THIS ROM WILL NO LONGER BE UPDATED
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What is this ROM about?
This ROM is based on LineageOS but with VoLTE support and some additional security features included. These builds include a lot of security and performance optimizations even for the models that doesn't have VoLTE.
Instructions:
Do NOT dirty flash over non-VoLTE CyanogenMod or LineageOS releases.
Which models support VoLTE?
VoLTE is supported on the models where the baseband firmware supports it. Some models are listed below.
XT1521: It will work for sure if your baseband is up-to-date with what moto released in 6.0.1
Other XT152x models: depends on your baseband
Note for XT1521: Your Baseband will only be up to date if you have been updated to or flashed stock 6.0.1 as released by moto at least once and never downgraded it. If you have downgraded, update your baseband file NON-HLOS.bin to the one from stock 6.0.1 . (follow instructions in other threads at your own risk.)
Note for CDMA users including XT1526 and XT1529 . There have been reported network switching issues. and I recommend CDMA users to avoid this ROM.
Where to get this ROM?
I continuously release updated builds on my github page https://github.com/vishnunaini/lineage-surnia-releases/releases
The latest Build:
2017-06-18 build
Links:
https://github.com/vishnunaini/lineage-surnia-releases/releases/tag/20170618
https://github.com/vishnunaini/line...neage-14.1-20170618-00-vishnunaini-surnia.zip
sha256: 3cde80009a026e03e742727790ebccce92a031efe279507f819aeaebefefb14d
I also GPG sign my releases you can get the detached signature on the release page below
for old releases see here https://github.com/vishnunaini/lineage-surnia-releases/releases
I will release new builds once every week or two.
Only tested on XT1521 .
BUGS:
No Major bugs or show stoppers.
Caveats:
Does NOT include root or debugging features for security reasons.
How to flash :
Download the linked zip.
If you are flashing this ROM for the first time Wipe system, dalvik, cache, userdata and data. All old data will be lost.
Flash the zip using twrp or cm recovery.
Flash your favourite Gapps. Opengapps is recommended. Get them at http://opengapps.org .
Do NOT dirty flash unless you are already using a VoLTE build. Otherwise you will see crashes.
Please use the recovery linked below if you want a tested one
Use this recovery if required: https://github.com/vishnunaini/line...oad/20161229/recommended-recovery-cm-13.0.img
Contributors:
CyanogenMod/LineageOS maintainers and contributors.
Bug reporting:
Report any build specific bugs here https://github.com/vishnunaini/lineage-surnia-releases/issues
Versions:
Android 7.1.2
LineageOS 14.1
Kernel 3.10.x with latest security updates
SELinux: Enforcing
Root: NO
If you use gapps, Always flash gapps immediately after flashing an update or else gapps wont be preserved.
Source Code:
Core: https://github.com/LineageOS
Kernel: https://github.com/vishnunaini/android_kernel_motorola_msm8916 (see branch cm-14.1-custom)
Device changes: https://github.com/vishnunaini/android_device_motorola_msm8916-common (see branch cm-14.1-custom for new volte code that syncs with upstream. see cm-14.1-volte for old code) https://github.com/vishnunaini/android_device_motorola_surnia
Cool.. Btw is there any difference between this and Seraph08's cm14.1 build except the ROM name?
Can we flash using twrp...
N what gapps are recommended..
Sent from my XT1521 using XDA Labs
You can use twrp
use opengapps for android 7.1
enter.hk said:
Can we flash using twrp...
N what gapps are recommended..
Sent from my XT1521 using XDA Labs
Click to expand...
Click to collapse
This build includes latest security updates right down to today and some additional security hardening.
I do not know about Seraph08's build but I will describe what is in my build
cm-14.1 latest
+ VoLTE
+ YAMA LSM security module(helps chrome/chromium sandboxing)
+ PXN no-execute on user_page_table
+ latest upstream security updates till 20161229
+ disable ICMP timestamps for security
+ disable ICMP pings echoes
rushabshah32 said:
Cool.. Btw is there any difference between this and Seraph08's cm14.1 build except the ROM name?
Click to expand...
Click to collapse
Going to attempt this on a 1527. Will report back when flashed....
Update... Everything works perfect on xt1527 on boost mobile, and using fire kernel. LTE works, and have not seen any camera issues.
Did you try the kernel in this ROM? Did you flash fire kernel during the ROM flash itself?
drsemaj87 said:
Going to attempt this on a 1527. Will report back when flashed....
Update... Everything works perfect on xt1527 on boost mobile, and using fire kernel. LTE works, and have not seen any camera issues.
Click to expand...
Click to collapse
vnai said:
Did you try the kernel in this ROM? Did you flash fire kernel during the ROM flash itself?
Click to expand...
Click to collapse
No, I was going to try and run with your kernel, but forgot about it and flashed fire kernel along side the ROM. I can go back and flash the stock kernel and report back...
Update.. Flashed your stock kernel, camera fails to connect. Can't get it to even try. Everything else seems OK.
Another update, don't know if it's important. I'm running a xt1526, not a 1527. Oops.
The performance is good but there is a slight delay in opening background apps which is noticeable. All in all though the rom is stable.
Pair it with pixel mod and firekernel makes it a beast and VOLTE works too.
drsemaj87 said:
No, I was going to try and run with your kernel, but forgot about it and flashed fire kernel along side the ROM. I can go back and flash the stock kernel and report back...
Update.. Flashed your stock kernel, camera fails to connect. Can't get it to even try. Everything else seems OK.
Another update, don't know if it's important. I'm running a xt1526, not a 1527. Oops.
Click to expand...
Click to collapse
VOLTE works on xt1526 ??
Hit THANKS if somebody help you
ROM doesn't flash using TWRP 3.0.2-r1 on XT1521 it just stopped at about 45% & never crossed that
sonnu0100 said:
VOLTE works on xt1526 ??
Hit THANKS if somebody help you
Click to expand...
Click to collapse
I have no idea. I'm on boost mobile, which I don't think supports Volte. How do I find out if it works?
---------- Post added at 02:02 PM ---------- Previous post was at 02:01 PM ----------
Sher1234 said:
ROM doesn't flash using TWRP 3.0.2-r1 on XT1521 it just stopped at about 45% & never crossed that
Click to expand...
Click to collapse
I believe the latest is r5, which is what I have. Try updating twrp.
Side note.. I think Bluetooth might be broken. It connects OK, but once I start music it locks up my stereo. I'll try with your kernel later, and if still have issues, I'll supply logs.
Edit. Bluetooth OK. Stereo was just frozen from cold weather.
Camera bug looks like a bug in the kernel.
I will fix my kernel and make a new release soon
drsemaj87 said:
No, I was going to try and run with your kernel, but forgot about it and flashed fire kernel along side the ROM. I can go back and flash the stock kernel and report back...
Update.. Flashed your stock kernel, camera fails to connect. Can't get it to even try. Everything else seems OK.
Another update, don't know if it's important. I'm running a xt1526, not a 1527. Oops.
Click to expand...
Click to collapse
Prefer cm-13 recovery instead. although it worked fine with twrp in my test.
Sher1234 said:
ROM doesn't flash using TWRP 3.0.2-r1 on XT1521 it just stopped at about 45% & never crossed that
Click to expand...
Click to collapse
vnai said:
Prefer cm-13 recovery instead. although it worked fine with twrp in my test.
Click to expand...
Click to collapse
I tried TWRP 3.0.2-r2 & r5 but still the same result
Try cm-13 recovery linked here https://github.com/vishnunaini/line...oad/20161229/recommended-recovery-cm-13.0.img
Sher1234 said:
I tried TWRP 3.0.2-r2 & r5 but still the same result
Click to expand...
Click to collapse
sonnu0100 said:
VOLTE works on xt1526 ??
Hit THANKS if somebody help you
Click to expand...
Click to collapse
Volte does not work on 1526 as boost mobile/ sprint does not support it.
vnai said:
Try cm-13 recovery linked here https://github.com/vishnunaini/line...oad/20161229/recommended-recovery-cm-13.0.img
Click to expand...
Click to collapse
It worked
Now on lineage 14.1 with Everything working fine except camera
drsemaj87 said:
I have no idea. I'm on boost mobile, which I don't think supports Volte. How do I find out if it works?
---------- Post added at 02:02 PM ---------- Previous post was at 02:01 PM ----------
I believe the latest is r5, which is what I have. Try updating twrp.
Side note.. I think Bluetooth might be broken. It connects OK, but once I start music it locks up my stereo. I'll try with your kernel later, and if still have issues, I'll supply logs.
Edit. Bluetooth OK. Stereo was just frozen from cold weather.
Click to expand...
Click to collapse
drsemaj87 said:
Volte does not work on 1526 as boost mobile/ sprint does not support it.
Click to expand...
Click to collapse
I am using this model on a LTE only network . Tried cm14.1 but it was not able to connect call.
I think that for volte support it has to be enabled in firmware ( only asain varaint xt1521 supports volte out of box and supports on custom ron like cm14.1 and lineage os ) . If developer find a way to enable thia on these surnia models then it will be like a new suprise . Still waiting
Hit THANKS if somebody help you
Related
Welcome to the Android Open Source Project!Android is an open-source software stack for a wide range of mobile devices and a corresponding open-source project led by Google. Here you can find the information and source code you need to learn more about the Android platform. From there you can create custom variants of the Android software stack, port devices and accessories to the Android platform, and ensure your devices are compatible with the Android compatibility definition.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Downloads:
-03302015: click here.
-04102015: click here.
-Gapps: use compatible one with 5.1.
Works:
-Wifi.
-GPS.
-Camera.
-Video Camera.
-Screen Shots.
-Flashlight.
-RIL (calls, data, sms, USSD Code, Contact and Dialer).
-Audio (Playback and recording).
-Video (Playback and recording),
-Recent apps.
-Charging is fixed, check them when phone is locked .
-Now all apps are compatible.
-All related bugs will be set under known issues.
Known Issues:
Video recording need to be fixed.
NFC: install NFC Destroyer to remove it if not used.
Click to expand...
Click to collapse
Installation
Make a backup!.
If you were on CM 10.1 or a stock ROM prior to 4.2, upgrade to stock 4.2 first.
Install ClockworkMod recovery with SELinux support (.tar) (.zip). Older CWM will result in a "status 7" error.
Reboot into recovery.
Wipe data if coming from stock or other ROMs (You may get a "status 7" error if you fail to wipe.).
Install the ROM.
Optionally install the Google Apps Addon.
Click to expand...
Click to collapse
Installation Guide of i9105:
Take same rom.
extract updater-script in meta-inf and rename all s2vep to s2ve.
remove old updater-script and replace edited one.
Flash the rom then NFC Destroyer, enjoy.
Click to expand...
Click to collapse
How To Install Root on 5.1:
Download UPDATE-SuperSU-v2.46.zip and copy to sdcard from attacched file.
Reboot into TWRP Recovery.
Click on Install.
Choose UPDATE-SuperSU-v2.46.zip.
Swipe to start flashing.
Reboot and install SuperSu's Chainfire application and run the script to
complete installation.
Click to expand...
Click to collapse
Changes Log:
03/29/2015:
-Redownload AOSP 5.1 R3 source.
-Rebase the source with new changes for AOSP.
03/30/2015:
-Everything works fine.
-This rom will be updated always.
04/09/2015
-Apply new set of patches.
-Correct some flags on device tree.
-Recompile kernel with Nebula.
04/10/2015
-Recent apps: fixed.
-Data: fixed DON'T TELL ME ANYMORE ABOUT "DATA NOT WORKING FOR ME",
SEE MY ATTACCHED IMAGE OR FLASH COOL/NEBULA TO FIX IT BY YOURSELF.
Click to expand...
Click to collapse
Thanks
- The CyanogenMod team for some of the compatibility patches used in this ROM
Contributors
@haky86
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.0.x
Based On: AOSP
Version Information
Status: Snapshot
Created 2015-03-22
Last Updated 2015-03-30
reserved
Link ?
@haky 86: why am I listed as a guy who made CM12?
LuK1337 said:
@haky 86: why am I listed as a guy who made CM12?
Click to expand...
Click to collapse
probably it's my fault..i will correct
naskodeuces said:
Link ?
Click to expand...
Click to collapse
Not yet.
Reserved2: I just rename the flashable after all this screenshots to reinstall with gapps and root, it's stuck after google animation boot and the only thing is appear is power off menu, consider i am recompiling again
Reserved3: uploaded rom, i will try to fix camera
haky 86 said:
Reserved2: I just rename the flashable after all this screenshots to reinstall with gapps and root, it's stuck after google animation boot and the only thing is appear is power off menu, consider i am recompiling again
Reserved3: uploaded rom, i will try to fix camera
Click to expand...
Click to collapse
Good work! :good:
Message application FC trying to open a sms.
Very fast apart dialer app!
I fetch same problem on omni about dialer
Sent from my GT-I9105P using XDA Free mobile app
haky 86 said:
I fetch same problem on omni about dialer
Sent from my GT-I9105P using XDA Free mobile app
Click to expand...
Click to collapse
Any news Hakam, about fixes?
beegee said:
Any news Hakam, about fixes?
Click to expand...
Click to collapse
I am recompiling againg, after redownload source, and device tree with new changes:angel:
New build is out and i am uploading it.
haky 86 said:
New build is out and i am uploading it.
Click to expand...
Click to collapse
What is the change log
No signal on carrier locked phone :crying:
Sheldd said:
No signal on carrier locked phone :crying:
Click to expand...
Click to collapse
Thanks for telling that
If u flash it, i cant have also data, im carrier locked @haky86 contact andixml i think it is related to SEPolicy.
OK guys I will contact andixml, for hangouts, it's not device tree bug i think its related to gapps, at leat I will test with i9082 device tree renamed to i9105p and see .
Edited: data is work for me!
Sheldd said:
No signal on carrier locked phone :crying:
Click to expand...
Click to collapse
Thanks for feedback the issue, I will recompile a new build based on i9082 renamed to i9105, i am sure will got everything worked or I will f*** myself. after testing the new firmware
haky 86 said:
Thanks for feedback the issue, I will recompile a new build based on i9082 renamed to i9105, i am sure will got everything worked or I will f*** myself. after testing the new firmware
Click to expand...
Click to collapse
No need to, i already tested it.
Same as other ones
beegee said:
No need to, i already tested it.
Same as other ones
Click to expand...
Click to collapse
OK bro, for the new build of aosp I will stard building in the evening based on i9082 renamed to i9105p, i hope to got everything worked
haky 86 said:
Thanks for feedback the issue, I will recompile a new build based on i9082 renamed to i9105, i am sure will got everything worked or I will f*** myself. after testing the new firmware
Click to expand...
Click to collapse
Ok, thanks for that :angel:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1 (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Click to expand...
Click to collapse
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
IMPORTANT INFORMATION
Click to expand...
Click to collapse
We'll not support users and answer questions from users which:
- are running a custom kernel
- have flashed mods
- modified system files
- didn't follow our instructions word by word
- are unfriendly
INSTRUCTIONS
Click to expand...
Click to collapse
First time installing CyanogenMod 12.1 to your Galaxy S3 I9305, or coming from another ROM:
- Read known issues ans FAQs
- Flash one of the recovery images (CWM or TWRP)
- Copy GApps and CM12.1 ZIPs to your SDCard
- Boot into Recovery
- Flash CM12.1 zip from SDCard
- Flash GApps zip from SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore system data using Titanium Backup!
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of CyanogenMod 12.1:
- Copy CM12.1 ZIP to your SDCard
- Boot into Recovery
- Flash CM12.1 zip from SDCard
- Reboot
Working:
Click to expand...
Click to collapse
Wifi
Camera
Bluetooth
3G
Sensors
Home Button Wake
GPS (maybe)
RIL
Carrier APN
Keyboard on first boot
Added HDMI support but not sure if it works
Not Working
Click to expand...
Click to collapse
Snapchat/Instagram video uploads
DOWNLOADS
Click to expand...
Click to collapse
Stable
Kernel Sources:
https://github.com/CyanogenMod/android_kernel_samsung_smdk4412
for complete CM12.1 changelog please visit http://www.cmxlog.com/12.1/#
28/03/2015:
Initial release
28/03/2015:
updated to 5.1 r3 latest version by google
alpha 3 29/03/2015:
added 720p front camera recording
updated media codecs
added hdmi support
merged libril modems
added more omx codes support
beta 2 3/4/2015:
cm source updated
data fixed hopefully thanks to @sbrissen
beta 3 7/4/2015:
added back most features from beta 1:
720P front camera recording, updated media codecs
fixed a2sd
beta 4 10/4/2015:
fixed broken wifi
stable 1 18/4/2015:
Updated cm sources
Added hdmi support
More ril changes thanks to the t0lte community
beta testing 20/5/2015:
updated to 5.1.1
updated missing selinux policies that was stopping sim detection
selinux set to enforcing, i think the device is ready for it
netflix fixed and should now load
stable 2 11/06/2015:
updated with latest cm sources and fixes
answering calls fixed
stable 3 16/5/2015:
updated latest sources
added more exynos4 hacks
fixed netflix loading
stable 4 11/07/15:
updated to 5.1.1_r6
boosted rear speaker volume
Stable 27/07/15:
Updated cm sources
06/08/2015:
Updated Cm sources
Back to pure cm sources
14/08/2015:
updated Cm sources
stagefright vulnerability fixed by cm
26/09/2015
updated CM sources
fixed bluetooth share fc
added 720p front recording
downloaded, booted and ready to play around with it. Testing now some things without gapps. I'll edit my post later if I come across bugs etc.
edit:
did you upload the right file? because it says android version 5.0.2, build date Feb 28?
The file is named 20150228 as well so it's obviously the wrong download link. Looking forward to trying this out
ross232 said:
The file is named 20150228 as well so it's obviously the wrong download link. Looking forward to trying this out
Click to expand...
Click to collapse
oh bugger i must of done the wrong one :crying::crying: no worries ill upload the proper one
winxuser said:
oh bugger i must of done the wrong one :crying::crying: no worries ill upload the proper one
Click to expand...
Click to collapse
link fixed,, sorry guys
CM 12.1
Amazing work on this rom! I have found one problem so far which is a settings FC on startup. What are the improvements with 5.1? Better battery life I hope... I'll report any bugs that I find
Thanks
Jortu
Jortu said:
Amazing work on this rom! I have found one problem so far which is a settings FC on startup. What are the improvements with 5.1? Better battery life I hope... I'll report any bugs that I find
Thanks
Jortu
Click to expand...
Click to collapse
That fc is the same with 5.0.2 if you try to go through next button quickly
Sent from my LG-D855 using XDA Free mobile app
Will have to wait and see with battery life.. For me it seems that 5.1 is smoother tan 5.0 at this stage of development
Sent from my LG-D855 using XDA Free mobile app
The main thing im worried about is data connection at this point... All other bugs will most likely come with time
Sent from my LG-D855 using XDA Free mobile app
Ok I have this installed Will give it a spin and let you know how things go.
Does anyone know if Xposed works in this version?
EDIT: And the answer is an obvious no. Apparently xposed needs further updates to support 5.1.
new build uploading now
winxuser said:
new build uploading now
Click to expand...
Click to collapse
In the previous does not work with what mode the display of network use.
3G does not work further
The rest until I test
krakowiak84 said:
In the previous does not work with what mode the display of network use.
3G does not work further
The rest until I test
Click to expand...
Click to collapse
On note 2 t0lte someone said that data was working for them but didnt show the connections aka lte, 3g etc
Sent from my LG-D855 using XDA Free mobile app
On my recent RR 5.1 preview build it is the same. I have data connection, but no speed or type icon (2G, 3G or LTE) is visible.
winxuser said:
On note 2 t0lte someone said that data was working for them but didnt show the connections aka lte, 3g etc
Sent from my LG-D855 using XDA Free mobile app
Click to expand...
Click to collapse
LTE works perfectly for me, the problem is only with 3G
rodman01 said:
On my recent RR 5.1 preview build it is the same. I have data connection, but no speed or type icon (2G, 3G or LTE) is visible.
Click to expand...
Click to collapse
krakowiak84 said:
LTE works perfectly for me, the problem is only with 3G
Click to expand...
Click to collapse
oh nice work on bringing RR to 5.1,, hmm so seems like we just have to wait for our teams to fix the problem i think..
new build is uploaded,, this one has only been updated to latest 5.1 r3
winxuser said:
new build is uploaded,, this one has only been updated to latest 5.1 r3
Click to expand...
Click to collapse
what I have to do?
i install directly this new build or the older?
andreazimba said:
what I have to do?
i install directly this new build or the older?
Click to expand...
Click to collapse
its up to you if you want to stick with the older build or the new build..
a new build should be up tomorrow morning when i wake up with lots of changes,,,,,,, HOPEFULLY
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
LineageOS is a free, community built, aftermarket firmware distribution of Android, which is designed to increase performance and reliability over stock Android for your device.
All of the LineageOS source code is available on their github.
What's working
Mostly everything.
Installation instructions
Get ROM, GApps, Addons (optional) and put it in phone. (Temporary) Get the touchscreen fix too.
Boot to recovery mode, use TWRP 3.0.2 only as TWRP 3.0.0 reportedly has issues with flashing it.
Do a factory reset. If you are coming from some previous version of LineageOS itself then this step is optional.
Flash ROM, then flash GApps, and then flash the addons if any.
(Temporary) Flash the touchscreen fix.
Reboot. First boot will take time.
Downloads
ROM - LineageOS Downloads
Touchscreen fix - https://androidfilehost.com/?fid=889964283620759706
GApps - opengapps.org (select variant as 'ARM')
Root Access Addon - LineageOS Official Addons (our variant is arm)
Boosted Audio - Boosted Audio | Normal Audio
Source
Device Tree
Kernel Source
Credits
@ngoquang2708 @Lahkeda @Agent_fabulous
@Olivier @AdrianDC
@Agent_fabulous @STRYDER~007
@PecanCM @AdrianDC and all others who worked in development for Sony devices.
XDA:DevDB Information
LineageOS 14.1, ROM for the Sony Xperia L
Contributors
corphish
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
Version Information
Status: Nightly
Created 2016-09-26
Last Updated 2017-10-19
F.A.Q
I get some errors during flashing, is it ok?
A. Yes, as long as you are using TWRP 3.0.2.
I get random errors like FCs etc related to Google Apps, what should I do?
A. I would recommend you to cleanly install the ROM and flash GApps just after that.
Ok, this time I see FCs but thats in other apps, what should I do?
A. As I said, CM is young, it will evolve eventually, fixing the bugs you get eventually.
But I get errors again, and I think this maybe a device related error, help?
A. Report with a logcat or atleast mention a sure shot way of reproducing it.
I want root, what should I do?
A. Enable root access from developer options.
Changelog
lineage-14.1-20170124
- Android 7.1 -> 7.1.1
- Initial LineageOS release..
20161029 (cm-14.1)
- Android 7.0 -> 7.1
- Video recording now works.
20161012
-NRD90U -> NBD90Z
-Boosted Headphones volume.
-Switched to Google FM Radio app.
20160926 (cm-14.0)
- Initial Release.
Fabulous work mate! CM Finally :'D
Great job dev
Sent from my SM-J700F using Tapatalk
Awesome!
I'll test it asap
Nice work @corphish! Keep it up! :good:
Great Work @corpish!
corphish said:
20160926
- Initial Release.
Click to expand...
Click to collapse
Amazing everything works fine except some settings
PS: Is the a cm theme engine cause i cant find one
Pyramid Head said:
Amazing everything works fine except some settings
PS: Is the a cm theme engine cause i cant find one
Click to expand...
Click to collapse
CM theme engine isn't merged yet.
Nougat saw some changes in UI elements like system ui and other stuff, which is why theme engine needs to be updated, which will be done eventually.
Excellent news! Thank you for working on this rom! Will try it soon, when a have a little bit of time available...
Awesome!! Hope you can update zapdos too
Is TWRP 2.8.7.0 okay too? Because this is the TWRP version which is available as FOTAkernel
Sent from my taoshan using XDA Labs
Aenadon said:
Is TWRP 2.8.7.0 okay too? Because this is the TWRP version which is available as FOTAkernel
Sent from my taoshan using XDA Labs
Click to expand...
Click to collapse
No,
Get the latest TWRP from twrp.me and flash it in FOTAKernel partition. Recovery Installer app does have support to flash custom recoveries .
Flashing was tested on 3.0.0 initially and for some reason it did not work, it worked with 3.0.2 which is why its recommended in first place.
corphish said:
No,
Get the latest TWRP from twrp.me and flash it in FOTAKernel partition. Recovery Installer app does have support to flash custom recoveries .
Flashing was tested on 3.0.0 initially and for some reason it did not work, it worked with 3.0.2 which is why its recommended in first place.
Click to expand...
Click to collapse
Thanks
Still, I have a problem: when I try to download the img, the download link only downloads the 6,68kb download page as HTML (with the correct filename though)
This is the download link I used: https://dl.twrp.me/taoshan/twrp-3.0.2-0-taoshan.img
Sent from my taoshan using XDA Labs
Quick Look at This ROM !!!
Here's a quick look at cyanogenMod 14 nougat on Xperia L
https://www.youtube.com/watch?v=Kpr1Dq1NVMQ
I can flash any Nougat ROM's using TWRP 2.8.7.0
Ishrak said:
Here's a quick look at cyanogenMod 14 nougat on Xperia L
https://www.youtube.com/watch?v=Kpr1Dq1NVMQ
Click to expand...
Click to collapse
Just watched it; it seems to be running pretty nicely; I might try it out sometime.
Though, I feel sorry for the devs; they have a lot of work on their shoulders.
Alpha 2 is up
Changelog
-NRD90U -> NBD90Z
-Boosted Headphones volume.
-Switched to Google FM Radio app.
how is it working?????
---------- Post added at 02:05 PM ---------- Previous post was at 01:19 PM ----------
i got this error
patching image system undonditonally
e: unknown command [log]
e: unknown command [log]
detected file system ext4
but after flashing stuck in boot loop .
LineageOS 13.0 for SM-G925F
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards (Oh wait..),
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Working:
- RIL
- WiFi
- Sensors (Expect fingerprint)
- GPS
- Google apps
- Sound
- Button illumination
- NFC
- MTP
- IR transmitter
- 3D acceleration in games
- Stuff i am too lazy to test, report back in post
Not working
- Fingerprint scaner
- Camera
- Video playback in some formats
- App switch button (Uses old layout (Hold home key) will fix soon)
- Bluetooth(Has some issues as of now will look into it)
- Report other bugs/issues in posts
DO NOT POST BUG REPORTS WITHOUT LOGCAT OR STEPS TO REPRODUCE BUG
(some bugs also require dmesg and/or (last_)kmsg)
Downloads:mega.nz
RomHut
MD5: BECEC5B17B6C32CA7A3552613EDEB6D1
gapps:http://opengapps.org/
Install gapps right after rom (dont exit recovery) and dont wipe cache/dalvink/data before going thru gapps setup
Based On Android 6.0.1 marshmallow
Changelog
08.01.2017.
First public release
XDA:DevDB Information
LineageOS 13.0 for SM-G925F, ROM for the Samsung Galaxy S6 Edge
Contributors
Ivan_Meler
Source Code: http://github.com/ivanmeler
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Version Information
Status: Testing
Current Beta Version: 0.1.0
Beta Release Date: 2017-01-08
Created 2017-01-08
Last Updated 2017-01-08
what gapps do i need at opengapps.org???(when i install gapps i got an errorcode 64 )
lambik333 said:
what gapps do i need at opengapps.org???(when i install gapps i got an errorcode 64 )
Click to expand...
Click to collapse
use arm64 i prefer pico
Ivan_Meler said:
use arm64 i prefer pico
Click to expand...
Click to collapse
thnx and another question, how can i make an connection between mobile and computer because i can't copy gapps to mobile....
lambik333 said:
thnx and another question, how can i make an connection between mobile and computer because i can't copy gapps to mobile....
Click to expand...
Click to collapse
Twrp should have MTP enabled by default or just copy them from once android boots
Ivan_Meler said:
Twrp should have MTP enabled by default or just copy them from once android boots
Click to expand...
Click to collapse
android is booting, but computer sees mobile only as a battery....so i cant copy anything....btw rom is very fast and working good!!!!:good::good::good:
aha i copy the file when i was in TWRP.....
eagerly waiting to fix the bugs
display seems a bit dull like low saturation any fix ? anyways some lag here and there but overall very good. Hope to see camera working soon. Join the telegram group as devs there can help you with camera - tg://join?invite=CaccS0A5Th5ZJmn7IOn3xg
Kylesamaroo said:
display seems a bit dull like low saturation any fix ? anyways some lag here and there but overall very good. Hope to see camera working soon. Join the telegram group as devs there can help you with camera - tg://join?invite=CaccS0A5Th5ZJmn7IOn3xg
Click to expand...
Click to collapse
Try turning Livedisplay off, seems to have stopped it for me
Sent from my SM-G925F using Tapatalk
Good work!
I am loving this rom so far
Sent from my SM-G925F using Tapatalk
Yo Ivan! Good job, nice ROM!
But...dude...port iOS S6 Edge...
I am trying this on SM-G925W8, I know it says for F, but worth a shot.
---------- Post added at 01:56 AM ---------- Previous post was at 01:48 AM ----------
RandomUsername02 said:
I am trying this on SM-G925W8, I know it says for F, but worth a shot.
Click to expand...
Click to collapse
nope, says the package is for zerolte zeroltexx, says my device is zeroltecan.
Well, I hope you support the W8 model.
RandomUsername02 said:
I am trying this on SM-G925W8, I know it says for F, but worth a shot.
---------- Post added at 01:56 AM ---------- Previous post was at 01:48 AM ----------
nope, says the package is for zerolte zeroltexx, says my device is zeroltecan.
Well, I hope you support the W8 model.
Click to expand...
Click to collapse
I will add support for all other variants as soon as i resolve few issues that should be 2 builds from now since current one just resolves some omx issues and app switch button next on the list camera and fingerprint scanner
Good Work Looking Forword To It
Hope Everything goes smooth like butter While Fixing Those bugs
RandomUsername02 said:
I am trying this on SM-G925W8, I know it says for F, but worth a shot.
---------- Post added at 01:56 AM ---------- Previous post was at 01:48 AM ----------
nope, says the package is for zerolte zeroltexx, says my device is zeroltecan.
Well, I hope you support the W8 model.
Click to expand...
Click to collapse
If you're impatient like myself, you can remove the product code lines in the updater script within the zip and repackage then flash. [zip wont compress to the same size but it still flashes okay.]
ONLY DO THIS IF YOU KNOW WHAT YOU ARE DOING - ANYONE ELSE READING THIS.
I recently broke the screen on my s6 edge so I've been using the s4 ltecan which I had used the same method. Just also keep in mind you'll most likely need to flash a supported kernel (T/W8) and a callfix. (W8)
What the dev emplemented into the updater script is a safe guard for unsupported devices ie. TWRP stops the flash. And with good reason!
AGAIN ONLY DO THIS IF YOU ARE FULLY CAPABLE OF RESOLVING YOUR OWN SOFT BRICKS.
Ps sorry for caps, mobile formatting is iffy.
Ivan_Meler said:
I will add support for all other variants as soon as i resolve few issues that should be 2 builds from now since current one just resolves some omx issues and app switch button next on the list camera and fingerprint scanner
Click to expand...
Click to collapse
Thank you!
Hello,
Screenshot please,
what special feature does your ROM,
Testing this out on a G925T so phone calls naturally don't work, but this is still absolutely amazing. Mobile data, wi-fi, root all work great, and everything is really smooth. If calls worked, I'd honestly start using this as a daily driver.
One thing I noticed that doesn't work: automatically turning on the phone when the flip wallet case is opened (using an official Samsung flip wallet case). But, that's such a minor issue that I could live without it.
tomiga said:
Testing this out on a G925T so phone calls naturally don't work, but this is still absolutely amazing. Mobile data, wi-fi, root all work great, and everything is really smooth. If calls worked, I'd honestly start using this as a daily driver.
One thing I noticed that doesn't work: automatically turning on the phone when the flip wallet case is opened (using an official Samsung flip wallet case). But, that's such a minor issue that I could live without it.
Click to expand...
Click to collapse
Hey glad to see positive response ill look into implementing 925T support soon and support for wallet case has been implemented in new release which should also have few minor issues resolved
winny57 said:
Hello,
Screenshot please,
what special feature does your ROM,
Click to expand...
Click to collapse
Check out screenshots tab
Code:
#include "std_disclaimer.h"
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Who cares about Lineage, when you can #GETRESURRECTED ?
INSTALLATION INSTRUCTIONS
Flashable via adb with
Code:
fastboot flash system <systemimagename>
plus /data partition wipe via TWRP
or
via my TWRP build using Install Image -> System plus /data partition wipe
FROM BUILD BENVENUTI THE RELEASE ARE FLASHABLE!
PLACE THE ZIP ON SD AND FLASH IT IN TWRP WITH NO WIPES!
CHANGELOG
Click here for the changelog
DOWNLOADS
RROS6_build_ALI
RROS6_build_BENVENUTI
RROS6_build_CARNERA
RROS6_build_CARNERA_r1
Kernel and GPL concerns
I'm actually not violating any GPL license due to the unreleased kernel source from Huawei.
The kernel used here, it's just the stock one without anykind of modification.
As the kernel sources will be released by our beloved Huawei Opensource department, it'll be added over here.
Support
I'm do offering support and some chitty-chat times over this Telegram group (over XDA support of course).
Feel free to join.
XDA:DevDB Information
Resurrection Remix, ROM for the Huawei P8lite/P8 Lite
Contributors
dil3mm4.dev, phhusson
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
ROM Firmware Required: EMUI 8 or other Oreo ROM
Based On: LOS
Version Information
Status: Testing
Created 2018-04-07
Last Updated 2018-05-12
You are the best ?
But don't say "who care about lineage os..."
when your ROM is Los based, furthermore lineage is a lot more stable than RR
francos21 said:
You are the best
But don't say "who care about lineage os..."
when your ROM is Los based, furthermore lineage is a lot more stable than RR
Click to expand...
Click to collapse
No disrespect meant here, that "who cares" was just to spice the things up a bit!
About the stability, meh.
It actually depends on a handful amount of factors.
Anyways, thanks for your interest.
I'm going to give it a try
Hope it will boot (i'm still getting issue to boot LineageOS from haky86 (without Magisk/SU, it works but with it, it won't boot)) and i also hope the battery is good like on the LineageOS, AOSP Oreo
l-0-w said:
I'm going to give it a try
Hope it will boot (i'm still getting issue to boot LineageOS from haky86 (without Magisk/SU, it works but with it, it won't boot)) and i also hope the battery is good like on the LineageOS, AOSP Oreo
Click to expand...
Click to collapse
If you will face problems, just join the Telegram group.
Magisk at the moment is unsupported.
Use LOS su package for arm64.
dil3mm4.dev said:
If you will face problems, just join the Telegram group.
Magisk at the moment is unsupported.
Use LOS su package for arm64.
Click to expand...
Click to collapse
Yeah, I will maybe join later, but could you explain me from rebranding step how you get it booting ? (I'm actually on AOSP 8.1 SU+Gapps from phh)
Thanks
And btw, good job for new update
The Rom works as it should, the connection to the data network and the reception is very slow not to mention the icon that marks the network always at 100% but this is a problem of all the Treble Rom. For the rest it seems to work everything
Fr0nK said:
The Rom works as it should, the connection to the data network and the reception is very slow not to mention the icon that marks the network always at 100% but this is a problem of all the Treble Rom. For the rest it seems to work everything
Click to expand...
Click to collapse
A fix for "always 100% network" behaviour is coming in the next hours along Gapps build.
By the way, that's only a graphical glitch.
It doesn't affect signal receipt.
Thanks for your interest.
l-0-w said:
Yeah, I will maybe join later, but could you explain me from rebranding step how you get it booting ? (I'm actually on AOSP 8.1 SU+Gapps from phh)
Thanks
And btw, good job for new update
Click to expand...
Click to collapse
Just flashed like AOSP, nothing more.
The thing is that some users run into issues and someother don't, that's why I've suggested to join the Telegram group, so we can troubleshoot whatever happens in your specific situation.
Thanks for your kind words.
Congratulations for the latest build man.
Fr0nK said:
Congratulations for the latest build man.
Click to expand...
Click to collapse
Thanks, a new build it's up too!
Hi @dil3mm4.dev,
i'm coming from LOS 15.1
i have wiped cache plus dalvik
formatted System and Data
The fingerprint won't work. (i cannot even register one), what can i do?
the calls are a bit laggy too.
Thanks for this! I installed tha latest build but as in LOS and AOSP music player doesn't work. Is there any way to fix that or will it be fixed in next build?
If I'm installing it correctly should it boot with the Android boot animation or with the RROS boot animation?
YoussefR said:
If I'm installing it correctly should it boot with the Android boot animation or with the RROS boot animation?
Click to expand...
Click to collapse
For me it boots with android boot animation so it should be good.
bill_klpd said:
For me it boots with android boot animation so it should be good.
Click to expand...
Click to collapse
How much time did it take on its firstboot?
YoussefR said:
How much time did it take on its firstboot?
Click to expand...
Click to collapse
It needed some time but if it reboots then something is not right
bill_klpd said:
It needed some time but if it reboots then something is not right
Click to expand...
Click to collapse
It reboots what should I do??!
YoussefR said:
It reboots what should I do??!
Click to expand...
Click to collapse
I was in a bootloop before. What I did was to restore form eRecovery and redo everything(flash oreo etc.) I hope it works for you too.
bill_klpd said:
I was in a bootloop before. What I did was to restore form eRecovery and redo everything(flash oreo etc.) I hope it works for you too.
Click to expand...
Click to collapse
Well I got toboot it somehow but when I go to the playstore to download anything it stucks on download pending or downloading and it keeps doing this without downloading anything?