Code:
#include "std_disclaimer.h"
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Who cares about Lineage, when you can #GETRESURRECTED ?
INSTALLATION INSTRUCTIONS
Flashable via adb with
Code:
fastboot flash system <systemimagename>
plus /data partition wipe via TWRP
or
via my TWRP build using Install Image -> System plus /data partition wipe
FROM BUILD BENVENUTI THE RELEASE ARE FLASHABLE!
PLACE THE ZIP ON SD AND FLASH IT IN TWRP WITH NO WIPES!
CHANGELOG
Click here for the changelog
DOWNLOADS
RROS6_build_ALI
RROS6_build_BENVENUTI
RROS6_build_CARNERA
RROS6_build_CARNERA_r1
Kernel and GPL concerns
I'm actually not violating any GPL license due to the unreleased kernel source from Huawei.
The kernel used here, it's just the stock one without anykind of modification.
As the kernel sources will be released by our beloved Huawei Opensource department, it'll be added over here.
Support
I'm do offering support and some chitty-chat times over this Telegram group (over XDA support of course).
Feel free to join.
XDA:DevDB Information
Resurrection Remix, ROM for the Huawei P8lite/P8 Lite
Contributors
dil3mm4.dev, phhusson
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
ROM Firmware Required: EMUI 8 or other Oreo ROM
Based On: LOS
Version Information
Status: Testing
Created 2018-04-07
Last Updated 2018-05-12
You are the best ?
But don't say "who care about lineage os..."
when your ROM is Los based, furthermore lineage is a lot more stable than RR
francos21 said:
You are the best
But don't say "who care about lineage os..."
when your ROM is Los based, furthermore lineage is a lot more stable than RR
Click to expand...
Click to collapse
No disrespect meant here, that "who cares" was just to spice the things up a bit!
About the stability, meh.
It actually depends on a handful amount of factors.
Anyways, thanks for your interest.
I'm going to give it a try
Hope it will boot (i'm still getting issue to boot LineageOS from haky86 (without Magisk/SU, it works but with it, it won't boot)) and i also hope the battery is good like on the LineageOS, AOSP Oreo
l-0-w said:
I'm going to give it a try
Hope it will boot (i'm still getting issue to boot LineageOS from haky86 (without Magisk/SU, it works but with it, it won't boot)) and i also hope the battery is good like on the LineageOS, AOSP Oreo
Click to expand...
Click to collapse
If you will face problems, just join the Telegram group.
Magisk at the moment is unsupported.
Use LOS su package for arm64.
dil3mm4.dev said:
If you will face problems, just join the Telegram group.
Magisk at the moment is unsupported.
Use LOS su package for arm64.
Click to expand...
Click to collapse
Yeah, I will maybe join later, but could you explain me from rebranding step how you get it booting ? (I'm actually on AOSP 8.1 SU+Gapps from phh)
Thanks
And btw, good job for new update
The Rom works as it should, the connection to the data network and the reception is very slow not to mention the icon that marks the network always at 100% but this is a problem of all the Treble Rom. For the rest it seems to work everything
Fr0nK said:
The Rom works as it should, the connection to the data network and the reception is very slow not to mention the icon that marks the network always at 100% but this is a problem of all the Treble Rom. For the rest it seems to work everything
Click to expand...
Click to collapse
A fix for "always 100% network" behaviour is coming in the next hours along Gapps build.
By the way, that's only a graphical glitch.
It doesn't affect signal receipt.
Thanks for your interest.
l-0-w said:
Yeah, I will maybe join later, but could you explain me from rebranding step how you get it booting ? (I'm actually on AOSP 8.1 SU+Gapps from phh)
Thanks
And btw, good job for new update
Click to expand...
Click to collapse
Just flashed like AOSP, nothing more.
The thing is that some users run into issues and someother don't, that's why I've suggested to join the Telegram group, so we can troubleshoot whatever happens in your specific situation.
Thanks for your kind words.
Congratulations for the latest build man.
Fr0nK said:
Congratulations for the latest build man.
Click to expand...
Click to collapse
Thanks, a new build it's up too!
Hi @dil3mm4.dev,
i'm coming from LOS 15.1
i have wiped cache plus dalvik
formatted System and Data
The fingerprint won't work. (i cannot even register one), what can i do?
the calls are a bit laggy too.
Thanks for this! I installed tha latest build but as in LOS and AOSP music player doesn't work. Is there any way to fix that or will it be fixed in next build?
If I'm installing it correctly should it boot with the Android boot animation or with the RROS boot animation?
YoussefR said:
If I'm installing it correctly should it boot with the Android boot animation or with the RROS boot animation?
Click to expand...
Click to collapse
For me it boots with android boot animation so it should be good.
bill_klpd said:
For me it boots with android boot animation so it should be good.
Click to expand...
Click to collapse
How much time did it take on its firstboot?
YoussefR said:
How much time did it take on its firstboot?
Click to expand...
Click to collapse
It needed some time but if it reboots then something is not right
bill_klpd said:
It needed some time but if it reboots then something is not right
Click to expand...
Click to collapse
It reboots what should I do??!
YoussefR said:
It reboots what should I do??!
Click to expand...
Click to collapse
I was in a bootloop before. What I did was to restore form eRecovery and redo everything(flash oreo etc.) I hope it works for you too.
bill_klpd said:
I was in a bootloop before. What I did was to restore form eRecovery and redo everything(flash oreo etc.) I hope it works for you too.
Click to expand...
Click to collapse
Well I got toboot it somehow but when I go to the playstore to download anything it stucks on download pending or downloading and it keeps doing this without downloading anything?
Related
CyanogenOS 12.1S UnOfficial Rom for i9305[/CENTER]
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.x (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Click to expand...
Click to collapse
About CM:
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Important Information:
1.This is an unofficial rom ! It is not developped by OnePlus or Cyanogen Inc
2.This is still in beta version ! So you may find bugs ! I might need help from devs to fix them as I am a little dev
3.Updates wont be that fast ! My connection is so slow
4.This rom includes all OnePlus and Cyanogen Inc apps including Hexo Theme
5.for variety of choises I put CyanogenOS and CYanogenMod apps!You may find two icons of the same app but different versions
6.I need testersssss
Bugs(that I found,if you found any new one tell me)
1.Flashing will take a long time
2.In first boot,after some minutes , bootanimation will disappear and a black screen comes for 2 or 3 secs!Dont be afraid
3.If you get unknown baseband flash another modem from here http://sourceforge.net/projects/amchaprojekt/files/Modems/
4.tell me I am sure there are more
5.custom kernels might not work I tested agni v2.9.1 and I got a black screen
Download:
Beta 2 (stable build ) release : uploading now ...
I built beta 2 but I need testers.It might not even flash or boot so I need testers and reports
Change log (not confirmed ! until testing)
Baseband fixed
CM sources updates
Bug fixes
Added more tweaks and optimizations
...
Beta 1 20150501 release https://mega.co.nz/#!VRkSCRYJ!Hh8LZHpx_vKpOrxMEAJWCMwVCM4IUxVnUucv41ipNIk
Installation:
Copy GApps and CyanogenOS ZIPs to your SDCard
Boot into Recovery
wipe data factory reset
wipe cache
wipe dalvic cache
format system
Flash CyanogenOS zip from SDCard
Flash GApps zip from SDCard
Reboot
Don't restore system data using Titanium Backup!
Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of CyanogenMod 12.1:
Copy CyanogenOS ZIP to your SDCard
Boot into Recovery
Flash CyanogenOS zip from SDCard
Reboot
ScreenShots
see next post
Credits
@winxuser I used your boot.img file (sorry I didnt ask permission first)
@Amcha team
@OnePlus
@Cyanogen Inc.
...
XDA:DevDB Information
CyanogenOS 12.1S, ROM for the Samsung Galaxy S III I9300
Contributors
achrafi9305
ROM OS Version: 5.1.x Lollipop
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: v2
Beta Release Date: 2015-05-08
Created 2015-05-02
Last Updated 2015-05-08
Screenshots
see attachements
Are there any important differences to normal CM?
dawidd6 said:
Are there any important differences to normal CM?
Click to expand...
Click to collapse
basicly it is the same but this one seems the same as official CyanogenOS in OnePlusOne maybe there are many additions specially the apps and hexo theme...
Beta 1 uploaded
https://mega.co.nz/#!VRkSCRYJ!Hh8LZHpx_vKpOrxMEAJWCMwVCM4IUxVnUucv41ipNIk
I need testers !
You do not quit just like the previous?
It promises to be fun ...
krakowiak84 said:
You do not quit just like the previous?
It promises to be fun ...
Click to expand...
Click to collapse
previously I got problems finishing builds!
but now I got it successfully now ! but the build might contain many problems ! we need to fix them together
achrafi9305 said:
previously I got problems finishing builds!
but now I got it successfully now ! but the build might contain many problems ! we need to fix them together
Click to expand...
Click to collapse
In the evening, I check what works and what does not ...
Screen looks cute with the camera
What kernel will work?
krakowiak84 said:
In the evening, I check what works and what does not ...
Screen looks cute with the camera
What kernel will work?
Click to expand...
Click to collapse
I am not sure about kernels ! Agni 2.9.1 didnt work for me ! try latest agni.
achrafi9305 said:
I am not sure about kernels ! Agni 2.9.1 didnt work for me ! try latest agni.
Click to expand...
Click to collapse
OK I download and test
The installation went normally.
Does not read sim card ..
GSM network does not work
New camera and gallery nicely presented
OK thanks for testing!
I finished beta 2 build with fixed baseband ( I hope so I need someone to tell me if it is fixed or not) I am uploading it now
Don't you own this device? Do you have your sources on github?
rodman01 said:
Don't you own this device? Do you have your sources on github?
Click to expand...
Click to collapse
I own this device but I use it so much at work so I need it to be stable !
Sorry I cnat upload sources to github simply because my internet is so slow (even uploading the rom file takes long time)
New Rom is coming!
In addition to this rom,I am trying to get temasek unofficial cm12.1 rom as well
achrafi9305 said:
In addition to this rom,I am trying to get temasek unofficial cm12.1 rom as well
Click to expand...
Click to collapse
That would be awesome, Temasek's rom was one of the best for s3 :good:
dark'em said:
That would be awesome, Temasek's rom was one of the best for s3 :good:
Click to expand...
Click to collapse
lets hope I can build it ! I got a first build but it gave me a flashing error! I ll try to figure it out
Can someone testing the rom please tell me if you try to add a wifi point with EAP security, does the SIM option appear in eap method?
The installation went normal.
Appstore and stuff worked.
Bugs i found before switching back:
When someone called me, i couldnt accept nor deny the call i could only send a generic sms.
This would not have been so bad, but the Phone did not stop ringing only a restart of the Device could fix it.
The other Bug i've found.
I am an Ingress Player so i was bad that the GPS did not work (properly/at all)
The app showed me for 10 secounds in the wrong Position 300M away and then went off completely.
So i hope that helped
Keep up the good work.
Max
Incom1ng said:
The installation went normal.
Appstore and stuff worked.
Bugs i found before switching back:
When someone called me, i couldnt accept nor deny the call i could only send a generic sms.
This would not have been so bad, but the Phone did not stop ringing only a restart of the Device could fix it.
The other Bug i've found.
I am an Ingress Player so i was bad that the GPS did not work (properly/at all)
The app showed me for 10 secounds in the wrong Position 300M away and then went off completely.
So i hope that helped
Keep up the good work.
Max
Click to expand...
Click to collapse
GPS errors are quite regular on 5.1 it's common to all cm based rom as the call error, i have it on cm12 nightly
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Introduction
I use Lineage for my Moto Z, and was bummed out that I wasn't going to get any security updates. So, I decided to learn how to build it myself!
I'm no coder, and I have mad respect for those who actually code and make all of these ROMs possible. That being said, all I know how to do is build the thing from the Lineage repos. I CANNOT FIX BUGS. Period. I would if I could, but I simply don't know how. I can try tiny, very small things, but no guarantees.
I plan on trying to upload builds monthly as time permits, but I have a full time job and other obligations, so it may be irregular. But I like updates as much as everyone, so I'll do my best to build as often as I can.
Click to expand...
Click to collapse
Installation instructions
Flash using latest TWRP. Upgrades, or "dirty flashes", should be fine between builds.
If you are coming from Lineage 14.1 Official builds, you must first flash the migration zip. The installer won't work when working with different keys. Find it here
Make sure to flash Gapps BEFORE you reboot.
Click to expand...
Click to collapse
Changelog
2017-1-20
-Re-forked repo for easy syncing to Lineage official
-January 5 Security Patch
Click to expand...
Click to collapse
Not Working
-You Tell Me
Click to expand...
Click to collapse
Downloads
Lineage 14.1 UNOFFICIAL
FAQ
*Can you fix this bug?
-Probably not
*Can you do more frequent/daily/hourly builds?
-No
*It's not working!
-Please post your build version & information so I can check if it's a bad build, or if something broke in the code
Click to expand...
Click to collapse
Thanks To/Credits
* @Alberto97 , for his awesome work on our device & for providing the fixes that never went into the official build
* Lineage OS Team
Click to expand...
Click to collapse
Donations are appreciated, but certainly not necessary:
Litecoin: LV94DBg14pxNE4SSReKEhcCJKr5ee42o6H
Dogecoin: DCzWV2QimjpwYz73rXbc4UjEdw7yWCCES3
Click to expand...
Click to collapse
Additional source links:
https://github.com/zander21510/android_kernel_motorola_msm8953
https://github.com/zander21510/android_device_motorola_addison
XDA:DevDB Information
Lineage 14.1 Unofficial for Addison, ROM for the Moto Z Play
Contributors
zander21510
Source Code: https://github.com/LineageOS/android.git
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: Lineage
Version Information
Status: Alpha
Created 2017-12-30
Last Updated 2017-01-20
News & Updates
CHANGELOG:
2017-1-20
-Re-forked repo for easy syncing to Lineage official
-January 5 Security Patch
2017-1-5
-Forked repo from Alberto97's sources
-Fixed camera issue, now using Motorola proprietary repo
-Changed fingerprint sleep to act as home button instead (my personal preference!)
2016-12-30
-Initial build
-Camera not working
could you please add 0xC113 bootloader support? from Alberto's AOSP fix I take it shouldn't be a hard fix to make:
-require version-bootloader=0xC105|0xC106|0xC107|0xC112
+require version-bootloader=0xC105|0xC106|0xC107|0xC112|0xC113
zander21510 said:
Retried build using Alberto97's sources from 14.1-next- camera still broken. I'm guessing it has something to do with a change in the Lineage source code, but I really have no idea. Other than that, everything else seems to be working fine. If anyone wants to give me a lead on the camera problem, maybe I can do something about it.
Click to expand...
Click to collapse
Just to be clear, I assume by broken camera you mean camera on a system level, affecting any use of camera by any application, right ?
Ultramanoid said:
Just to be clear, I assume by broken camera you mean camera on a system level, affecting any use of camera by any application, right ?
Click to expand...
Click to collapse
as far as I can tell, yes. I'm doing another build today to see if there's anything I can do about it
zander21510 said:
as far as I can tell, yes. I'm doing another build today to see if there's anything I can do about it
Click to expand...
Click to collapse
Wonder what they could have changed over at Lineage to break it, since camera stuff is pretty device-specific and no one is working on this device now. Good luck at any rate.
taking some baby steps with developing! I forked Alberto97's repos and made a couple of changes...including this one:
WebmonkeyJMK said:
could you please add 0xC113 bootloader support? from Alberto's AOSP fix I take it shouldn't be a hard fix to make:
-require version-bootloader=0xC105|0xC106|0xC107|0xC112
+require version-bootloader=0xC105|0xC106|0xC107|0xC112|0xC113
Click to expand...
Click to collapse
I'll do some testing and upload a build later today
New build with fixed camera and Nov 17 bootloader support.
zander21510 said:
Introduction
Installation instructions
Changelog
Not Working
Downloads
Lineage 14.1 UNOFFICIAL
FAQ
Thanks To/Credits
Donations are appreciated, but certainly not necessary:
Additional source links:
https://github.com/zander21510/android_kernel_motorola_msm8953
https://github.com/zander21510/android_device_motorola_addison
XDA:DevDB Information
Lineage 14.1 Unofficial for Addison, ROM for the Moto Z Play
Contributors
zander21510
Source Code:https://github.com/LineageOS/android.git
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: Lineage
Version Information
Status: Alpha
Created 2017-12-30
Last Updated 2017-01-05
Click to expand...
Click to collapse
Thanks for your effort man. I really appreciate it. Can you tell me what the security patch level is though?
Mr_prfssnl said:
Thanks for your effort man. I really appreciate it. Can you tell me what the security patch level is though?
Click to expand...
Click to collapse
Still on Dec 5, guess the Jan patch hasn't been merged yet.
So trying to get some things working on my daily driver...my company uses Microsoft Intune Company Portal for access to my work email, which does the standard root checking & etc. On the last official Lineage build, it worked just fine so long as root was shut off in developer tools (if the root zip was installed).
One thing it does which is a bit irritating is that it seems to assume your phone is rooted if you use a rom with test keys, which would be all unofficial builds by default, including mine. So in order to get my work email I'm making signed builds for myself along with the regular unsigned builds. If anyone is interested I can upload signed builds here in case you have some reason you need a signed build. Other than that, I'm not sure there's really any advantage to having a signed build vs an unsigned one. One big disadvantage, you can't migrate to or from any other builds, so you'd be stuck with me unless you wipe
zander21510 said:
One big disadvantage, you can't migrate to or from any other builds, so you'd be stuck with me unless you wipe
Click to expand...
Click to collapse
Here are the scripts to migrate from unsigned to signed or the other way around, to dirty-flash without issue :
https://forum.xda-developers.com/showpost.php?p=70452245&postcount=2
Ultramanoid said:
Here are the scripts to migrate from unsigned to signed or the other way around, to dirty-flash without issue :
https://forum.xda-developers.com/showpost.php?p=70452245&postcount=2
Click to expand...
Click to collapse
From what I understand, these only work if you're going between Lineage keys and test keys, not any other keys
Is ther any way to get substratum themes working on this rom i have tried oms and lineage selection but nothing is getting themed.
zander21510 said:
From what I understand, these only work if you're going between Lineage keys and test keys, not any other keys
Click to expand...
Click to collapse
You're right, what was I thinking...
How did you get updated proprietary blobs?
zander21510 said:
Forked Alberto97s device & kernel so I could try and fix bugs, and also started using a different repo for the proprietary blobs, that fixed the camera issue! So now it looks like everything is working, android security patch is still on Dec 5 though, but everything else is current. Let me know if there are issues
Click to expand...
Click to collapse
Thanks for this (and to Alberto97, if you're out there...).
Like you, I finally couldn't take it any more and began building on my own. I, too, had a fully functional phone except for the camera.
I jumped through a few hoops trying to get the proprietary blobs, and finally scraped them out of your build. I installed XT1635-02_ADDISON_7.1.1_NPNS26.118-22-2-8_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC and tried extract-files.sh but that didn't get everything. I didn't try a deeper look, as I was eager to get my phone working again. I unzipped your ROM and extract-files.sh worked. I rebuilt and now the camera works with my build.
How did you get those blobs? Also, do you know if Motorola publishes stock ROMs for addison, or do we always have to get them second-hand from something like lolinet?
Thanks in advance for any info. I'm probably not worthy of taking responsibility after the loss of Alberto97, but I'd be willing to lend a hand or coordinate the effort somehow.
MIke
mikehat said:
Thanks for this (and to Alberto97, if you're out there...).
Like you, I finally couldn't take it any more and began building on my own. I, too, had a fully functional phone except for the camera.
I jumped through a few hoops trying to get the proprietary blobs, and finally scraped them out of your build. I installed XT1635-02_ADDISON_7.1.1_NPNS26.118-22-2-8_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC and tried extract-files.sh but that didn't get everything. I didn't try a deeper look, as I was eager to get my phone working again. I unzipped your ROM and extract-files.sh worked. I rebuilt and now the camera works with my build.
How did you get those blobs? Also, do you know if Motorola publishes stock ROMs for addison, or do we always have to get them second-hand from something like lolinet?
Thanks in advance for any info. I'm probably not worthy of taking responsibility after the loss of Alberto97, but I'd be willing to lend a hand or coordinate the effort somehow.
MIke
Click to expand...
Click to collapse
I just added this repo (https://github.com/TheMuppets/proprietary_vendor_motorola) to the manifest, you can do that in lieu of the "extract proprietary blobs" step. I noticed there was a fork of it on Alberto97's github (but it was out of date), so I poked around and found TheMuppets one was still being updated, including fixes for addison. So made a build and presto- no more camera issues.
I guess there's some gray legal area when it comes to the proprietary Motorola stuff, that's why it's not listed as an option in the official Lineage build instructions.
Its back to official status https://wiki.lineageos.org/devices/addison
tabletmen said:
Its back to official status https://wiki.lineageos.org/devices/addison
Click to expand...
Click to collapse
It doesn't have a maintainer!
I have problems with the WiFi not turning on
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Pie builds based on Xiaomi.eu Mi 6x builds
Ten builds based on Xiaomi.eu Redmi Note 7 builds
This ROM flashes to your current slot and includes TWRP
no need to change the slot after flashing and no need to flash TWRP or Gapps, just flash and reboot
flashing instructions:
1- Boot TWRP
2- flash the rom
3- flash Magisk (optional)
4- reboot and enjoy
ROM includes full F2FS support
Kernel source:
https://github.com/nebrassy/android_kernel_xiaomi_sdm660
Telegram:
https://t.me/NSSFB
Download:
https://androidfilehost.com/?w=files&flid=294602
Download for wayne:
https://www.androidfilehost.com/?w=files&flid=305840
XDA:DevDB Information
MIUI 12, ROM for the Xiaomi Mi A2
Contributors
Nebrassy, rcstar6696
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Current Stable Version: 12.0.1.0
Stable Release Date: 2020-07-27
Current Beta Version: 20.8.20
Beta Release Date: 2020-08-24
Created 2019-05-25
Last Updated 2020-08-24
Reserved
Reserved
Definitely gonna try this, keep up the good work!
Thank you so much man. I tried it and working great. Camera quality is bit down compared to stock camera but it doesn't matter to me. Once again thank you so much for all your efforts.
Screenshots ?
akshaygalaxystarmod said:
Screenshots ?
Click to expand...
Click to collapse
Man its MIUI ?
akshaygalaxystarmod said:
Screenshots ?
Click to expand...
Click to collapse
hey, use google lol
Reserve
Been using the rom since release, and it's been very stable, some occasional stuttering but nothing serious,,
The only major issue o face is no 4k video recording in the included camera
fir1996 said:
Been using the rom since release, and it's been very stable, some occasional stuttering but nothing serious,,
The only major issue o face is no 4k video recording in the included camera
Click to expand...
Click to collapse
Already fixed in the next build, i'll release once i solve the fastboot problem
fir1996 said:
Been using the rom since release, and it's been very stable, some occasional stuttering but nothing serious,,
The only major issue o face is no 4k video recording in the included camera
Click to expand...
Click to collapse
edit system/build.prop and change ro.product.device to wayne
Great to hear that ?
Nebrassy said:
Already fixed in the next build, i'll release once i solve the fastboot problem
Click to expand...
Click to collapse
Thanks i really like the rom, keep up
MIUI is bloated right? How about it battery? Is it the same as custom ROMs like AEX?
Thank you for bringing MIUI 10!! i was missing the rom since i got the A2. Let me see how the battery holds for the full day! Everything else seems to work fine, can u add the a2 camera as an addon like its there in the other custom rom?
which kernel can we flash on this? can we take the 6x kernel?
Great rom, i do t have any bug. Good battery, root, gcam, magisk etc..good work !
Hellrazoraj said:
Thank you for bringing MIUI 10!! i was missing the rom since i got the A2. Let me see how the battery holds for the full day! Everything else seems to work fine, can u add the a2 camera as an addon like its there in the other custom rom?
which kernel can we flash on this? can we take the 6x kernel?
Click to expand...
Click to collapse
Miui camera is included, and no other kernels will work
Hellrazoraj said:
Thank you for bringing MIUI 10!! i was missing the rom since i got the A2. Let me see how the battery holds for the full day! Everything else seems to work fine, can u add the a2 camera as an addon like its there in the other custom rom?
which kernel can we flash on this? can we take the 6x kernel?
Click to expand...
Click to collapse
if you are asking for watermark it needs a lot of process which i cant figure it out. also changing dualwatermark.png doesnt work. it is something to do with camera apk
q0kHaN said:
edit system/build.prop and change ro.product.device to wayne
Click to expand...
Click to collapse
now i only have full hd 30fps recording :\
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
MoKee OpenSource is based on the Google AOSP. We update our source code frequently to keep up with the latest development, and not forgetting to merge in special features of our own at the same time.
A small group of people from around the world who are interested in Android launched this project on the 12th of December 2012, and is committed to make this ROM better and better. Like most contributors of open source projects (Omni, CyanogenMod, Slim AOSPA etc), we are doing all these in our free time as our passion...
Since this project is open source, anyone interested can participate in the development (maintain new devices, contribute code etc). Newcomers are always welcomed!
Read here for developer application; with this, you can host your unofficial MoKee builds on our server!
Important information:
This thread is for official MoKee 10.0 builds for OnePlus 3/3T. The following will not be supported here:
Custom kernels
Mods
Xposed
We don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Modified system files
Tips:
You need at least OxygenOS 9.0.2 firmware, otherwise you'll get error 7 when installing the zip. Latest firmware is recommended.
Installation:
First time flashing MoKee 10.0 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery (Due to system-as-root, you may encounter minor issues with official TWRP. The following custom TWRP uses system-as-root and is highly recommended: https://androidfilehost.com/?fid=4349826312261695823) Note that it's NOT compatible with pre-10 ROMs!
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash MoKee
Optional: Install the Google Apps addon package
Reboot
Source code:
https://github.com/mokee
Credits:
MoKee Developers: https://github.com/orgs/MoKee/members
Code Aurora Forum
LineageOS
AOSP
Slim Roms
OmniROM
......
Download:
https://download.mokeedev.com/?device=oneplus3
XDA:DevDB Information
MoKee, ROM for the OnePlus 3
Contributors
dianlujitao
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
Version Information
Status: Nightly
Created 2020-01-16
Last Updated 2020-01-16
dianlujitao said:
...
Optional: Install the Google Apps addon package
...
Click to expand...
Click to collapse
Which Gapps is recommended? I couldn't find a Gapps package on Mokee site.
Sent from my OnePlus3T using XDA Labs
Do i need to install every nightly by ota or can i skip?
BillGoss said:
Which Gapps is recommended? I couldn't find a Gapps package on Mokee site.
Click to expand...
Click to collapse
EDIT: They aren't on the site :silly: , I just saw "Open Gapps" in the official site... I would install Open Gapps then as security measure
Master_TC said:
Do i need to install every nightly by ota or can i skip?
Click to expand...
Click to collapse
you can skip
deleted
Hello,
Why there are so few posts in this ROM? Anyone using it?
Can anyone tell is it stable to be used as a daily driver, any major problems?
Thank you.
ammarwajihi said:
Hello,
Why there are so few posts in this ROM? Anyone using it?
Can anyone tell is it stable to be used as a daily driver, any major problems?
Thank you.
Click to expand...
Click to collapse
i am using it, and daily driver rom, no major problems for now, good rom.
Kernel in enforced mode.
Rom encrypted
locked bootloader
helderfp said:
i am using it, and daily driver rom, no major problems for now, good rom.
Kernel in enforced mode.
Rom encrypted
locked bootloader
Click to expand...
Click to collapse
Oh! My bad it was just released today. Even on Pie thread, there are not many posts, so I was confused.
Thanks, man.
ammarwajihi said:
Oh! My bad it was just released today. Even on Pie thread, there are not many posts, so I was confused.
Thanks, man.
Click to expand...
Click to collapse
Post by dianlujitao made today but rom official released 2 days ago
60 Fps video recording, is it supported ?
helderfp said:
Post by dianlujitao made today but rom official released 2 days ago
Click to expand...
Click to collapse
Okay, and can you provide link gapps?
Gapps: https://sourceforge.net/projects/opengapps/files/arm64/beta/
This rom works on encrypted devices like LOS 16 right?
Thanks for your work @dianlujitao!!
zadock said:
This rom works on encrypted devices like LOS 16 right?
Thanks for your work @dianlujitao!!
Click to expand...
Click to collapse
Yes
Sent from my OnePlus3T using XDA Labs
Master_TC said:
Gapps: https://sourceforge.net/projects/opengapps/files/arm64/beta/
Click to expand...
Click to collapse
Thanks man
lost 20% battery over night. stand by drain very high
Rom is pretty good. But the fact is you have to donate to unlock all the customisations, and the fact that there are ads in mokee update centre really let me down from using this rom. I know running a server needs money and all, but including ads in inbuilt apps is a big no from me!
Sent from my ONEPLUS A3003 using Tapatalk
The rom is working great, all thanks to the developers. I wanted to know if there is a way to turn VOLTE on on this rom, thanks
Rajesh_m said:
Rom is pretty good. But the fact is you have to donate to unlock all the customisations, and the fact that there are ads in mokee update centre really let me down from using this rom. I know running a server needs money and all, but including ads in inbuilt apps is a big no from me!
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
Which customisations do you mean?
My LuisROM based on cdDroid V6.x for Xiaomi Redmi Note 4 (mido)
Code:
*** Disclamer
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
This is my personal custom rom. LuisROM based on the crDroid, LineageOS and other...
This is a ROM that works on Xiaomi Redmi Note 4 (mido) snapdrgon only! This ROM comes with a highly-customized kernel, as well as some other very custom modifications.
I will NOT provide support if you install a custom kernel!
Changelogs: http://luis-builds.de/downloads/lineageos/cr/Xiaomi_Redmi_Note_4_(mido)/changelog_mido.txt
Introduction
Hello Friends!
I had troubles to find current builds for my devices so I decided to make regular builds for my devices. When my friends told me about similar problems, I extended the builds to include their devices as well. So these builds were and are mainly for my friends and me, but I finally decided to provide them also for public download.
My ROMs
My LuisROM an awesome combination of performance, customization, power and the most new features, brought directly to your device. The LuisROM build server generates automaticly every 2nd days new builds directly from the sources.
Notice
Sometimes I get a lot of help or feature requests from users of my LuisROMs. My dog Luis and I try to fulfill most of the wishes, but that is not always possible. I do that as a little hobby and Luis does not always want to build ROMs . Please understand if I can not always answer directly.
ROM features:
Based on the latest cdDroid V6.x (Android 10), LineageOS and AOSP sources
Latest security patches and sources
OTA Updater
Compatible with EX Kernel Manager
Many other misc. performance and stability improvements under the hood
Kernel: Linux 3.18.x Kernel with many mods other devs and me (thanks for your incredible work!)
Removed lots of excessive bloat (improves security and performance)
Improved stability (several bugs not listed here have been fixed)
Boeffla Wakelock blocker driver V1.1.0
More I/O-Schedulers (fiops, sio, zen, maple)
Optimized for performance and battery life
Compatible with systemless root (recommend Magisk 20.x !!!)
Many other misc. improvements not listed here
Installation instructions:
Pre-installation:
OrangeFox Recovery of course (download here)
Tested with "V11.0.2.0.NCFMIXM Global" firmware. (download here)
Magisk 20.x and above (Link) can also be used just make sure you flash it after a first successful boot (after passed setup screen)
First time installation:
Unlock your bootloader
Install lates MIUI firmware (tested V11.0.2.0.NCFMIXM Global)
Flash recovery zip (TWRP)
Flash my latest LuisROM (download here)
Optional: Flash Open GApps and Magisk 20.x and above
Reboot and enjoy
OTA App update installation (auto):
Go to crDroid > About cdDroid > Updates
Press reload button (right corner)
Select download on the new build list
After download select update/flash new build
Optional: Installed gapps and magisk will be moved into new system automaticaly !
TWRP update installation (manual):
Download latest LuisROM build (download here)
Boot into Recovery TWRP
Flash my updated LuisROM (download here)
Reboot and enjoy
Download
Latest builds: (http://luis-builds.de/downloads/lineageos/cr/Xiaomi_Redmi_Note_4_(mido)/)
Latest MIUI firmware: (download)
My other devices/ROMs: (http://luis-builds.de/downloads/lineageos/)
Download OpenGapps: (http://opengapps.org)
Flash latest OrangeFox Recovery: (download here)
Changelog
Developer: http://luis-builds.de/downloads/lineageos/cr/Xiaomi_Redmi_Note_4_(mido)/changelog_mido.txt
Known Issus
..
Telegram group:
https://t.me/rr_luisrom
Donate for my dog Luis, he is looking forward to an extra bone:
https://bw2.link/LuisDonation
Thanks To/Credits
Special thanks to Teams:
LineageOS team: https://www.lineageos.org
crDroid Team: https://crdroid.net/
OMNI team https://omnirom.org/about/
SLIMROMS https://slimroms.org/#/about
topjohnwu (Magisk) https://forum.xda-developers.com/apps/magisk
Thanks to the best devs on earth:
LuK1337 (https://forum.xda-developers.com/member.php?u=5075128)
PeterCxy (https://forum.xda-developers.com/member.php?u=5351691)
francokernel (https://forum.xda-developers.com/member.php?u=3292224)
sultanxda (https://forum.xda-developers.com/member.php?u=4800121)
flar2 (https://forum.xda-developers.com/member.php?u=4684315)
nathanchance (https://forum.xda-developers.com/member.php?u=6842057)
zx2c4 for the wireguard vpn ROM Integration (https://forum.xda-developers.com/android/development/wireguard-rom-integration-t3711635)
phhusson for some blobs (https://github.com/phhusson)
and of course to all the supporters.
Thanks for the Sources/Blobs/Tweaks
zeelog (https://github.com/zeelog)
crDroid (https://github.com/LineageOS)
Omnirom (https://github.com/omnirom)
TheMuppets (https://github.com/TheMuppets)
ryan-andri (https://github.com/ryan-andri)
AliHasan7671 (https://github.com/A
My Sources/Blobs/Tweaks
DEVICE ([URL="https://github.com/FraEgg/android_device_xiaomi_mido_ze"]https://github.com/FraEgg/android_device_xiaomi_mido_ze
)
KERNEL (https://github.com/FraEgg/android_kernel_xiaomi_msm8953_ze)
XDA:DevDB Information
[ROM][MIDO][10]LuisROM Android 10 based on crDroid V6.x [TREBLE], ROM for the Xiaomi Redmi Note 4
Contributors
8224Freak
Source Code: https://github.com/FraEgg
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
ROM Firmware Required: V11.0.2.0.NCF
Based On: LineageOS, crDroid, AOSP
Version Information
Status: Stable
Stable Release Date: 2020-03-24
Beta Release Date: 2020-01-26
Created 2020-01-26
Last Updated 2020-03-24
Reserved
? nice work bro ?
FPS
what about goodix fingerprint?
AdamantiumBrain said:
what about goodix fingerprint?
Click to expand...
Click to collapse
There is no goodix in any rom with Android 10 on this phone, it is not compatible. Solution: buy an FPC sensor on aliexpress or others.
Battery draining faster than usual
I noticed my battery still getting drained a bit faster than usual even when its on deep sleep. Is this normal?
Hi, got a bootloop with the recent update. how do i fix it? Thank you
domz0413 said:
Hi, got a bootloop with the recent update. how do i fix it? Thank you
Click to expand...
Click to collapse
Nothing's wrong here
Try clean flash the latest build
domz0413 said:
Hi, got a bootloop with the recent update. how do i fix it? Thank you
Click to expand...
Click to collapse
+1
xcosby said:
+1
Click to expand...
Click to collapse
Not bootloop. But reboot itself after welcome screen after few sec. I think he made april fools
hanzoml099 said:
Not bootloop. But reboot itself after welcome screen after few sec. I think he made april fools
Click to expand...
Click to collapse
Yeah thinking the same lol
domz0413 said:
I noticed my battery still getting drained a bit faster than usual even when its on deep sleep. Is this normal?
Click to expand...
Click to collapse
Same for me, quite a lot of battery drain. Phone is in deep sleep most of the time, though. Using Ethereal kernel did not help. "Original" crDroid (20200312) seems to be a bit better, but not much.
Dirty flashing Havoc and other AOSP-based ROMs for comparison did not work, SIM is not detected and I am too lazy to restore all settings, reconnect Bluetooth devices etc.
hanzoml099 said:
Not bootloop. But reboot itself after welcome screen after few sec. I think he made april fools
Click to expand...
Click to collapse
Yea, thats what happened to me as well, it continuously reboots on itself when you swipe up on home screen. How do I update when a stable version gets released? I cant access update on settings. :’(
hanzoml099 said:
Not bootloop. But reboot itself after welcome screen after few sec. I think he made april fools
Click to expand...
Click to collapse
7pot said:
Same for me, quite a lot of battery drain. Phone is in deep sleep most of the time, though. Using Ethereal kernel did not help. "Original" crDroid (20200312) seems to be a bit better, but not much.
Dirty flashing Havoc and other AOSP-based ROMs for comparison did not work, SIM is not detected and I am too lazy to restore all settings, reconnect Bluetooth devices etc.
Click to expand...
Click to collapse
Try turning off location, its on by default. That helped with the draining for me. As for the other issues you’ve mentioned, none of them I’ve encountered so far. I believe the kernel used for this rom is great as I’ve been using all of his ROMs before and everything worked great for me. It’s understandable that the original crdroid itself is not yet 100% stable and still has a few bugs in it, lets just be patient and wait for future updates. All in all, his works will always be what I’d always use and look forward to.
domz0413 said:
Try turning off location, its on by default. That helped with the draining for me. As for the other issues you’ve mentioned, none of them I’ve encountered so far. I believe the kernel used for this rom is great as I’ve been using all of his ROMs before and everything worked great for me. It’s understandable that the original crdroid itself is not yet 100% stable and still has a few bugs in it, lets just be patient and wait for future updates. All in all, his works will always be what I’d always use and look forward to.
Click to expand...
Click to collapse
Location is already off, so that is not the cause of the drain. The battery still lasts two days, but it used to last for four or five days.
But apart from that, great work and thank you very much for still building a ROM for this device. LuisROM has been my daily driver for over two years now, really outstanding!
7pot said:
Location is already off, so that is not the cause of the drain. The battery still lasts two days, but it used to last for four or five days.
But apart from that, great work and thank you very much for still building a ROM for this device. LuisROM has been my daily driver for over two years now, really outstanding!
Click to expand...
Click to collapse
You didnt encounter the bug on the latest update?
The last two updates will restart your phone over and over again
domz0413 said:
You didnt encounter the bug on the latest update?
Click to expand...
Click to collapse
Tried it afterwards, same error as everybody else.
7pot said:
Tried it afterwards, same error as everybody else.
Click to expand...
Click to collapse
Is there any fix for this? Do we need to clean flash the rom? Dont wanna lose my files
Is the ROM built by bots? A lot has been complaining about the not booting issue on latest updates for this week. Hope devs look into it. Very promising ROM otherwise.