VENDOR FOR GSI (Generic System Image)
I'm not responsible for whatever damage this could possibly cause to your device.
Before Starting Make Sure You Treble Your Bevice By This Guide here If you appreciate the work i have done, Feel free to buy me a cup of coffee @paypal
Just to Make it clear, Treble Vendor for A8/A8+ is been ported from A7 2018 Oreo. We have tested many Oreo GSI from phhuson generic list and they are booted with this vendor. We have also tested Pie GSI, most of them didn't booted but few did(Phh-AOSP-9.0).
What is GSI?
A Generic System Image (GSI) is a system image. It is considered a "pure Android" implementation with Android Open Source Project (AOSP) code that any Treble device can run successfully. For more info visit here : https://source.android.com/setup/build/gsi
What is working?
Wi-Fi & Hotspot
Telephony & Ril (Mobile Data, Calls, SMS, MMS)
NFC
Camera
Bluetooth
GPS
Fingerprint
All Sensors
2D/3D Graphics + Vulkan
What is not working?
VoLTE
**Important: Vendor attached to this thread is stable, If you find any bugs on GSI, report it to their respective maintainer's with logs.
Instructions
1- Make Sure u Treble your device
2- Wipe System, Vendor, Data, Cache
3- Flash Vendor-Installer.zip (includes Kernel)
4- Flash GSI as system_image on TWRP
5- Reboot and start using your device
Downloads. Changelogs below
Credits
IF you helped in this rom and i forgot you, tell me in a PM or in a reply
@corsicanu for repartition help
@lzzy12 , @TaifAljaloo , @Griffin98 , @somadsul , @ananjaser1211 for lot of contributions and helping to fix bugs
@enesuzun2002 , @neondragon1909 for helping to fix FP and NFC
@587.saboor for testing
XDA:DevDB Information
Project Treble, Vendor for Samsung Galaxy A8 / A8+ 2018
Kernel Source
Contributors
prashantp01
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Current Stable Version: v1.0
Created 2019-02-12
Last Updated 2019-02-12
Download
Vendor-Installer For Android 8.1 / 9.0 GSIs (includes Kernel)
You can download an A only ARM64 GSI from here
OpenGapps
Fix for bugs
Camera Fix
Fingerprint Fix
Changelog
V1.0
-initial release
reserved 2
Massive thanks to all of you guys!
I have just installed it on my device and it works wonderfully. I used the AOSP extended and everything's great so far. Thanks a lot for giving us this opportunity, I've been looking for a stock experience on my A8+ plus for a while now
wayers said:
I have just installed it on my device and it works wonderfully. I used the AOSP extended and everything's great so far. Thanks a lot for giving us this opportunity, I've been looking for a stock experience on my A8+ plus for a while now
Click to expand...
Click to collapse
More is yet to come:highfive: untill i have this device
prashantp01 said:
More is yet to come:highfive: untill i have this device
Click to expand...
Click to collapse
I'm trying to install asop extended from.
I flashed vendors then flashed rom image and show no system installed.
What partition is a ? I through it was system?
I'm new at flashing this .
What I'm I doing wrong?
I have flashed your project treble-rom it works good.
mchlbenner said:
I'm trying to install asop extended from.
I flashed vendors then flashed rom image and show no system installed.
What partition is a ? I through it was system?
I'm new at flashing this .
What I'm I doing wrong?
I have flashed your project treble-rom it works good.
Click to expand...
Click to collapse
If it shows no OS installed.... Just reboot it.. It will boot gsi
prashantp01 said:
If it shows no OS installed.... Just reboot it.. It will boot gsi
Click to expand...
Click to collapse
What do I whipe before install?
Do flash image to system?
mchlbenner said:
Do flash image to system?
Click to expand...
Click to collapse
Yes do flash your gsi to system image and reboot
prashantp01 said:
Yes do flash your gsi to system image and reboot
Click to expand...
Click to collapse
Last question do do do a full whipe data system ECT?
Thanks I got it!!
Dolby works on asop extended rom
No GSI image is working good. Camera is still unstable in Re-commanded GSI images and others. No GSI image is connecting with PC . i have tried every GSI image Mentioned in this post and Other famous Ones as well. In most of them Finger print is also not working. i tried every image for just 10 mints and i fingered out these things may be many more.
ajnajao1 said:
No GSI image is working good. Camera is still unstable in Re-commanded GSI images and others. No GSI image is connecting with PC . i have tried every GSI image Mentioned in this post and Other famous Ones as well. In most of them Finger print is also not working. i tried every image for just 10 mints and i fingered out these things may be many more.
Click to expand...
Click to collapse
I have had them all connect to PC undo USB debugging and select transfer files and the camera works fine.
Finger print only works on Galaxy project rom.
Picture included.
I'm on asop extended rom .
wayers said:
I have just installed it on my device and it works wonderfully. I used the AOSP extended and everything's great so far. Thanks a lot for giving us this opportunity, I've been looking for a stock experience on my A8+ plus for a while now
Click to expand...
Click to collapse
Can you tell us what's broke and what's not in the GSI ?
Also how is the experience @mchlbenner ?
SRIHARI_GUY said:
Can you tell us what's broke and what's not in the GSI ?
Also how is the experience @mchlbenner ?
Click to expand...
Click to collapse
The Galaxy project rom all works.
I'm on aosp extended rom and it has two bugs only.
No volte
No finger print.
Dolly works
The rom is a 9/10.
This rom works really good.
mchlbenner said:
The Galaxy project rom all works.
I'm on aosp extended rom and it has two bugs only.
No volte
No finger print.
Dolly works
The rom is a 9/10.
This rom works really good.
Click to expand...
Click to collapse
I can live without VoLTE but someone has to fix the fingerprint issue. Can anyone who tried fixing it open a issue in AOSP Extended's GitHub or any for that matter. I know it's asking for too much . If there's a dirty fix, I am cool with that as well
---------- Post added at 03:53 AM ---------- Previous post was at 02:57 AM ----------
@prashantp01 Does the fingerprint sensor work in Phh-Treble? I am considering to try both Phh-Treble and AOSP Extended. Afaik the GitHub says Fingerprint works just fine and you made a dirty fix for Phh-Treble Camera issue as well. So what can I look forward?
ajnajao1 said:
No GSI image is working good. Camera is still unstable in Re-commanded GSI images and others. No GSI image is connecting with PC . i have tried every GSI image Mentioned in this post and Other famous Ones as well. In most of them Finger print is also not working. i tried every image for just 10 mints and i fingered out these things may be many more.
Click to expand...
Click to collapse
SRIHARI_GUY said:
Can you tell us what's broke and what's not in the GSI ?
Also how is the experience @mchlbenner ?
Click to expand...
Click to collapse
SRIHARI_GUY said:
I can live without VoLTE but someone has to fix the fingerprint issue. Can anyone who tried fixing it open a issue in AOSP Extended's GitHub or any for that matter. I know it's asking for too much . If there's a dirty fix, I am cool with that as well
---------- Post added at 03:53 AM ---------- Previous post was at 02:57 AM ----------
@prashantp01 Does the fingerprint sensor work in Phh-Treble? I am considering to try both Phh-Treble and AOSP Extended. Afaik the GitHub says Fingerprint works just fine and you made a dirty fix for Phh-Treble Camera issue as well. So what can I look forward?
Click to expand...
Click to collapse
1)Camera is fixed for all gsi....just check post #2
2)phone which cant detect by pc.. are because of magisk....magisk breaks the mtp
3)fingerprint is working...only AOSP by phh have latest implementation....other gsi maintainers didn't updated those phh patches, so most likely u will face FP bug on their gsi. Fingerprint from VENDOR is stable
4)VoLTE well idc about it, on AOSP volte is impossible for exynos
SRIHARI_GUY said:
I can live without VoLTE but someone has to fix the fingerprint issue. Can anyone who tried fixing it open a issue in AOSP Extended's GitHub or any for that matter. I know it's asking for too much . If there's a dirty fix, I am cool with that as well
---------- Post added at 03:53 AM ---------- Previous post was at 02:57 AM ----------
@prashantp01 Does the fingerprint sensor work in Phh-Treble? I am considering to try both Phh-Treble and AOSP Extended. Afaik the GitHub says Fingerprint works just fine and you made a dirty fix for Phh-Treble Camera issue as well. So what can I look forward?
Click to expand...
Click to collapse
One thing on aosp extended only 6.0 they boot fine 6.1 and up will not boot.
Related
CyanogenMod 13.0 for Redmi 3S (unofficial and alpha)
Downloads
https://goo.gl/N60xs2
Installation guide
* Download cm-13.0-[latest_date_here]-UNOFFICIAL-land.zip
* Reboot to recovery mode
* Factory reset (for first-time flashers)
* Flash the ROM
* Flash GApps (for first-time flashers)
* Reboot
Screenshot gallery
http://imgur.com/gallery/y0uEQ
Related threads
https://goo.gl/Lsw70c (MIUI thread)
https://goo.gl/OaNVdP (CM Recovery)
XDA:DevDB Information
CyanogenMod 13.0 for Redmi 3S, ROM for the Xiaomi Redmi 3S
Contributors
zwliew
Source Code: https://github.com/zwliew
ROM OS Version: 6.0.x Marshmallow
Based On: CyanogenMod
Version Information
Status: Alpha
Created 2016-11-08
Last Updated 2016-11-27
Notes
Be sure to...
Turn location services off to prevent a constant wakelock
Known issues
GPS (network and fused location work fine)
Goodix fingerprint sensor (FPC sensors work fine)
Changelog
Upcoming
Switch back to the Gello browser
Update libraries, kernel and configs from MIUI 6.12.15
No longer ship with OpenGApps
22-12-2016
Fix IR blaster (courtesy of frapeti)
Fix video recording
Implement pick up to activate Ambient Display
Switch back to Snap camera
Ship with OpenGApps Pico
17-11-2016
Enable LTE option
Add LiveDisplay color profiles and picture adjustment tunables (similar to MIUI)
Add Reliance Jio APNs
Update firmware on install-time
10-11-2016
Update libraries and kernel to MIUI 6.11.3
08-11-2016
Initial alpha release
@zwliew I`m glad to see, that you going to build CM for land!!!
Will we have your kernel? It was just perfect for Ghost!
---------- Post added at 03:51 PM ---------- Previous post was at 02:56 PM ----------
And so -
Redmi 3s
2/16
Clean flash (all wipes)
Issues:
1. Camera can`t record video
2. GPS don`t work
zwliew said:
This build is very much ALPHA - it is neither optimized nor polished
I would love feedback on issues so that I can make this project even better.
Click to expand...
Click to collapse
St.Noigel said:
@zwliew
Issues:
1. Camera can`t record video
2. GPS don`t work
Click to expand...
Click to collapse
3. Goodix fingerprint not works.
zwliew said:
I've no time to fill in the usual OT filler stuff. I'll fill that in later.
Let's get straight to the point.
CyanogenMod 13.0 for Redmi 3S (unofficial and alpha)
Issues
GPS (network and fused location seem to work fine)
Power drain issue on either Wi-Fi or network (haven't found out exactly which)
You tell me - I would really like feedback on issues so that I can further improve the project
Notes
This build is very much ALPHA - it is neither optimized nor polished
I would love feedback on issues so that I can make this project even better.
Make sure you turn off GPS! It will cause a constant wakelock as it is broken at the moment.
Downloads
https://goo.gl/N60xs2
Things to come
I'll probably get the rest of the issues ironed out by the end of the week...
...maybe work on some more power optimization to reach parity with stock MIUI...
...maybe get nightlies
Related threads
https://goo.gl/Lsw70c (MIUI thread)
https://goo.gl/OaNVdP (CM Recovery)
XDA:DevDB Information
CyanogenMod 13.0 for Redmi 3S, ROM for the Xiaomi Redmi 3S
Contributors
zwliew
Source Code:https://github.com/zwliew
ROM OS Version: 6.0.x Marshmallow
Based On: CyanogenMod
Version Information
Status: Alpha
Created 2016-11-08
Last Updated 2016-11-08
Click to expand...
Click to collapse
Gd work brother.
Is stable enouhg for daily use?
zwliew said:
I've no time to fill in the usual OT filler stuff. I'll fill that in later.
Let's get straight to the ...
Click to expand...
Click to collapse
Thank you, this is one of the very important things we need for our device, a XDA development thread.
And you're the first one to give it, that's why you deserve an award.
Biggest thanks! :good:
thank you for the tread... N goodluck brother
This is beautiful. Thank you so much!
P.s. Add nougat on your list of things to come...:fingers-crossed:
---------- Post added at 06:39 AM ---------- Previous post was at 06:37 AM ----------
Aronuser said:
Thank you, this is one of the very important things we need for our device, a XDA development thread.
And you're the first one to give it, that's why you deserve an award.
Biggest thanks! :good:
Click to expand...
Click to collapse
Is that my petition I see in your signature? I'm very amazed to see that
Wonderful ! Thanks a lot for your efforts sir ..
Good to see you here!
one-2-z said:
3. Goodix fingerprint not works.
Click to expand...
Click to collapse
May I know what the command 'getprop ro.product.wt.boardid' prints for you? The fingerprint sensor works fine on my device, but it may be due to differences in model/hardware. Just for the record, my boardid is S88537BA1.
St.Noigel said:
@zwliew I`m glad to see, that you going to build CM for land!!!
Will we have your kernel? It was just perfect for Ghost!
---------- Post added at 03:51 PM ---------- Previous post was at 02:56 PM ----------
And so -
Redmi 3s
2/16
Clean flash (all wipes)
Issues:
1. Camera can`t record video
2. GPS don`t work
Click to expand...
Click to collapse
Camera was broken because of an accidental change I made last minute :/ It's fixed locally (as it should be).
Working on GPS at the moment.
zwliew said:
May I know what the command 'getprop ro.product.wt.boardid' prints for you?
Click to expand...
Click to collapse
S88537AA1
Maybe need add goodix driver like this - github.com/alex9yust/android_kernel_xiaomi_msm8956/commits/cm-13.0 ?
zwliew said:
May I know what the command 'getprop ro.product.wt.boardid' prints for you? The fingerprint sensor works fine on my device, but it may be due to differences in model/hardware. Just for the record, my boardid is S88537BA1.
Camera was broken because of an accidental change I made last minute :/ It's fixed locally (as it should be).
Working on GPS at the moment.
Click to expand...
Click to collapse
So can this possibly be used as a daily driver?(I don't use video recording, so I'm thinking of giving it a go.) BTW, can you please include the Mi Remote app as well, if it isn't available? Also, link to TWRP to install this ROM?
P.S. I know this is too soon to ask, but are you planning for Nougat?:silly:
one-2-z said:
S88537AA1
Maybe need add goodix driver like this - github.com/alex9yust/android_kernel_xiaomi_msm8956/commits/cm-13.0 ?
Click to expand...
Click to collapse
We're using a prebuilt kernel so we don't need any of that. Which MIUI ROM version did you come from? Could you try flashing V8.0.3.0.MALMIDG before flashing this ROM, if you weren't on V8.0.3.0.MALMIDG before? Link: http://bigota.d.miui.com/V8.0.3.0.MALMIDG/miui_HM3SGlobal_V8.0.3.0.MALMIDG_e67fb5fade_6.0.zip
ZelectroKarZ said:
So can this possibly be used as a daily driver?(I don't use video recording, so I'm thinking of giving it a go.) BTW, can you please include the Mi Remote app as well, if it isn't available? Also, link to TWRP to install this ROM?
P.S. I know this is too soon to ask, but are you planning for Nougat?:silly:
Click to expand...
Click to collapse
I don't plan on including the Mi Remote app. IR should work, but I haven't tried it at all. You could try with any of the consumerIR apps on the Play Store.
Other than GPS being broken (don't even turn it on if you treasure battery life) and the battery life not being as good as stock, it seems good enough. I don't have TWRP available to install this ROM, but there's CM recovery if you're fine with it.
Regarding Nougat, I'm not too concerned right now. It's quite unlikely to boot without an updated kernel (which we obviously don't have at this point in time). Either way, the saner plan right now is to get CM 13 fully working and running on nightlies, wait for some kind of kernel source, then start working on CM 14.
Wait... CM Recovery supports OpenGapps installation now? It didn't work before for me... And uh, does Xposed work?
zwliew said:
We're using a prebuilt kernel so we don't need any of that. Which MIUI ROM version did you come from? Could you try flashing V8.0.3.0.MALMIDG before flashing this ROM, if you weren't on V8.0.3.0.MALMIDG before?
Click to expand...
Click to collapse
Ok, i try to flash 8.0.3.0 -> CM later.
Now i'm on Global 6.11.3.
one-2-z said:
Ok, i try to flash 8.0.3.0 -> CM later.
Now i'm on Global 6.11.3.
Click to expand...
Click to collapse
I am on MIUI 8 Global Beta 6.11.8. Hope there will be no kernel freakouts... And, isn't the latest Global Stable ROM MIUI 8 8.0.5.0?
Review
ROM feels pretty smooth throughout.
What works : Dual SIM, Calls & data, WiFi, Bluetooth, SD card
Buggy: GPS, Video recording, VoLTE
THIS ROM WILL NO LONGER BE UPDATED
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What is this ROM about?
This ROM is based on LineageOS but with VoLTE support and some additional security features included. These builds include a lot of security and performance optimizations even for the models that doesn't have VoLTE.
Instructions:
Do NOT dirty flash over non-VoLTE CyanogenMod or LineageOS releases.
Which models support VoLTE?
VoLTE is supported on the models where the baseband firmware supports it. Some models are listed below.
XT1521: It will work for sure if your baseband is up-to-date with what moto released in 6.0.1
Other XT152x models: depends on your baseband
Note for XT1521: Your Baseband will only be up to date if you have been updated to or flashed stock 6.0.1 as released by moto at least once and never downgraded it. If you have downgraded, update your baseband file NON-HLOS.bin to the one from stock 6.0.1 . (follow instructions in other threads at your own risk.)
Note for CDMA users including XT1526 and XT1529 . There have been reported network switching issues. and I recommend CDMA users to avoid this ROM.
Where to get this ROM?
I continuously release updated builds on my github page https://github.com/vishnunaini/lineage-surnia-releases/releases
The latest Build:
2017-06-18 build
Links:
https://github.com/vishnunaini/lineage-surnia-releases/releases/tag/20170618
https://github.com/vishnunaini/line...neage-14.1-20170618-00-vishnunaini-surnia.zip
sha256: 3cde80009a026e03e742727790ebccce92a031efe279507f819aeaebefefb14d
I also GPG sign my releases you can get the detached signature on the release page below
for old releases see here https://github.com/vishnunaini/lineage-surnia-releases/releases
I will release new builds once every week or two.
Only tested on XT1521 .
BUGS:
No Major bugs or show stoppers.
Caveats:
Does NOT include root or debugging features for security reasons.
How to flash :
Download the linked zip.
If you are flashing this ROM for the first time Wipe system, dalvik, cache, userdata and data. All old data will be lost.
Flash the zip using twrp or cm recovery.
Flash your favourite Gapps. Opengapps is recommended. Get them at http://opengapps.org .
Do NOT dirty flash unless you are already using a VoLTE build. Otherwise you will see crashes.
Please use the recovery linked below if you want a tested one
Use this recovery if required: https://github.com/vishnunaini/line...oad/20161229/recommended-recovery-cm-13.0.img
Contributors:
CyanogenMod/LineageOS maintainers and contributors.
Bug reporting:
Report any build specific bugs here https://github.com/vishnunaini/lineage-surnia-releases/issues
Versions:
Android 7.1.2
LineageOS 14.1
Kernel 3.10.x with latest security updates
SELinux: Enforcing
Root: NO
If you use gapps, Always flash gapps immediately after flashing an update or else gapps wont be preserved.
Source Code:
Core: https://github.com/LineageOS
Kernel: https://github.com/vishnunaini/android_kernel_motorola_msm8916 (see branch cm-14.1-custom)
Device changes: https://github.com/vishnunaini/android_device_motorola_msm8916-common (see branch cm-14.1-custom for new volte code that syncs with upstream. see cm-14.1-volte for old code) https://github.com/vishnunaini/android_device_motorola_surnia
Cool.. Btw is there any difference between this and Seraph08's cm14.1 build except the ROM name?
Can we flash using twrp...
N what gapps are recommended..
Sent from my XT1521 using XDA Labs
You can use twrp
use opengapps for android 7.1
enter.hk said:
Can we flash using twrp...
N what gapps are recommended..
Sent from my XT1521 using XDA Labs
Click to expand...
Click to collapse
This build includes latest security updates right down to today and some additional security hardening.
I do not know about Seraph08's build but I will describe what is in my build
cm-14.1 latest
+ VoLTE
+ YAMA LSM security module(helps chrome/chromium sandboxing)
+ PXN no-execute on user_page_table
+ latest upstream security updates till 20161229
+ disable ICMP timestamps for security
+ disable ICMP pings echoes
rushabshah32 said:
Cool.. Btw is there any difference between this and Seraph08's cm14.1 build except the ROM name?
Click to expand...
Click to collapse
Going to attempt this on a 1527. Will report back when flashed....
Update... Everything works perfect on xt1527 on boost mobile, and using fire kernel. LTE works, and have not seen any camera issues.
Did you try the kernel in this ROM? Did you flash fire kernel during the ROM flash itself?
drsemaj87 said:
Going to attempt this on a 1527. Will report back when flashed....
Update... Everything works perfect on xt1527 on boost mobile, and using fire kernel. LTE works, and have not seen any camera issues.
Click to expand...
Click to collapse
vnai said:
Did you try the kernel in this ROM? Did you flash fire kernel during the ROM flash itself?
Click to expand...
Click to collapse
No, I was going to try and run with your kernel, but forgot about it and flashed fire kernel along side the ROM. I can go back and flash the stock kernel and report back...
Update.. Flashed your stock kernel, camera fails to connect. Can't get it to even try. Everything else seems OK.
Another update, don't know if it's important. I'm running a xt1526, not a 1527. Oops.
The performance is good but there is a slight delay in opening background apps which is noticeable. All in all though the rom is stable.
Pair it with pixel mod and firekernel makes it a beast and VOLTE works too.
drsemaj87 said:
No, I was going to try and run with your kernel, but forgot about it and flashed fire kernel along side the ROM. I can go back and flash the stock kernel and report back...
Update.. Flashed your stock kernel, camera fails to connect. Can't get it to even try. Everything else seems OK.
Another update, don't know if it's important. I'm running a xt1526, not a 1527. Oops.
Click to expand...
Click to collapse
VOLTE works on xt1526 ??
Hit THANKS if somebody help you
ROM doesn't flash using TWRP 3.0.2-r1 on XT1521 it just stopped at about 45% & never crossed that
sonnu0100 said:
VOLTE works on xt1526 ??
Hit THANKS if somebody help you
Click to expand...
Click to collapse
I have no idea. I'm on boost mobile, which I don't think supports Volte. How do I find out if it works?
---------- Post added at 02:02 PM ---------- Previous post was at 02:01 PM ----------
Sher1234 said:
ROM doesn't flash using TWRP 3.0.2-r1 on XT1521 it just stopped at about 45% & never crossed that
Click to expand...
Click to collapse
I believe the latest is r5, which is what I have. Try updating twrp.
Side note.. I think Bluetooth might be broken. It connects OK, but once I start music it locks up my stereo. I'll try with your kernel later, and if still have issues, I'll supply logs.
Edit. Bluetooth OK. Stereo was just frozen from cold weather.
Camera bug looks like a bug in the kernel.
I will fix my kernel and make a new release soon
drsemaj87 said:
No, I was going to try and run with your kernel, but forgot about it and flashed fire kernel along side the ROM. I can go back and flash the stock kernel and report back...
Update.. Flashed your stock kernel, camera fails to connect. Can't get it to even try. Everything else seems OK.
Another update, don't know if it's important. I'm running a xt1526, not a 1527. Oops.
Click to expand...
Click to collapse
Prefer cm-13 recovery instead. although it worked fine with twrp in my test.
Sher1234 said:
ROM doesn't flash using TWRP 3.0.2-r1 on XT1521 it just stopped at about 45% & never crossed that
Click to expand...
Click to collapse
vnai said:
Prefer cm-13 recovery instead. although it worked fine with twrp in my test.
Click to expand...
Click to collapse
I tried TWRP 3.0.2-r2 & r5 but still the same result
Try cm-13 recovery linked here https://github.com/vishnunaini/line...oad/20161229/recommended-recovery-cm-13.0.img
Sher1234 said:
I tried TWRP 3.0.2-r2 & r5 but still the same result
Click to expand...
Click to collapse
sonnu0100 said:
VOLTE works on xt1526 ??
Hit THANKS if somebody help you
Click to expand...
Click to collapse
Volte does not work on 1526 as boost mobile/ sprint does not support it.
vnai said:
Try cm-13 recovery linked here https://github.com/vishnunaini/line...oad/20161229/recommended-recovery-cm-13.0.img
Click to expand...
Click to collapse
It worked
Now on lineage 14.1 with Everything working fine except camera
drsemaj87 said:
I have no idea. I'm on boost mobile, which I don't think supports Volte. How do I find out if it works?
---------- Post added at 02:02 PM ---------- Previous post was at 02:01 PM ----------
I believe the latest is r5, which is what I have. Try updating twrp.
Side note.. I think Bluetooth might be broken. It connects OK, but once I start music it locks up my stereo. I'll try with your kernel later, and if still have issues, I'll supply logs.
Edit. Bluetooth OK. Stereo was just frozen from cold weather.
Click to expand...
Click to collapse
drsemaj87 said:
Volte does not work on 1526 as boost mobile/ sprint does not support it.
Click to expand...
Click to collapse
I am using this model on a LTE only network . Tried cm14.1 but it was not able to connect call.
I think that for volte support it has to be enabled in firmware ( only asain varaint xt1521 supports volte out of box and supports on custom ron like cm14.1 and lineage os ) . If developer find a way to enable thia on these surnia models then it will be like a new suprise . Still waiting
Hit THANKS if somebody help you
Code:
* Your warranty is now void(almost)---------- Flashing this rom at your own risk
* If you aren't familar with flashing custom roms --------------- STOP HERE!!
* The roms comes as it is----no workarounds --------- no extended development
* If you wish to change or develop this rom -------------- send a P.M. to me
* I will not help you if you have issues and you didnt follow the guide
* Introduction *
I made this ROM, in order to have the best Pixel Experience without any additional/useless features. It is based on the latest Lineage OS and it was built by me. It is working perfectly on my 3T and it should work with the 3 too (unified build)
*Features*
Based on the latest Lineage OS (built by me)
February Security patch
All Google Apps (replaced the stock ones)
Pixel Launcher with round icon support
Pixel Boot Animation
Pixel Sounds
Pixel Live Wallpapers
Pixel's blue accent
Google Assistant
Root is included (you have to enable it from the dev options)
Round Icon for Settings
OnePlus' Recorder app
*Bugs*
Camera is buggy (expected)
*Installation Guide*
PLEASE FOLLOW IT
1. Download the ROM
1b. Download the add-on package (required)
1c. Download the GApps OpenGapps creates many problems)
2. Boot to TWRP
3. Wipe system, data, cache
4. Flash the ROM
5. Boot to the system and finish the setup wizard
6. Boot to TWRP
7. Flash the GApps
8. Flash the add-on
9. Boot to system
9b. In order to have your Phone App fully working, you must set the Google DIaler / Phone as default on the Settings (See here)
10. VOILA
*Download*
Take a look at the 2nd post
*Donations*
Donations are always welcome. But I think it is more than enough just to press the "Thanks" button
XDA:DevDB Information
Pixel Experience, ROM for the OnePlus 3
Contributors
t-shock
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Unlocked bootloader and TWRP installed
Version Information
Status: Stable
Current Stable Version: 1.1
Stable Release Date: 2017-02-28
Created 2017-02-27
Last Updated 2017-02-28
Download Section
*Download section*
Links for:
ROM: Here
Add-ON: Here (you MUST flash this only on my LAOS and not on the official one)
Gapps: Here
*Changelog*
Version 1.1:
1. Another layout of the rom. Easier to fix any issue and easier to update.
F.A.Q
Frequently Asked Questions (F.A.Q)
You may have some questions about this whole project and this is completely normal. So let’s begin
Q: Google Play Services force closes a lot
A: No reason to panic. Just follow my guide and everything will work just fine.
1. Connect with your WiFi
2. Go to Settings → Apps and find the Google Play Services.
3. Wipe Data and Cache
4. Go to Permission of the app, and enable everything
5. Add your Google Account
6. Voila
Q: The SimToolKit is missing. I need it
A: Flash this zip and it will be restored. I removed it because it wasnt round (uploading)
Q: Can I flash any other Gapps package?
A: NO. The other packages replaces apps that are vital for the phone and it may lead to a bad experience overall
Q: Why did you made this rom?
A: I wanted to have a great Pixel Experience (thus its name)
Q: Any screenshot?
A: Take a look at the Screenshot category
*Thanks to*
Lineage OS Team for managing to create this rom for our 3/3T
@t-shock. Hi. Can I expect this to have the same level of pixel smoothness? I really love smooth Roms and I would really like to try this out. It's just that in my experience, Roms that are based on lineage is tend to be not so smooth. I promise am not trolling. Thanks
kscjx said:
@t-shock. Hi. Can I expect this to have the same level of pixel smoothness? I really love smooth Roms and I would really like to try this out. It's just that in my experience, Roms that are based on lineage is tend to be not so smooth. I promise am not trolling. Thanks
Click to expand...
Click to collapse
Well, I will have to disappoint you on that. The rom is smooth and snappy BUT it is by no means as smooth and fast as the Google Pixel. Ofcourse, you can try it and report because your experience may be different
t-shock said:
Well, I will have to disappoint you on that. The rom is smooth and snappy BUT it is by no means as smooth and fast as the Google Pixel. Ofcourse, you can try it and report because your experience may be different
Click to expand...
Click to collapse
OK. Thanks. Will report on my experiences
Mate! I remember you from the s7 edge scene!
Glad that you decide to show some love to OnePlus 3.
You are a brilliant dev and I can recommend all users to try his work.
:fingers-crossed:
Kookitza said:
Mate! I remember you from the s7 edge scene!
Glad that you decide to show some love to OnePlus 3.
You are a brilliant dev and I can recommend all users to try his work.
:fingers-crossed:
Click to expand...
Click to collapse
Glad to see older users !! Do you own a 3/3T now?
t-shock said:
Glad to see older users !! Do you own a 3/3T now?
Click to expand...
Click to collapse
Yep, sold my s7 and bought op3t
Kookitza said:
Yep, sold my s7 and bought op3t
Click to expand...
Click to collapse
I did exaclty the same
I love my 3T although I miss the IP68
Woow congatulations for the rom man 5 stars from me
@t-shock Mate, i can't pass the wizard because of the FC every 2 sec...
Its always return to the first screen of the wizard :\
Here we go
cannot get the in call ui? any fix?
Dirty Flashed the rom on resurrection remix and working very well so far. I just have an issue with the root. I've tried to switch it on and I'd multiple times from Dev options but it doesn't work. Should i flash supersu for root?
Kookitza said:
@t-shock Mate, i can't pass the wizard because of the FC every 2 sec...
Its always return to the first screen of the wizard :\
Click to expand...
Click to collapse
Me too, when the setup pass through the "Just a sec.." screen it stops working.
How to workaround??
Solved, I've just remove the setup wizard from /system/priv-app by using twrp's file manager.
I will test it today and report back. Need to test whether VoLTE works or not though.
Thumbs up for this ROM. I have been waiting for something like this.
Thank you so much.
---------- Post added at 09:40 ---------- Previous post was at 08:56 ----------
BTW, are you using LineageOS 14.1 with extra open commits?
Because there are lot of fixes in that commit.
That would help us a lot, like VoLTE and other fixes.
---------- Post added at 10:27 ---------- Previous post was at 09:40 ----------
I am going to try this with OpenGapps as with the given one I can't able to add google account and more over there is no Google play services at all and I have to manually download from the apkmirror and even after doing that It keeps crashing. I tried whatever the fix you posted, nothing worked out for me.
Will post the update after flashing with OpenGapps.
michael.the.don said:
cannot get the in call ui? any fix?
Click to expand...
Click to collapse
Yes. Go to Default apps and set Google dialer as the default one.
pankajramnani said:
Dirty Flashed the rom on resurrection remix and working very well so far. I just have an issue with the root. I've tried to switch it on and I'd multiple times from Dev options but it doesn't work. Should i flash supersu for root?
Click to expand...
Click to collapse
For me it works just fine. Try flashing root again, whether it's lineage root or supersu
manikandanguru said:
I will test it today and report back. Need to test whether VoLTE works or not though.
Thumbs up for this ROM. I have been waiting for something like this.
Thank you so much.
---------- Post added at 09:40 ---------- Previous post was at 08:56 ----------
BTW, are you using LineageOS 14.1 with extra open commits?
Because there are lot of fixes in that commit.
That would help us a lot, like VoLTE and other fixes.
---------- Post added at 10:27 ---------- Previous post was at 09:40 ----------
I am going to try this with OpenGapps as with the given one I can't able to add google account and more over there is no Google play services at all and I have to manually download from the apkmirror and even after doing that It keeps crashing. I tried whatever the fix you posted, nothing worked out for me.
Will post the update after flashing with OpenGapps.
Click to expand...
Click to collapse
It is based on purely stock Lineage OS, not with extra commits.
OpenGapps will delete some apps and thus the ROM will have many issues eg no launcher or some apps may miss.
Try flashing the ROM and the Gapps (that I gave) without booting and of course wipe everything again
-BE AWARE-
Flash the given Gapps without booting the system. Let me be more specific. Do not boot the ROM before flashing the given Gapps, otherwise you will have many issues.
Also OpenGapps will delete Pixel Launcher and thus you won't be able to use the ROM
michael.the.don said:
cannot get the in call ui? any fix?
Click to expand...
Click to collapse
Go to settings - apps - click on gear icon - click on 'Phone app' and select Phone.
This helped in my case.
Thread instructions will improve over time so
Read this OP carefully & understand pliz
Intro:
Based On MIUI 9 Global Stable/MIUI Pro
Ported : Redmi 4x
Code:
Disclaimer:
Custom modded ROM so you know the risks.
- angry Gf/wife, thermonuclear war
-getting fired cuz alarm didn't rang
-random bug takes u Outta Earth
We not responsible
Fail-safe:
Alright as measure
1. take nandroid backup
2. Keep a recovery zip of official stable stock ROM
3. Flash it through Twrp, Redwolf, Orange Fox,
Black ,white, yellow, etc etc custom recovery
or PC, laptop : Mi flash
Working :
• Camera
• Fingerprint
• Led Notification
Third Party Themes Issues
~~~ Updates
•Universe Build (Support Switch Beetween Stock MIUI And MIUIPro)
(Baseband v48)
• Kernel Upstreamed
• Some Build Prop Tweak!
~~~Update
Whole File Reviewed and Every Possible File Updated
Kernel Destreamed Due To Some Problem
Vulkan Api Updated
Ril and Ims Blobs Updated!
Fx File Explorer is deployed as Optional Apps,This Is Uninstallable now
Lots Of libs changed And Updated And Added
New Build Prop Tweak!
Performance Stability
Some Bloatware Apps Removed
Ram Usages Optimized
Dolby Atmos Removed
MIUI Universe!
Vowifi Support With MIUI Pro Mod(This Rom Support Switch Beetween Stock MIUI And MIUIPro)
Working for volte now However I don't have volte network But Trying to fix it!
Not Working, Bugs:
• voLTE
Work around :
• VoLTE
Patch From Here:- https://drive.google.com/file/d/1F5iwbROA_iVj4qnQWJYnWp_iiOPLP3wd/view?usp=drivesdk
+++++++ VoLTE Project Patch++++
Its Just An Blank Folder With only Instructions!!!
Its Require Fullfill To Flash Via TWRP!!!
If You Want To Make VoLTE Patch For Yourself,You Try This Zip!!!!
Download It,Upzip It,Read "Readme.txt" And Follow Its Instructions, Full Fill These Blank Folder with lib,xml,jar,apk...delete "Readme.txt" Flash It Thought Receovery!!!!
If You Able To Fix VoLTE Issue,Just Mention Me,Or Send Me Private Message Please,Its Help Me To Add You As My Contributor,And Add Credit List Too!
######### New Patch############
Its My First VoLTE Patch,Must Try It!!!
Download "VoLTE Update.zip" And Flash!!
No Wipe Needed!!!
######### Cust Patch Available#########
This Is A New Patch For Cust, For Fixing Volte,If You Kinda want to Test,Its Advised To Take A Nandroid Backup Before Fla
What's new:
• Nothing here yet
Steps, How to, Flashing guide :
• Wipe Delvik/Art Cache
• Wipe Data
•Wipe Cache
• flash and here we go boot in 15 min
DOWNLOADS Links:
ROM https://drive.google.com/file/d/16zNr4AxnueihZAFRDpebrDYGgoU1y8x0/view?usp=drivesdk
Fingerprint Patch:- https://drive.google.com/file/d/1BHrWjhXUNO1TspN68vNppSOuitxVf5qa/view?usp=drivesdk
Lazyflasher :- https://drive.google.com/file/d/1DC11NdehJd_hkMhkf0BcZve7vqX4tV4m/view?usp=drivesdk
Me :
Just thread updater :')
Connect via telegram
Abhijeet_Rajgor
XDA:DevDB Information
7.1 MIUI 9 Universe stable, ROM for the Xiaomi Redmi 3S
Contributors
Nurujjamanpollob, Abhijeet Rajgor
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Unlocked Bootloader, TWRP
Version Information
Status: No Longer Updated
Created 2018-10-17
Last Updated 2019-08-18
Reserved
Volte Patch Volte Patch Volte Patch!!
Reserved 2
Did you say Android 7.1.2.. That's great... Good work..
Nice Bro
nice work:victory:
arceuss said:
Did you say Android 7.1.2.. That's great... Good work..
Click to expand...
Click to collapse
Tnx pray for me...its stable now
Kiran02 said:
Nice Bro
Click to expand...
Click to collapse
Tnx bro
Not brick on 8.1 Flash? xd
Great Effort. :good:
abcd12598 said:
nice work:victory:
Click to expand...
Click to collapse
Tnxxx
Your Post Is Very Nice& Helpful
Good Job
Plz Fix All Bugs Bro
Does not brick if I install it with android 8.1?
zGhostImperialz said:
Not brick on 8.1 Flash? xd
Click to expand...
Click to collapse
Yeah...u probably flash this rom without issues!
Boot faster than miui stock
Kiran02 said:
Your Post Is Very Nice& Helpful
Good Job
Plz Fix All Bugs Bro
Click to expand...
Click to collapse
Yeah...during my carrier limitation i can't suruly fix volte but i will try my best with for it!!
Hope fix for facedata (this mentioned missing lib in op) will collect and recompile it again to fix!
However no issues,all is ok
Falcon_fan said:
Great Effort. :good:
Click to expand...
Click to collapse
Yeah tnx bro
Nurujjamanpollob said:
Yeah...u probably flash this rom without issues!
Boot faster than miui stock
Click to expand...
Click to collapse
So if I install it from 8.1 it takes longer to start?
zGhostImperialz said:
So if I install it from 8.1 it takes longer to start?
Click to expand...
Click to collapse
Yeah just More 1/2 second needs more!!!
But first boot may take 10-15 min depend on your device,but i have Redmi 3S Prime And It Boot Within 5-7 Mins!
Rom Is Supersmooth and Vulkan Api Added
Nurujjamanpollob said:
Yeah just More 1/2 second needs more!!!
But first boot may take 10-15 min depend on your device,but i have Redmi 3S Prime And It Boot Within 5-7 Mins!
Rom Is Supersmooth and Vulkan Api Added
Click to expand...
Click to collapse
Can we confirm that
Is volte+ finger print wasn't work together in this rom??
Rahul Dilwale said:
Can we confirm that
Is volte+ finger print wasn't work together in this rom??
Click to expand...
Click to collapse
Sure fingerprint work but volte never tested yet
Code:
Disclaimer:
That thing is provided AS IS. If your device is going to cause nuclear explosion, death of your USB pendrives, headphones, bricks, etc - it is only YOUR fault, and I did NOT participate in that actions of YOURS.
LineageOS 15.1
About
LineageOS is a free and open-source operating system for smartphones and tablet computers, based on the Android mobile platform. It is the successor to the custom ROM CyanogenMod, from which it was forked in December 2016 when Cyanogen Inc. announced it was discontinuing development and shut down the infrastructure behind the project. Since Cyanogen Inc. retained the rights to the Cyanogen name, the project rebranded its fork as LineageOS.
Click to expand...
Click to collapse
Installation
Download LOS 15.1 from downloads section
(Optionally) Download Open GApps Choose ARM64, 8.1. Pick the whatever variant suits you most, I prefer micro
(Optionally) Download Magisk OR LineageOS root (pick su for arm64 for 15.1). Do NOT use SuperSU for your privacy sake
Reboot to TWRP
Wipe system, data and cache
Install
Reboot
What's NOT working
LiveDisplay
Color profiles
Changelog
13 august 2018
Older changelogs
Downloads
Latest and previous versions
Source code on GitLab
FAQ
Q: Does VoLTE work?
A: I don't know - there is no VoLTE where I live, so I can't test.
Q: I want to talk about this ROM in some chat and discuss my issues with this ROM!
A: Telegram chat
Q: Can I use microG? Should I install nanomod?
A: MicroG patches are included! You don't need to use anything like NanoMod, etc. Just install microG apk!
Thanks @Rk585 for helping me fix errors during build
Everyone who made and worked device, kernel, and proprietary vendor repositories.
Everyone who worked on Android
Linux developers
XDA:DevDB Information
Lineage OS 15.1, ROM for the LeEco Le 2
Contributors
OctoNezd, Rk585, codeworkx, everyone else who worked on device, kernel, proprietary vendor repositories
Source Code: https://gitlab.com/OctoNezd/android_device_leeco_s2
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
Based On: Lineage OS
Version Information
Status: Testing
Created 2018-07-25
Last Updated 2018-08-13
Bugs compares to the update from Rk585 a week or so ago?
SCrid2000 said:
Bugs compares to the update from Rk585 a week or so ago?
Click to expand...
Click to collapse
This ROM has same issues as all Oreo ROMs on Le 2
OctoNezd said:
This ROM has same issues as all Oreo ROMs on Le 2
Click to expand...
Click to collapse
Better use this device tree https://github.com/rk779/s2
OctoNezd said:
This ROM has same issues as all Oreo ROMs on Le 2
Click to expand...
Click to collapse
Not all Oreo roms have the same problems. AOSiP has some navigational bugs (for me at least), older versions of Lineage don't have working bluetooth calling, and a lot of the newer Lineage builds have finicky GPS. But they're all different in some of the bugs they have. They do all have some similar bugs, such as camera, but that's LeEco's fault.
marios199546 said:
Better use this device tree https://github.com/rk779/s2
Click to expand...
Click to collapse
It uses almost exact copy of it, and I merged it into the device tree I use.
Pushed new build to OTA.
Changelog:
+ Applied substratum patches. Now you can set your own font using substratum and custom theme support is now better
+ Added color configurations to live display - thanks to @Rk585
+ FIxed blue blink after splash - thanks to @Rk585
Known issues:
- LiveDisplay is broken
- Color profiles are broken
- LineageOS style can break in some cases after update, switch it two times to fix that.
Have fun!
OctoNezd said:
Pushed new build to OTA.
Changelog:
+ Applied substratum patches. Now you can set your own font using substratum and custom theme support is now better
+ Added color configurations to live display
+ FIxed blue blink after splash
Known issues:
- LiveDisplay is broken
- Color profiles are broken
- LineageOS style can break in some cases after update, switch it two times to fix that.
Have fun!
Click to expand...
Click to collapse
Can you upload your device tree to github ?
marios199546 said:
Can you upload your device tree to github ?
Click to expand...
Click to collapse
Okay
Live display fixed after flashing overloadoreo 4.5 kernel and blue screen bug also fixed with this kernel . Awesome rom without any heat issue also able to play heavy games without any problem. Super smooth experience. Nice work
SCrid2000 said:
Not all Oreo roms have the same problems. AOSiP has some navigational bugs (for me at least), older versions of Lineage don't have working bluetooth calling, and a lot of the newer Lineage builds have finicky GPS. But they're all different in some of the bugs they have. They do all have some similar bugs, such as camera, but that's LeEco's fault.
Click to expand...
Click to collapse
Lineage 14.1 has no bugs, except IR, but it is not a bug.
HTCDevil said:
Lineage 14.1 has no bugs, except IR, but it is not a bug.
Click to expand...
Click to collapse
Actually camera on 14.1 is much worse than camera on 15.1
OctoNezd said:
Actually camera on 14.1 is much worse than camera on 15.1
Click to expand...
Click to collapse
But it has no fc, and it is not so bad
New version uploaded to OTA (28 July 2018)
Changelog:
+ Added LeEco Extras - now you can toggle QuickCharge
+ Added links to Changelog, Source code and Telegram chat in About Phone
- LiveDisplay and color profiles are still broken
Download link: http://vps533936.ovh.net/ota/zip/s2/lineage_s2-2018-07-28-11-47-41.zip
Source code: https://gitlab.com/le2_lineage
Deepjashan said:
Live display fixed after flashing overloadoreo 4.5 kernel and blue screen bug also fixed with this kernel . Awesome rom without any heat issue also able to play heavy games without any problem. Super smooth experience. Nice work
Click to expand...
Click to collapse
4.5 ??
Can you please share the download link bro .
edan lkr said:
4.5 ??
Can you please share the download link bro .
Click to expand...
Click to collapse
Here it is. https://androidfilehost.com/?fid=5862345805528058520
I noticed that the selfie mode does not work
Can anyone check?
How to launch a selfie mirror
Run the front camera click three dots and choose a selfie mirror
tom001x said:
I noticed that the selfie mode does not work
Can anyone check?
How to launch a selfie mirror
Run the front camera click three dots and choose a selfie mirror
Click to expand...
Click to collapse
I don't have a selfie mirror option at all. What are you talking about?
this is what I meant
https://i.imgur.com/4DcnY1J.jpg
tom001x said:
this is what I meant
https://imgur.com/4DcnY1J
Click to expand...
Click to collapse
Works perfectly fine for me.