read write) ... if your rom have that support follow the steps
...
Click to expand...
Click to collapse
ok thanks, that was easier than I thought